BS 5872:1980. Specification for locks and latches for doors in buildings
BS 5873-1:1980. Educational furnitureSpecification for functional dimensions, identification and finish of chairs and tables for educational institutions
BS 5873-2:1980. Educational furniture.Specification for strength and stability of chairs for educational institutions
BS 5873-2:1991. Educational furnitureSpecification for strength and stability of chairs for educational institutions
BS 5873-3:1985. Educational furnitureSpecification for strength and stability of tables for educational institutions
BS 5873-4:1991. Educational furnitureSpecification for strength and stability of storage furniture for educational institutions
BS 5873-4:1998. Educational furnitureSpecification for strength and stability of storage furniture for educational institutions
BS 5873-5:1998. Educational furnitureSpecification for security of fixed secure storage furniture for educational institutions
BS 5874:1980, IEC 60156:1963. Method for determination of the electric strength of insulating oils
BS 5875:1980, ISO 4006-1977. Glossary of terms and symbols for measurement of fluid flow in closed conduits
BS 5876:1980. Guide for subjective viewing tests for television receivers
BS 5877:1980. Guide for subjective listening tests for sound radio receivers
BS 5878:1980, ISO 4119-1978. Method for determination of stock concentration of pulps (rapid method)
BS 5879:1980, ISO 5635-1978. Method for measurement of dimensional change of paper after immersion in water
BS 5880:1982, ISO 5637-1978. Method for determination of water absorption and increase in thickness of paper and board after immersion in water
BS 5880:1990, ISO 5637:1989. Method for determination of water absorption of paper and board after immersion in water
BS 5881:1980, ISO 5638-1978. Method for determination of grammage of single layers of solid fibreboard
BS 5882:1980. Specification for a total quality assurance programme for nuclear installations
BS 5882:1990. Specification for a total quality assurance programme for nuclear installations
BS 5882:1996. Specification for a total quality assurance programme for nuclear installations
BS 5883:1980. Specification for surface swimming goggles
BS 5883:1996. Specification for surface swimming goggles
BS 5884:1980. Methods of test for determination of d.c. magnetic properties of magnetic materials
BS 5884:1987. Methods for determination of relative magnetic permeability of feebly magnetic materials
BS 5884:1999. Magnetic materials. Methods for the determination of the relative magnetic permeability of feebly magnetic materials
BS 5885-1:1980. Automatic gas burners.Specification for industrial gas burners of input rating 60 kW and above
BS 5885-1:1988. Automatic gas burnersSpecification for burners with input rating 60 kW and above
BS 5885-2:1987. Automatic gas burnersSpecification for packaged burners with input rating 7.5 kW up to but excluding 60 kW
BS 5886:1980, ISO 4483-1979. Methods for field pressure testing of asbestos-cement pipelines
BS 5887:1980. Code of practice for testing of computer-based systems
BS 5889:1980. Specification for silicone based building sealants
BS 5889:1989. Specification for one-part gun grade silicone-based sealants
BS 5890:1980, IEC 60425:1973. Guide for choice of colours to be used for the marking of capacitors and resistors
BS 5891:1980. Specification for ring-type hitches on agricultural trailers and towed implements
BS 5892-1:1983. Railway rolling stock material (metric).Specification for axles for traction and trailing stock
BS 5892-1:1992+A3:2009. Railway rolling stock materialsSpecification for axles for traction and trailing stock
BS 5892-2:1987. Railway rolling stock material (metric).Specification for forged and rolled wheel centres
BS 5892-2:1992. Railway rolling stock materialsSpecification for forged and rolled wheel centres
BS 5892-3:1982. Railway rolling stock material (metric).Specification for monobloc wheels for traction and trailing stock
BS 5892-3:1992+A2:2009. Railway rolling stock materialsSpecification for monobloc wheels for traction and trailing stock
BS 5892-4:1986. Railway rolling stock material (metric).Specification for tyres
BS 5892-4:1992. Railway rolling stock materialsSpecification for forged and rolled tyres
BS 5892-5:1987+A2:2008. Railway rolling stock material (metric)Specification for steel bars for retaining rings for tyred wheels
BS 5892-6:1980. Railway rolling stock material (metric).Specification for wheelsets for traction and trailing stock
BS 5892-6:1992. Railway rolling stock materialsSpecification for wheelsets for traction and trailing stock
BS 5892-8:2012. Railway rolling stock materialsRailway applications. Wheelsets and bogies. Powered and non-powered wheelsets with inboard bearings. Product requirements
BS 5893:1980, ISO 2340-1972. Specification for clevis pins without heads. Metric series
BS 5894:1980, ISO 2341-1972. Specification for clevis pins with heads. Metric series
BS 5895:1980, ISO 4803-1978. Specification for borosilicate glass tubing for laboratory apparatus
BS 5896:1980. Specification for high tensile steel wire and strand for the prestressing of concrete
BS 5896:2012. High tensile steel wire and strand for the prestressing of concrete. Specification
BS 5898:1980, ISO 384:1978. Specification for principles of design and construction of volumetric glassware for laboratory use
BS 5899:1980, ISO 2626-1973. Method for hydrogen embrittlement test for copper
BS 5900:1980. Specification for powered homelifts
BS 5900:1991. Specification for powered domestic lifts
BS 5900:1999. Specification for powered domestic lifts with partially enclosed cars and no lift-well enclosures
BS 5900:2012. Powered homelifts with partially enclosed carriers and no liftway enclosures. Specification
BS 5901:1980, IEC 60112:1979. Method of test for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
BS 5902:1980. Specification for black and coloured pitch mastic flooring
BS 5903:1980. Method for determination of resistance to intergranular corrosion of austenitic stainless steels: copper sulphate-sulphuric acid method (Moneypenny Strauss test)
BS 5904:1980. Specification for computer programming language RTL/2
BS 5905:1980. Specification for computer programming language CORAL 66
BS 5906:1980. Code of practice for storage and on-site treatment of solid waste from buildings
BS 5906:2005. Waste management in buildings. Code of practice
BS 5908:1980. Code of practice for fire precautions in chemical plant
BS 5908:1990. Code of practice for fire precautions in the chemical and allied industries
BS 5908-1:2012. Fire and explosion precautions at premises handling flammable gases, liquids and dustsCode of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises
BS 5908-2:2012. Fire and explosion precautions at premises handling flammable gases, liquids and dustsGuide to applicable standards and regulations
BS 5909:1980, ISO 4746-1977. Method for scale adhesion test for oxygen-free copper
BS 5910-1:1980, ISO 4211-1979. Methods of test for surface finishes for furnitureAssessment of surface resistance to cold liquids
BS 5911-1:1981. Precast concrete pipes, fittings and ancillary productsSpecification for pipes and fittings with flexible joints and manholes
BS 5911-1:2002+A2:2010. Concrete pipes and ancillary concrete productsSpecification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002)
BS 5911-100:1988. Precast concrete pipes, fittings and ancillary productsSpecification for unreinforced and reinforced pipes and fittings with flexible joints
BS 5911-101:1988. Precast concrete pipes, fittings and ancillary productsSpecification for glass composite concrete (GCC) pipes and fittings with flexible joints
BS 5911-103:1994. Precast concrete pipes, fittings and ancillary productsSpecification for prestressed non-pressure pipes and fittings with flexible joints
BS 5911-110:1992. Precast concrete pipes, fittings and ancillary productsSpecification for ogee pipes and fittings (including perforated)
BS 5911-114:1992. Precast concrete pipes, fittings and ancillary productsSpecification for porous pipes
BS 5911-120:1989. Precast concrete pipes, fittings and ancillary productsSpecification for reinforced jacking pipes with flexible joints
BS 5911-2:1982. Precast concrete pipes, fittings and ancillary productsSpecification for inspection chambers
BS 5911-200:1989. Precast concrete pipes, fittings and ancillary productsSpecification for unreinforced and reinforced manholes and soakaways of circular cross section
BS 5911-200:1994. Precast concrete pipes, fittings and ancillary productsSpecification for unreinforced and reinforced manholes and soakaways of circular cross section
BS 5911-230:1994. Precast concrete pipes, fittings and ancillary productsSpecification for road gullies and gully cover slabs
BS 5911-3:1982. Precast concrete pipes, fittings and ancillary productsSpecification for pipes and fitting with ogee joints
BS 5911-3:2002. Concrete pipes and ancillary concrete productsSpecification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002)
BS 5911-3:2010. Concrete pipes and ancillary concrete productsSpecification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002)
BS 5911-4:2002+A2:2010. Concrete pipes and ancillary concrete productsSpecification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002)
BS 5911-5:2004+A1:2010. Concrete pipes and ancillary concrete productsSpecification for prestressed non-pressure pipes and fittings with flexible joints
BS 5911-6:2004+A1:2010. Concrete pipes and ancillary concrete productsSpecification for road gullies and gully cover slabs
BS 5912:1980, ISO 4203-1978. Specification for dimensions of driving tenons and sockets for parallel shank drills and machine reamers
BS 5913:1980, IEC 60627:1978. Method of measuring and defining the characteristics of anti-scatter grids used in X-ray equipment
BS 5914:1980, ISO 3530-1979. Methods of calibrating leak-detectors of the mass-spectrometer-type used in the field of vacuum technology
BS 5915:1980, IEC 60600:1979. Specification for equipment for minehead assay and sorting radioactive ores in containers
BS 5916:1980, ISO 5651:1978. Specification for units for expressing properties of paper, board and pulps
BS 5917:1980. Specification for conformal coating material for use on printed circuit assemblies
BS 5918:1980. Code of practice for solar heating systems for domestic hot water
BS 5918:1989. Code of practice for solar heating systems for domestic hot water
BS 5919:1980. Specification for children's anoraks
BS 5919:1991. Specification for children's anoraks
BS 5920:1980. Method for determination of dimensions of textile floor covering test specimens
BS 5921:1980. Methods for determination of size, squareness and straightness of edge of textile floor covering tiles
BS 5922:1980, ISO 4799-1978. Specification for glass condensers for laboratory use
BS 5923-1:1980, ISO 247-1978. Methods for chemical analysis of rubber.Determination of ash
BS 5923-2:1980. Methods for chemical analysis of rubberEDTA titrimetric method for determination of zinc content of rubber products
BS 5923-3:1981. Methods for chemical analysis of rubber.Determination of volatile matter content of raw rubbers
BS 5924:1980. Specification for safety requirements for electrical equipment of machines for resistance welding and allied processes
BS 5924:1989, EN 50063:1989. Specification for safety requirements for the construction and the installation of equipment for resistance welding and allied processes
BS 5925:1980. Code of practice for design of buildings: ventilation principles and designing for natural ventilation
BS 5925:1991. Code of practice for ventilation principles and designing for natural ventilation
BS 5926:1980, ISO 3687-1976. Method for determination of air resistance (Gurley) of paper and board
BS 5927:1980, ISO 4482-1979. Guide for laying of asbestos-cement pipelines
BS 5928:1980, ISO 4796-1977. Specification for bottles for laboratory use
BS 5929-1:1980. Methods for sensory analysis of food.Introduction and general guide to methodology
BS 5929-1:1986, ISO 6658-1985. Methods for sensory analysis of food.General guide to methodology
BS 5929-10:1999, ISO 11037:1999. Methods for sensory analysis of foodGeneral guidance and test method for assessment of the colour of foods
BS 5929-2:1982. Methods for sensory analysis of food.Paired comparison test
BS 5929-3:1984, ISO 4120-1983. Methods for sensory analysis of food.Triangular test
BS 5929-4:1986, ISO 6564-1985. Methods for sensory analysis of food.Flavour profile methods
BS 5929-5:1988, ISO 8588-1987. Methods for sensory analysis of food.'A'-'not A' test
BS 5929-6:1989, ISO 8587:1988. Methods for sensory analysis of food.Ranking
BS 5929-7:1992, ISO 3972:1991. Methods for sensory analysis of food.Investigating sensitivity of taste
BS 5929-8:1992, ISO 10399:1991. Methods for sensory analysis of foodDuo-trio test
BS 5929-9:1992, ISO 5496:1992. Methods for sensory analysis of food.Initiation and training of assessors in the detection and recognition of odours
BS 593:1974. Specification for laboratory thermometers
BS 593:1989. Specification for laboratory thermometers
BS 5930:1981. Code of practice for site investigations
BS 5930:1999+A2:2010. Code of practice for site investigations
BS 5931:1980. Code of practice for machine laid in situ edge details for paved areas
BS 5932:1980. Specification for sealed nickel-cadmium cylindrical rechargeable single cells
BS 5933:1980, ISO 6055-1979. Specification for overhead guards for high-lift rider trucks
BS 5934:1980, ISO 5048:1979. Method for calculation of operating power and tensile forces in belt conveyors with carrying idlers on continuous mechanical handling equipment
BS 5935:1980, IEC 60635:1978. Specification for toroidal strip-wound cores made of magnetically soft material
BS 5936:1981. Specifications for chemicals used in schools
BS 5937-1:1980, IEC 60641-1:1979. Pressboard and presspaper for electrical purposesDefinitions and general requirements
BS 5937-2:1980, IEC 60641-2:1979. Pressboard and presspaper for electrical purposesMethods of test
BS 5938-1:1984, IEC 60367-1:1982. Cores for inductors and transformers for telecommunicationsMethods of measurement
BS 5938-2:1980, IEC 60367-2:1974,IEC 60367-2A:1976. Cores for inductors and transformers for telecommunicationsGuide to the drafting of performance specifications
BS 5939:1980, ISO 5527/1-1979. Glossary of terms for cereals and cereal products
BS 5939:1995, ISO 5527:1995. Glossary of terms for cereals and cereal products
BS 5940-1:1980. Office furnitureSpecification for design and dimensions of office workstations, desks, tables and chairs
BS 5941:1980, IEC 60655:1979. Specification for values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones
BS 594-1:1985. Hot rolled asphalt for roads and other paved areas.Specification for constituent materials and asphalt mixtures
BS 594-1:1992. Hot rolled asphalt for roads and other paved areasSpecification for constituent materials and asphalt mixtures
BS 594-1:2002. Hot rolled asphalt for roads and other paved areasSpecification for constituent materials and asphalt mixtures
BS 594-1:2003. Hot rolled asphalt for roads and other paved areasSpecification for constituent materials and asphalt mixtures
BS 594-1:2005. Hot rolled asphalt for roads and other paved areasSpecification for constituent materials and asphalt mixtures
BS 594-2:1985. Hot rolled asphalt for roads and other paved areasSpecification for the transport, laying and compaction of rolled asphalt
BS 594-2:1992. Hot rolled asphalt for roads and other paved areasSpecification for the transport, laying and compaction of rolled asphalt
BS 594-2:2002. Hot rolled asphalt for roads and other paved areasSpecification for transport, laying and compaction of hot rolled asphalt
BS 594-2:2003. Hot rolled asphalt for roads and other paved areasSpecification for transport, laying and compaction of hot rolled asphalt
BS 5942-1:1980, IEC 60581-1:1977. High fidelity audio equipment and systems; minimum performance requirements.Specification for general requirements
BS 5942-11:1989, IEC 60581-11:1981. High fidelity audio equipment and systems; minimum performance requirementsSpecification for high fidelity systems for use in vehicles (for example, motor cars); general requirements
BS 5942-12:1989, IEC 60581-12:1988. High fidelity audio equipment and systems; minimum performance requirementsSpecification for the sound output of television tuners
BS 5942-13:1989, IEC 60581-13:1988. High fidelity audio equipment and systems; minimum performance requirementsSpecification for high fidelity systems for use in vehicles (for example, motor cars); FM radio tuner units
BS 5942-2:1987, IEC 60581-2:1986. High fidelity audio equipment and systems; minimum performance requirementsSpecification for FM radio tuners
BS 5942-3:1980, IEC 60581-3:1979. High fidelity audio equipment and systems; minimum performance requirementsSpecification for record playing equipment and cartridges
BS 5942-4:1981, IEC 60581-4:1979. High fidelity audio equipment and systems; minimum performance requirementsSpecification for magnetic recording and reproducing equipment
BS 5942-5:1983, IEC 60581-5:1981. High fidelity audio equipment and systems; minimum performance requirementsSpecification for microphones
BS 5942-6:1980, IEC 60581-6:1979. High fidelity audio equipment and systems; minimum performance requirementsSpecification for amplifiers
BS 5942-7:1987, IEC 60581-7:1981. High fidelity audio equipment and systems; minimum performance requirements.Specification for loudspeakers
BS 5942-8:1987, IEC 60581-8:1986. High fidelity audio equipment and systems; minimum performance requirements.Specification for combination equipment
BS 5943:1980. Methods for measurement and recording for orthopaedic footwear
BS 5944-1:1980, ISO 4412/1-1979. Measurement of airborne noise from hydraulic fluid power systems and components.Method of test for pumps
BS 5944-1:1992, ISO 4412-1:1991. Measurement of airborne noise from hydraulic fluid power systems and components.Method of test for pumps
BS 5944-2:1980. Measurement of airborne noise from hydraulic fluid power systems and components.Method of test for motors
BS 5944-2:1992, ISO 4412-2:1991. Measurement of airborne noise from hydraulic fluid power systems and components.Method of test for motors
BS 5944-3:1980. Measurement of airborne noise from hydraulic fluid power systems and components.Guide to the application of Part 1 and Part 2
BS 5944-4:1984. Measurement of airborne noise from hydraulic fluid power systems and components.Method of determining sound power levels from valves controlling flow and pressure
BS 5944-5:1985. Measurement of airborne noise from hydraulic fluid power systems and components.Simplified method of determining sound power levels from pumps using an anechoic chamber
BS 5944-6:1992, ISO 4412-3:1991. Measurement of airborne noise from hydraulic fluid power systems and components.Method of test for pumps using a parallelepiped microphone array
BS 5945:1980, ISO 3457-1979. Specification for guards and shields for earth-moving machinery
BS 5946:1980. Method of test for determination of the punking behaviour of phenol-formaldehyde foam
BS 5947:1985, ISO 5700-1984. Method of test for static loading for protective cabs and frames for agricultural wheeled tractors, including acceptance conditions
BS 5947:1992, ISO 5700:1989. Method of test for static loading of protective cabs and frames for agricultural wheeled tractors, including acceptance conditions
BS 5948-1:1980, ISO 4814-1980. Household sewing machinesMethod for determination of the stability of needle thread tension
BS 5948-2:1981, ISO 4815-1980. Household sewing machinesMethod for determination of sewing capacity
BS 5948-3:1985, ISO 4818:1984. Household sewing machinesMethod for determination of creep of one ply of material over another
BS 5949:1980, ISO 4488-1979. Specification for asbestos-cement pipes and joints for thrust-boring and pipe jacking
BS 594987:2007. Asphalt for roads and other paved areas - Specification for transport, laying and compaction and type testing protocols.
BS 594987:2010. Asphalt for roads and other paved areas. Specification for transport, laying, compaction and type testing protocols
BS 5950-1:1985. Structural use of steelwork in buildingCode of practice for design in simple and continuous construction: hot rolled sections
BS 5950-1:1990. Structural use of steelwork in buildingCode of practice for design in simple and continuous construction: hot rolled sections
BS 5950-1:2000. Structural use of steelwork in buildingCode of practice for design. Rolled and welded sections
BS 5950-2:1985. Structural use of steelwork in buildingSpecification for materials, fabrication and erection: hot rolled sections
BS 5950-2:1992. Structural use of steelwork in buildingSpecification for materials, fabrication and erection: hot-rolled sections
BS 5950-2:2001. Structural use of steelwork in buildingSpecification for materials, fabrication and erection. Rolled and welded sections
BS 5950-3.1:1990+A1:2010. Structural use of steelwork in building Design in composite construction
BS 5950-4:1982. Structural use of steelwork in buildingCode of practice for design of floors with profiled steel sheeting
BS 5950-4:1994. Structural use of steelwork in buildingCode of practice for design of composite slabs with profiled steel sheeting
BS 5950-5:1987. Structural use of steelwork in buildingCode of practice for design of cold formed sections
BS 5950-5:1998. Structural use of steelwork in buildingCode of practice for design of cold formed thin gauge sections
BS 5950-6:1995. Structural use of steelwork in buildingCode of practice for design of light gauge profiled steel sheeting
BS 5950-7:1992. Structural use of steelwork in buildingSpecification for materials and workmanship: cold formed sections
BS 5950-8:1990. Structural use of steelwork in buildingCode of practice for fire resistant design
BS 5950-8:2003. Structural use of steelwork in buildingCode of practice for fire resistant design
BS 5950-9:1994. Structural use of steelwork in buildingCode of practice for stressed skin design
BS 5951:1982. Schedule of graphic symbols for machinery in the textile industry
BS 5952:1980, ISO 5816-1979. Specification for muscovite mica components for electronic equipment
BS 5953-1:1980, IEC 60606:1978. Guide on power transformersApplication of power transformers
BS 5954:1980, IEC 60297:1975. Specification for dimensions of panels and racks for electronic equipment
BS 5954-2:1985, IEC 60297-2:1982. Dimensions of mechanical structures of the 482.6 mm (19 in) series.Specification for cabinets and pitches of rack structures
BS 5954-3:1985, IEC 60297-3:1984. Dimensions of mechanical structures of the 482.6 mm (19 in) series.Specification for subracks and associated plug-in units
BS 5955-6:1980. Plastics pipework (thermoplastics materials)Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers
BS 5955-7:1983. Plastics pipework (thermoplastics materials)Recommendations for methods of thermal fusion jointing
BS 5955-8:1990. Plastics pipework (thermoplastics materials)Specification for the installation of thermoplastics pipes and associated fittings for use in domestic hot and cold water services and heating systems
BS 5955-8:2001. Plastics pipework (thermoplastics materials)Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
BS 5956:1980. Specification for A6-size microfiche for the motor industry
BS 5957:1980. Recommendations for modules for the coordinating dimensions of catering equipment using containers to BS 4874
BS 5958-1:1980. Code of practice for control of undesirable static electricity.General considerations
BS 5958-1:1991. Code of practice for control of undesirable static electricityGeneral considerations
BS 5958-2:1983. Code of practice for control of undesirable static electricity.Recommendations for particular industrial situations
BS 5958-2:1991. Code of practice for control of undesirable static electricityRecommendations for particular industrial situations
BS 5959:1980, ISO 4169-1979. Specification for key numbering system and layout charts for keyboards on office machines
BS 5960:1980, ISO 4232/1-1979. Specification for minimum information to be included in specification sheets of duplicators
BS 5961:1980, IEC 60648:1979. Method for determination of coefficients of friction of plastic film and sheeting for use as electrical insulation
BS 5962:1980. Specifications for naphthalene (including test methods)
BS 5963:1981. Specification for electrically operated automatic gas shut-off valves
BS 5964:1980, ISO 4463-1979. Methods for setting out and measurement of buildings: permissible measuring deviations
BS 5964-1:1990, ISO 4463-1:1989. Building setting out and measurementMethods of measuring, planning and organization and acceptance criteria
BS 5964-2:1996, ISO 4463-2:1995. Building setting out and measurementMeasuring stations and targets
BS 5964-3:1996, ISO 4463-3:1995. Building setting out and measurementCheck-lists for the procurement of surveys and measurement services
BS 5965:1980. Specification for manually driven balanced personal homelifts
BS 5966:1980, IEC 60645:1979. Specification for audiometers
BS 5967-1:1980, IEC 60654-1:1979. Operating conditions for industrial-process measurement and control equipment.Specification for temperature, humidity and barometric pressure
BS 5968:1980. Methods of acceptance testing of industrial type steam turbines
BS 5969:1981, IEC 60651:1979. Specification for sound level meters
BS 5970:1981. Code of practice for thermal insulation of pipework and equipment (in the temperature range -100°C to +870°C)
BS 5970:1992. Code of practice for thermal insulation of pipework and equipment (in the temperature range -100°C to +870°C)
BS 5970:2001. Code of practice for thermal insulation of pipework and equipment in the temperature range of -100°C to +870°C
BS 5970:2012. Thermal insulation of pipework, ductwork, associated equipment and other industrial installations in the temperature range of -100°C to +870°C. Code of practice
BS 5971:1988, EN 60432:1988. Specification for safety of tungsten filament lamps for domestic and similar general lighting purposes
BS 5971-1:1980. Safety and interchangeability of tungsten filament lamps for domestic and similar general lighting purposes.Specification for safety and interchangeability
BS 5971-2:1980. Safety and interchangeability of tungsten filament lamps for domestic and similar general lighting purposes.Method of assessment for safety and interchangeability
BS 5972:1980. Specification for photoelectric control units for road lighting
BS 5973:1981. Code of practice for access and working scaffolds and special scaffold structures in steel
BS 5973:1990. Code of practice for access and working scaffolds and special scaffold structures in steel
BS 5973:1993. Code of practice for access and working scaffolds and special scaffold structures in steel
BS 5974:1982. Code of practice for temporarily installed suspended scaffolds and access equipment
BS 5974:1990. Code of practice for temporarily installed suspended scaffolds and access equipment
BS 5974:2010. Code of practice for the planning, design, setting up and use of temporary suspended access equipment
BS 5975:1982. Code of practice for falsework
BS 5975:1996. Code of practice for falsework
BS 5975:2008+A1:2011. Code of practice for temporary works procedures and the permissible stress design of falsework
BS 5977-1:1981. LintelsMethod for assessment of load
BS 5977-2:1983. LintelsSpecification for prefabricated lintels
BS 5978-1:1983. Safety and performance of gas-fired hot water boilers (60kW to 2 MW input).Specification for general requirements
BS 5978-1:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input)Specification for general requirements
BS 5978-2:1983. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input).Specification for additional requirements for boilers with atmospheric burners
BS 5978-2:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input)Specification for additional requirements for boilers with atmospheric burners
BS 5978-3:1983. Safety and performance of gas-fired hot water boilers (60kW to 2 MW input).Specification for additional requirements for boilers with forced or induced draught burners
BS 5978-3:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input)Specification for additional requirements for boilers with forced or induced draught burners
BS 5979:1981. Specification for direct line signalling systems and for remote centres for intruder alarm systems
BS 5979:1987. Code of practice for remote centres for intruder alarm systems
BS 5979:1993. Code of practice for remote centres for alarm systems
BS 5979:2000. Code of practice for remote centres receiving signals from security systems
BS 5979:2007. Remote centres receiving signals from fire and security systems. Code of practice
BS 5980:1980. Specification for adhesives for use with ceramic tiles and mosaics
BS 598-1:1974. Specification for sampling and examination of bituminous mixtures for roads and other paved areas.Sampling
BS 598-1:2011. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for the measurement of the rate of spread of coated chippings and the temperature of bituminous mixtures using non-contact temperature-measuring devices and for the assessment of the compaction performance of a roller
BS 598-100:1987. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for sampling for analysis
BS 598-100:2004. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for sampling for analysis
BS 598-101:1987. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for preparatory treatments of samples for analysis
BS 598-101:2004. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for preparatory treatments of samples for analysis
BS 598-102:1989. Sampling and examination of bituminous mixtures for roads and other paved areasAnalytical test methods
BS 598-102:1996. Sampling and examination of bituminous mixtures for roads and other paved areasAnalytical test methods
BS 598-102:2003. Sampling and examination of bituminous mixtures for roads and other paved areasAnalytical test methods
BS 598-104:1989. Sampling and examination of bituminous mixtures for roads and other paved areasMethods of test for the determination of density and compaction
BS 598-104:2005. Sampling and examination of bituminous mixtures for roads and other paved areasMethods of test for the determination of density and compaction
BS 598-105:1990. Sampling and examination of bituminous mixtures for roads and other paved areasMethods of test for the determination of texture depth
BS 598-105:2000. Sampling and examination of bituminous mixtures for roads and other paved areasMethods of test for the determination of texture depth
BS 598-106:1990. Sampling and examination of bituminous mixtures for roads and other paved areasMethod for the determination of the stability index of pitch-bitumen binders
BS 598-107:1990. Sampling and examination of bituminous mixtures for roads and other paved areasMethod of test for the determination of the composition of design wearing course rolled asphalt
BS 598-107:2004. Sampling and examination of bituminous mixtures for roads and other paved areasMethod of test for the determination of the composition of design surface course rolled asphalt
BS 598-108:1990. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for determination of the condition of the binder on coated chippings and for measurement of the rate of spread of coated chippings
BS 598-108:2005. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for determination of the condition of the binder on coated chippings and for measurement of the rate of spread of coated chippings
BS 598-109:1990. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for the assessment of the compaction performance of a roller and recommended procedures for the measurement of the temperature of bituminous mixtures
BS 598-110:1996. Sampling and examination of bituminous mixtures for roads and other paved areasMethods of test for the determination of wheel-tracking rate
BS 598-110:1998. Sampling and examination of bituminous mixtures for roads and other paved areasMethods of test for the determination of wheel-tracking rate and depth
BS 598-111:1995. Sampling and examination of bituminous mixtures for roads and other paved areasMethod for determination of resistance to permanent deformation of bituminous mixtures subject to unconfined uniaxial loading
BS 598-112:2004. Sampling and examination of bituminous mixtures for roads and other paved areasMethod for the use of road surface hardness probe
BS 598-2:1974. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for analytical testing
BS 5982:1980, ISO 6014-1979. Method for determination of ground speed of earth-moving machinery
BS 5982:1987, ISO 6014-1986. Method for determination of ground speed of earth-moving machinery
BS 598-3:1985. Sampling and examination of bituminous mixtures for roads and other paved areasMethods for design and physical testing
BS 5983-1:1980, ISO 6124/1-1982. Metric spherical plain bearings.Specification for dimensions of spherical plain radial bearings, joint type, dimension series E and G
BS 5983-1:1989, ISO 6124-1:1987. Metric spherical plain bearingsSpecification for dimensions of spherical plain radial bearings, joint type, dimension series E and G
BS 5983-2:1982, ISO 6125-1982. Metric spherical plain bearingsSpecification for tolerances of spherical plain radial bearings, joint type
BS 5983-3:1982, ISO 6124/2-1982. Metric spherical plain bearingsSpecification for dimensions of spherical plain radial bearings, joint type, dimension series EW, bearings with extended inner ring
BS 5983-4:1982, ISO 6124/3-1982. Metric spherical plain bearingsSpecification for dimensions of spherical plain radial bearings, joint type, dimension series C
BS 5983-5:1982, ISO 6126:1982. Metric spherical plain bearingsSpecification for dimensions and tolerances of spherical plain bearing rod ends, dimension series E and JK
BS 5983-6:1983, ISO 6811-1983. Metric spherical plain bearingsGlossary of terms
BS 5984:1980, IEC 60666:1979. Method for detection and determination of specified anti-oxidant additives in insulating oils
BS 5985:1980. Specification for a template for services to dental unit bases or floor boxes
BS 5986:1980. Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW
BS 5987:1980, ISO 1839-1980. Methods for sampling tea
BS 5988:1980, ISO 582-1979. Specification for minimum and maximum chamfer dimensions of metric series rolling bearings
BS 5989-1:1980, ISO 104-1979. Rolling bearings: metric thrust bearingsSpecification for dimensions of thrust ball bearings with flat back faces
BS 5989-1:1995, ISO 104:1994. Rolling bearings: metric thrust bearingsSpecification for dimensions of thrust bearings
BS 5989-2:1980, ISO 199-1979. Rolling bearings: metric thrust bearingsSpecification for tolerances of thrust ball bearings
BS 599:1966. Methods of testing pumps
BS 5990:1981. Specification for direct gas fired forced convection air heaters for space heating (60 kW up to 2 MW input): safety and performance requirements (excluding electrical requirements) (2nd family gases)
BS 5990:1990. Specification for direct gas-fired forced convection air heaters with rated heat inputs up to 2 MW for industrial and commercial space heating: safety and performance requirements (excluding electrical requirement) (2nd family gases)
BS 5990:2006. Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases)
BS 5991:1983. Specification for indirect gas fired forced convection air heaters for space heating (60 kW up to 2 MW input): safety and performance requirements (excluding electrical requirements) (2nd family gases)
BS 5991:1989. Specification for indirect gas fired forced convection air heaters with rated heat inputs up to 2 MW for industrial and commercial space heating: safety and performance requirements (excluding electrical requirements (2nd family gases)
BS 5991:2006. Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases)
BS 5992-1:1980, IEC 60255-0-20:1974. Electrical relaysSpecification for contact performance of electrical relays
BS 5992-3:1980, IEC 60255-5:1977. Electrical relaysSpecification for the insulation testing of electrical relays
BS 5992-4:1983, IEC 60255-14:1981. Electrical relaysSpecification for contact loads of preferred values used in endurance tests for electrical relay contacts
BS 5992-5:1983, IEC 60255-15:1981. Electrical relays.Specification for test equipment used in endurance tests for electrical relay contacts
BS 5992-6:1984. Electrical relaysSpecification for the basic modules for the dimensions of general purpose all-or-nothing relays
BS 5993:1980. Specification for leather-covered cricket balls
BS 5993:1987. Specification for leather-covered cricket balls
BS 5993:1994. Specification for cricket balls
BS 5994:1980, EN 50027. Specification for industrial low voltage switchgear and controlgear. Terminal aperture sizes for unprepared round copper conductors
BS 5995:1980. Methods of test for electrohydraulic servovalves
BS 5996:1980. Methods for ultrasonic testing and specifying quality grades of ferritic steel plate
BS 5996:1993. Specification for acceptance levels for internal imperfections in steel plate, strip and wide flats, based on ultrasonic testing
BS 5997:1980. Guide to British Standard codes of practice for building services
BS 5998:1983. Specification for quality levels for steel valve castings
BS 5999:1980. Specification for serials holdings statements for libraries and documentation centres
BS 5F 100:1991. Procedure for inspection and testing of textiles for aerospace purposes
BS 5F 120:2002. Continuous filament nylon sewing threads for aerospace purposes
BS 5F 15:1960. Hemp line and rope for aeronautical purposes
BS 5F 32:1960. Hemp cord for aeronautical purposes
BS 5F 49:1991. Specification for shuttle woven cotton webbing for aerospace purposes
BS 5F 54:2002. Heavy duty linen (flax) sewing thread for aerospace purposes
BS 5F 58:2002. Cotton thread for aerospace purposes
BS 5F 59:2002. Braided linen (flax) cord for aerospace purposes
BS 5G 178-1:1993. Crimped joints for aircraft electrical cables and wires.Specification for design requirements (including tests) for components and tools
BS 5G 205-1:1990. Secondary batteries for aircraftSpecification for lead-acid batteries
BS 5L 100:2011. Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
BS 5L 101:2011. Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
BS 5L 34:1985. Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
BS 5L 36:1985. Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)
BS 5L 44:1985. Specification for forging stock, bars, extruded sections and forgings of aluminium-2¼% magnesium alloy
BS 5M 23:1987, ISO 12-1987. Specification for an identification scheme for pipelines
BS 5N 100-5:2006. Aircraft oxygen systems and equipmentGuide to fire and explosion hazards associated with oxygen, including handling, storage and replenishment
BS 5N 100-7:2002. Aircraft oxygen systems and equipmentGuide to cleaning labelling and packaging
BS 5S 100:1993. Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
BS 5S 15:1964. Specification for aircraft material. 3 per cent nickel case-hardening steel
BS 5S 21:1964. Specification for aircraft material. '20' carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension)
BS 5S 80:1976. Specification for high chromium-nickel corrosion-resisting steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 100 mm)
BS 5S 82:1976. Specification. 4% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1320-1520 MPa)
BS 5S 99:1994. Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa: limiting ruling section 150 mm)
BS 5SP 4:1944. Specification for aircraft material. Steel pins
BS 5T 100:2010. Aerospace series. Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
BS 5V 7:1952. Specification for mahogany for use in airscrews
BS 5X 17:1998. Specification for oleoresinous varnish for aerospace purposes
BS 600:1935. The application of statistical methods to industrial standardization and quality control
BS 600:2000. A guide to the application of statistical methods to quality and standardization
BS 6000:1972. Guide to the use of BS 6001, sampling procedures and tables for inspection by attributes
BS 6000:1996, ISO TR 8550:1994. Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
BS 6000-1:2005. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lotsGeneral guide to acceptance sampling
BS 6000-2:2005. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lotsGuide to sampling by attributes
BS 6000-3:2005. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lotsGuide to sampling by variables
BS 6001-0:1996, ISO 2859-0:1995. Sampling procedures for inspection by attributesIntroduction to the BS 6001 attribute sampling system
BS 6001-0:2006, ISO 2859-10:2006. Sampling procedures for inspection by attributesIntroduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes
BS 6001-1:1972. Sampling procedures for inspection by attributes.Specification for sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
BS 6001-1:1991, ISO 2859-1:1989. Sampling procedures for inspection by attributesSpecification for sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
BS 6001-1:1999+A1:2011, ISO 2859-1:1999. Sampling procedures for inspection by attributesSampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS 6001-2:1984. Sampling procedures for inspection by attributes.Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection
BS 6001-2:1993, ISO 2859-2:1985. Sampling procedures for inspection by attributesSpecification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection
BS 6001-3:1986. Sampling procedures for inspection by attributes.Specification for skip-lot procedures
BS 6001-3:1993, ISO 2859-3:1991. Sampling procedures for inspection by attributesSpecification for skip-lot procedures
BS 6001-3:2005. Sampling procedures for inspection by attributesSpecification for skip-lot sampling procedures
BS 6001-4:1994, ISO 8422:1991. Sampling procedures for inspection by attributes.Specification for sequential sampling plans
BS 6001-4:2005, ISO 2859-5:2005. Sampling procedures for inspection by attributesSystem of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS 6001-5:2000, ISO 2859-4:1999. Sampling procedures for inspection by attributesProcedures for assessment of stated quality levels
BS 6001-5:2002. Sampling procedures for inspection by attributesProcedures for assessment of declared quality levels
BS 6001-7:2001. Sampling procedures for inspection by attributesCredit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection
BS 6001-7:2006, ISO 18414:2006. Acceptance sampling procedures for inspection by attributesAccept-zero sampling system based on credit principle for controlling outgoing quality
BS 6001-9:2002. Sampling procedures for inspection by attributesDouble sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
BS 6002:1979. Specification for sampling procedures and charts for inspection by variables for percent defective
BS 6002-1:1993, ISO 3951:1989. Sampling procedures for inspection by variablesSpecification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
BS 6002-1:2007. Sampling procedures for inspection by variablesGuide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS 6002-2:2007. Sampling procedures for inspection by variablesGeneral guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS 6002-3:2005. Sampling procedures for inspection by variablesGuide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS 6002-4.1:1994, ISO 8423:1991. Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming.Known standard deviation
BS 6002-4:2006, ISO 3951-5:2006. Sampling procedures for inspection by variablesSequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
BS 6003:1980, ISO 4057-1979. Specification for data interchange on 6.30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1600 bpi) phase-encoded
BS 6004:1984. Specification for PVC-insulated cables (non-armoured) for electric power and lighting
BS 6004:1990. Specification for PVC-insulated cables (non-armoured) for electric power and lighting
BS 6004:1991. Specification for PVC-insulated cables (non-armoured) for electric power and lighting
BS 6004:1995. Specification for PVC-insulated cables (non-armoured) for electric power and lighting
BS 6004:2000. Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring
BS 6004:2012. Electric cables. PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting
BS 6005:1981. Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators
BS 6005:1993. Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators
BS 6005:1997. Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators
BS 6006:1980, ISO 4873-1979. Specification for United Kingdom 8-bit data code
BS 6006:1987, ISO 4873-1986. Specification for structure and rules for implementation of United Kingdom 8-bit coded character set
BS 6007:1983. Specification for rubber-insulated cables for electric power and lighting
BS 6007:1991. Specification for rubber-insulated cables for electric power and lighting
BS 6007:1993. Specification for rubber-insulated cables for electric power and lighting
BS 6007:2000. Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
BS 6007:2006. Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
BS 6008:1980, ISO 3103-1980. Method for preparation of a liquor of tea for use in sensory tests
BS 6009:1982, EN 113:1980. Wood preservatives. Determination of the toxic values against wood destroying Basidiomycetes cultured on an agar medium
BS 6010-1:1980, ISO 2264-1972. Rolling bearings - bearings with spherical outside surface and extended inner ring width.Specification for characteristics, dimensions and bore tolerances
BS 6010-2:1980, ISO 3145-1974. Rolling bearings - bearings with spherical outside surface and extended inner ring width.Specification for dimensions and tolerances of eccentric locking collars
BS 6010-3:1980, ISO 3228-1977. Rolling bearings - bearings with spherical outside surface and extended inner ring width.Specification for dimensions of cast and pressed housings
BS 6010-3:1994, ISO 3228:1993. Rolling bearings. Bearings with speherical outside surface and extended inner ring width.Specification for dimensions of cast and pressed housings
BS 6010-4:1993, ISO 9628:1992. Rolling bearings. Bearings with spherical outside surface and extended inner ring widthSpecification for insert bearings and eccentric locking collars
BS 601-1:1973. Specification for steel sheet and strip for magnetic circuits of electrical apparatus.Non-oriented steel, 0.25 mm thick and above
BS 601-2:1973. Specification for steel sheet and strip for magnetic circuits of electrical apparatus.Oriented steel, 0.25 mm thick and above
BS 6012:1980. Specification for heat test source (H.T.S.) lamps for carrying out heating tests on luminaires
BS 601-3:1973. Specification for steel sheet and strip for magnetic circuits of electrical apparatus.High permeability steel with mechanical properties
BS 6013:1980, IEC 60447:1974. Specification for standard directions of movement for actuators which control the operation of electrical apparatus
BS 601-4:1973. Specification for steel sheet and strip for magnetic circuits of electrical apparatus.Thin magnetic steel, less than 0.25 mm thick
BS 6014:1980. Specification for ethylene propylene rubber compounds
BS 6014:1991. Specification for ethylene propylene rubber compounds
BS 6014:2003. Ethylene propylene rubber compounds. Specification
BS 601-5:1973. Specification for steel sheet and strip for magnetic circuits of electrical apparatus.Methods of test
BS 6015:1980, ISO 4135-1979. Glossary of terms used in anaesthesiology
BS 6016:1980. Specification for filtering facepiece dust respirators
BS 6017:1981. Specification for copper refinery shapes
BS 6018:1981. Method of test for accuracy and precision of mechanical handpipettes down to 0.05 ml capacity
BS 6018:1991. Method of test for accuracy and precision of mechanical handpipettes of capacity 0.05 mL and above
BS 6019:1980, ISO 6240-1980. Recommendations for performance standards in building. Contents and presentation
BS 602; 1085:1970. Specifications for lead and lead alloy pipes for other than chemical purposes
BS 6020-1:1981. Instruments for the detection of combustible gases.Specification for general requirements and test methods
BS 6020-2:1981. Instruments for the detection of combustible gases.Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
BS 6020-3:1982. Instruments for the detection of combustible gases.Specification for safety and performance requirements for Group I instruments reading up to 100% methane
BS 6020-4:1981. Instruments for the detection of combustible gases.Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
BS 6020-5:1982. Instruments for the detection of combustible gases.Specification for performance requirements for Group II instruments reading up to 100% gas
BS 6022:1983, ISO 6704-1982. Classification of automatic steam traps
BS 6024:1981, ISO 6553-1980. Specification for marking of automatic steam traps
BS 6025:1982, ISO 6948-1981. Specification for production and performance characteristic tests for automatic steam traps
BS 6026:1981, ISO 6554-1980. Specification for face-to-face dimensions of flanged automatic steam traps
BS 6027:1990, ISO 7841:1988. Methods for determination of steam loss of automatic steam traps
BS 6028:1990, ISO 7842:1988. Methods for determination of discharge capacity of automatic steam traps
BS 6031:1981. Code of practice for earthworks
BS 6031:2009. Code of practice for earthworks
BS 6033:1981, ISO 4877-1980. Specification for colour code for identification of the constituent material of ropes and cordage
BS 6034:1981, ISO 7001-1980. Specification for public information symbols
BS 6034:1981:Addendum No. 1:1986, ISO 7001-1980/Addendum 1-1985. Spécification des symboles destinés à l'information du public
BS 6034:1990, ISO 7001:1990. Specification for public information symbols
BS 6035-1:1981, ISO 5267/1-1979. Methods for determination of the drainability of pulpSchopper-Riegler method
BS 6035-2:1982, ISO 5267-2:1980. Methods for determination of the drainability of pulp'Canadian Standard' freeness method
BS 6036:1985. Method for determination of the edgewise crush resistance of corrugated fibreboard
BS 6037:1981. Code of practice for permanently installed suspended access equipment
BS 6037:1990. Code of practice for permanently installed suspended access equipment
BS 6037-1:2003. Code of practice for the planning, design, installation and use of permanently installed access equipmentSuspended access equipment
BS 6037-2:2004. Code of practice for the planning, design, installation and use of permanently installed access equipmentTravelling ladders and gantries
BS 6038:1980, IEC 60526:1978. Specification for high-voltage cable plug and socket connections for medical X-ray equipment
BS 6039:1981. Specification for dental glass ionomer cements
BS 604:1982, ISO 4788:1980. Specification for graduated glass measuring cylinders
BS 6040:1981, ISO 1891:1979. Nomenclature for bolts, screws, nuts and accessories
BS 6041:1981, ISO 4519-1980. Method of sampling of electrodeposited metallic coatings and related finishes: procedures for inspection by attributes
BS 6042:1981. Specification for dental semi-precious metal casting alloys
BS 6042:1990, EN 28891:1991,ISO 8891:1990. Specification for dental semi-precious metal casting alloys
BS 6043-1.1:1981. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchSampling
BS 6043-1.1:2002, ISO 6257:2002. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchSampling
BS 6043-1.10:1994. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of volatile matter content
BS 6043-1.10:2000, ISO 12977:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of volatile matter content
BS 6043-1.11:1994. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of the atomic C/H ratio of the quinoline-insoluble material
BS 6043-1.11:2000, ISO 12979:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture
BS 6043-1.12:1994. Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch.Determination of mesophase content
BS 6043-1.13:1994. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of sulfur content (routine method)
BS 6043-1.13:2000, ISO 10238:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrode pitch
BS 6043-1.2:1981, ISO 5939:1980. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of water content (Dean and Stark method)
BS 6043-1.3:1983, ISO 5940-1981. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of softening point (ring and ball method)
BS 6043-1.4:1981, ISO 6376-1980. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of content of toluene-insoluble material
BS 6043-1.5:1983, ISO 6791-1981. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of content of quinoline-insoluble material
BS 6043-1.6:1998, ISO 6998:1997. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of coking value
BS 6043-1.7:1988. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of apparent density (buoyancy method)
BS 6043-1.8:1986, ISO 8006-1985. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of ash
BS 6043-1.9:1989, ISO 9055:1988. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of sulphur content (bomb method)
BS 6043-1-1.6:1984, ISO 6998-1984. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitchDetermination of coking value
BS 6043-2.1:1985, ISO 6375-1980. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeSampling
BS 6043-2.10:1996, ISO 10143:1995. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of electrical resistivity of calcined coke granules
BS 6043-2.11:1995, ISO 9406:1995. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of volatile matter content
BS 6043-2.12:1994. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke.Determination of particle size distribution of fine coke
BS 6043-2.13:1996, ISO 10236:1995. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of tapped bulk density of green and calcined coke
BS 6043-2.15:1997, ISO 10142:1996. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of grain stability of calcined coke using a laboratory vibration mill
BS 6043-2.16:1998, ISO 11412:1998. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of water content of calcined coke
BS 6043-2.2:1985, ISO 8005-1984. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of ash content of green and calcined cokes
BS 6043-2.20.1:2001, ISO 12981-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Carboxy reactivity of calcined cokeDetermination of the reactivity by a loss in mass method
BS 6043-2.21.1:2001, ISO 12982-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Air reactivity of calcined cokeDetermination of the reactivity by determination of ignition temperature
BS 6043-2.3:1997, ISO 8658:1997. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of trace elements in green and calcined coke by flame atomic absorption spectroscopy
BS 6043-2.4:2000, ISO 12980:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrode coke
BS 6043-2.6:1986, ISO 8004-1985. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of the density in xylene of calcined cokes
BS 6043-2.7:1986, ISO 6997-1985. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of the apparent oil content of calcined cokes (gravimetric method)
BS 6043-2.8:1987, ISO 8723-1986. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of oil content by solvent extraction of calcined coke
BS 6043-2.9:2000, ISO 12984:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrode coke
BS 6043-2-18:2001, ISO 5931:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrode coke
BS 6043-2-2.11:1989, ISO 9406:1988. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of volatile matter content
BS 6043-2-2.3:1989. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode cokeDetermination of trace elements by flame atomic absorption spectrometry
BS 6043-3.1.1:1999, ISO 8007-1:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrodes
BS 6043-3.1.2:1999, ISO 8007-2:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrodes
BS 6043-3.2:1997, ISO 9088:1997. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. ElectrodesDetermination of density of cathode blocks and prebaked anodes
BS 6043-3.3:2000, ISO 12985-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrodes
BS 6043-3.4:2000, ISO 12985-2:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrodes
BS 6043-3.5.1:2000, ISO 12986-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrodes
BS 6043-3.6:2000, ISO 11713:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrodes
BS 6043-3.8.1:2001, ISO 12988-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrodes
BS 6043-3.9.1:2002, ISO 12989-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufactureElectrodes
BS 6043-4.0:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesGeneral introduction
BS 6043-4.1:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesMethods of sampling
BS 6043-4.1:2000, ISO 14422:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufactureCold ramming pastes
BS 6043-4.10:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of the apparent porosity of baked rammed paste
BS 6043-4.11:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of the thermal expansion of baked rammed paste
BS 6043-4.12:1992. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of the thermal conductivity of baked rammed paste
BS 6043-4.13:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of ash of baked rammed paste
BS 6043-4.2:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution
BS 6043-4.2:2000, ISO/TS 14423:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution
BS 6043-4.3:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of aggregate size distribution after extraction by dichloromethane
BS 6043-4.4:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of volatile matter content of unbaked paste
BS 6043-4.4:2000, ISO/TS 14425:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of the volatile matter content of unbaked paste
BS 6043-4.5:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of water content of unbaked pastes
BS 6043-4.6:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of maximum rammed apparent density of unbaked paste
BS 6043-4.7:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesPreparation of baked rammed test pieces and determination of baked apparent density, change in volume and loss in mass
BS 6043-4.8:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of electrical resistivity of baked rammed paste
BS 6043-4.9:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastesDetermination of the cold crushing strength of baked rammed paste
BS 6044:1981. Specification for pavement marking paints
BS 6044:1987. Specification for pavement marking paints
BS 6045-1:1981, IEC 60672-1:1980. Ceramic and glass electrical insulating materialsDefinitions and classification
BS 6046-1:1984. Use of network techniques in project managementGuide to the use of management, planning, review and reporting procedures
BS 6046-2:1981. Use of network techniques in project management.Guide to the use of graphical and estimating techniques
BS 6046-2:1992. Use of network techniques in project managementGuide to the use of graphical and project estimating techniques
BS 6046-3:1981. Use of network techniques in project management.Guide to the use of computers
BS 6046-3:1992. Use of network techniques in project managementGuide to the use of computers
BS 6046-4:1981. Use of network techniques in project management.Guide to resource analysis and cost control
BS 6046-4:1992. Use of network techniques in project managementGuide to resource analysis and cost control
BS 6047-1:1981. Flame supervision devices for domestic, commercial and catering gas appliancesSpecification for heat sensitive type
BS 6048:1981, ISO 3720-1977. Specification for black tea
BS 6048:1987, ISO 3720:1986. Specification for black tea
BS 6049-1:1981, ISO 1572-1980. Methods of test for teaPreparation of ground sample of known dry matter content
BS 6049-2:1981, ISO 1573-1980. Methods of test for teaDetermination of loss in mass at 103°C
BS 6049-3:1990, ISO 9768:1990. Method of test for tea.Determination of water extract
BS 6049-3:1994, ISO 9768:1994. Methods of test for teaDetermination of water extract
BS 6049-4:1981, ISO 1575-1980. Methods of test for tea.Determination of total ash
BS 6049-4:1988, ISO 1575:1987. Methods of test for teaDetermination of total ash
BS 6049-5:1981, ISO 1576-1975. Methods of test for tea.Determination of water-soluble and water-insoluble ash
BS 6049-5:1989, ISO 1576:1988. Methods of test for teaDetermination of water-soluble ash and water-insoluble ash
BS 6049-6:1981, ISO 1577-1980. Methods of test for tea.Determination of acid-insoluble ash
BS 6049-6:1988, ISO 1577:1987. Methods of test for teaDetermination of acid-insoluble ash
BS 6049-7:1981, ISO 1578-1975. Methods of test for tea.Determination of alkalinity of water-soluble ash
BS 6049-8:1998, ISO 11286:1997. Methods of test for teaClassification of grades by particle size analysis
BS 6049-9:1999, ISO 15598:1999. Methods of test for teaDetermination of crude fibre content
BS 6050:1981, ISO 4232/2-1980. Specification for minimum information to be included in specification sheets of document copying machines
BS 6053:1981. Specification for outside diameters of conduits for electrical installations and threads for conduits and fittings
BS 6054-1:1981, ISO 6196/1-1980. Glossary of terms for micrographics.General terms
BS 6054-2:1983. Glossary of terms for micrographics.Image positions and methods of recording
BS 6054-3:1984, ISO 6196/3-1983. Glossary of terms for micrographicsFilm processing
BS 6054-4:1987, ISO 6196/4-1987. Glossary of terms for micrographicsMaterials and packaging
BS 6055:1981, ISO 5008-1979. Methods for measurement of whole-body vibration of the operators of agricultrual wheeled tractors and machinery
BS 6056:1981. Method of measurement of transformer and reactor sound levels
BS 6057-0:1981. Rubber laticesGeneral introduction
BS 6057-1.1:1998, ISO 2004:1997. Rubber latices. Specification and codingSpecification for centrifuged or creamed, ammonia-preserved natural rubber latices
BS 6057-1.2:1990, ISO 2027:1990. Rubber latices. Specification and codingSpecification for evaporated, preserved natural rubber latices
BS 6057-1.3:1982, ISO 2438-1981. Rubber latices. Specification and codingCoding for synthetic rubber latices
BS 6057-1-1.1:1981, ISO 2004-1979. Rubber latices. Specifications and coding.Specification for centrifuged or creamed, ammonia-preserved natural rubber latices
BS 6057-1-1.1:1989, ISO 2004:1988. Rubber latices. Specification and codingSpecification for centrifuged or creamed, ammonia-preserved natural rubber latices
BS 6057-1-1.2:1981, ISO 2027-1978. Rubber latices. Specifications and coding.Specification for evaporated, preserved natural rubber latices
BS 6057-2:1987, ISO 123-1985. Rubber laticesSampling
BS 6057-3.1:1996, ISO 35:1995. Rubber latices. Methods of testDetermination of mechanical stability of natural rubber latex concentrate
BS 6057-3.10:1996, ISO 1409:1995. Rubber latices. Methods of testDetermination of surface tension
BS 6057-3.11:1987. Rubber latices. Methods of testDetermination of viscosity of rubber latices
BS 6057-3.12:1992, ISO 1802:1992. Rubber latices. Methods of testDetermination of boric acid content of natural rubber latex concentrate
BS 6057-3.13:1993, ISO 2005:1992. Rubber latices. Methods of testDetermination of sludge content
BS 6057-3.14:1987, ISO 2006-1985. Rubber latices. Methods of testDetermination of high-speed mechanical stability of synthetic rubber latices
BS 6057-3.15:1989, ISO 2008:1987. Rubber latices. Methods of testDetermination of volatile unsaturates content of styrene-butadiene rubber latices
BS 6057-3.16:1990, ISO 2028:1989. Rubber latices. Methods of testPreparation of dry polymer from synthetic latices
BS 6057-3.17:1990, ISO 3136:1983. Rubber latices. Methods of testDetermination of bound styrene content of non-reinforced styrene butadiene rubber latices
BS 6057-3.19:1986, ISO 4655-1985. Rubber latices. Methods of testDetermination of total bound styrene content of reinforced styrene-butadiene rubber latices
BS 6057-3.2:1997, ISO 124:1997. Rubber latices. Methods of testDetermination of total solids content of rubber latices
BS 6057-3.21:1996, ISO 3900:1995. Rubber latices. Methods of testDetermination of bound acrylonitrile content in nitrile latex
BS 6057-3.22:1990, ISO 3899:1988. Rubber latices. Methods of testDetermination of residual acrylonitrile content in nitrile latex
BS 6057-3.23:1990, ISO 9252:1989. Rubber latices. Methods of testMicrobiological examination of synthetic rubber latex
BS 6057-3.24:1992, ISO 498:1992. Rubber latices. Methods of testPreparation of dry films from natural rubber latex concentrate
BS 6057-3.25:1997, ISO 13773:1997. Rubber latices. Methods of testDetermination of alkalinity for polychloroprene latex
BS 6057-3.3:1990, ISO 125:1990. Rubber latices. Methods of testDetermination of alkalinity of natural rubber latex concentrate
BS 6057-3.4:1996, ISO 126:1995. Rubber latices. Methods of testDetermination of dry rubber content of natural rubber latices
BS 6057-3.5:1996, ISO 127:1995. Rubber latices. Methods of testDetermination of KOH number of natural rubber latices
BS 6057-3.6:1993, ISO 506:1992. Rubber latices. Methods of testDetermination of volatile fatty acid number of natural rubber latices
BS 6057-3.7:1995, ISO 705:1994. Rubber latices. Methods of testDetermination of density of natural rubber latices
BS 6057-3.8:1987, ISO 706-1985. Rubber latices. Methods of testDetermination of coagulum content (sieve residue)
BS 6057-3.9:1996, ISO 976:1996. Rubber latices. Methods of testDetermination of pH
BS 6057-3-3.1:1990, ISO 35:1989. Rubber latices. Methods of testDetermination of mechanical stability of natural rubber latex concentrate
BS 6057-3-3.10:1987, ISO 1409-1983. Rubber latices. Methods of testDetermination of surface tension
BS 6057-3-3.11:1984, ISO 1652-1974. Rubber latices. Methods of test.Determination of viscosity of rubber latices.
BS 6057-3-3.12:1984, ISO 1802-1974. Rubber latices. Methods of test.Determination of boric acid content of natural rubber latices
BS 6057-3-3.12:1988, ISO 1802-1985. Rubber latices. Methods of test.Determination of boric acid content of natural rubber latex concentrate
BS 6057-3-3.13:1984, ISO 2005-1974. Rubber latices. Methods of test.Determination of sludge content of natural rubber latices
BS 6057-3-3.13:1987, ISO 2005-1985. Rubber latices. Methods of test.Determination of sludge content
BS 6057-3-3.14:1984, ISO 2006-1974. Rubber latices. Methods of test.Determination of high-speed mechanical stability of synthetic rubber latices
BS 6057-3-3.15:1984, ISO 2008-1980. Rubber latices. Methods of test.Determination of volatile unsaturates content of styrene-butadiene rubber latices
BS 6057-3-3.2:1981, ISO 124-1974. Rubber latices. Methods of test.Determination of total solids content of rubber latices
BS 6057-3-3.2:1987, ISO 124-1985. Rubber latices. Methods of test.Determination of total solids content
BS 6057-3-3.2:1992, ISO 124:1992. Rubber latices. Methods of testDetermination of total solids content of rubber latices
BS 6057-3-3.3:1985, ISO 125-1983. Rubber latices. Methods of test.Determination of alkalinity of natural rubber latices
BS 6057-3-3.4:1990, ISO 126:1989. Rubber latices. Methods of testDetermination of dry rubber content of natural rubber latices
BS 6057-3-3.5:1985, ISO 127-1984. Rubber latices. Methods of testDetermination of KOH number of natural rubber latices
BS 6057-3-3.6:1982, ISO 506-1974. Rubber latices. Methods of test.Determination of volatile fatty acid number of natural rubber latices
BS 6057-3-3.6:1987, ISO 506-1985. Rubber latices. Methods of test.Determination of volatile fatty acid number
BS 6057-3-3.7:1982, ISO 705-1974. Rubber latices. Methods of testDetermination of density of natural rubber latices
BS 6057-3-3.8:1981, ISO 706-1976. Rubber latices. Methods of test.Determination of coagulum content of rubber latices
BS 6057-3-3.9:1981, ISO 976-1977. Rubber latices. Methods of test.Determination of pH of rubber latices
BS 6057-3-3.9:1990, ISO 976:1986. Rubber laticesDetermination of pH
BS 6058:1981, IEC 60613:1978. Method of specifying and verifying the characteristics of rotating anode X-ray tubes and X-ray tube assemblies used in medical diagnosis
BS 6058:1989, EN 60613:1990,IEC 60613:1989. Method of specifying and verifying the characteristics of rotating anode X-ray tubes and X-ray tube assemblies used in medical diagnosis
BS 6059:1981, IEC 60637:1979. Specification for essential data to be supplied with X-ray tubes and X-ray tube assemblies for medical use
BS 6060:1981, ISO 6392-1980. Specification for nipple-type lubrication fittings for earth-moving machinery
BS 6061:1981. Specification for transportable acetylene containers
BS 6062-1:1981, IEC 60286-1:1980. Packaging of electronic components for automatic handlingSpecification for tape packaging of components with axial leads on continuous tapes
BS 6062-2:1988, IEC 60286-2:1985. Packaging of electronic components for automatic handlingSpecification for tape packaging of components with unidirectional leads on continuous tapes
BS 6062-3:1988, IEC 60286-3:1986. Packaging of electronic components for automatic handling.Specification for packaging of leadless components on continuous tapes
BS 6062-3:1993, IEC 60286-3:1991. Packaging of electronic components for automatic handlingSpecification for packaging of leadless components on continuous tapes
BS 6063:1981, ISO 4097:1980. Methods of test for non-oil extended raw general purpose ethylene-propylene-diene rubbers (EPDM)
BS 6063:1992, ISO 4097:1991. Method for evaluation of general purpose ethylene-propylene-diene rubber (EPDM)
BS 6064:1981, ISO 4658-1980. Methods of test for raw acrylonitrile-butadiene (NBR) rubber
BS 6064:1992, ISO 4658:1990. Method for evaluation of acrylonitrile-butadiene rubber (NBR)
BS 6065:1981, ISO 5022-1979. Methods for sampling and acceptance testing of shaped refractory products
BS 6066:1981, ISO 5774-1980. Specification for thermoplastics hoses for compressed air
BS 6067:1981. Specification for multifunctional gas controls for domestic, commercial and catering appliances
BS 6068-0:1988. Water qualityIntroduction
BS 6068-0:1995. Water qualityIntroduction
BS 6068-1.1:1996, ISO 6107-1:1996. Water quality. GlossaryTerms relating to types of water, and treatment and storage of waste water
BS 6068-1.2:1997, ISO 6107-2:1997. Water quality. GlossaryAdditional terms relating to types of water, and treatment and storage of water and waste water, and terms used in sampling and analysis of water
BS 6068-1.4:1993, ISO 6107-4:1993. Water quality. GlossaryAn additional 18 terms
BS 6068-1.5:1996, ISO 6107-5:1996. Water quality. GlossaryAn additional 49 terms
BS 6068-1.6:1996, ISO 6107-6:1996. Water quality. GlossaryAn additional 41 terms
BS 6068-1.7:1997, ISO 6107-7:1997. Water quality. GlossaryAn additional 51 terms
BS 6068-1.9:1998, ISO 6107-9:1997. Water quality. GlossaryAlphabetical list and subject index
BS 6068-1-1.1:1982, ISO 6107-1:1980. Water quality. Glossary.Terms relating to types of water, and treatment and storage of waste water
BS 6068-1-1.1:1987, ISO 6107-1:1986. Water quality. GlossaryTerms relating to types of water, and treatment and storage of waste water
BS 6068-1-1.2:1982, ISO 6107-2:1981. Water quality. Glossary.Additional terms relating to types of water, and treatment and storage of water and waste water, and terms used in sampling and analysis of water
BS 6068-1-1.2:1990, ISO 6107-2:1989. Water quality. GlossaryAdditional terms relating to types of water, and treatment and storage of water and waste water, and terms used in sampling and analysis of water
BS 6068-1-1.3:1987. Water quality. Glossary.An additional 91 terms
BS 6068-1-1.4:1986, ISO 6107/4-1984. Water quality. Glossary.An additional 19 terms
BS 6068-1-1.5:1987, ISO 6107/5-1986. Water quality. GlossaryAn additional 49 terms
BS 6068-1-1.6:1987, ISO 6107/6-1986. Water quality. GlossaryAn additional 42 terms
BS 6068-1-1.7:1991, ISO 6107-7:1990. Water quality. GlossaryAn additional 47 terms
BS 6068-2.10:1984, ISO 6778-1984. Water quality. Physical, chemical and biochemical methodsDetermination of ammonium: potentiometric method
BS 6068-2.11:1984, ISO 7150-1:1984. Water quality. Physical, chemical and biochemical methodsDetermination of ammonium: manual spectrometric method
BS 6068-2.12:1990, ISO 6439:1990. Water quality. Physical, chemical and biochemical methodsDetermination of phenol index: 4-aminoantipyrine (4-aminophenazone) spectrometric methods after distillation
BS 6068-2.17:1986. Water quality. Physical, chemical and biochemical methodsMethods for determination of total cyanide
BS 6068-2.18:1986. Water quality. Physical, chemical and biochemical methodsMethods for the determination of easily liberatable cyanide
BS 6068-2.19:1986, ISO 6703-3:1984. Water quality. Physical, chemical and biochemical methodsMethod for determination of cyanogen chloride
BS 6068-2.2:1983, ISO 6332-1982. Water quality. Physical, chemical and biochemical methodsDetermination of iron: 1,10-phenanthroline photometric method
BS 6068-2.20:1986, ISO 6703-4:1985. Water quality. Physical, chemical and biochemical methodsMethod for determination of cyanide by diffusion at pH 6
BS 6068-2.24:1986, ISO 7875-2:1984. Water quality. Physical, chemical and biochemical methodsMethod for the determination of non-ionic surfactants using Dragendorff reagent
BS 6068-2.29:1987, ISO 8288-1986. Water quality. Physical, chemical and biochemical methodsDetermination of cobalt, nickel, copper, zinc, cadmium and lead: flame atomic absorption spectrometric methods
BS 6068-2.31:1987, ISO 6333-1986. Water quality. Physical, chemical and biochemical methodsMethod for determination of manganese: formaldoxime spectrometric method
BS 6068-2.33:1987, ISO 7150-2:1986. Water quality. Physical, chemical and biochemical methodsMethod for the determination of ammonium: automated spectrometric method
BS 6068-2.34:1988. Water quality. Physical, chemical and biochemical methodsMethod for the determination of the chemical oxygen demand
BS 6068-2.36:1989, ISO 7890-3:1988. Water quality. Physical, chemical and biochemical methodsSpectrometric method for the determination of nitrate using sulphosalicylic acid
BS 6068-2.37:1990, ISO 9297:1989. Water quality. Physical, chemical and biochemical methodsMethod for the determination of chloride via a silver nitrate titration with chromate indicator (Mohr's method)
BS 6068-2.39:1991. Water quality. Physical, chemical and biochemical methodsMethod for the determination of sulphate using barium chloride and gravimetry
BS 6068-2.40:1991, ISO 9390:1990. Water quality. Physical, chemical and biochemical methodsMethod for the determination of borate by spectrometry using azomethine-H
BS 6068-2.41:1993, ISO 10359-1:1992. Water quality. Physical, chemical and biochemical methodsDetermination of fluoride: electrochemical probe method for potable and lightly polluted water
BS 6068-2.42:1993, ISO 9964-1:1993. Water quality. Physical, chemical and biochemical methodsDetermination of sodium and potassium: determination of sodium by atomic absorption spectrometry
BS 6068-2.43:1993, ISO 9964-2:1993. Water quality. Physical, chemical and biochemical methodsDetermination of sodium and potassium: determination of potassium by atomic absorption spectrometry
BS 6068-2.44:1993, ISO 9964-3:1993. Water quality. Physical, chemical and biochemical methodsDetermination of sodium and potassium: determination of sodium and potassium by flame emission spectrometry
BS 6068-2.45:1993, ISO 9965:1993. Water quality. Physical, chemical and biochemical methodsDetermination of selenium by atomic absorption spectrometry
BS 6068-2.47:1995, ISO 11083:1994. Water quality. Physical, chemical and biochemical methodsDetermination of chromium (VI). Spectrometric method using 1,5-diphenylcarbazide
BS 6068-2.48:1995, ISO 10359-2:1994. Water quality. Physical, chemical and biochemical methodsDetermination of inorganically bound total fluoride after digestion and distillation
BS 6068-2.49:1995, ISO 10566:1994. Water quality. Physical, chemical and biochemical methodsDetermination of aluminium. Spectrometric method using pyrocatechol violet
BS 6068-2.50:1995, ISO 10523:1994. Water quality. Physical, chemical and biochemical methodsDetermination of pH
BS 6068-2.69:2000, ISO 15089:2000. Water quality. Physical, chemical and biochemical methodsGuidelines for selective immunoassays for the determination of plant treatment and pesticide agents
BS 6068-2.7:1984, ISO 5664-1984. Water quality. Physical, chemical and biochemical methodsDetermination of ammonium: distillation and titration method
BS 6068-2.8:1984, ISO 6058:1984. Water quality. Physical, chemical and biochemical methodsDetermination of calcium content: EDTA titrimetric method
BS 6068-2.9:1984, ISO 6059-1984. Water quality. Physical, chemical and biochemical methodsDetermination of the sum of calcium and magnesium: EDTA titrimetric method
BS 6068-2-2.12:1984, ISO 6439-1984. Water quality. Physical, chemical and biochemical methods.Determination of phenol index: 4-aminoantipyrine (4-aminophenazone) spectrometric methods after distillation
BS 6068-2-2.13:1984, ISO 7027-1984. Water quality. Physical, chemical and biochemical methodsDetermination of turbidity
BS 6068-2-2.15:1986. Water quality. Physical, chemical and biochemical methods.Determination of dissolved oxygen: electrochemical probe method
BS 6068-2-2.21:1985, ISO 5961-1985. Water quality. Physical, chemical and biochemical methodsDetermination of cadmium: flame atomic absorption spectrometric methods
BS 6068-2-2.22:1986, ISO 7887-1985. Water quality. Physical, chemical and biochemical methodsExamination and determination of colour
BS 6068-2-2.23:1986, ISO 7875/1-1984. Water quality. Physical, chemical and biochemical methodsMethod for the determination of anionic surfactants by the methylene blue spectrometric method
BS 6068-2-2.28:1986, ISO 6878/1-1986. Water quality. Physical, chemical and biochemical methodsMethod for the determination of phosphorus: ammonium molybdate spectrometric method
BS 6068-2-2.32:1987, ISO 8467-1986. Water quality. Physical, chemical and biochemical methodsMethod for the determination of permanganate index
BS 6068-2-2.35:1989. Water quality. Physical, chemical and biochemical methodsMethod for the determination of electrical conductivity
BS 6068-2-2.38:1990, ISO 9174:1990. Water quality. Physical, chemical and biochemical methodsMethods for the determination of total chromium by atomic absorption spectrometry
BS 6068-2-2.4:1984, ISO 5666/1-1983. Water quality. Physical, chemical and biochemical methodsDetermination of total mercury by flameless atomic absorption spectrometry: method after digestion with permanganate-peroxodisulphate
BS 6068-2-2.5:1984, ISO 5666/2-1983. Water quality. Physical, chemical and biochemical methodsDetermination of total mercury by flameless atomic absorption spectrometry: method after pretreatment with ultraviolet radiation
BS 6068-2-2.6:1984, ISO 5666/3-1984. Water quality. Physical, chemical and biochemical methodsDetermination of total mercury by flameless atomic absorption spectrometry: method after digestion with bromine
BS 6068-3.1:1993, ISO 9696:1992. Water quality. Radiological methodsMeasurement of gross alpha activity in non-saline water: thick source method
BS 6068-3.2:1993, ISO 9697:1992. Water quality. Radiological methodsMeasurement of gross beta activity in non-saline water
BS 6068-4.12:1998, ISO 11731:1998. Water quality. Microbiological methodsDetection and enumeration of Legionella
BS 6068-4.2:1989, ISO 8199:1988. Water quality. Microbiological methodsGuide to the enumeration of micro-organism by culture
BS 6068-4.4:1989. Water quality. Microbiological methodsDetection and enumeration of faecal streptococci by the membrane filtration technique
BS 6068-4-4.1:1988. Water quality. Microbiological methods.Method for evaluation of membrane filters used for microbiological analyses
BS 6068-4-4.3:1989. Water quality. Microbiological methodsDetection and enumeration (most probable number) of faecal streptococci by the multiple tube technique
BS 6068-4-4.5:1989, ISO 6222:1988. Water quality. Microbiological methodsMethod for the enumeration of viable micro-organisms: colony count by inoculation in or on a nutrient agar culture medium
BS 6068-4-4.6:1989, ISO 8360-1:1988. Water quality. Microbiological methodsDetection and enumeration of Pseudomonas aeruginosa by enrichment in liquid medium
BS 6068-4-4.7:1989, ISO 8360-2:1988. Water quality. Microbiological methodsDetection and enumeration of Pseudomonas aeruginosa by membrane filtration
BS 6068-5.0:1998, ISO/TR 15462:1997. Water quality. Biological methodsSelection of tests for biodegradability
BS 6068-5.17:1995, ISO 10229:1994. Water quality. Biological methodsDetermination of the prolonged toxicity of substances to freshwater fish. Method for evaluating the effects of substances on the growth rate of rainbow trout [Oncorhynchus mykiss Walbaum (Teleostei, Salmonidae)]
BS 6068-5.24:1999, ISO 14669:1999. Water quality. Biological methodsDetermination of acute lethal toxicity to marine copepods (Copepoda, Crustacea)
BS 6068-5.25:1999, ISO 15522:1999. Water quality. Biological methodsDetermination of the inhibitory effect of water constituents on the growth of activated sludge microorganisms
BS 6068-5.28:2000, ISO 10706:2000. Water qualityDetermination of long term toxicity of substances to Daphnia magna Straus (Cladocera, Crustacea)
BS 6068-5-5.1:1983, ISO 6341:1982. Water quality. Methods for biological testing.Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea)
BS 6068-5-5.1:1990, ISO 6341:1989. Water quality. Biological methodsDetermination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea)
BS 6068-5-5.2:1985, ISO 7346-1:1984. Water quality. Biological methodsDetermination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)]: static method
BS 6068-5-5.3:1985, ISO 7346-2:1984. Water quality. Biological methodsDetermination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)]: semi-static method
BS 6068-5-5.4:1985, ISO 7346-3:1984. Water quality. Biological methodsDetermination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)]: flow-through method
BS 6068-5-5.6:1985, ISO 7827:1984. Water quality. Biological methodsEvaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds: method by analysis of dissolved organic carbon (DOC)
BS 6068-6.10:1993, ISO 5667-10:1992. Water quality. SamplingGuidance on sampling of waste waters
BS 6068-6.11:1993, ISO 5667-11:1993. Water quality. SamplingGuidance on sampling of groundwaters
BS 6068-6.12:1996, ISO 5667-12:1995. Water quality. SamplingGuidance on sampling of bottom sediments
BS 6068-6.14:1998, ISO 5667-14:1998. Water quality. SamplingGuidance on quality assurance of environmental water sampling and handling
BS 6068-6.15:1999, ISO 5667-15:1999. Water quality. SamplingGuidance on preservation and handling of sludge and sediment samples
BS 6068-6.4:1987, ISO 5667-4:1987. Water quality. SamplingGuidance on sampling from lakes, natural and man-made
BS 6068-6.5:1991, ISO 5667-5:1991. Water quality. SamplingGuidance on sampling of drinking water and water used for food and beverage processing
BS 6068-6.6:1991, ISO 5667-6:1990. Water quality. SamplingGuidance on sampling of rivers and streams
BS 6068-6.7:1994, ISO 5667-7:1993. Water quality. SamplingGuidance on sampling of water and steam in boiler plants
BS 6068-6.8:1993, ISO 5667-8:1993. Water quality. SamplingGuidance on sampling of wet deposition
BS 6068-6.9:1993, ISO 5667-9:1992. Water quality. SamplingGuidance on sampling from marine waters
BS 6068-6-6.2:1983, ISO 5667/2-1982. Water quality. Sampling.Guidance on sampling techniques
BS 6068-6-6.3:1986, ISO 5667/3-1985. Water quality. SamplingGuidance on the preservation and handling of samples
BS 6069-1:1981, ISO 4226-1980. Methods for characterization of air quality.Units of measurement
BS 6069-1:1994, ISO 4226:1993. Characterization of air qualityUnits of measurement
BS 6069-2:1983, ISO 4225-1980. Characterization of air quality.Glossary
BS 6069-2:1994, ISO 4225:1994. Characterization of air qualityGlossary
BS 6069-3.1:1989, ISO 8762:1988. Characterization of air quality. Workplace atmospheres.Method for the determination of vinyl chloride using a charcoal tube and a gas chromatograph
BS 6069-3.2:1991, ISO 8518:1990. Characterization of air quality. Workplace atmospheresMethod for the determination of particulate lead and lead compounds by flame atomic absorption spectrometry
BS 6069-3.3:1991, ISO 9486:1991. Characterization of air quality. Workplace atmospheres.Method for the determination of vaporous chlorinated hydrocarbons by charcoal tube/solvent desorption/gas chromatography
BS 6069-3.4:1991, ISO 9487:1991. Characterization of air quality. Workplace atmospheres.Method for the determination of vaporous aromatic hydrocarbons by charcoal tube/solvent desorption/gas chromatography
BS 6069-4.1:1990, ISO 7934:1989. Characterization of air quality. Stationary source emissionsMethod for the determination of the mass concentration of sulphur dioxide: hydrogen peroxide/barium perchlorate/Thorin method
BS 6069-4.2:1991. Characterization of air quality. Stationary source emissions.Method for the determination of asbestos plant emissions by fibre count measurement
BS 6069-4.3:1992, ISO 9096:1992. Characterization of air quality. Stationary source emissionsMethod for the manual gravimetric determination of concentration and mass flow rate of particulate material in gas-carrying ducts
BS 6069-4.4:1993, ISO 7935:1992. Characterization of air quality. Stationary source emissionsDetermination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
BS 6069-5.1:1994, ISO 8756:1994. Characterization of air quality. General.Handling of temperature, pressure and humidity data
BS 6070-0:1981. Methods of sampling and test for sodium carbonate for industrial useGeneral introduction
BS 6070-1:1981, ISO 740-1976. Methods of sampling and test for sodium carbonate for industrial useDetermination of total soluble alkali content
BS 6070-2:1981, ISO 742-1973. Methods of sampling and test for sodium carbonate for industrial useDetermination of chloride content
BS 6070-3:1981, ISO 745-1976. Methods of sampling and test for sodium carbonate for industrial useDetermination of non-volatile matter
BS 6070-4:1981, ISO 746-1976. Methods of sampling and test for sodium carbonate for industrial useDetermination of matter insoluble in water
BS 6070-5:1981, ISO 5143-1977. Methods of sampling and test for sodium carbonate for industrial useDetermination of sulphate content
BS 6070-6. Methods of sampling and test for sodium carbonate for industrial use. Determination of pouring density
BS 6070-7:1981. Methods of sampling and test for sodium carbonate for industrial useDetermination of copper content
BS 6071:1981. Specification for periodic inspection and maintenance of transportable gas containers for dissolved acetylene
BS 607-2:1970. Specification for concrete poles for electrical transmission and traction systems.Metric units
BS 6072:1981. Method for magnetic particle flaw detection
BS 6073-1:1981. Precast concrete masonry unitsSpecification for precast concrete masonry units
BS 6073-2:1981. Precast concrete masonry unitsMethod for specifying precast concrete masonry units
BS 6073-2:2008. Precast concrete masonry unitsGuide for specifying precast concrete masonry units
BS 6074:1981, ISO 6485-1980. Method for determination of the volumetric rating of tractor-scrapers for earth-moving machinery
BS 6075-0:1981. Methods of sampling and test for sodium hydroxide for industrial useGeneral introduction
BS 6075-1:1981, ISO 979-1974. Methods of sampling and test for sodium hydroxide for industrial useDetermination of sodium hydroxide content
BS 6075-10:1981, ISO 5992-1979. Methods of sampling and test for sodium hydroxide for industrial useDetermination of mercury content (photometric method)
BS 6075-11:1981, ISO 5993-1979. Methods of sampling and test for sodium hydroxide for industrial useDetermination of mercury content (flameless atomic absorption method)
BS 6075-12:1981. Methods of sampling and test for sodium hydroxide for industrial useDetermination of copper content
BS 6075-14:1981. Methods of sampling and test for sodium hydroxide for industrial useDetermination of matter insoluble in water
BS 6075-2:1981, ISO 981-1973. Methods of sampling and test for sodium hydroxide for industrial useDetermination of chloride content (mercurimetric method)
BS 6075-3:1981, ISO 983-1974. Methods of sampling and test for sodium hydroxide for industrial useDetermination of iron content
BS 6075-4:1981, ISO 984-1974. Methods of sampling and test for sodium hydroxide for industrial useDetermination of silica content
BS 6075-5:1981, ISO 3195-1975. Methods of sampling and test for sodium hydroxide for industrial useSampling and preparation of main test solution
BS 6075-6:1981, ISO 3196-1975. Methods of sampling and test for sodium hydroxide for industrial useDetermination of carbonate content
BS 6075-7:1981, ISO 3197-1975. Methods of sampling and test for sodium hydroxide for industrial useDetermination of chloride content (photometric method)
BS 6075-8:1981, ISO 3198-1975. Methods of sampling and test for sodium hydroxide for industrial useDetermination of sulphate content
BS 6075-9:1981, ISO 3697-1976. Methods of sampling and test for sodium hydroxide for industrial useDetermination of calcium and magnesium contents
BS 6076:1981. Specification for tubular polyethylene film for use as protective sleeving for buried iron pipes and fittings
BS 6076:1996. Specification for polymeric film for use as a protective sleeving for buried iron pipes and fittings (for site and factory application)
BS 6078:1981, IEC 60643:1979. Guide to the application of digital computers to nuclear reactor instrumentation and control
BS 6079-1:2000. Project managementGuide to project management
BS 6079-1:2002. Project managementGuide to project management
BS 6079-1:2010. Project managementPrinciples and guidelines for the management of projects
BS 6079-2:2000. Project managementVocabulary
BS 6079-3:2000. Project managementGuide to the management of business related project risk
BS 6080-1-1.1:1981, IEC 60510-1:1975,IEC 60510-1A:1980. Methods of measurement for radio equipment used in satellite earth stationsGeneral
BS 6080-1-1.3:1981, IEC 60510-1-3:1980. Methods of measurement for radio equipment used in satellite earth stations. Measurements common to sub-systems and combinations of sub-systems.Measurements in the i.f. range
BS 6080-2.1:1981, IEC 60510-2-1:1978. Methods of measurement for radio equipment used in satellite earth stationsMeasurements for sub-systems. Section one. General. Section two. Antenna (including feed network)
BS 6080-3-3.2:1982, IEC 60510-3-2:1980. Methods of measurement for radio equipment used in satellite earth stationsMeasurement of the figure of merit (G/T) of the receiving system in the 4 GHz to 6 GHz range
BS 6081:1978. Specification for terminations for mineral insulated cables
BS 6081:1989. Specification for terminations for mineral-insulated cables
BS 6083-1:1984, IEC 60118-1:1983. Hearing aidsMethod for measurement of characteristics of hearing aids with induction pick-up coil input
BS 6083-10:1988, IEC 60118-10:1996. Hearing aids.Guide to hearing aid standards
BS 6083-11:1984, IEC 60118-11:1983. Hearing aids.Specification for symbols and other markings on hearing aids and related equipment
BS 6083-2:1984, IEC 60118-2:1983. Hearing aidsMethods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits
BS 6083-3:1984. Hearing aids.Methods for measurement of electroacoustical characteristics of hearing aid equipment not entirely worn on the listener
BS 6083-3:1991, IEC 60118-3:1983. Hearing aids.Methods for measurement of electroacoustical characteristics of hearing aid equipment not entirely worn on the listener
BS 6083-4:1981. Hearing aidsSpecification for magnetic field strength in audio-frequency induction loops for hearing aid purposes
BS 6083-5:1984, IEC 60118-5:1983. Hearing aids.Specification for dimensions of the nipple and sealing device for insert earphones
BS 6083-8:1985, IEC 60118-8:1983. Hearing aids.Methods for measurement of the performance characteristics of hearing aids under simulated in situ working conditions
BS 6083-9:1986, IEC 60118-9:1985. Hearing aids.Methods for measurement of characteristics of hearing aids with bone vibrator output
BS 6084:1981. Method of test for comparison of prefabrication primers by porosity rating in arc welding
BS 6084-1:1997. Methods for the evaluation of prefabrication primersRating and weldability tests
BS 6085:1981. Methods of test for determination of the resistance of textiles to microbiological deterioration
BS 6085:1992. Methods for determination of the resistance of textiles to microbiological deterioration
BS 6086:1981, ISO 5128-1980. Method of measurement of noise inside motor vehicles
BS 6087:1981. Specification for flexible joints for cast iron drainpipes and fittings (BS 437) and for cast iron soil, waste and ventilating pipes and fittings (BS 416)
BS 6087:1990. Specification for flexible joints for grey or ductile cast iron drainpipes and fittings (BS 437) and for discharge and ventilating pipes and fittings (BS 416)
BS 6088:1981. Specification for solid glass beads for use with road marking compounds and for other industrial uses
BS 6089:1981. Guide to assessment of concrete strength in existing structures
BS 6089:2010. Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN 13791
BS 6090:1981, ISO 1757-1980. Specification for personal photographic dosemeters
BS 6091-1:1981, IEC 60667-1:1980. Vulcanized fibre for electrical purposes.Specification of general requirements
BS 6091-2:1987, IEC 60667-2:1982. Vulcanized fibre for electrical purposes.Methods of test
BS 6091-3.1:1995, IEC 60667-3-1:1986. Vulcanized fibre for electrical purposes. Specifications for individual materialsFlat sheets
BS 6092-0:1981. Methods of sampling and test for sodium and potassium silicates for industrial useGeneral introduction
BS 6092-1:1981, ISO 1687-1976. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of solution density at 20°C
BS 6092-10:1981. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of matter insoluble in water
BS 6092-11:1981. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of chloride content of sodium metasilicate
BS 6092-12:1981. Methods of sampling and test for sodium and potassium silicates for industrial useLimit test for sulphate content of sodium metasilicate
BS 6092-2:1981, ISO 1688-1976. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of total solids content
BS 6092-3:1981, ISO 1690-1976. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of silica content (gravimetric method)
BS 6092-4:1981, ISO 1691-1976. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of carbonate content
BS 6092-5:1981, ISO 1692-1976. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of total alkali content
BS 6092-6:1981, ISO 2122-1972. Methods of sampling and test for sodium and potassium silicates for industrial usePreparation of solutions of not readily soluble products and determination of matter insoluble in water
BS 6092-7:1981, ISO 2124-1972. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of silica content (titrimetric method)
BS 6092-8:1981, ISO 3200-1975. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of sulphate content
BS 6092-9:1981, ISO 3201-1975. Methods of sampling and test for sodium and potassium silicates for industrial useDetermination of iron content
BS 6093:1981. Code of practice for design of joints and jointing in building construction
BS 6093:1993. Code of practice for design of joints and jointing in building construction
BS 6093:2006+A1:2013. Design of joints and jointing in building construction. Guide
BS 6094-1:1981, ISO 5264-1:1979. Methods for laboratory beating of pulpsValley beater method
BS 6095:1981, ISO 5270:1979. Methods for determination of the physical properties of laboratory sheets made from pulps
BS 6096-1:1981. Marking inks and solder resist coating materials for printed circuitsMethods of test
BS 6096-2:1981. Marking inks and solder resist coating materials for printed circuitsSpecification for marking inks
BS 6096-3:1981. Marking inks and solder resist coating materials for printed circuits.Specification for solder resist inks
BS 6096-4:1981. Marking inks and solder resist coating materials for printed circuits.Specification for permanent polymer (dry film solder mask) material
BS 6097:1981, ISO 2254-1980. Specification for whole and ground (powdered) cloves
BS 6098:1981. Recommendations for citation of published sound recordings
BS 6099-1:1981, IEC 60614-1:1978. Conduits for electrical installationsSpecification of general requirements
BS 6099-2-2.2:1982, IEC 60614-2-2:1980. Conduits for electrical installations. Particular specificationsSpecification for rigid plain conduits of insulating material
BS 61:1969. Specification for threads for light gauge copper tubes and fittings
BS 6100-0:1984. Glossary of building and civil engineering termsIntroduction
BS 6100-0:1986. Glossary of building and civil engineering terms.Introduction
BS 6100-0:1990. Glossary of building and civil engineering termsIntroduction
BS 6100-0:1992. Glossary of building and civil engineering termsIntroduction
BS 6100-0:2002. Glossary of building and civil engineering termsIntroduction
BS 6100-0:2010. Building and civil engineering. VocabularyIntroduction and index
BS 6100-1.0:1992. Glossary of building and civil engineering terms. General and miscellaneousGeneral
BS 6100-1.0:1999. Glossary of building and civil engineering terms. General and miscellaneousGeneral
BS 6100-1.1:1987. Glossary of building and civil engineering terms. General and miscellaneousTypes of building
BS 6100-1.2:1992. Glossary of building and civil engineering terms. General and miscellaneousSpaces
BS 6100-1.3.0:1991. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksExternal works
BS 6100-1.3.1:1987. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works.Walls and cladding
BS 6100-1.3.1:1992. Glossary of building and civil engineering terms. General and miscellaneousWalls and cladding
BS 6100-1.3.2:1985. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works.Roofs and roofing
BS 6100-1.3.2:1989. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksRoofs and roofing
BS 6100-1.3.3:1987. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksFloors and ceilings
BS 6100-1.3.4:1989. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksStairs and circulation elements
BS 6100-1.3.5:1988. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksDoors, windows and openings
BS 6100-1.3.5:1999. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksDoors, windows and openings
BS 6100-1.3.6:1991. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksJointing products, builders' hardware and accessories
BS 6100-1.3.7:1991. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksFinishes
BS 6100-1.3.8:1990. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction worksSigns and signing
BS 6100-1.4.1:1990. Glossary of building and civil engineering terms. General and miscellaneous. MaterialsGlazing
BS 6100-1.4.1:1999. Glossary of building and civil engineering terms. General and miscellaneous. MaterialsGlazing
BS 6100-1.5.1:1984. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipmentCoordination of dimensions. Tolerances and accuracy
BS 6100-1.5.1:1999. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipmentCo-ordination of dimensions. Tolerances and accuracy
BS 6100-1.5.2:1987. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipmentJointing
BS 6100-1.5.3:1988. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipmentSetting out and measurement
BS 6100-1.5.5:1991. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipmentPlant and equipment
BS 6100-1.5.6:1988. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipmentDocumentation excluding drawings
BS 6100-1.5.7:1988. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipmentDrawings
BS 6100-1.6:1985. Glossary of building and civil engineering terms. General and miscellaneousPersons
BS 6100-1.7.1:1986. Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performancePerformance
BS 6100-1.7.2:1989. Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performanceCharacteristics
BS 6100-1.8:1990. Glossary of building and civil engineering terms. General and miscellaneousEnvironment and physical planning
BS 6100-1:2004, BS ISO 6707-1:2004. Building and civil engineering. VocabularyGeneral terms
BS 6100-10:2007. Building and civil engineering. VocabularyContract terms
BS 6100-1-1.0:1984. Glossary of building and civil engineering terms. General and miscellaneousGeneral
BS 6100-1-1.2:1985. Glossary of building and civil engineering terms. General and miscellaneous.Spaces
BS 6100-11:2007. Building and civil engineering. VocabularyPerformance characteristics, measurement and joints
BS 6100-12:2008. Building and civil engineering. VocabularyPlant, equipment and persons
BS 6100-2.1:1992. Glossary of building and civil engineering terms. Civil engineeringStructural design and elements
BS 6100-2.2.1:1990. Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. TunnelsEarthworks
BS 6100-2.2.1:1992. Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. TunnelsEarthworks
BS 6100-2.2.2:1990. Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. TunnelsSubstructures and foundations
BS 6100-2.2.2:1999. Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. TunnelsSubstructures and foundations
BS 6100-2.2.3:1990. Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. TunnelsTunnels
BS 6100-2.3:1992. Glossary of building and civil engineering terms. Civil engineeringSuperstructures. Bridges. Large span structures
BS 6100-2.4.1:1986. Glossary of building and civil engineering terms. Civil engineering. Highway, railway and airport engineeringHighway engineering
BS 6100-2.4.1:1990. Glossary of building and civil engineering terms. Civil engineering. Highway, railway and airport engineeringHighway engineering
BS 6100-2.4.1:1992. Glossary of building and civil engineering terms. Civil engineering. Highway, railway and airport engineeringHighway engineering
BS 6100-2.4.2:1988. Glossary of building and civil engineering terms. Civil engineering. Highway, railway and airport engineeringRailway engineering
BS 6100-2.4.3:1992. Glossary of building and civil engineering terms. Civil engineering. Highway, railway and airport engineeringAirport engineering
BS 6100-2.5:1991. Glossary of building and civil engineering terms. Civil engineeringHydraulic engineering and construction work
BS 6100-2.6:1991. Glossary of building and civil engineering terms. Civil engineeringNatural waters. Inland. Coastal. Marine
BS 6100-2.7:1992. Glossary of building and civil engineering terms. Civil engineeringPublic health. Environmental engineering
BS 6100-2.8:1990. Glossary of building and civil engineering terms. Civil engineeringPipelines and ducts
BS 6100-2:2007. Building and civil engineering. VocabularySpaces, building types, environment and physical planning
BS 6100-2-2.1:1984. Glossary of building and civil engineering terms. Civil engineeringStructural design and elements
BS 6100-2-2.3:1989. Glossary of building and civil engineering terms. Civil engineeringSuperstructures. Bridges. Large span structures
BS 6100-2-2.7:1988. Glossary of building and civil engineering terms. Civil engineeringPublic health. Environmental engineering
BS 6100-3.1:1986. Glossary of building and civil engineering terms. ServicesEnergy sources and distribution
BS 6100-3.2.1:1984. Glossary of building and civil engineering terms. Services. Internal communication and transportInternal communication
BS 6100-3.2.2:1984. Glossary of building and civil engineering terms. Services. Internal communication and transportInternal transport
BS 6100-3.3:1992. Glossary of building and civil engineering terms. ServicesSanitation
BS 6100-3.4:1985. Glossary of building and civil engineering terms. ServicesLighting
BS 6100-3:2007. Building and civil engineering. VocabularyCivil engineering. General
BS 6100-3-3.3:1991. Glossary of building and civil engineering terms. ServicesSanitation
BS 6100-4.1:1992. Glossary of building and civil engineering terms. Forest productsCharacteristics and properties of timber and wood based panel products
BS 6100-4.2:1984. Glossary of building and civil engineering terms. Forest productsSizes and quantities of solid timber
BS 6100-4.3:1984. Glossary of building and civil engineering terms. Forest productsWood based panel products
BS 6100-4.4:1992. Glossary of building and civil engineering terms. Forest productsCarpentry and joinery
BS 6100-4.5:1984. Glossary of building and civil engineering terms. Forest productsCork
BS 6100-4:2008. Building and civil engineering. VocabularyTransport
BS 6100-4-4.1:1984. Glossary of building and civil engineering terms. Forest productsCharacteristics and properties of timber and wood based panel products
BS 6100-4-4.4:1985. Glossary of building and civil engineering terms. Forest products.Carpentry and joinery
BS 6100-5.1:1992. Glossary of building and civil engineering terms. MasonryTerms common to masonry
BS 6100-5.2:1992. Glossary of building and civil engineering terms. MasonryStone
BS 6100-5.3:1984. Glossary of building and civil engineering terms. MasonryBricks and blocks
BS 6100-5:2009. Building and civil engineering. VocabularyCivil engineering. Water engineering, environmental engineering and pipe lines
BS 6100-5-5.1:1985. Glossary of building and civil engineering terms. Masonry.Terms common to masonry
BS 6100-5-5.2:1984. Glossary of building and civil engineering terms. MasonryStone
BS 6100-6.1:1984. Glossary of building and civil engineering terms. Concrete and plasterBinders
BS 6100-6.2:1986. Glossary of building and civil engineering terms. Concrete and plasterConcrete
BS 6100-6.3:1984. Glossary of building and civil engineering terms. Concrete and plasterAggregates
BS 6100-6.4:1986. Glossary of building and civil engineering terms. Concrete and plasterAdmixtures
BS 6100-6.5:1987. Glossary of building and civil engineering terms. Concrete and plasterFormwork
BS 6100-6.6.1:1991. Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operationsConcrete and mortar
BS 6100-6.6.1:1992. Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operationsConcrete and mortar
BS 6100-6.6.2:1990. Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operationsPlaster
BS 6100-6:2008. Building and civil engineering. VocabularyConstruction parts
BS 6100-7:2008. Building and civil engineering. VocabularyServices
BS 6100-8:2007. Building and civil engineering. VocabularyWork with timber and wood-based panels
BS 6100-9:2007. Building and civil engineering. VocabularyWork with concrete and plaster
BS 6101-1:1981. Machine tool ball screws.Methods of calculating dynamic and static load and life ratings
BS 6101-2:1982. Machine tool ball screws.Specification for accuracy, including geometrical tests
BS 6101-2:1991. Machine tool ball screws.Specification for accuracy, including geometrical tests
BS 6101-3:1984. Machine tool ball screws.Glossary of terms
BS 6101-3:1992, ISO 3408-1:1991. Machine tool ball screws.Glossary of terms
BS 6101-4:1987. Machine tool ball screws.Method of calculation of static axial rigidity
BS 6101-5:1984. Machine tool ball screws.Specification for nominal diameters and nominal leads
BS 6101-5:1992, ISO 3408-2:1991. Machine tool ball screws.Specification for nominal diameters and nominal leads
BS 6101-6:1990. Machine tool ball screws.Specification for ball nuts and principal dimensions of ball screws
BS 6102-1:1981. CyclesSpecification for safety requirements for bicycles
BS 6102-1:1992. CyclesSpecification for safety requirements for bicycles
BS 6102-10:1987, ISO 8488-1986. CyclesSpecification for screw threads used to assemble head fittings on bicycle forks
BS 6102-11:1991, ISO 6699:1990. CyclesSpecification for assembly dimensions for stem and handlebar bend
BS 6102-12:1991, ISO 8562:1990. CyclesSpecification for stem wedge angle
BS 6102-13:1991, ISO 10230:1990. CyclesSpecification for mating dimensions for splined hub and sprocket
BS 6102-14:1991, ISO 6695:1991. CyclesSpecification for dimensions of bottom bracket axle and crank assembly with square end fittings
BS 6102-15:1991, ISO 6701:1991. CyclesSpecification for dimensions of spoke nipples
BS 6102-16:1997. CyclesSpecification for replacement brake blocks
BS 6102-2:1982. CyclesSpecification for photometric and physical requirements of reflective devices
BS 6102-3:1986. CyclesSpecification for photometric and physical requirements of lighting equipment
BS 6102-4:1991, ISO 8090:1989. CyclesGlossary of terms
BS 6102-5:1990, ISO 5775-1:1988. CyclesSpecification for bicycle tyre designations and dimensions
BS 6102-5:1996, ISO 5775-1:1994. CyclesSpecification for bicycle tyre designations and dimensions
BS 6102-5:1998, ISO 5775-1:1997. CyclesSpecification for bicycle tyre designations and dimensions
BS 6102-6:1990, ISO 5775-2:1989. CyclesSpecification for bicycle rims
BS 6102-6:1997, ISO 5775-2:1996. CyclesSpecification for bicycle rims
BS 6102-7:1982, ISO 6693:1981. CyclesSpecification for cotter pins and assembly of the axle/cotter pin/crank
BS 6102-8:1982, ISO 6698-1981. Cycles.Specification for screw threads used to assemble freewheels on bicycle hubs
BS 6102-8:1990, ISO 6698:1989. CyclesSpecifications for screw threads used to assemble freewheels on bicycle hubs.
BS 6102-9:1990, ISO 6696:1989. CyclesSpecification for screw threads used in bottom bracket assemblies
BS 6103:1986, IEC 60620:1984. Specification for dimensions for the mounting of single-hole, bush-mounted spindle operated electronic components
BS 6104-1:1981. Mechanical properties of fasteners.Specification for bolts, screws and studs
BS 6104-2:1983. Mechanical properties of fasteners.Specification for nuts with specified proof load values
BS 6104-3:1981, ISO 898/5-1980. Mechanical properties of fastenersSpecification for set screws and similar threaded fasteners not under tensile stresses
BS 6105:1981, ISO 3506:1979. Specification for corrosion-resistant stainless steel fasteners
BS 6106:1981. Specification for 1 pint (568 ml) multi-trip glass bottles for pasteurized milk
BS 6107-1:1981, ISO 1132-1980. Rolling bearings: tolerancesGlossary of terms
BS 6107-2:1982, ISO 492-1981. Rolling bearings: tolerances.Specification for tolerances of radial bearings
BS 6107-2:1987, ISO 492-1986. Rolling bearings: tolerancesSpecification for tolerances of radial bearings
BS 6107-2:1995, ISO 492:1994. Rolling bearings: tolerancesSpecification for tolerances of radial bearings
BS 6107-3:1981, ISO 5753-1981. Rolling bearings: tolerances.Specification for radial internal clearance
BS 6107-3:1992, ISO 5753:1991. Rolling bearings: tolerances.Specifications for radial internal clearance
BS 6108:1981, ISO 6489/1-1980. Specification for dimensions of hook-type couplings on agricultural towing vehicles
BS 6108-1:1993, ISO 6489-1:1991. Couplings on agricultural towing vehiclesSpecification for hook type
BS 6109-1:1981. Tail lifts, mobile lifts and ramps associated with vehiclesCode of practice for tail lifts
BS 6109-2:1989. Tail lifts, mobile lifts and ramps associated with vehicles.Code of practice for passenger lifts and ramps
BS 611-1:1978. Petri dishes.Specification for glass Petri dishes
BS 6111:1981, IEC 60126:1973. Specification for reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts
BS 611-2:1982. Petri dishes.Specification for plastics Petri dishes for single use
BS 6112:1983, EN 22860:1985. Recommendations for minimum access dimensions for earth-moving machinery
BS 611-2:1990. Petri dishesSpecification for plastics Petri dishes for single use
BS 6113:1981, ISO 6483-1980. Method for volumetric rating of dumper bodies used for earth-moving
BS 6114:1981, ISO 6484-1980. Method for volumetric rating of elevating scrapers used for earth-moving
BS 6114:1987, ISO 6484-1986. Method for measurement of volumetric ratings of elevating scrapers used for earth-moving
BS 6115:1981. Specification for sealed nickel-cadmium prismatic rechargeable single cells
BS 6116:1970. Specification for elastomer-insulated flexible trailing cables for quarries and miscellaneous mines
BS 6117:1981. Specification for glass bottles for light wine
BS 6118:1981. Specification for multi-trip glass bottles for beer and cider
BS 6119-1:1981. Glass bottles for carbonated soft drinksSpecification for 750 ml and 1 litre multi-trip bottles
BS 612:1966. Specification for Nessler cylinders
BS 6120:1982, EN 50036. Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for alternating current, 2 terminals
BS 6120:1988, EN 50036:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for alternating current, 2 terminals
BS 6121:1973. Specification for mechanical cable glands for elastomer and plastics insulated cables
BS 6121-1:1987. Mechanical cable glands.Specification for metallic glands
BS 6121-1:1989. Mechanical cable glandsSpecification for metallic glands
BS 6121-1:2005. Mechanical cable glandsArmour glands. Requirements and test methods
BS 6121-2:1989. Mechanical cable glandsSpecification for polymeric glands
BS 6121-3:1990. Mechanical cable glands.Specification for special corrosion resistant glands
BS 6121-5:1993. Mechanical cable glands.Code of practice for selection, installation and inspection of cable glands used in electrical installations
BS 6121-5:2005. Mechanical cable glandsCode of practice for selection, installation and inspection of cable glands and armour glands
BS 6122:1982, EN 50037. Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for alternating current, 2 terminals
BS 6122:1988, EN 50037:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for alternating current, 2 terminals
BS 6123:1982, EN 50038. Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for alternating current, 2 terminals
BS 6123:1988, EN 50038:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for alternating current, 2 terminals
BS 6124:1981, ISO 6682-1980. Specification for zones of comfort and reach for controls in earth-moving machinery
BS 6125:1981. Specification for natural fibre cords, lines and twines
BS 6126:1981, IEC 60658:1979. Specification for dimensions of radiographic intensifying screens for medical use
BS 6127-1:1981. Petrographic analysis of bituminous coal and anthraciteGlossary of terms relating to the petrographic analysis of bituminous coal and anthracite
BS 6127-1:1995, ISO 7404-1:1994. Petrographic analysis of bituminous coal and anthraciteGlossary of terms relating to the petrographic analysis of bituminuous coal and anthracite
BS 6127-2:1982. Petrographic analysis of bituminous coal and anthraciteMethod of preparing coal samples for petrographic analysis
BS 6127-3:1981. Petrographic analysis of bituminous coal and anthraciteMethod of determining maceral group composition of bituminous coal and anthracite
BS 6127-3:1995, ISO 7404-3:1994. Petrographic analysis of bituminous coal and anthraciteMethod of determining maceral group composition of bituminous coal and anthracite
BS 6127-4:1990, ISO 7404-4:1988. Petrographic analysis of bituminous coal and anthraciteMethod of determining microlithotype, carbominerite and minerite composition
BS 6127-5:1981. Petrographic analysis of bituminous coal and anthraciteMethod of determining microscopically the reflectance of vitrinite
BS 6127-5:1995, ISO 7404-5:1994. Petrographic analysis of bituminous coal and anthraciteMethod of determining microscopically the reflectance of vitrinite
BS 6128-1:1981. Industrial laminated rods and tubes based on thermosetting resinsClassification and methods of test
BS 6128-13:1983. Industrial laminated rods and tubes based on thermosetting resinsSpecification for rectangular moulded tubes
BS 6128-2:1981. Industrial laminated rods and tubes based on thermosetting resinsSpecification for round moulded rods
BS 6128-3:1981. Industrial laminated rods and tubes based on thermosetting resins.Specification for round pultruded rods
BS 6128-4:1981. Industrial laminated rods and tubes based on thermosetting resinsSpecification for rectangular moulded rods
BS 6128-5:1981. Industrial laminated rods and tubes based on thermosetting resins.Specification for rectangular pultruded rods
BS 6128-6:1981. Industrial laminated rods and tubes based on thermosetting resinsSpecification for hexagonal moulded rods
BS 6128-7:1981. Industrial laminated rods and tubes based on thermosetting resins.Specification for hexagonal pultruded rods
BS 6128-8:1982. Industrial laminated rods and tubes based on thermosetting resinsSpecification for round rolled tubes
BS 6128-9:1982. Industrial laminated rods and tubes based on thermosetting resinsSpecification for round moulded tubes
BS 6129-1:1981. Code of practice for the selection and application of bellows expansion joints for use in pressure systems.Metallic bellows expansion joints
BS 613:1977. Specification for components and filter units for electromagnetic interference suppression
BS 6130:1981. Specification for hose and hose assemblies for asphalt and bitumen
BS 6130-1:1993. Hose and hose assemblies for asphalt and bitumen.Specification for flexible metallic hose and hose assemblies
BS 6130-2:1994. Hose and hose assemblies for asphalt and bitumenSpecification for rubber hose and hose assemblies
BS 6131:1982. Glossary of terms relating to household sewing machines
BS 6132:1983. Code of practice for safe operation of alkaline secondary cells and batteries
BS 6133:1985. Code of practice for safe operation of lead-acid stationary cells and batteries
BS 6133:1995. Code of practice for safe operation of lead-acid stationary batteries
BS 6134:1981. Specification for pressure and vacuum switches
BS 6134:1991. Specification for pressure and vacuum switches
BS 6135:1981, ISO 2806-1980. Glossary of terms used in the numerical control of machines
BS 6136:1981. Specification for dental tweezers
BS 6137:1982. Specification for electroplated coatings of tin/lead alloys
BS 6138:1981. Glossary of terms used in the adhesives industry
BS 6138:1989. Glossary of terms used in the adhesives industry
BS 6139:1981. Specification for drawbars and towing hooks on agricultural tractors
BS 6140-1:1981, ISO 5344-1980. Test equipment for generating vibration.Methods of describing characteristics of electrodynamic test equipment for generating vibration
BS 6140-2:1982, ISO 6070:1981. Test equipment for generating vibration.Methods of describing characteristics of auxiliary tables for test equipment for generating vibration
BS 6141:1981. Specification for insulated cables and flexible cords for use in high temperature zones
BS 6141:1991. Specification for insulated cables and flexible cords for use in high temperature zones
BS 6142:1981. Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery
BS 6143:1981. Guide to the determination and use of quality related costs
BS 6143-1:1992. Guide to the economics of qualityProcess cost model
BS 6143-2:1990. Guide to the economics of qualityPrevention, appraisal and failure model
BS 6144:1981. Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems
BS 6144:1990. Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems
BS 6145:1981, ISO 3632-1980. Specification for saffron
BS 6145:1994, ISO 3632-1:1993. Specification for saffron
BS 6146-1:1981, IEC 60625-1:1979. An interface system for programmable measuring instruments (byte serial, bit parallel).Specification for functional, electrical and mechanical requirements, system applications and requirements for designer and user
BS 6146-2:1981, IEC 60625-2:1980. An interface system for programmable measuring instruments (byte serial, bit parallel).Guide for code and format conventions
BS 6147:1989. Methods for determination of bulk density of iron ores
BS 6147-1:1981, ISO 3852-1977. Methods of test for bulk density of iron ores.Determination of the bulk density of iron ore samples having a maximum particle size of 40 mm or smaller
BS 6147-2:1981, ISO 5464-1980. Methods of test for bulk density of iron ores.Determination of the bulk density of iron ore samples having a maximum particle size greater than 40 mm
BS 6148-1:1981, ISO 1992/I-1974. Methods of test for commercial refrigerated cabinetsCalculation of linear dimensions, areas and volumes
BS 6148-2:1981, ISO 1992/II-1973. Methods of test for commercial refrigerated cabinetsGeneral test conditions
BS 6148-3:1981, ISO 1992/III-1973. Methods of test for commercial refrigerated cabinetsDetermination of temperature
BS 6148-4:1981, ISO 1992/IV-1974. Methods of test for commercial refrigerated cabinetsDefrosting test
BS 6148-5:1981, ISO 1992/V-1974. Methods of test for commercial refrigerated cabinetsDetermination of water vapour condensation
BS 6148-6:1981, ISO 1992/VI-1974. Methods of test for commercial refrigerated cabinetsElectrical energy consumption test
BS 6148-7:1983. Methods of test for commercial refrigerated cabinetsElectrical tests
BS 6148-8:1981, ISO 1992-VIII:1978. Methods of test for commercial refrigerated cabinets.Test for accidental mechanical contact
BS 6149-1:1984, ISO 5366/1-1980. Tracheostomy tubes.Specification for connectors
BS 6149-1:1987, ISO 5366-1:1986. Tracheostomy tubesSpecification for connectors
BS 6149-2:1986, ISO 5366/2-1985. Tracheostomy tubes.Specification for tubes (excluding connectors)
BS 6149-2:1993, ISO 5366-2:1993. Tracheostomy tubesBasic requirements for tubes for adults
BS 615:1953. Specification for Kohlrausch flasks
BS 6150:1982. Code of practice for painting of buildings
BS 6150:1991. Code of practice for painting of buildings
BS 6150:2006. Painting of buildings. Code of practice
BS 6151:1992, ISO 5367:1991. Specification for breathing tubes for use with anaesthetic apparatus and ventilators
BS 6153:1982, ISO 5364-1980. Specification for oropharyngeal airways
BS 6153:1987, ISO 5364-1986. Specification for oropharyngeal airways
BS 61535:2006. Installation couplers intended for permanent connection in fixed installations
BS 6154:1981. Method of defining syntactic metalanguage
BS 6155:1981. Specification for tracheal tubes for large animals in veterinary anaesthesia
BS 6155:1990. Specification for tracheal tubes for large animals in veterinary anaesthesia
BS 6156:1981, IEC 60673:1980. Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single
BS 6157:1981. Specification for industrial sewing threads made wholly or partly from synthetic fibres
BS 6157:1990. Specification for industrial sewing threads made wholly or partly from synthetic fibres
BS 6158:1982. Specification for safety devices for fuel gases and oxygen or compressed air for welding, cutting and related processes
BS 6159-1:1981. Polyvinyl chloride boots.Specification for general industrial lined or unlined boots
BS 6159-1:1987. Polyvinyl chloride bootsSpecification for general and industrial lined or unlined boots
BS 616:1963. Methods for sampling coal tar and its products
BS 6160-1:1981, IEC 60489-1:1976. Methods of measurement for radio equipment used in the mobile services.General definitions and standard conditions of measurement
BS 6160-1:1989, IEC 60489-1:1983. Radio equipment used in mobile servicesGeneral requirements and conditions of measurement
BS 6160-2:1981, IEC 60489-2:1978. Radio equipment used in mobile servicesTransmitters employing A3 or F3 emissions
BS 6160-3:1981, IEC 60489-3:1979. Methods of measurement for radio equipment used in the mobile services.Receivers for A3 or F3 emissions
BS 6160-3:1990, IEC 60489-3:1988. Radio equipment used in mobile servicesMethods of measurement for receivers for A3E or F3E emissions
BS 6160-4:1981, IEC 60489-4:1980. Radio equipment used in mobile servicesTransmitters employing single-sideband emissions (A3A, A3H or A3J)
BS 6160-5:1981, IEC 60489-5:1979. Methods of measurement for radio equipment used in the mobile services.Receivers employing single-sideband techniques (A3A, A3H or A3J)
BS 6160-5:1989, IEC 60489-5:1987. Radio equipment used in mobile servicesMethods of measurement for receivers employing single-sideband techniques (R3E, H3E or J3E)
BS 6160-6:1989, IEC 60489-6:1987. Radio equipment used in mobile servicesMethods of measurement for selective-calling and data equipment
BS 6160-8:1994, IEC 60489-8:1984. Radio equipment used in mobile servicesMethods of measurement for antennas
BS 6161-1:1984, ISO 2106-1982. Methods of test for anodic oxidation coatings on aluminium and its alloysDetermination of mass per unit area (surface density) of anodic oxidation coatings (gravimetric method)
BS 6161-10:1987. Methods of test for anodic oxidation coatings on aluminium and its alloysMeasurement of mean specific abrasion resistance with an abrasive jet test apparatus
BS 6161-11:1985. Methods of test for anodic oxidation coatings on aluminium and its alloys.Measurement of total reflectance using a photoelectric reflectometer
BS 6161-12:1987. Methods of test for anodic oxidation coatings on aluminium and its alloysMeasurement of specular reflectance and specular gloss at angles of 20°, 45°, 60° or 85°
BS 6161-13:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys.Image clarity test using the Gardam grid
BS 6161-13:1993, ISO 10215:1992. Methods of test for anodic oxidation coatings on aluminium and its alloysVisual determination of image clarity. Chart scale method
BS 6161-14:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys.Determination of infra-red reflectance
BS 6161-15:1987. Methods of test for anodic oxidation coatings on aluminium and its alloysDetermination of electrical breakdown potential
BS 6161-16:1990, ISO 8993:1989. Methods of test for anodic oxidation coatings on aluminium and its alloysRating system for the evaluation of pitting corrosion. Chart method
BS 6161-17:1990, ISO 8994:1989. Methods of test for anodic oxidation coatings on aluminium and its alloysRating system for the evaluation of pitting corrosion. Grid method
BS 6161-18:1991. Methods of test for anodic oxidation coatings on aluminium and its alloysDetermination of surface abrasion resistance
BS 6161-19:1993, ISO 10216:1992. Methods of test for anodic oxidation coatings on aluminium and its alloysDetermination of image clarity. Instrumental method
BS 6161-2:1981, ISO 2128-1976. Methods of test for anodic oxidation coatings on aluminium and its alloysDetermination of thickness of anodic oxide coatings: non-destructive measurement by split-beam microscope
BS 6161-3:1984, ISO 3210-1983. Methods of test for anodic oxidation coatings on aluminium and its alloysAssessment of sealing quality by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
BS 6161-4:1981, ISO 2932:1981. Methods of test for anodic oxidation coatings on aluminium and its alloysAssessment of sealing quality by measurement of the loss of mass after immersion in acid solution
BS 6161-5:1982, ISO 2143-1981. Methods of test for anodic oxidation coatings on aluminium and its alloysEstimation of loss of absorptive power of sealed coatings: dye spot test with prior acid treatment
BS 6161-6:1984, ISO 2931-1983. Methods of test for anodic oxidation coatings on aluminium and its alloysAssessment of sealing quality by measurement of admittance or impedance
BS 6161-7:1984. Methods of test for anodic oxidation coatings on aluminium and its alloysAccelerated determination of light fastness of coloured anodic oxidation coatings using artificial light
BS 6161-8:1981, ISO 6581-1980. Methods of test for anodic oxidation coatings on aluminium and its alloysDetermination of the fastness to ultraviolet light of coloured anodic oxide coatings
BS 6161-9:1987. Methods of test for anodic oxidation coatings on aluminium and its alloysMeasurement of wear properties with an abrasive wheel wear test apparatus
BS 6162:1981. Specification for open-mouth sacks manufactured from woven polyolefin tape yarn
BS 6164:1982. Code of practice for safety in tunnelling in the construction industry
BS 6164:1990. Code of practice for safety in tunnelling in the construction industry
BS 6164:2001. Code of practice for safety in tunnelling in the construction industry
BS 6164:2011. Code of practice for health and safety in tunnelling in the construction industry
BS 6165:1981. Specification for small disposable fire extinguishers of the aerosol type
BS 6165:1992. Specification for small disposable fire extinguishers of the aerosol type
BS 6165:2002. Specification for small disposable fire extinguishers of the aerosol type
BS 6166:1981. Recommendations for rating of lifting gear for general purposes
BS 6166-1:1986. Lifting slingsMethods of rating
BS 6166-2:1986. Lifting slingsSpecification for marking
BS 6166-3:1988. Lifting slingsGuide to the selection and safe use of lifting slings for multi-purposes
BS 6167:1981. Specification for battery-operated electric fence controllers not suitable for connection to the supply mains
BS 6168:1982. Specification for non-metallic gears
BS 6168:1987. Specification for non-metallic spur gears
BS 6169-1:1981, ISO 2714:1980. Methods for volumetric measurement of liquid hydrocarbonsDisplacement meter systems (other than dispensing pumps)
BS 6169-2:1984, ISO 2715:1981. Methods for volumetric measurement of liquid hydrocarbonsTurbine meter systems
BS 6170:1981. Specification for flax canvas water buckets
BS 6171:1982. Specification for prefabricated sectional storage bunkers for domestic solid fuel
BS 6172:1982. Code of practice for installation of domestic gas cooking appliances (2nd family gases)
BS 6172:1990. Specification for installation of domestic gas cooking appliances (1st, 2nd and 3rd family gases)
BS 6172:2004. Installation and maintenance of domestic gas cooking appliances (2nd and 3rd family gases). Specification
BS 6172:2010. Specification for installation, servicing and maintenance of domestic gas cooking appliances (2nd and 3rd family gases)
BS 6173:1982. Code of practice for installation of gas catering appliances (2nd family gases)
BS 6173:1990. Specification for installation of gas-fired catering appliances for use in all types of catering establishments (1st, 2nd and 3rd family gases)
BS 6173:2001. Specification for installation of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)
BS 6173:2009. Specification for installation and maintenance of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)
BS 6174:1982. Specification for differential pressure transmitters with electrical outputs
BS 6175:1982. Specification for temperature transmitters with electrical outputs
BS 6176:1981, ISO 6989-1981. Method for determination of length and length distribution of staple fibres by measurement of single fibres
BS 6177:1982. Guide to selection and use of elastomeric bearings for vibration isolation of buildings
BS 6178-1:1982. Joist hangers.Specification for joist hangers for building into masonry walls of domestic dwellings
BS 6178-1:1990. Joist hangersSpecification for joist hangers for building into masonry walls of domestic dwellings
BS 6179:1982. Specification for tungsten filament lamps for general service (with lives of 2000 h)
BS 6180:1982. Code of practice for protective barriers in and about buildings
BS 6180:1995. Code of practice for barriers in and about buildings
BS 6180:1999. Barriers in and about buildings. Code of practice
BS 6180:2011. Barriers in and about buildings. Code of practice
BS 6181:1981, ISO 6589-1981. Method of test for air permeability of joints in building
BS 6182-1:1982. Intrinsically safe power supplies for use in coal mines.Specification for d.c. power supplies
BS 6182-1:1994. Intriniscally safe power supplies for use in coal mines.Specification for d.c. power supplies
BS 6182-2:1982. Intrinsically safe power supplies for use in coal mines.Specification for a.c. power supplies
BS 6182-3:1982. Intrinsically safe power supplies for use in coal mines.Specification for rechargeable battery units
BS 6183-1:1981. Protective equipment for cricketersSpecification for batting gloves, leg guards and boxes
BS 6183-1:2000. Protective equipment for cricketersGeneral requirements
BS 6183-2:2000. Protective equipment for cricketersGenital protectors
BS 6183-3:2000. Protective equipment for cricketersLeg protectors for batsmen, wicket-keepers and fielders, and thigh, arm and chest protectors for batsmen
BS 6183-4:2001. Protective equipment for cricketersGloves for batsmen
BS 6184:1981, IEC 60044-4:1980. Method for measuring partial discharges in instrument transformers
BS 6185:1982. Specification for size designation of men's wear
BS 6186-1:1981, ISO 4156:1981. Specification for straight cylindrical involute splines: metric module, side fitDimensions and tolerances
BS 6186-1:Addendum No. 1:1993, ISO 4156:1981/Amendment 1:1992. Specification for straight cylindrical involute splines: metric module, side fitInspection
BS 6187:1982. Code of practice for demolition
BS 6187:2000. Code of practice for demolition
BS 6187:2011. Code of practice for full and partial demolition
BS 6188:1982, EN 116:1981. Method for determination of cold filter plugging point of diesel and domestic heating fuels
BS 6189:1981. Glossary of terms relating to fabrics and associated fibres, yarns and processes
BS 6189:1989. Glossary of terms relating to fabrics and associated fibres, yarns and processes
BS 6191-1:1981, ISO 5138/4-1981. Mail processing machinesGlossary of terms for letter opening machines
BS 6191-2:1981, ISO 5138/5-1981. Mail processing machinesGlossary of terms for letter folding machines
BS 6191-3:1982, ISO 5138/3-1981. Mail processing machinesGlossary of terms for addressing machines
BS 6191-4:1984, ISO 4232/3-1984. Mail processing machinesSpecification for minimum information to be included in specification sheets of postal franking machines
BS 6191-5:1985. Mail processing machinesGlossary of terms for document inserting machines
BS 6192:1982, EN 27185:1985,ISO 7185:1983. Specification for computer programming language Pascal
BS 6193:1988, EN 60662:1987,IEC 60662:1980. Specification for high-pressure sodium vapour lamps
BS 6193:1990, EN 60662:1989. Specification for high-pressure sodium vapour lamps
BS 6194:1981. Specification for dehydrated garlic
BS 6195:1969. Specification for insulated flexible cables and cords for coil leads
BS 6195:1993. Specification for insulated flexible cables and cords for coil leads
BS 6195:2006. Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads
BS 6196:1982. Specification for sterile epidural catheters and their introducer needles for single use
BS 6196:1989. Specification for sterile epidural catheters and introducer needles for single use
BS 6197:1985, ISO 6749-1984. Methods for preservation and storage of earth-moving machinery
BS 6198:1981, ISO 5004-1981. Method for measurement of tool movement time of earth-moving machinery
BS 6199-1.2:1991, ISO 9368-1:1990. Measurement of liquid flow in closed conduits using weighing and volumetric methods. Weighing methodProcedures for checking static weighing systems
BS 6200-1:1991. Sampling and analysis of iron, steel and other ferrous metalsIntroduction and contents
BS 6200-2.1:1993. Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparationMethods for iron and steel
BS 6200-2.2:1993. Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparationMethods for ferroalloys and other alloying additives
BS 6200-3.0:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysisSummary of methods
BS 6200-3.0:2002. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysisReference methods of analysis. Summary of methods
BS 6200-3.1.1:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminiumSteel, cast iron, low carbon ferro-chromium and chromium metal: volumetric method
BS 6200-3.1.2:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminiumSteel and cast iron: spectrophotometric method
BS 6200-3.1.4:1985, EU 134:1978. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminiumCarbon steel: atomic absorption spectrometric method
BS 6200-3.1.4:1990, EN 29658:1991,ISO 9658:1990. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminiumNon-alloyed steel: flame atomic absorption spectrometric method
BS 6200-3.1.5:1985, ISO 4139:1979. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminiumFerrosilicon: atomic absorption spectrometric method
BS 6200-3.1.6:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminiumPermanent magnet alloys: volumetric method
BS 6200-3.10.1:1985, EU 99:1980. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromiumSteel and cast iron: potentiometric/volumetric method
BS 6200-3.10.2:1989, EN 10188:1989. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromiumSteel and cast iron: flame atomic absorption spectrometric method
BS 6200-3.10.4:1985, ISO 4140:1979. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromiumFerrochromium and ferrosilicochromium: potentiometric method
BS 6200-3.10.5:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromiumFerrochromium: volumetric method
BS 6200-3.11.1:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobaltSteel and cast iron: spectrophotometric method
BS 6200-3.11.2:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobaltSteel, irons and steelmaking materials: spectrophotometric method for trace amounts
BS 6200-3.11.3:1997, ISO 11652:1997. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobaltFlame atomic absorption spectrometric method
BS 6200-3.12.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copperSteel and cast iron: volumetric method
BS 6200-3.12.2:1985, EN 24946:1990,ISO 4946:1984. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copperSteel and cast iron: spectrophotometric method
BS 6200-3.12.3:1986, EN 24943:1990,ISO 4943:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copperSteel and cast iron: flame atomic absorption spectrometric method
BS 6200-3.12.4:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copperCast iron: volumetric method
BS 6200-3.12.5:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copperPermanent magnet alloys: volumetric method
BS 6200-3.16.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of leadCarbon steels and low alloy steels: gravimetric method
BS 6200-3.16.2:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of leadSteel: spectrophotometric method
BS 6200-3.16.3:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of leadSteel: spectrophotometric method for trace amounts
BS 6200-3.16.4:1987, EN 10181:1989,EU 181:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of leadSteel: flame atomic absorption spectrometric method
BS 6200-3.17.1:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of magnesiumCast iron: volumetric method
BS 6200-3.18.2:1985, ISO 629:1982. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of manganeseSteel: spectrophotometric method
BS 6200-3.18.3:1985, EN 24159:1989,ISO 4159:1978. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of manganeseFerromanganese and ferrosilicomanganese: potentiometric method
BS 6200-3.18.4:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of manganeseSteel and cast iron: volumetric method
BS 6200-3.19.1:1985, ISO 4941:1978. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of molybdenumSteel and cast iron: photometric method
BS 6200-3.19.2:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of molybdenumFerromolybdenum: gravimetric method
BS 6200-3.19.3:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of molybdenumMolybdenum oxide and high grade molybdenite ores: gravimetric method
BS 6200-3.20.1:1989, EN 24938:1990,ISO 4938:1988. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nickelSteel and cast iron: gravimetric or titrimetric method
BS 6200-3.20.3:1985, ISO 4939:1984. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nickelSteel and cast iron: spectrophotometric method
BS 6200-3.20.4:1986, ISO 4940:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nickelSteel and cast iron: flame atomic absorption spectrometric method
BS 6200-3.21.1:1986, EN 10178:1989,EU 178:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of niobiumSteel: spectrophotometric method
BS 6200-3.22.1:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogenSteel: volumetric method
BS 6200-3.22.2:1985, ISO 4945:1977. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogenSteel: spectrophotometric method
BS 6200-3.22.3:1986, EN 10179:1989,EU 179:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogenSteel: spectrophotometric method (for trace amounts)
BS 6200-3.24.1:1985, ISO 2732:1984. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of phosphorusSteel and cast iron: spectrophotometric method
BS 6200-3.24.2:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of phosphorusFerrochromium, ferromanganese and ferromolybdenum: spectrophotometric method
BS 6200-3.26.1:1995, ISO 439:1994. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of siliconSteel and iron: gravimetric method.
BS 6200-3.26.2:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of siliconAcid-resisting high silicon iron: gravimetric method
BS 6200-3.26.3:1987, EN 24829-1:1990,ISO 4829-1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of siliconSteel and cast iron: spectrophotometric method for silicon contents from 0.05% (m/m) to 1.0% (m/m)
BS 6200-3.26.4:1989, EN 24829-2:1990,ISO 4829-2:1988. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of siliconSteel and cast iron: spectrophotometric method for silicon contents from 0.01% (m/m) to 0.05% (m/m)
BS 6200-3.26.5:1985, ISO 4158:1978. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of siliconFerrosilicon, ferrosilicomanganese and ferrosilicochromium: gravimetric method
BS 6200-3.28.1:1985, EN 24934:1989,ISO 4934:1980. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphurSteel and cast iron: gravimetric method
BS 6200-3.28.2:1990, EN 24935:1991,ISO 4935:1989. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphurSteel and cast iron: infra-red absorption method after combustion in an induction furnace
BS 6200-3.28.3:1995, ISO 10701:1994. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphurSteel and iron: spectrophotometric method
BS 6200-3.29.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tantalumSteel: spectrophotometric method
BS 6200-3.31.1:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tinSteel and cast iron: volumetric method
BS 6200-3.31.2:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tinFerrotungsten and tungsten metal: volumetric method
BS 6200-3.31.3:2002, ISO 15353:2001. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tinFlame atomic absorption spectrometric method (extraction as Sn-SCN)
BS 6200-3.32.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of titaniumSteel: spectrophotometric method
BS 6200-3.32.4:1985, ISO 7692:1983. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of titaniumFerrotitanium: volumetric method
BS 6200-3.33.1:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tungstenSteel: gravimetric method
BS 6200-3.33.2:1992. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tungstenSteel: spectrophotometric method
BS 6200-3.33.3:1985, ISO 7693:1984. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tungstenFerrotungsten: gravimetric method
BS 6200-3.34.1:1987, EN 24947:1991,ISO 4947:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of vanadiumSteel and cast iron: potentiometric titration method
BS 6200-3.34.2:1989, ISO 4942:1988. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of vanadiumSteel and cast iron: spectrophotometric method
BS 6200-3.34.3:1990, ISO 9647:1989. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of vanadiumSteel and cast iron: flame atomic absorption spectrometric method
BS 6200-3.34.4:1985, ISO 6467:1980. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of vanadiumFerrovanadium: potentiometric method
BS 6200-3.37.1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of zirconiumSteel: gravimetric method
BS 6200-3.40.1:1997, ISO 13898-1:1997. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methodsDetermination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. General requirements and sample dissolution
BS 6200-3.40.2:1997, ISO 13898-2:1997. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methodsDetermination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel content
BS 6200-3.40.3:1997, ISO 13898-3:1997. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methodsDetermination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper content
BS 6200-3.40.4:1997, ISO 13898-4:1997. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methodsDetermination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt content
BS 6200-3.5.2:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boronFerroboron: volumetric method
BS 6200-3.5.3:1998, ISO 13900:1997. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boronCurcumin spectrophotometric method after distillation
BS 6200-3.7.1:1987, EN 10177:1989,EU 177:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of calciumSteel: flame atomic absorption spectrometric method
BS 6200-3.8.1:1985, ISO 437:1982. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of carbonSteel, cast iron and ferrochromium: gravimetric method
BS 6200-3.8.2:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of carbonSteel and cast iron: non-aqueous titrimetric method after combustion
BS 6200-3.8.3:1990, ISO 9556:1989. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of carbonSteel and cast iron: infra-red absorption method after combustion in an induction furnace
BS 6200-3.8.5:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of carbonCast iron and pig iron: gravimetric method for the determination of non-combined carbon
BS 6200-4:1989. Sampling and analysis of iron, steel and other ferrous metalsRecommendations for the order of listing elements in the chemical analysis of steel
BS 6200-5:1997. Sampling and analysis of iron, steel and other ferrous metalsGuidelines on statistical procedures
BS 6200-6.1:1990. Sampling and analysis of iron, steel and other ferrous metals. Guidelines on atomic absorption spectrometric techniquesRecommendations for the drafting of standard methods for the chemical analysis of iron and steel by flame atomic absorption spectrometry
BS 6200-6.2:1990. Sampling and analysis of iron, steel and other ferrous metals. Guidelines on atomic absorption spectrometric techniquesRecommendations for the application of flame atomic absorption spectrometry in standard methods for the chemical analysis of iron and steel
BS 6201-1:1982, IEC 60384-1:1972. Fixed capacitors for use in electronic equipmentMethods of test
BS 6201-2:1982, IEC 60384-9:1979. Fixed capacitors for use in electronic equipment.Specification for fixed capacitors of ceramic dielectric, Class 2. Selection of methods of test and general requirements
BS 6201-3:1982, IEC 60384-14:1981. Fixed capacitors for use in electronic equipmentSpecification for fixed capacitors for radio interference suppression. Selection of methods of test and general requirements
BS 6202:1982, ISO 3649-1980. Glossary of terms for cleaning equipment for air or other gases
BS 6203:1982. Guide to fire characteristics and fire performance of expanded polystyrene (EPS) used in building applications
BS 6203:1991. Guide to fire characteristics and fire performance of expanded polystyrene materials used in building applications
BS 6203:2003. Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
BS 6204:1982. Specification for safety of data processing equipment
BS 6205:1981. Specification for dehydrated onion
BS 6206:1981. Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings
BS 6207:1987. Specification for mineral-insulated copper-sheathed cables with copper conductors
BS 6207:1991. Specification for mineral-insulated copper-sheathed cables with copper conductors
BS 6207-1:1969. Specification for mineral-insulated cables.Copper-sheathed cables with copper conductors
BS 6207-1:1995. Mineral insulated cables with a rated voltage not exceeding 750 VCables
BS 6207-2:1973. Specification for mineral-insulated cables.Aluminium-sheathed cables with copper conductors and aluminium-sheathed cables with aluminium conductors
BS 6207-2:1995. Mineral insulated cables with a rated voltage not exceeding 750 VTerminations
BS 6207-3:2001. Mineral insulated cables with a rated voltage not exceeding 750 VGuide to use
BS 6208:1982. Methods for ultrasonic testing and for specifying quality levels of ferritic steel castings
BS 6208:1990. Method for ultrasonic testing of ferritic steel castings including quality levels
BS 6209:1982. Specification for solvent cement for non-pressure thermoplastics pipe systems
BS 6210:1983. Code of practice for the safe use of wire rope slings for general lifting purposes
BS 6211:1982, ISO 7095-1982. Specification for operator's controls for earth-moving machinery: crawler tractors and crawler loaders
BS 6212:1981, ISO 3271-1975. Method for determination of tumbler strength of iron ores
BS 6212:1987, ISO 3271-1985. Method for determination of tumbler strength of iron ores
BS 6213:1982. Guide to selection of constructional sealants
BS 6213:2000+A1:2010. Selection of construction sealants. Guide
BS 6214:1982. Specification for jointing materials for plasterboard
BS 6215-1:1981, ISO 5498-1981. Methods of test for agricultural food productsDetermination of crude fibre content (general method)
BS 6215-2:1981, ISO 6541-1981. Methods of test for agricultural food productsDetermination of crude fibre content (modified Scharrer method)
BS 6217:1981, IEC 60417:1973. Guide to graphical symbols for use on electrical equipment
BS 6219:1981, ISO 5223-1981. Specification for test sieves for cereals
BS 6219:1988, ISO 5223-1983. Specification for test sieves for cereals
BS 6219:1996, ISO 5223:1995. Test sieves for cereals
BS 622:1967. Specification for potassium and sodium cyanides for electroplating
BS 6220:1983. Specification for junction boxes for use in electrical installations with rated voltages not exceeding 250 V
BS 6221-1:1990, IEC 60326-1:1984. Printed wiring boards.Guide for the specification writer
BS 6221-10:1991, IEC 60326-10:1991. Printed wiring boards.Specification for flex-rigid double-sided printed boards with through connections
BS 6221-11:1991, IEC 60326-11:1991. Printed wiring boards.Specification for flex-rigid multilayer printed boards with through connections
BS 6221-12:1992, IEC 60326-12:1992. Printed wiring boards.Specification for mass lamination panels (semi-manufactured multilayer printed boards)
BS 6221-2:1982. Printed wiring boards.Methods of test
BS 6221-2:1991, IEC 60326-2:1990. Printed wiring boards.Methods of test
BS 6221-20:1984. Printed wiring boards.Guide for the assembly of printed wiring boards
BS 6221-21:1984. Printed wiring boardsGuide for the repair of printed wiring boards
BS 6221-21:2001. Printed wiring boardsGuide to the rework of unassembled boards
BS 6221-22:1990. Printed wiring boards.Guide to the use of printed wiring board substrate materials: surface mount technology
BS 6221-23:1991. Printed wiring boardsGuide for the design and use of printed wiring boards: surface mounted devices
BS 6221-24:1992, IEC 60321-3:1990. Printed wiring boards.Guide for the production of artwork
BS 6221-25:2000. Printed wiring boardsGuide to the rework and repair of soldered surface mounted printed board assemblies
BS 6221-3:1984. Printed wiring boards.Guide for the design and use of printed wiring boards
BS 6221-3:1991, IEC 60326-3:1991. Printed wiring boards.Guide for the design and use of printed wiring boards
BS 6221-4:1982, IEC 60326-4:1980. Printed wiring boards.Method for specifying single and double sided printed wiring boards with plain holes
BS 6221-5:1982, IEC 60326-5:1980. Printed wiring boardsSpecification for single and double sided rigid printed boards with plated-through holes
BS 6221-6:1982, IEC 60326-6:1980. Printed wiring boardsSpecification for multilayer printed wiring boards
BS 6221-7:1982, IEC 60326-7:1981. Printed wiring boards.Method for specifying single and double sided flexible printed wiring boards without through connections
BS 6221-8:1982, IEC 60326-8:1981. Printed wiring boards.Method for specifying single and double sided flexible printed wiring boards with through connections
BS 6221-9:1991, IEC 60326-9:1991. Printed wiring boardsSpecification for flexible multilayer boards with through connections
BS 6222-1:1982. Domestic kitchen equipmentSpecification for co-ordinating dimensions
BS 6222-2:1992. Domestic kitchen equipmentSpecification for strength requirements and methods of test for fitted kitchen units
BS 6222-2:1997. Domestic kitchen equipmentSpecification for structural performance requirements and methods of test for fitted kitchen units
BS 6222-2:2009. Domestic kitchen equipmentFitted kitchen units, peninsular units, island units and breakfast bars. Performance requirements and test methods
BS 6222-3:1988. Domestic kitchen equipmentSpecification for performance requirements for durability of surface finish
BS 6222-3:1993. Domestic kitchen equipmentSpecification for performance requirements for durability of surface finish and adhesion of surfacing and edging materials
BS 6222-3:1999. Domestic kitchen equipmentPerformance requirements for durability of surface finish and adhesion of surfacing and edging materials. Specification
BS 6222-4:1988. Domestic kitchen equipmentCode of practice for protection, storage and installation of fitted kitchen units
BS 6222-5:1995. Domestic kitchen equipmentSpecification for strength requirements and methods of test for peninsular units, island units and breakfast bars
BS 6223:1982. Specification for friction welding of butt joints in metals for high duty applications
BS 6223:1990. Specification for friction welding of joints in metals
BS 6224:1982. Guide to design structure diagrams for use in program design and other logic applications
BS 6224:1987. Guide to design structure diagrams for use in program design and other logic applications
BS 6225-1:1982, ISO 3782-1980. Method for determining the resistance to picking of paper and board: accelerating speed method using the IGT testerPendulum or spring model
BS 6225-2:1982, ISO 3783-1980. Method for determining the resistance to picking of paper and board: accelerating speed method using the IGT testerElectric model
BS 6226:1982, EN 50032:1980. Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Definitions, classification and designation
BS 6227:1982, EN 50040. Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for direct current, 2 terminals
BS 6227:1988, EN 50040:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for direct current, 2 terminals
BS 6228:1985, ISO 6750-1984. Guide to format and content of manuals on operation and maintenance for earth-moving machinery
BS 6229:1982. Code of practice for flat roofs with continuously supported coverings
BS 6229:2003. Flat roofs with continuously supported coverings. Code of practice
BS 623:1940. Specification for colours for signal glasses for railway purposes
BS 6230:1982. Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating of rated input exceeding 60 kW (2nd family gases)
BS 6230:1991. Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd family gases)
BS 6230:2005. Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases)
BS 6230:2011. Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases)
BS 6231:1981. Specification for PVC-insulated cables for switchgear and controlgear wiring
BS 6231:1990. Specification for PVC-insulated cables for switchgear and controlgear wiring
BS 6231:1998. Specification for PVC-insulated cables for switchgear and controlgear wiring
BS 6231:2006. Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring
BS 6232-1:1982. Thermal insulation of cavity walls by filling with blown man-made mineral fibreSpecification for the performance of installation systems
BS 6232-2:1982. Thermal insulation of cavity walls by filling with blown man-made mineral fibreCode of practice for installation of blown man-made mineral fibre in cavity walls with masonry and/or concrete leaves
BS 6233:1982, IEC 60093:1980. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
BS 6234:1969. Specification for polythene insulation and sheath of electric cables
BS 6234:1987. Specification for polyethylene insulation and sheath of electric cables
BS 6235:1982. Code of practice for fixed offshore structures
BS 6236-1:1982, IEC 60371-1:1980. Electrical insulating materials based on micaSpecification for general requirements
BS 6236-2:1988, IEC 60371-2:1987. Electrical insulating materials based on micaMethods of test
BS 6237:1982, ISO 6386-1981. Method for grading and visual classification for muscovite mica splittings
BS 6238:1982. Code of practice for performance monitoring of computer-based systems
BS 6239:1990, EN 117:1989. Wood preservatives. Determination of toxic values against Reticulitermes santonenis de Feytaud (Laboratory method)
BS 6240:1990, EN 118:1990. Wood preservatives. Determination of preventive action against Reticulitermes santonensis de Feytaud (laboratory method)
BS 6241:1982. Specification for dimensions of housings for hydraulic seals incorporating bearing rings for reciprocating applications
BS 6242:1982. Specification for single use unlabelled medical specimen containers for haematology and biochemistry
BS 6243:1982. Method for determination of the specific strength factor of textile machinery hollow section guide rollers
BS 6244:1982, ISO 5388-1981. Code of practice for stationary air compressors
BS 6245-1:1982, ISO 4874-1981. Sampling tobacco and tobacco productsMethod of sampling batches of raw material (general principles)
BS 6245-1:2001, ISO 4874:2000. Sampling tobacco and tobacco productsMethod of sampling batches of raw material (general principles)
BS 6245-2:1983. Sampling tobacco and tobacco productsMethod of preparing samples for collaborative studies
BS 6245-3:1989, ISO 8243:1988. Sampling tobacco and tobacco products.Methods of sampling cigarettes
BS 6245-3:1992, ISO 8243:1991. Sampling tobacco and tobacco productsMethods of sampling cigarettes
BS 6246-1:1987. Industrial laundry machineryMethods for the assessment of the effect of rotary washing machines on textiles
BS 6246-2:1983. Industrial laundry machineryMethods for the assessment of the effect of extracting machines on textiles
BS 6246-3:1985. Industrial laundry machineryMethods for the assessment of the effect of flatwork ironing machines on textiles
BS 6246-4:1983. Industrial laundry machineryMethods for the assessment of the effect of batch drying tumblers on textiles
BS 6246-5:1991. Industrial laundry machineryMethods for the assessment of the effect of shaped garment finishing machinery on textiles
BS 6247:1982, ISO 6343-1980. Method of test for adhesion of aperture-card protection sheets
BS 6248-1:1982. Caseins and caseinatesGeneral introduction, including preparation of laboratory samples
BS 6248-10:1986, ISO 5543-1986. Caseins and caseinatesMethod for determination of fat (gravimetric reference method)
BS 6248-11:1987, ISO 8195:1987. Caseins and caseinatesMethod for determination of nitrate and nitrite contents
BS 6248-2:1982. Caseins and caseinatesMethod for determination of 'fixed ash' of caseins (reference method)
BS 6248-3:1982, ISO 5545-1978. Caseins and caseinatesMethod for determination of ash of rennet caseins and caseinates (reference method)
BS 6248-4:1982, ISO 5546-1979. Caseins and caseinatesMethod for determination of pH (reference method)
BS 6248-5:1982, ISO 5547-1978. Caseins and caseinatesMethod for determination of free acidity of caseins (reference method)
BS 6248-6:1982. Caseins and caseinatesMethod for determination of lactose content (photometric method)
BS 6248-7:1982, ISO 5549-1978. Caseins and caseinatesMethod for determination of protein content (reference method)
BS 6248-8:1982, ISO 5550-1978. Caseins and caseinatesMethod for determination of water content (reference method)
BS 6248-9:1984, ISO 5739-1983. Caseins and caseinatesMethod for the determination of scorched particles
BS 6249-1:1982. Materials and material assemblies used in clothing for protection against heat and flameSpecification for flammability testing and performance
BS 6250-1:1982. Domestic and contract furnitureSpecification for performance requirements for seating
BS 6250-2:1985. Domestic and contract furniture.Specification for performance requirements for tables and trolleys
BS 6250-2:1991. Domestic and contract furnitureSpecification for performance requirements for tables and trolleys
BS 6250-3:1983. Domestic and contract furniture.Specification for performance requirements for cabinet furniture
BS 6250-3:1991. Domestic and contract furnitureSpecification for performance requirements for cabinet furniture
BS 6250-4:1985. Domestic and contract furniture.Guide to the provision of information
BS 6250-4:1992. Domestic and contract furnitureGuide to the provision of information
BS 6251:1982, IEC 60572:1977. Method for determining the luminance distribution of electro-optical X-ray image intensifiers
BS 6252:1982, IEC 60573:1977. Method for measuring the conversion factor of electro-optical X-ray image intensifiers
BS 6253-1:1982, IEC 60688-1:1980. Electrical measuring transducers for converting a.c. electrical quantities into d.c. electrical quantities.Method for specifying general purpose transducers
BS 6253-2:1989, IEC 60688-2:1988. Electrical measuring transducers for converting a.c. electrical quantities into d.c. electrical quantities.Method for specifying transducers for outdoor use and other severe environments
BS 6254:1982. Specification for creped sterilization paper for medical use
BS 6254:1989. Specification for creped sterilization paper for medical use
BS 6255:1982. Specification for plain sterilization paper for medical use
BS 6255:1989. Specification for plain sterilization paper for medical use
BS 6256:1982. Specification for paper for steam sterilization paper bags for medical use
BS 6256:1989. Specification for paper for steam sterilization paper bags, pouches and reels for medical use
BS 6257:1982. Specification for paper bags for steam sterilization for medical use
BS 6257:1989. Specification for paper bags for steam sterilization for medical use
BS 6258:1982. Specification for hollow steel bars for machining
BS 6258:1988. Specification for hollow steel bars for machining
BS 6259:1982. Code of practice for planning and installation of sound systems
BS 6259:1997. Code of practice for the design, planning, installation, testing and maintenance of sound systems
BS 6260:1982. Specification for open nickel-cadmium prismatic rechargeable single cells
BS 6261:1982. Method for evaluating the application of and interaction between components in upholstered furniture
BS 6262:1982. Code of practice for glazing for buildings
BS 6262-1:2005. Glazing for buildingsGeneral methodology for the selection of glazing
BS 6262-2:2005. Glazing for buildingsCode of practice for energy, light and sound
BS 6262-3:2005. Glazing for buildingsCode of practice for fire, security and wind loading
BS 6262-4:1994. Glazing for buildingsSafety related to human impact
BS 6262-4:2005. Glazing for buildingsCode of practice for safety related to human impact
BS 6262-6:2005. Glazing for buildingsCode of practice for special applications
BS 6262-7:2005. Glazing for buildingsCode of practice for the provision of information
BS 6263-2:1982. Code of practice for care and maintenance of floor surfaces.Sheet and tile flooring
BS 6263-2:1991. Care and maintenance of floor surfacesCode of practice for resilient sheet and tile flooring
BS 6264:1982, ISO 7130-1981. Guide to procedure for operator training for earth-moving machinery
BS 6265:1982. Specification for resistance seam welding of uncoated and coated low carbon steel
BS 6266:1982. Code of practice for fire protection for electronic data processing installations
BS 6266:1992. Code of practice for fire protection for electronic data processing installations
BS 6266:2002. Code of practice for fire protection for electronic equipment installations
BS 6266:2011. Fire protection for electronic equipment installations. Code of practice
BS 6267:1982, ISO 15-1981. Specification for rolling bearings: boundary dimensions for radial bearings
BS 6268:1982, ISO 6544-1981. Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners
BS 627:1982. Methods for sampling animal and vegetable fats and oils
BS 6270-1:1982. Code of practice for cleaning and surface repair of buildingsNatural stone, cast stone and clay and calcium silicate brick masonry
BS 6270-2:1985. Code of practice for cleaning and surface repair of buildingsConcrete and precast concrete masonry
BS 6270-3:1991. Code of practice for cleaning and surface repair of buildingsMetals (cleaning only)
BS 6271:1982. Specification for miniature hacksaw blades
BS 6272:1982, EN 50042:1980. Specification for low voltage switchgear and controlgear for industrial use. Terminal marking. Terminals for external associated electronic circuit components and contacts
BS 6273:1982, EN 50045:1980. Specification for low voltage switchgear and controlgear for industrial use. Mounting rails. Top hat rails, 15 mm wide for the fixing of terminal blocks
BS 6274:1982, IEC 60682:1980. Method for measurement of the pinch temperature of quartz-tungsten-halogen lamps
BS 6275-1:1982, ISO 4572-1981. Hydraulic fluid power filter elementsMethod of evaluating filtration performance (multi-pass method)
BS 6275-2:1984. Hydraulic fluid power filter elementsMethods of test to verify structural integrity
BS 6275-3:1988. Hydraulic fluid power filter elements.Specification for marking
BS 6276:1982. Specification for dimensions and identification code for mounting flanges and shaft ends for hydraulic fluid power pumps and motors
BS 6276:1987. Specification for dimensions and identification code for mounting flanges and shafts ends for hydraulic fluid power pumps and motors
BS 6277:1982, ISO 3968-1981. Method for determination of pressure drop/flow characteristics of hydraulic fluid power filters
BS 6278:1982, ISO 5238-1:1982. Glossary of terms for packages of yarns and intermediate textile products
BS 6279-1:1982, ISO 6322/1-1981. Storage of cereals and pulsesGuide to particular problems encountered in the storage of cereals and pulses
BS 6279-2:1982, ISO 6322/2-1981. Storage of cereals and pulsesCode of practice for the storage of cereals and pulses
BS 6279-2:2001, ISO 6322-2:2000. Storage of cereals and pulsesPractical recommendations
BS 6279-3:1982, ISO 6322/3-1981. Storage of cereals and pulses.Guide to control of attack by vertebrate and invertebrate animals
BS 6279-3:1990, ISO 6322-3:1989. Storage of cereals and pulses.Guide to control of attack by pests
BS 628:1967. Specification for crude coconut oil
BS 6280:1982. Method of vacuum (backsiphonage) test for water-using appliances
BS 6281-1:1982. Devices without moving parts for the prevention of contamination of water by backflow.Specification for type A air gaps
BS 6281-1:1992. Devices without moving parts for the prevention of contamination of water by backflowSpecification for type A air gaps
BS 6281-2:1982. Devices without moving parts for the prevention of contamination of water by backflowSpecification for type B air gaps
BS 6281-3:1982. Devices without moving parts for the prevention of contamination of water by backflowSpecification for pipe interrupters of nominal size up to and including DN 42
BS 6282-1:1982. Devices with moving parts for the prevention of contamination of water by backflowSpecification for check valves of nominal size up to and including DN 54
BS 6282-2:1982. Devices with moving parts for the prevention of contamination of water by backflowSpecification for terminal anti-vacuum valves of nominal size up to and including DN 54
BS 6282-3:1982. Devices with moving parts for the prevention of contamination of water by backflowSpecification for in-line anti-vacuum valves of nominal size up to and including DN 42
BS 6282-4:1982. Devices with moving parts for the prevention of contamination of water by backflowSpecification for combined check and anti-vacuum valves of nominal size up to and including DN 42
BS 6283-1:1982. Safety devices for use in hot water systems.Specification for expansion valves for pressures up to and including 10 bar
BS 6283-1:1991. Safety and control devices for use in hot water systemsSpecification for expansion valves for pressures up to and including 10 bar
BS 6283-2:1982. Safety devices for use in hot water systems.Specification for temperature relief valves for pressures up to and including 10 bar
BS 6283-2:1991. Safety and control devices for use in hot water systemsSpecifications for temperature relief valves for pressures from 1 bar to 10 bar
BS 6283-3:1982. Safety devices for use in hot water systems.Specification for combined temperature and pressure relief valves for pressures up to and including 10 bar
BS 6283-3:1991. Safety and control devices for use in hot water systemsSpecification for combined temperature and pressure relief valves for pressures from 1 bar to 10 bar
BS 6283-4:1982. Safety devices for use in hot water systems.Specification for drop-tight pressure reducing valves of nominal size up to and including DN 54 for supply pressures up to and including 12 bar
BS 6283-4:1991. Safety and control devices for use in hot water systemsSpecification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar
BS 6284:1983. Specification for thermostatic radiator valves
BS 6285:1982, ISO 4968-1979. Method for the macrographic examination of steel by sulphur print (Baumann method)
BS 6286:1982, ISO 4970-1979. Methods of measurement of total or effective thickness of thin surface-hardened layers in steel
BS 6287:1982. Code of practice for safe operation of traction batteries
BS 6288-1:1982, IEC 60094-1:1981. Magnetic tape sound recording and reproducing systems.Specification for general conditions and requirements
BS 6288-10:1989, IEC 60094-10:1988. Magnetic tape sound recording and reproducing systemsSpecification for time and address codes
BS 6288-11:1989, IEC 60094-11:1988. Magnetic tape sound recording and reproducing systemsGuide to an address code for compact cassettes
BS 6288-2:1982, IEC 60094-2:1975. Magnetic tape sound recording and reproducing systems.Specification for calibration tapes
BS 6288-3:1982, IEC 60094-3:1979. Magnetic tape sound recording and reproducing systems.Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
BS 6288-6:1987, IEC 60094-6:1985. Magnetic tape sound recording and reproducing systems.Specification for reel-to-reel systems
BS 6288-7:1987, IEC 60094-7:1986. Magnetic tape sound recording and reproducing systems.Specification for cassettes for commercial tape records and domestic use
BS 6288-8:1989, IEC 60094-8:1987. Magnetic tape sound recording and reproducing systemsSpecification for eight-track magnetic tape cartridge for commercial tape records and domestic use
BS 6288-9:1989, IEC 60094-9:1988. Magnetic tape sound recording and reproducing systemsSpecification for magnetic tape cartridge for professional use
BS 6289-1:1982. Work platforms.Code of practice for mobile scissor operated work platforms
BS 629:1967. Specification for crude groundnut oil (arachis oil)
BS 6290-1:1983. Lead-acid stationary cells and batteriesSpecification for general requirements
BS 6290-2:1984. Lead-acid stationary cells and batteriesSpecification for lead-acid high performance Planté positive type
BS 6290-2:1999. Lead-acid stationary cells and batteriesSpecification for the high-performance Plante positive type
BS 6290-3:1986. Lead-acid stationary cells and batteriesSpecification for lead-acid pasted positive plate type
BS 6290-3:1999. Lead-acid stationary cells and batteriesSpecification for the flat positive plate type
BS 6290-4:1987. Lead-acid stationary cells and batteriesSpecification for lead-acid valve regulated sealed type
BS 6290-4:1997. Lead-acid stationary cells and batteriesSpecification for classifying valve regulated types
BS 6291:1983. Specification for household refrigerator/freezers: type I
BS 6292:1982, ISO 5393-1981. Method for evaluation of performance of rotary pneumatic assembly tools for threaded fasteners
BS 6293-1:1982, ISO 5855/1-1981. MJ threads for aerospace construction.Specification for dimensions of basic profile
BS 6293-1:1994, ISO 5855-1:1988. Aerospace. MJ threadsGeneral requirements
BS 6293-2:1982, ISO 5855/2-1981. MJ threads for aerospace construction.Specification for dimensions for bolts and nuts
BS 6293-2:1994, ISO 5855-2:1988. Aerospace. MJ threadsLimit dimensions for bolts and nuts
BS 6293-3:1994, ISO 5855-3:1988. Aerospace. MJ threadsLimit dimensions for fittings for fluid systems
BS 6294:1982, ISO 7096-1982. Method for measurement of body vibration transmitted to the operator of earth-moving machinery
BS 6295-1:1982, ISO 6746/1-1982. Dimensions and symbols for earth-moving machinery.Glossary of terms for base machine
BS 6295-2:1982, ISO 6746/2-1982. Dimensions and symbols for earth-moving machinery.Glossary of terms for equipment
BS 6296:1982, ISO 6747-1982. Glossary of terms for self-propelled crawler and wheel tractors and their equipment used for earth-moving
BS 6297:1983. Code of practice for design and installation of small sewage treatment works and cesspools
BS 6297:2007+A1:2008. Code of practice for the design and installation of drainage fields for use in wastewater treatment
BS 6298:1982, ISO 6644-1981. Methods for automatic sampling of cereals and milled cereal products by mechanical means
BS 6299:1982, CISPR 17:1981. Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
BS 6300:1982, ISO 6016-1982. Methods of measuring the masses of whole machines, their equipment and components of earth-moving machinery
BS 6301:1982. Specification for safety requirements for apparatus for connection to British Telecommunications networks
BS 6301:1987. Specification for electrical safety requirements for apparatus for connection to certain telecommunication networks
BS 6301:1989. Specification for electrical safety requirements for apparatus for connection to telecommunication networks
BS 6302:1982, ISO 1237-1981. Specification for mustard seed
BS 6303:1982, IEC 60717:1981. Method for determination of the space required by capacitors and resistors with unidirectional terminations
BS 6304:1982, ISO 4778:1981. Specification for chain slings of welded construction: grades M(4), S(6) and T(8)
BS 6305:1982. Specification for general requirements for apparatus for connection to the British Telecommunications public switched telephone network
BS 6305:1992. Specification for general requirements for apparatus for connection to public switched telephone networks run by certain public telecommunication operators
BS 6306-1:1982, ISO 5351-1:1981. Methods for determination of limiting viscosity number of cellulose in dilute solutionsCupri-ethylene-diamine (CED) method
BS 6307:1982, ISO 6925-1982. Method for determination of the effects of a small source of ignition on textile floor coverings (methenamine tablet test)
BS 6308:1982. Specification for men's uniforms
BS 6309:1982, ISO 6405-1982. Specification for symbols for operator controls and for controls other than operator controls for use on earth-moving machinery
BS 63-1:1951. Specification for single-sized roadstone and chippings.Imperial units
BS 631:1967. Specification for crude rape seed oil
BS 63-1:1987. Road aggregatesSpecification for single-sized aggregate for general purposes
BS 6310:1982, IEC 60711:1981. Specification for occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts
BS 6311:1982, IEC 60698:1981. Methods for measuring television tape machine parameters
BS 6312:1982. Specification for plugs for use with British Telecommunications line jack units
BS 6312:1985. Specification for plugs for use with British Telecommunications line jack units
BS 6312-1:1994. Connectors for analogue telecommunication interfacesSpecification for plugs
BS 6312-2.1:1994. Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS 6312- 1Specification for sockets. General requirements
BS 6312-2.2:1997. Connectors for analogue telecommunication interfacesSockets for use with plugs specified in BS 6312-1
BS 6313:1982. Specification for 35 mm microcopying of serials
BS 6313:2003. Micrographics. 35 mm microfilming of serials. Specification
BS 6314:1983. Specification for sterile, single use, fine-bore naso-enteric tubes, introducers, giving sets and nutrient containers for continuous feeding
BS 6314:1990. Specification for sterile, single-use, naso-enteric feeding tubes and ancillary equipment
BS 6315:1982. Methods for sampling and sample preparation of raw rubber
BS 6315:1993, ISO 1795:1992. Methods for sampling and further preparative procedures for raw, natural and synthetic rubber
BS 6316:1983. Code of practice for test pumping water wells
BS 6316:1992. Code of Practice for test pumping of water wells
BS 6317:1982. Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunication operators
BS 6317:1992. Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunications operators
BS 6318-1:1982, ISO 7190-1981. Bucket elevatorsClassification of bucket elevators
BS 6318-2:1982, ISO 5050-1981. Bucket elevatorsSpecification for dimensions of vertical bucket elevators with calibrated round steel link chains
BS 6318-3:1982, ISO 5051-1981. Bucket elevatorsSpecification for dimensions of deep elevator bucket with flat rear wall
BS 6319-1:1983. Testing of resin and polymer/cement compositions for use in constructionMethod for preparation of test specimens
BS 6319-10:1987. Testing of resin and polymer/cement compositions for use in constructionMethod for measurement of temperature of deflection under a bending stress
BS 6319-11:1993. Testing of resin and polymer/cement compositions for use in constructionMethods for determination of creep in compression and in tension
BS 6319-12:1992. Testing of resin and polymer/cement compositions for use in constructionMethods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion
BS 6319-2:1983. Testing of resin and polymer/cement compositions for use in constructionMethod for measurement of compressive strength
BS 6319-3:1983. Testing of resin compositions for use in construction.Method for measurement of flexural strength
BS 6319-3:1990. Testing of resin and polymer/cement compositions for use in constructionMethods for measurement of modulus of elasticity in flexure and flexural strength
BS 6319-4:1984. Testing of resin and polymer/cement compositions for use in constructionMethod for measurement of bond strength (slant shear method)
BS 6319-5:1984. Testing of resin and polymer/cement compositions for use in constructionMethods for determination of density of hardened resin compositions
BS 6319-6:1984. Testing of resin and polymer/cement compositions for use in constructionMethod for determination of modulus of elasticity in compression
BS 6319-7:1985. Testing of resin and polymer/cement compositions for use in constructionMethod for measurement of tensile strength
BS 6319-8:1984. Testing of resin and polymer/cement compositions for use in constructionMethod for the assessment of resistance to liquids
BS 6319-9:1987. Testing of resin and polymer/cement compositions for use in constructionMethod for measurement and classification of peak exotherm temperature
BS 63-2:1971. Road aggregatesMetric units
BS 63-2:1987. Road aggregatesSpecification for single-sized aggregate for surface dressing
BS 6320:1982. Specification for modems for connection to the British Telecommunications public switched telephone network
BS 6320:1992. Specification for modems for connection to public switched telephone networks and speech band private circuits run by certain public telecommunications operators
BS 6321:1982. Specification for authorized signature lists and their representation on microfiche in bank operations
BS 6322-1:1982, ISO 4759/1-1978. Tolerances for fastenersSpecification for tolerances of bolts, screws and nuts with thread diameters ≥ 1.6 mm and ≤ 150 mm and product grades A, B and C
BS 6322-2:1982, ISO 4759/2-1979. Tolerances for fastenersSpecification for tolerances of bolts, screws and nuts with thread diameters from 1 mm up to 3 mm and product grade F, for fine mechanics
BS 6322-3:1982, ISO 4759/3-1977. Tolerances for fasteners.Specification for tolerances of washers for metric bolts, screws and nuts with thread diameters from 1 mm up to and including 150 mm. Product grades A and C
BS 6322-3:1992, ISO 4759-3:1991. Tolerances for fastenersSpecification for tolerances of plain washers for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm. Product grades A and C
BS 6323-1:1982. Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposesGeneral requirements
BS 6323-2:1982. Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposesSpecific requirements for hot finished welded steel tubes
BS 6323-3:1982. Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposesSpecific requirements for hot finished seamless steel tubes
BS 6323-4:1982. Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposesSpecific requirements for cold finished seamless steel tubes
BS 6323-5:1982. Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposesSpecific requirements for electric resistance welded (including induction welded) steel tubes
BS 6323-6:1982. Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposesSpecific requirements for cold finished electric resistance welded (including induction welded) steel tubes
BS 6323-7:1982. Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposesSpecific requirements for submerged arc welded steel tubes
BS 6323-8:1982. Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposesSpecific requirements for longitudinally welded stainless steel tubes
BS 6324-1:1983. Terms relating to surgical implantsGlossary of general medical terms
BS 6324-2:1983. Terms relating to surgical implantsGlossary of terms relating to mechanics
BS 6324-3:1983. Terms relating to surgical implantsGlossary of terms relating to materials
BS 6324-4:1983. Terms relating to surgical implantsGlossary of orthopaedic surgical terms
BS 6324-5:1990, ISO TR 9586:1988. Terms relating to surgical implantsGuidance on the usage of the terms 'valgus' and 'varus' in orthopaedic surgery
BS 6325:1982, ISO 6078-1982. Glossary of terms relating to black tea
BS 6326:1982, ISO 6538-1982. Specification for cassia (whole or ground)
BS 6327:1982, ISO 6826:1982. Specification for fire protection of reciprocating internal combustion engines
BS 6328-1:1985. Apparatus for connection to private circuits run by certain public telecommunication operatorsSpecification for apparatus for connection to speechband circuits
BS 6328-2:1985. Apparatus for connection to private circuits run by certain public telecommunication operatorsSpecification for apparatus for connection to baseband circuits
BS 6328-3:1983. Apparatus for connection to private circuits run by certain public telecommunication operatorsSpecification for apparatus for connection to direct current circuits
BS 6328-4:1985. Apparatus for connection to private circuits run by certain public telecommunication operatorsSpecification for apparatus for connection to telegraph circuits using SCVF signalling
BS 6328-5:1984. Apparatus for connection to private circuits run by certain public telecommunication operatorsSpecification for apparatus for connection to wideband (FDM) circuits
BS 6328-7:1990. Apparatus for connection to private circuits run by certain public telecommunication operators.Specification for apparatus for connection to digital circuits according to CCITT Recommendation X.21 bis
BS 6328-7:1993. Apparatus for connection to private circuits run by certain public telecommunication operatorsSpecification for apparatus for connection to digital circuits according to CCITT Recommendation X.21 bis
BS 6328-8.1:1993. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series RecommendationsG.703 services at 2048 kbit/s and 8448 kbit/s
BS 6328-8.1:2000. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series RecommendationsSection 8.1: G.703 services at 2 048 kbits/s and 8 448 kbits/s
BS 6328-8-8.1:1990. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series Recommendations.G.703 services at 2048 kbit/s and 8448 kbit/s
BS 6328-8-8.2:1990. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series. Recommendations.G.703 64 kbit/s service using codirectional option
BS 6328-8-8.2:1993. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series RecommendationsG.703 64 kbit/s service using codirectional option
BS 6329:1982, IEC 60714:1981. Method of expression of the properties of spectrum analyzers
BS 633:1970. Specification for cotton selvedge tapes and webbing for electrical purposes
BS 6330:1983. Code of practice for reception of sound and television broadcasting
BS 6331-1:1983. Mounting dimensions of single rod double acting hydraulic cylindersSpecification for 160 bar medium series
BS 6331-2:1983. Mounting dimensions of single rod double acting hydraulic cylindersSpecification for 160 bar compact series
BS 6331-3:1983. Mounting dimensions of single rod double acting hydraulic cylindersSpecification for 250 bar series
BS 6331-4:1985. Mounting dimensions of single rod double acting hydraulic cylinders.Specification for 63 bar series, including associated components
BS 6332-1:1983. Thermal performance of domestic gas appliances.Specification for thermal performance of central heating boilers and circulators
BS 6332-1:1988. Thermal performance of domestic gas appliancesSpecification for thermal performance of central heating boilers and circulators
BS 6332-2:1983. Thermal performance of domestic gas appliancesSpecification for thermal performance of gas fires
BS 6332-3:1984. Thermal performance of domestic gas appliancesSpecification for thermal performance of combined appliances: gas fire/back boiler
BS 6332-4:1983. Thermal performance of domestic gas appliancesSpecification for thermal performance of independent convector heaters
BS 6332-5:1986. Thermal performance of domestic gas appliancesSpecification for thermal performance of fanned-circulation ducted-air heaters
BS 6332-6:1990. Thermal performance of domestic gas appliancesSpecification for thermal performance of combined appliances: fanned-circulation ducted-air heater/circulator
BS 6333:1983. Specification for adjustable wrenches
BS 6333:1995, ISO 6787:1982. Specification for adjustable wrenches
BS 6334:1983, IEC 60707:1981. Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source
BS 6335-1:1983. Methods for determining pressure ripple levels generated in hydraulic fluid power systems and components.High impedance method for pumps
BS 6335-1:1990. Methods for determining pressure ripple levels generated in hydraulic fluid power systems and componentsSecondary source methods for pumps
BS 6336:1982. Guide to development and presentation of fire tests and their use in hazard assessment
BS 6336:1998. Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment
BS 6337-1:1983, ISO 6228-1980. General methods of chemical analysisMethod for determination of traces of sulphur compounds by reduction and titrimetry
BS 6337-2:1983, ISO 6382-1981. General methods of chemical analysisMethod for determination of silicon content (reduced molybdosilicate spectrophotometric method)
BS 6337-3:1983, ISO 6685-1982. General methods of chemical analysisMethod for determination of iron content (1,10-phenanthroline spectrophotometric method)
BS 6337-4:1984, ISO 6227-1982. General methods of chemical analysisMethod for determination of chloride ions by potentiometry
BS 6338:1982, ISO 4520-1981. Specification for chromate conversion coatings on electroplated zinc and cadmium coatings
BS 6339:1983, ISO 6580-1981. Specification for dimensions of circular flanges for general purpose industrial fans
BS 6340-1:1983. Shower unitsGuide on choice of shower units and their components for use in private dwellings
BS 6340-2:1983. Shower unitsSpecification for the installation of shower units
BS 6340-3:1985. Shower unitsSpecification for prefabricated shower enclosures and shower cabinets
BS 6340-4:1984. Shower unitsSpecification for shower heads and related equipment
BS 6340-5:1983. Shower unitsSpecification for prefabricated shower trays made from acrylic material
BS 6340-6:1983. Shower unitsSpecification for prefabricated shower trays made from porcelain enamelled cast iron
BS 6340-7:1983. Shower unitsSpecification for prefabricated shower trays made from vitreous enamelled sheet steel
BS 6340-8:1985. Shower unitsSpecification for prefabricated shower trays made from glazed ceramic
BS 6341:1983. Specification for fabrics for camping tents
BS 6342:1983. Specification for 105 mm microcopying of technical drawings (single image, A6 size)
BS 6343:1983, ISO 7129-1982. Specification for principal shapes and basic dimensions for cutting edges for tractors with dozer, graders and tractor scrapers
BS 6344-1:1984. Industrial hearing protectors.Specification for ear muffs
BS 6344-1:1989. Industrial hearing protectors.Specification for ear muffs
BS 6344-2:1988. Industrial hearing protectors.Specification for ear plugs
BS 6345:1983. Method for measurement of radio interference terminal voltage of lighting equipment
BS 6346:1969. Specification for PVC-insulated cables for electricity supply
BS 6346:1987. Specification for PVC-insulated cables for electricity supply
BS 6346:1989. Specification for PVC-insulated cables for electricity supply
BS 6346:1997. Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
BS 6347-1:1983, ISO 789-1:1981. Performance assessment of agricultural tractors.Methods for determination of available power
BS 6347-10:1997, ISO 789-10:1996. Performance assessment of agricultural tractorsMethod for determination of hydraulic power at tractor/implement interface
BS 6347-11:1997, ISO 789-11:1996. Performance assessment of agricultural tractorsMethod for the determination of the steering capability of wheeled tractors
BS 6347-2:1983, ISO 789-2:1983. Performance assessment of agricultural tractorsMethods for determination of hydraulic power and lifting capacity
BS 6347-3:1983, ISO 789-3:1982. Performance assessment of agricultural tractors.Method for determination of turning and clearance diameters
BS 6347-6:1983, ISO 789-6:1982. Performance assessment of agricultural tractorsMethod for determination of centre of gravity
BS 6347-7:1993, ISO 789-7:1991. Performance assessment of agricultural tractors.Method for determination of axle power
BS 6347-8:1993, ISO 789-8:1991. Performance assessment of agricultural tractors.Method of testing engine air cleaners
BS 6348:1983, IEC 60716:1981. Method for expression of the properties of signal generators
BS 6349-1:1984. Maritime structuresGeneral criteria
BS 6349-1:2000. Maritime structuresCode of practice for general criteria
BS 6349-1-1:2013. Maritime worksGeneral. Code of practice for planning and design for operations
BS 6349-1-3:2012. Maritime worksGeneral. Code of practice for geotechnical design
BS 6349-1-4:2013. Maritime worksGeneral. Code of practice for materials
BS 6349-2:1988. Maritime structuresDesign of quay walls, jetties and dolphins
BS 6349-2:2010. Maritime worksCode of practice for the design of quay walls, jetties and dolphins
BS 6349-3:1988. Maritime structuresDesign of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates
BS 6349-4:1985. Maritime structuresDesign of fendering and mooring systems
BS 6349-4:1994. Maritime structuresCode of practice for design of fendering and mooring systems
BS 6349-5:1991. Maritime structuresCode of practice for dredging and land reclamation
BS 6349-6:1989. Maritime structuresDesign of inshore moorings and floating structures
BS 6349-7:1991. Maritime structuresGuide to the design and construction of breakwaters
BS 6349-8:2007. Maritime structuresCode of practice for the design of Ro-Ro ramps, linkspans and walkways
BS 6350:1983. Specification for gas heated fish and chip frying ranges
BS 6351-1:1983. Electric surface heatingSpecification for electric surface heating devices
BS 6351-2:1983. Electric surface heatingGuide to the design of electric surface heating systems
BS 6351-3:1983. Electric surface heatingCode of practice for the installation, testing and maintenance of electric surface heating systems
BS 6352:1983, ISO 4797-1981. Specification for flasks with ground glass joints
BS 6353:1983. Specification for underground loudspeaker communication systems in coal mines
BS 6354:1983. Method for measuring the screen luminance, contrast and reflectance of microform readers
BS 6355:1983, ISO 5681:1981. Glossary of terms for equipment for crop protection
BS 6356-1:1983, ISO 5682-1:1981. Spraying equipment for crop protectionMethod of test for sprayer nozzles
BS 6356-1:1997, ISO 5682-1:1996. Spraying equipment for crop protectionMethod of test for sprayer nozzles
BS 6356-10:1997, ISO 5682-3:1996. Spraying equipment for crop protectionTest method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
BS 6356-11:1997, ISO 13440:1996. Spraying equipment for crop protectionAgricultural sprayers. Determination of the volume of total residual
BS 6356-12:1997, ISO 10625:1996. Spraying equipment for crop protectionSprayer nozzles. Colour coding for identification
BS 6356-13:1997, ISO 14710:1996. Spraying equipment for crop protectionAir-assisted sprayers. Dimensions of nozzle swivel nuts
BS 6356-14:1997, ISO 5682-2:1997. Spraying equipment for crop protectionTest methods for hydraulic sprayers
BS 6356-15:1997, ISO 13441-1:1997. Spraying equipment for crop protectionTypical layout
BS 6356-16:1997, ISO 13441-2:1997. Spraying equipment for crop protectionTechnical specifications related to components
BS 6356-2:1985, ISO 8169-1984. Spraying equipment for crop protection.Specification for connecting dimensions for nozzles and manometers
BS 6356-3:1985, ISO 4102-1984. Spraying equipment for crop protection.Specification for dimensions of connection threading
BS 6356-4:1989. Spraying equipment for crop protectionSpecification for performance limits for field spraying nozzles
BS 6356-5:1992, ISO 9357:1990. Spraying equipment for crop protection.Specification for tank nominal volume and filling hole diameter
BS 6356-6:1992, ISO 10626:1991. Spraying equipment for crop protection.Specification for connecting dimensions for nozzles with bayonet fixing
BS 6356-7:1993. Spraying equipment for crop protection.Guide for typical data sheet layout
BS 6356-8:1996. Spraying equipment for crop protectionSpecification for induction hoppers
BS 6356-9:1996. Spraying equipment for crop protectionSpecification for systems for closed transfer of liquid formulations
BS 6357:1983. Method for assessment of resistance of materials used in protective clothing to molten metal splash
BS 6358:1983, ISO 5799:1981. Method for determination of ISO speed and average gradient of direct-exposure medical and dental radiographic film/process combinations
BS 6359:1983. Specification for dimensions and position of microfiche heading coating (colour stripe)
BS 6360:1981. Specification for conductors in insulated cables and cords
BS 6360:1991. Specification for conductors in insulated cables and cords
BS 6361:1983, ISO 4400-1980. Specification for three-pin plug connectors for electrically controlled fluid power equipment
BS 6361:1988. Specification for three-pin plug connectors for electrically controlled fluid power equipment
BS 6362:1984. Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads'
BS 6362:1990, ISO 7598:1988. Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads'
BS 6363:1983. Specification for welded cold formed steel structural hollow sections
BS 6364:1984. Specification for valves for cryogenic service
BS 6365:1983. Specification for precision vernier depth gauges
BS 6365:2008. Specification for precision vernier depth gauges
BS 6366:1983. Specification for studs for rugby football boots
BS 6366:2011. Specification for studs for rugby football boots
BS 6367:1983. Code of practice for drainage of roofs and paved areas
BS 6368:1983, IEC 60701:1981. Specification for axial lead cores made of magnetic oxides or iron powder
BS 6369:1983. Specification for battery-operated electric fence controllers suitable for connection to the supply mains
BS 6370:1983, IEC 60712:1982. Specification for helical-scan video-tape cassette system using 19 mm (¾ in) magnetic tape, known as U-format
BS 6371:1983. Recommendations for citation of unpublished documents
BS 6372:1983, ISO 6939-1982. Method for determination of breaking strength of yarn from packages: skein method
BS 6373:1985, ISO 4880-1984. Glossary of terms relating to burning behaviour of textiles and textile products
BS 6374-1:1985. Lining of equipment with polymeric materials for the process idustries.Specification for lining with sheet thermoplastics
BS 6374-2:1984. Lining of equipment with polymeric materials for the process industries.Specification for lining with non-sheet applied thermoplastics
BS 6374-3:1984. Lining of equipment with polymeric materials for the process industries.Specification for lining with stoved thermosetting resins
BS 6374-4:1984. Lining of equipment with polymeric materials for the process industries.Specification for lining with cold curing thermosetting resins
BS 6374-5:1985. Lining of equipment with polymeric materials for the process industries.Specification for lining with rubbers
BS 6375-1:1983. Performance of windows.Classification for weathertightness (including guidance on selection and specification)
BS 6375-1:1989. Performance of windowsClassification for weathertightness (including guidance on selection and specification)
BS 6375-1:2004. Performance of windows and doorsClassification for weathertightness and guidance on selection and specification
BS 6375-1:2009. Performance of windows and doorsClassification for weathertightness and guidance on selection and specification
BS 6375-2:1987. Performance of windowsSpecification for operation and strength characteristics
BS 6375-2:2009. Performance of windows and doorsClassification for operation and strength characteristics and guidance on selection and specification
BS 6375-3:2009. Performance of windows and doorsClassification for additional performance characteristics and guidance on selection and specification
BS 6376-1:1983, ISO 6353-1:1982. Reagents for chemical analysisMethods of test
BS 6376-2:1984, ISO 6353-2:1983. Reagents for chemical analysisSpecifications (first series)
BS 6376-3:1989. Reagents for chemical analysisSpecifications (second series)
BS 6377:1983, ISO 6575-1982. Specification for fenugreek
BS 6378:1983, ISO 94-1982. Specification for dimensions of spindle gauges for ring-spinning and ring-doubling frames
BS 6379-1:1983, ISO 4072-1982. Sampling of coffee and coffee productsMethod of sampling green coffee in bags
BS 6379-2:1984, ISO 6670:1983. Sampling of coffee and coffee productsMethods of sampling instant coffee in cases with liners
BS 6379-3:1983, ISO 6666-1983. Sampling of coffee and coffee productsSpecification for a coffee trier for sampling green coffee
BS 6379-4:1991, ISO 6668:1991. Sampling of coffee and coffee productsMethod for preparation of samples of green coffee for use in sensory analysis
BS 638:1966. Specification for arc welding plant, equipment and accessories
BS 6380:1983. Guide to low temperature properties and cold weather use of diesel fuels and gas oils (classes A1, A2 and D of BS 2869)
BS 6380:1997. Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869
BS 6380:2012. Guide to low temperature properties and cold weather use of diesel fuels and gas oils
BS 638-1:1979. Arc welding power sources, equipment and accessoriesSpecification for oil cooled power sources for manual, semi-automatic and automatic metal-arc welding and for TIG welding
BS 6381:1983. Specification for drawing boards
BS 638-10:1990, EN 60974-1:1990. Arc welding power sources, equipment and accessoriesSpecification for safety requirements for arc welding equipment: welding power sources
BS 638-2:1979. Arc welding power sources, equipment and accessoriesSpecification for air cooled power sources for manual metal-arc welding with covered electrodes and for TIG welding
BS 6382-1:1983. Flexible intermediate bulk containersSpecification for flexible intermediate bulk containers designed to be lifted from above by integral or detachable devices
BS 638-3:1979. Arc welding power sources, equipment and accessoriesSpecification for air cooled power sources for semi-automatic and automatic metal-arc welding
BS 6383:1983, ISO 6173-1982. Glossary of terms for open-end spinning machines
BS 638-4:1979. Arc welding power sources, equipment and accessoriesSpecification for welding cables
BS 6384:1983, ISO 5697-1982. Methods for determination of braking performance of agricultural and forestry vehicles
BS 638-4:1996. Arc welding power sources, equipment and accessoriesSpecification for welding cables
BS 6385:1983, ISO 6687-1982. Method of specifying performance requirements for winches on forestry machinery
BS 638-5:1988. Arc welding power sources, equipment and accessoriesSpecification for accessories
BS 6385:1996, ISO 6687:1994. Machinery for forestry. Winches. Performance requirements
BS 638-6:1984. Arc welding power sources, equipment and accessoriesSpecification for safety requirements for construction
BS 6386-1:1983, ISO 5414-1:1982. Tool chucks with clamp screws for flatted parallel shanks.Specification for dimensions of chuck nose
BS 6386-1:1986, ISO 5414-1:1985. Tool chucks with clamp screws for flatted parallel shanksSpecification for dimensions of chuck nose
BS 6386-2:1983, ISO 5414-2:1982. Tool chucks with clamp screws for flatted parallel shanksSpecification for dimensions of taper shanks
BS 6387:1983. Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
BS 638-7:1984. Arc welding power sources, equipment and accessoriesSpecification for safety requirements for installation and use
BS 6387:1994. Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
BS 638-8:1984. Arc welding power sources, equipment and accessoriesSpecification for electrode holders and hand held torches and guns for MIG, MAG and TIG welding
BS 6388-1:1983, ISO 5630/1-1982. Accelerated ageing of paper and board.Method for dry heat treatment
BS 6388-1:1991, ISO 5630-1:1991. Accelerated ageing of paper and boardMethod for dry heat treatment at 105°C
BS 6388-2:1987, ISO 5630-4:1986. Accelerated ageing of paper and boardMethod for dry heat treatment at 120°C or 150°C
BS 6388-3:1987, ISO 5630-3:1986. Accelerated ageing of paper and boardMethod for moist heat treatment at 80°C and 65% relative humidity
BS 6388-3:1996, ISO 5630-3:1996. Accelerated ageing of paper and boardMethod for moist heat treatment at 80°C and 65% relative humidity
BS 6389:1983, ISO 5721-1981. Methods for determination of operator's field of vision for agricultural tractors
BS 638-9:1990, EN 50060:1989. Arc welding power sources, equipment and accessoriesSpecification for power sources for manual arc welding with limited duty
BS 639:1976. Specification. Covered electrodes for the manual metal-arc welding of carbon and carbon manganese steels
BS 639:1986. Specification for covered carbon and carbon manganese steel electrodes for manual metal-arc welding
BS 6391:1983. Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
BS 6391:2009. Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
BS 6392-0:1983. Testing of ethanol for industrial use.General introduction
BS 6392-1:1983. Testing of ethanol for industrial useMethod for detection of alkalinity or determination of acidity to phenolphthalein
BS 6392-2:1983. Testing of ethanol for industrial use.Method for determination of carbonyl compounds content present in small amounts (photometric method)
BS 6392-3:1983. Testing of ethanol for industrial use.Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method)
BS 6392-4:1983. Testing of ethanol for industrial use.Method for determination of aldehydes content
BS 6392-5:1983. Testing of ethanol for industrial use.Method of test for miscibility with water
BS 6392-6:1983. Testing of ethanol for industrial use.Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method)
BS 6392-7:1983. Testing of ethanol for industrial use.Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method)
BS 6392-8:1983. Testing of ethanol for industrial use.Method for determination of esters content
BS 6392-9:1983. Testing of ethanol for industrial use.Method for determination of permanganate time
BS 6393:1983. Specification for calibration specimens for use with stylus instruments used for the measurement of surface texture
BS 6393:1987, ISO 5436-1985. Specification for calibration of stylus instruments
BS 6394-1:1983, ISO 5738-1980. Trace elements in milk and milk productsMethod for the determination of copper content (reference method)
BS 6394-2:1985, ISO 6732-1985. Trace elements in milk and milk productsMethod for the determination of iron content (reference method)
BS 6395:1983. Method for numerical designation of fabric faults by visual inspection
BS 6396:1983. Code of practice for electrical systems in office furniture and office screens
BS 6396:1990. Specification for electrical systems in office furniture and office screens
BS 6396:1995. Specification for electrical systems in office furniture and office screens
BS 6396:2002. Electrical systems in office furniture and office screens. Specification
BS 6396:2008. Electrical systems in office furniture and educational furniture. Specification
BS 6397:1983, IEC 60263:1982. Specification for scales and sizes for plotting frequency characteristics and polar diagrams
BS 6398:1983. Specification for bitumen damp-proof courses for masonry
BS 6399-1:1984. Loading for buildingsCode of practice for dead and imposed loads
BS 6399-1:1996. Loading for buildingsCode of practice for dead and imposed loads
BS 6399-2:1995. Loading for buildingsCode of practice for wind loads
BS 6399-2:1997. Loading for buildingsCode of practice for wind loads
BS 6399-3:1988. Loading for buildingsCode of practice for imposed roof loads
BS 64:1946. Specification for steel fishbolts and nuts for railway rails
BS 64:1992. Specification for normal and high strength steel bolts and nuts for railway rail fishplates
BS 6400:1985. Specification for installation of domestic gas meters (2nd family gases)
BS 6400:1997. Specification for installation of domestic sized gas meters (2nd and 3rd family gases)
BS 6401:1983. Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS 6402:1983. Specification for personal sound exposure meters
BS 6403:1983. Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network
BS 6404-1:1984. Magnetic materialsClassification
BS 6404-10:1989, IEC 60404-10:1988. Magnetic materialsMethods of measurement of magnetic properties of magnetic steel and strip at medium frequencies
BS 6404-11:1991, IEC 60404-11:1991. Magnetic materialsMethod of test for the determination of surface insulation resistance of magnetic sheet and strip
BS 6404-12:1993, IEC 60404-12:1992. Magnetic materials.Guide to methods of assessment of temperature capability of interlaminar insulation coatings
BS 6404-13:1996, IEC 60404-13:1995. Magnetic materialsMethods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
BS 6404-2:1985. Magnetic materialsMethods of measurement of magnetic, electrical and physical properties of magnetic sheet and strip
BS 6404-20:1996. Magnetic materialsResistance and temperature classification of insulation coatings
BS 6404-3:1985, IEC 60404-3:1982. Magnetic materials.Methods of measurement of specific total losses of magnetic sheet and strip by means of a single sheet tester
BS 6404-3:1992, IEC 60404-3:1992. Magnetic materialsMethods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
BS 6404-4:1986, IEC 60404-4:1982. Magnetic materialsMethods of measurement of the d.c. magnetic properties of solid steels
BS 6404-5:1986, IEC 60404-5:1982. Magnetic materialsMethods of measurement of the magnetic properties of magnetically hard (permanent magnet) materials
BS 6404-5:1995. Magnetic materialsPermanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
BS 6404-6:1988, IEC 60404-6:1986. Magnetic materialsMethods of measurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4
BS 6404-7:1986, IEC 60404-7:1982. Magnetic materialsMethod of measurement of the coercivity of magnetic materials in an open magnetic circuit
BS 6404-8.1:1988, IEC 60404-8-1:1986. Magnetic materials. Individual materialsSpecification for magnetically hard materials
BS 6404-8.1:2001, IEC 60404-8-1:2001. Magnetic materials. Individual materialsMagnetically hard materials
BS 6404-8.10:1995, IEC 60404-8-10:1994. Magnetic materials. Individual materialsSpecification for magnetic materials (iron and steel) for use in relays
BS 6404-8.6:1988, IEC 60404-8-6:1986. Magnetic materials. Individual materialsSpecification for soft magnetic metallic materials
BS 6404-8.8:1992, IEC 60404-8-8:1991. Magnetic materials. Individual materialsSpecification for thin magnetic steel strip for use at medium frequencies
BS 6404-8.9:1995, IEC 60404-8-9:1994. Magnetic materials. Individual materialsStandard specification for sintered soft magnetic materials
BS 6404-8-8.2:1986. Magnetic materials. Individual materialsSpecification for cold-rolled, magnetic, non-oriented, alloyed steel strip delivered in the semi-processed state
BS 6404-8-8.3:1986. Magnetic materials. Individual materialsSpecification for cold-rolled, magnetic, non-oriented, non-alloyed steel strip delivered in the semi-processed state
BS 6404-8-8.4:1986. Magnetic materials. Individual materialsSpecification for cold-rolled, non-oriented magnetic steel sheet and strip delivered in the finally annealed state
BS 6404-8-8.5:1990, IEC 60404-8-5:1989. Magnetic materials. Individual materialsSpecification for steel sheet and strip with specified mechanical properties and magnetic permeability
BS 6404-8-8.7:1988. Magnetic materials. Individual materialsSpecification for grain-oriented magnetic steel sheet and strip
BS 6404-9:1988, IEC 60404-9:1987. Magnetic materialsMethods for determination of the geometrical characteristics of magnetic steel sheet and strip
BS 6405:1984. Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2
BS 6406:1983, ISO 5507-1982. Nomenclature for oilseeds
BS 6406:1992, ISO 5507:1992. Nomenclature for oilseeds
BS 6407-1:1983. Cage pallets for retail use.Specification for collapsible cage pallets rated at 300 kg
BS 6407-2:1984. Cage pallets for retail use.Guide to the safe handling and use of collapsible cage pallets rated at 300 kg
BS 6408:1983. Specification for clothing made from coated fabrics for protection against wet weather
BS 6409:1983, ISO 6539-1983. Specification for whole or ground (powdered) cinnamon
BS 641:1951. Dimensions of small rivets for general purposes
BS 6410:1984. Methods of test for filter papers
BS 6410:1991. Methods of test for filter papers
BS 6411:1983, IEC 60756:1983. Specification for time base stability of non-broadcast video recorders
BS 6412:1983, IEC 60735:1982. Methods for measurement of video tape properties
BS 6413-0:1983, ISO 6743-0:1981. Lubricants, industrial oils and related products (class L)Classification (general)
BS 6413-1:1983, ISO 6743-1:1981. Lubricants, industrial oils and related products (class L)Classification for family A (total loss systems)
BS 6413-2:1983, ISO 6743-2:1981. Lubricants, industrial oils and related products (class L)Classification for family F (spindle bearings, bearings and associated clutches)
BS 6413-3.1:1988, ISO 6743-3A:1987. Lubricants, industrial oils and related products (class L). Classification for family D (compressors).Air compressors
BS 6413-3.2:1989, ISO 6743-3B:1988. Lubricants, industrial oils and related products (class L). Classification for family D (compressors).Gas and refrigeration compressors
BS 6413-4:1983, ISO 6743/4-1982. Lubricants, industrial oils and related products (class L)Classification for family H (hydraulic systems)
BS 6413-5:1988, ISO 6743-5:1988. Lubricants, industrial oils and related products (class L).Classification for family T (turbines)
BS 6413-6:1991, ISO 6743-6:1990. Lubricants, industrial oils and related products (class L)Classification for family C (gears)
BS 6413-7:1988, ISO 6743-7:1986. Lubricants, industrial oils and related products (class L)Classification for family M (metalworking)
BS 6413-8:1988, ISO 6743-8:1987. Lubricants, industrial oils and related products (class L)Classification for family R (temporary protection against corrosion)
BS 6413-9:1988, ISO 6743-9:1987. Lubricants, industrial oils and related products (class L)Classification for family X (greases)
BS 6414:1983, ISO 2017:1982. Method for specifying characteristics of vibration and shock isolators
BS 6415:1983, IEC 60752:1982. Specification for audio-frequency calibration tape for transverse track video recorders
BS 6416:1983, ISO 1703-1983. Nomenclature for assembly tools for screws and nuts
BS 6417:1983, ISO 5562-1983. Specification for whole and ground turmeric
BS 6418:1983, IEC 60764:1983. Specification for cordless audio transmission devices using infra-red radiation
BS 6419:1983, ISO 7464-1983. Method for measurement of drawbar pull of earth-moving machinery
BS 6420:1983, ISO 7128-1983. Methods for measuring the dimensions of whole machines with their equipment used for earth-moving
BS 6421:1983, ISO 7451-1983. Method for volumetric rating of hoe type buckets of hydraulic excavators used for earth-moving
BS 6422:1983, ISO 7546-1983. Method for volumetric rating of loader and front loading excavator buckets used for earth-moving
BS 6423:1983. Code of practice for maintenance of electrical switchgear and controlgear for voltages up to and including 1 kV
BS 6424:1984. Specification for QAC based aromatic disinfectant fluids
BS 6424:1990. Specification for QAC based aromatic disinfectant fluids
BS 6425-1:1983. Methods of test for gases evolved during combustion of electric cables.Method for determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
BS 6425-1:1990. Test on gases evolved during the combustion of materials from cablesMethod for determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
BS 6425-2:1993. Test on gases evolved during the combustion of materials from cablesDetermination of degree of acidity (corrosivity) of gases by measuring pH and conductivity
BS 6426:1983. Specification for made-up curtains
BS 6427-1:1983, ISO 6599-1:1983. Conditioning of sacks for testing.Method for conditioning paper sacks
BS 6428:1983, ISO 7023-1983. Method for sampling empty sacks for testing
BS 6429:1983, ISO 6936-1983. Method for conversion between the ISO 7-bit coded character set (ISO 646) and the CCITT international telegraph alphabet No. 2 (ITA 2)
BS 6429:1989, ISO 6936:1988. Method for conversion between the two coded character sets of BS 4730 (ISO 646) and BS 6692- 2 (ISO 6937-2) and the CCITT international telegraph alphabet No. 2 (ITA 2)
BS 643:1970. Specification for white metal ingots for capping steel wire ropes
BS 6430:1983, ISO 2955-1983. Method for representing SI and other units in information processing systems with limited character sets
BS 6431-1:1983, EN 87:1991. Ceramic floor and wall tilesSpecification for classification and marking, including definitions and characteristics
BS 6431-10:1984, EN 98:1991. Ceramic floor and wall tilesMethod for determination of dimensions and surface quality
BS 6431-11:1983, EN 99:1991. Ceramic floor and wall tilesMethod for determination of water absorption
BS 6431-12:1983, EN 100:1991. Ceramic floor and wall tilesMethod for determination of modulus of rupture
BS 6431-13:1986, EN 101:1991. Ceramic floor and wall tilesMethod for determination of scratch hardness of surface according to Mohs
BS 6431-14:1983, EN 102:1991. Ceramic floor and wall tilesMethod for determination of resistance to deep abrasion. Unglazed tiles
BS 6431-15:1983, EN 103:1991. Ceramic floor and wall tilesMethod for determination of linear thermal expansion
BS 6431-16:1983, EN 104:1991. Ceramic floor and wall tilesMethod for determination of resistance to thermal shock
BS 6431-17:1983, EN 105:1991. Ceramic floor and wall tilesMethod for determination of crazing reistance. Glazed tiles
BS 6431-18:1983, EN 106:1991. Ceramic floor and wall tilesMethod for determination of chemical resistance. Unglazed tiles
BS 6431-19:1984, EN 122:1991. Ceramic floor and wall tilesMethod for determination of chemical resistance. Glazed tiles
BS 6431-20:1984, EN 154:1991. Ceramic floor and wall tilesMethod for determination of resistance to surface abrasion. Glazed tiles
BS 6431-21:1984, EN 155:1991. Ceramic floor and wall tilesMethod for determination of moisture expansion using boiling water. Unglazed tiles
BS 6431-22:1986, EN 202:1991. Ceramic floor and wall tilesMethod for determination of frost resistance
BS 6431-23:1986, EN 163. Ceramic floor and wall tilesSpecification for sampling and basis for acceptance
BS 6432:1984. Methods for determining properties of glass fibre reinforced cement material
BS 6433:1983, ISO 7294-1983. Terminology and designation of the profile shape of woodworking saw teeth
BS 6434:1984. Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'
BS 6435:1984. Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors
BS 6436:1984. Specification for ground mounted distribution transformers for cable box or unit substation connection
BS 6437:1984. Specification for polyethylene pipes (type 50) in metric diameters for general purposes
BS 6438-1:1984, IEC 60746-1:1982. Electrochemical analyzersMethod for specifying performance common to all analyzers
BS 6438-2:1984, IEC 60746-2:1982. Electrochemical analyzersMethod for specifying performance of pH value analyzers
BS 6438-3:1986, IEC 60746-3:1985. Electrochemical analyzersMethod for specifying performance of electrolytic conductivity analyzers
BS 644:2003. Timber windows. Factory assembled windows of various types. Specification
BS 644:2009. Timber windows. Fully finished factory-assembled windows of various types. Specification
BS 644:2012. Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
BS 6440:1983. Code of practice for powered lifting platforms for use by disabled persons
BS 6440:1999. Powered lifting platforms for use by disabled persons. Code of practice
BS 6440:2011. Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification
BS 6441:1983, ISO 91-1:1982. Schedule for petroleum measurement tables
BS 644-1:1989. Wood windowsSpecification for factory assembled windows of various types
BS 6441:1993, ISO 91-1:1992. Schedule for petroleum measurement tables
BS 644-2:1958. Wood windowsWood double hung sash windows
BS 6442:1984. Specification for limits of surface imperfections on elastomeric toroidal sealing rings ('O'-rings)
BS 644-3:1951. Wood windowsWood double-hung sash and case windows (Scottish type)
BS 6443:1984. Method for penetrant flaw detection
BS 6444-1:1984. Cardiovascular implants.Specification for packaging and labelling of heart valve substitutes
BS 6444-1:1990, ISO 5840:1989. Cardiovascular implantsMethods of test for heart valve substitutes and requirements for their packaging and labelling
BS 6445-1:1983, ISO 6677-1983. Hexafluorosilicic acid for industrial use.Method for determination of available fluorine content (potentiometric method after distillation)
BS 6446:1984. Specification for manufacture of glued structural components of timber and wood based panel products
BS 6446:1997. Specification for manufacture of glued structural components of timber and wood based panels
BS 6447:1984. Specification for absolute and gauge pressure transmitters with electrical outputs
BS 6448:1995. Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar
BS 6448-1:1987. Gas governorsSpecification for pressure governors with nominal connection size up to 50 mm for gas appliances with inlet pressure up to and including 200 mbar
BS 6449-2:1984, ISO 5794-2:1982. Rubber compounding ingredients: precipitated, hydrated silicaMethod for determination of physical properties in rubber (including test recipe)
BS 6450-1:1983. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators.Specification for general requirements
BS 6450-1:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operatorsSpecification for general requirements
BS 6450-2:1983. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators.Specification for private branch exchanges with terminating stations treated as an entirety
BS 6450-2:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operatorsSpecification for private branch exchanges with terminating stations treated as an entirety
BS 6450-3.1:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators. Direct dialling in on private branch exchangesSpecification for direct dialling in on private branch exchanges with terminating stations treated as an entirety
BS 6450-4:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operatorsSpecification for ports
BS 6450-5.1:1993. Private branch exchanges for connection to the British Telecommunications public switched telephone network. Facilities on private branch exchangesSpecification for facilities on private branch exchanges with terminating stations treated as an entirety
BS 6450-5-5.1:1984. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators. Facilities on private branch exchanges.Specification for facilities on private branch exchanges with terminating stations treated as an entirety
BS 6450-6.1:1993. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators. Simple call-routeing mode (SCRM)Specification for the simple call-routeing mode of PBX operation, with terminating stations treated as an entirety
BS 6450-6-6.1:1986. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators. Simple call-routing mode (SCRM).Specification for the simple call-routing mode of PBX operation, with terminating stations treated as an entirety
BS 6450-7:1984. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators.Specification for the procedure of in-service observation for PBXs undergoing type approval
BS 6450-7:1990. Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators.Specification for the procedure for in-service observation of PBXs undergoing type approval
BS 6451:1984. Specification for netting and fibre rope load restraint systems in surface transport
BS 6452-1:1984. Beads for internal plastering and dry liningSpecification for galvanized steel beads
BS 6453:1984. Specification for performance of leathers for garments
BS 6454:1983, IEC 60205:1966,IEC 60205A:1968,IEC 60205B:1974. Method for calculation of the effective parameters of magnetic piece parts
BS 6455:1984. Method for monitoring the levels of residual solvents in flexible packaging materials
BS 6456:1983, ISO 6924:1983. Glossary of terms for correspondence envelopes
BS 6457:1984. Specification for reconstructed stone masonry units
BS 6458-1:1984. Fire hazard testing for electrotechnical products.General introduction
BS 6458-1:1990, IEC 60695-4:1989. Fire hazard testing for electrotechnical productsGlossary of terms
BS 6458-2.1:1984, IEC 60695-2-1:1980. Fire hazard testing for electrotechnical products. Test methodsGlow-wire test
BS 6458-2.3:1985, IEC 60695-2-3:1984. Fire hazard testing for electrotechnical products. Test methodsBad-connection test with heaters
BS 6458-2-2.2:1984, IEC 60695-2-2:1980. Fire hazard testing for electrotechnical products. Methods of test.Needle-flame test
BS 6459-1:1984. Door closersSpecification for mechanical performance of crank and rack and pinion overhead closers
BS 646:1958+A2:2013. Specification for Cartridge fuse-links (rated up to 5 amperes) for a.c. and d.c. service
BS 6460-1:1983. Accreditation of testing laboratories.Specification of the general requirements for the technical competence of testing laboratories
BS 6461-1:1984. Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat)Code of practice for masonry chimneys and flue pipes
BS 6461-2:1984. Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat)Code of practice for factory-made insulated chimneys for internal applications
BS 6462:1985. Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners
BS 6463-1:1984. Quicklime, hydrated lime and natural calcium carbonateMethods of sampling
BS 6463-101:1996. Quicklime, hydrated lime and natural calcium carbonateMethods for preparing samples for testing
BS 6463-102:2001. Quicklime, hydrated lime and natural calcium carbonateMethods for chemical analysis
BS 6463-103:1999. Quicklime, hydrated lime and natural calcium carbonateMethods for physical testing
BS 6463-2:1984. Quicklime, hydrated lime and natural calcium carbonateMethods of chemical analysis
BS 6463-3:1987. Quicklime, hydrated lime and natural calcium carbonateMethods of test for physical properties of quicklime
BS 6463-4:1987. Quicklime, hydrated lime and natural calcium carbonateMethods of test for physical properties of hydrated lime and lime putty
BS 6464:1984. Specification for reinforced plastics pipes, fittings and joints for process plants
BS 6465-1:1984. Sanitary installations.Code of practice for scale of provision, selection and installation of sanitary appliances
BS 6465-1:1994. Sanitary installationsCode of practice for scale of provision, selection and installation of sanitary appliances
BS 6465-1:2006+A1:2009. Sanitary installationsCode of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances
BS 6465-2:1996. Sanitary installationsCode of practice for space requirements for sanitary appliances
BS 6465-3:2006. Sanitary installationsCode of practice for the selection, installation and maintenance of sanitary and associated appliances
BS 6465-4:2010. Sanitary installationsCode of practice for the provision of public toilets
BS 6466:1984. Code of practice for design and installation of ceramic fibre furnace linings
BS 6467-1:1985. Electrical apparatus with protection by enclosure for use in the presence of combustible dustsSpecification for apparatus
BS 6467-2:1988. Electrical apparatus with protection by enclosure for use in the presence of combustible dustsGuide to selection, installation and maintenance
BS 6468:1984. Specification for depth micrometers
BS 6468:2008. Specification for depth micrometers
BS 6469:1984. Methods of test for insulation and sheaths of electric cables
BS 6469:1990. Methods of test for insulation and sheaths of electric cables
BS 6469-1-1.1:1992. Insulating and sheathing materials of electric cables. Methods of test for general applicationMeasurement of thickness and overall dimensions. Tests for determining the mechanical properties
BS 6469-1-1.2:1992. Insulating and sheathing materials of electric cables. Methods of test for general applicationThermal ageing methods
BS 6469-1-1.3:1992. Insulating and sheathing materials of electric cables. Methods of test for general applicationInsulating and sheathing materials of electric cables. Methods of test for general application. Methods for determining the density. Water absorption tests. Shrinkage test
BS 6469-1-1.4:1992. Insulating and sheathing materials of electric cables. Methods of test for general applicationTests at low temperature
BS 6469-2-2.1:1992. Insulating and sheathing materials of electric cables. Methods of test specific to elastomeric compoundsOzone resistance test. Hot set test. Mineral oil immersion test
BS 6469-3-3.1:1992. Insulating and sheathing materials of electric cables. Methods of test specific to PVC compoundsPressure test at high temperature. Tests for resistance to cracking
BS 6469-3-3.2:1992. Insulating and sheathing materials of electric cables. Methods of test specific to PVC compoundsLoss of mass test. Thermal stability test
BS 6469-4.2:1992, IEC 60811-4-2:1990. Insulating and sheathing materials of electric cables. Methods of test specific to polyethylene and polypropylene compoundsElongation at break after pre-conditioning. Wrapping test after pre-conditioning. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term stability test. Test method for copper-catalysed oxidative degradation
BS 6469-4-4.1:1992. Insulating and sheathing materials of electric cables. Methods of test specific to polyethylene and polypropylene compoundsResistance to environmental stress cracking. Wrapping test after thermal ageing in air. Measurement of the melt flow index. Carbon black and/or mineral content measurement in PE
BS 6469-5.1:1992, IEC 60811-5-1:1990. Insulating and sheathing materials of electric cables. Methods of test specific to filling compoundsDrop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23°C. D.C. resistivity at 23°C and 100°C
BS 6469-98.1:1996. Insulating and sheathing materials of electric cables. Additional harmonized non-electrical test methodsTest for TMPU sheath
BS 6469-99.2:1992. Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811Electrical tests
BS 6469-99-1:1992. Insulating and sheathing materials of electric cablesTest methods used in the United Kingdom but not specified in BS EN 60811
BS 647:1981. Methods for sampling and testing glues (bone, skin and fish glues)
BS 6470:1984, IEC 60733:1982. Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard
BS 6471:1984. Method for determination of the antimicrobial value of QAC disinfectant formulations
BS 6472:1984. Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)
BS 6472:1992. Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)
BS 6472-1:2008. Guide to evaluation of human exposure to vibration in buildingsVibration sources other than blasting
BS 6472-2:2008. Guide to evaluation of human exposure to vibration in buildingsBlast-induced vibration
BS 6473:1984. Specification for protective hats for horse and pony riders
BS 6474-1:1984, ISO 5426-1983. Coded character sets for bibliographic information interchangeSpecification for extension of the Latin alphabet coded character set
BS 6474-2:1985, ISO 5428-1984. Coded character sets for bibliographic information interchangeSpecification for Greek alphabet coded character set
BS 6474-3:1984, ISO 6438-1983. Coded character sets for bibliographic information interchangeSpecification for African coded character set
BS 6474-4:1986, ISO 5427-1984. Coded character sets for bibliographic information interchangeSpecification for extension of the Cyrillic alphabet coded character set
BS 6475:1984. Specification for processor system bus interface (Eurobus A)
BS 6476:1984. Guide to garment quality and relevant British Standards
BS 6477:1984. Specification for water repellents for masonry surfaces
BS 6477:1992. Specification for water repellents for masonry surfaces
BS 6478:1984, ISO 7154-1983. Guide to filing bibliographic information in libraries and documentation
BS 6479:1984. Method for determination and verification of the effective depth of carburized and hardened cases in steels
BS 648:1964. Schedule of weights of building materials
BS 6480:1988. Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
BS 6480-1:1969. Specification for impregnated paper-insulated cables for electricity supply.Lead or lead alloy sheathed cables for working voltages up to and including 33 kV
BS 6481:1984. Method for determination of effective depth of hardening of steel after flame or induction hardening
BS 6482:1984, IEC 60774:1983. Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type VHS
BS 6483-1:1984, ISO 5690-1:1982. Fertilizer distributors.Methods of evaluating performance under laboratory and field conditions
BS 6483-2:1985, ISO 5690-2:1984. Fertilizer distributors.Method of test for fertilizer distributors in lines
BS 6484:1984. Specification for electrical safety requirements for independent power supply units for indirect connection to certain telecommunication networks
BS 6485:1971. Specification for PVC-covered conductors for overhead power lines
BS 6485:1990. Specification for PVC-covered conductors for overhead power lines
BS 6485:1999. PVC-covered conductors for overhead power lines
BS 6486:1984, ISO 7457-1983. Method for measurement of turning dimensions of wheeled earthmoving machinery
BS 6487:1984, ISO 7378-1983. Specification for split pin holes and wire holes in bolts, screws and studs
BS 6488:1984. Code of practice for configuration management of computer-based systems
BS 6489:1984. Specification for headforms for use in the testing of protective helmets
BS 6490:1984, ISO 7852-1983. Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery
BS 6491-1:1984. Electro-sensitive safety systems for industrial machinesSpecification for general requirements
BS 6491-2:1987. Electro-sensitive safety systems for industrial machinesSpecification for particular requirements for an electro-sensitive safety system incorporating a photoelectric sensing unit(s)
BS 6492-1:1984. Transportable accommodation unitsRecommendations for design and construction
BS 6492-2:1985. Transportable accommodation unitsRecommendations for transportation and siting, with guidance on occupancy
BS 6492-2:1995. Transportable accommodation unitsRecommendations for transportation and siting, with guidance on occupancy
BS 6493-1.1:1984, IEC 60747-1:1983. Semiconductor devices. Discrete devicesGeneral
BS 6493-1.2:1984, IEC 60747-2:1983. Semiconductor devices. Discrete devicesRecommendations for rectifier diodes
BS 6493-1.3:1986, IEC 60747-3:1985. Semiconductor devices. Discrete devicesRecommendations for signal (including switching) and regulator diodes
BS 6493-1.4:1992, IEC 60747-4:1991. Semiconductor devices. Discrete devicesRecommendations for microwave diodes and transistors
BS 6493-1.5:1992, IEC 60747-5:1992. Semiconductor devices. Discrete devicesRecommendations for optoelectronic devices
BS 6493-1.6:1984, IEC 60747-6:1983. Semiconductor devices. Discrete devicesRecommendations for thyristors
BS 6493-1.7:1989, IEC 60747-7:1988. Semiconductor devices. Discrete devicesRecommendations for bipolar transistors
BS 6493-1.8:1985, IEC 60747-8:1984. Semiconductor devices. Discrete devicesRecommendations for field-effect transistors
BS 6493-1-1.5:1985, IEC 60747-5:1984. Semiconductor devices: discrete devices and integrated circuits. Discrete devices.Recommendations for optoelectronic devices
BS 6493-2.1:1985, IEC 60748-1:1984. Semiconductor devices. Integrated circuitsGeneral
BS 6493-2.3:1987, IEC 60748-3:1986. Semiconductor devices. Integrated circuitsRecommendations for analogue integrated circuits
BS 6493-2-2.2:1986, IEC 60748-2:1985. Semiconductor devices. Integrated circuitsRecommendations for digital integrated circuits
BS 6493-2-2.4:1989, IEC 60748-4:1987. Semiconductor devices. Integrated circuitsRecommendations for interface integrated circuits
BS 6493-3:1985, IEC 60749:1984. Semiconductor devicesMechanical and climatic test methods
BS 6494-1:1984, ISO 4401-1980. Hydraulic fluid power valve mounting surfacesSpecification for four-port directional control valves
BS 6494-2:1986. Hydraulic fluid power valve mounting surfacesSpecification for four-port and five-port servo-valves
BS 6494-3:1989, ISO 6264:1987. Hydraulic fluid power valve mounting surfacesSpecification for pressure-relief valves
BS 6494-4:1989, ISO 7790:1986. Hydraulic fluid power valve mounting surfaces.Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves
BS 6494-5:1989, ISO 6263:1987. Hydraulic fluid power valve mounting surfacesSpecification for compensated flow-control valves
BS 6494-6:1989, ISO 5781:1987. Hydraulic fluid power valve mounting surfacesSpecification for pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves
BS 6496:1984. Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
BS 6497:1984. Specification for powder organic coatings for application and stoving to hot-dip galvanized hot-rolled steel sections and preformed steel sheet for windows and associated external architectural purposes, and for the finish on galvanized steel sections and preformed sheet coated with powder organic coatings
BS 6498:1984. Guide to preparation of microfilm and other microforms that may be required as evidence
BS 6498:1991. Guide to preparation of microfilm and other microforms that may be required as evidence
BS 6498:2002. Guide to preparation of microfilm and other microforms that may be required as evidence
BS 6499:1985. Specification for metal screw necks, screw caps and inner seals for metal containers
BS 6499:1998. Metal screw necks, screw caps and inner seals for metal containers. Specification
BS 65:1981. Specification for vitrified clay pipes, fittings and joints
BS 65:1988. Specification for vitrified clay pipes, fittings, joints and ducts
BS 65:1991. Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
BS 650:1967. Specification for castor oil ('firsts' quality)
BS 6500:1984. Specification for insulated flexible cords and cables
BS 6500:1990. Specification for insulated flexible cords and cables
BS 6500:1994. Specification for insulated flexible cords and cables
BS 6500:2000. Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments
BS 6501-1:1984. Flexible metallic hose assemblies.Specification for corrugated hose assemblies
BS 6501-1:1991. Flexible metallic hose assembliesSpecification for corrugated hose assemblies
BS 6501-1:2004. Metal hose assembliesGuidance on the construction and use of corrugated hose assemblies
BS 6501-2:1988. Flexible metallic hose assemblies.Specification for strip wound hoses and hose assemblies
BS 6501-2:1991. Flexible metallic hose assemblies.Specification for strip wound hoses and hose assemblies
BS 6502:1984, IEC 60767:1983. Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type Beta format
BS 6503:1984. Specification for handheld blowpipes, mixers and nozzles, using fuel gas and oxygen, for gas welding, cutting and related processes
BS 6504:1984. Method for determination of water absorption of paper and board (Klemm method)
BS 6505:1984. Specification for rubber-type materials used for controls components for use with 1st, 2nd and 3rd family gases
BS 6506:1984. Code of practice for installation of private branch exchanges for connection to the British Telecommunications public switched telephone network
BS 6507:1984, ISO 2288-1979. Method for bench testing engines for agricultural tractors and machines for net power
BS 6507:1997, ISO 2288:1997. Agricultural tractors and machines. Engine test code. Net power
BS 6508:1984, ISO 4004-1983. Recommendations for track widths for agricultural tractors and machinery
BS 6509:1984, ISO 2332:1983. Specification for clearance zone on implements for the three-point linkage to agricultural tractors
BS 651:1967. Specification for crude maize oil
BS 6510:1984. Specification for steel windows, sills, window boards and doors
BS 6510:2005. Steel-framed windows and glazed doors
BS 6510:2010. Steel-framed windows and glazed doors. Specification
BS 6511:1984, ISO 7806-1983. Specification for designation of perforations in industrial plate screens
BS 6512:1984. Specification for limits and repair of surface discontinuities of hot-rolled steel plates and wide flats
BS 6513-1:1984. Wideband cabled distribution systems.Glossary of terms
BS 6513-2:1984. Wideband cabled distribution systemsMethods of measurement
BS 6513-3:1984. Wideband cabled distribution systemsSpecification for performance requirements, for downstream television and f.m. sound radio signals
BS 6513-4:1984. Wideband cabled distribution systemsSpecification for performance requirements, for upstream television
BS 6513-5:1987. Wideband cabled distribution systems.Recommendations for one-way and interactive data services
BS 6513-6:1987. Wideband cabled distribution systems.Specification for safety requirements
BS 6514:1984. Guide for implementation of V24 or RS232 as an asynchronous local interface
BS 6515:1984. Specification for polyethylene damp-proof courses for masonry
BS 6516-2:1990, IEC 60352-2:1990. Solderless connectionsSpecification for solderless crimped connections (including test methods and practical guidance)
BS 6517:1984, EN 50007:1981. Specification for low voltage switchgear and controlgear for industrial use. Single hole mounted control switches and indicator lights. Mounting dimensions
BS 6518:1984, EN 50041:1981. Specification for low voltage switchgear and controlgear for industrial use. Control switches. Position switches 42.5 x 80. Dimensions and characteristics
BS 6519:1984, EN 50044:1981. Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Identifications of connections
BS 652:1967. Specification for crude palm kernel oil
BS 6520:1984, EN 50047:1981. Specification for low voltage switchgear and controlgear for industrial use. Control switches. Position switches 30 x 55. Dimensions and characteristics
BS 6521:1984, ISO 7592-1983. Guide for proper use and maintenance of calibrated round steel link lifting chains
BS 6522:1984. Methods for determination of percentage water saturation of insulating oil
BS 6523:1984. Specification for glass beakers for laboratory use
BS 6524:1984. Method for determination of the surface resistivity of a textile fabric
BS 6525:1984. Specification for design and construction of reservoirs used in hydraulic fluid power systems
BS 6526:1984. Specification for domestic oven gloves
BS 6526:1998. Domestic oven gloves. Requirements and test methods
BS 6527:1984. Specification for limits and measurements of spurious signals generated by data processing and electronic office equipment
BS 6527:1988, EN 55022:1987. Specification for limits and methods of measurement of radio interference characteristics of information technology equipment
BS 6528:1984, ISO 5408-1983. Glossary of terms for cylindrical screw threads
BS 6529:1984. Recommendations for examining documents, determining their subjects and selecting indexing terms
BS 653:1967. Specification for crude soya bean oil
BS 6530:1984, IEC 60336:1982. Methods for determining the characteristics of focal spots in diagnostic X-ray tube assemblies for medical use
BS 6531-1:1984. 10 Mbps slotted ring local area network.Specification for the coding of bits and structure of slots and mini-packets
BS 6531-2:1984. 10 Mbps slotted ring local area network.Specification for configuration
BS 6531-3:1984. 10 Mbps slotted ring local area network.Specification for free-standing repeaters
BS 6531-4:1984. 10 Mbps slotted ring local area network.Specification for Basic and Enhanced Class nodes with Type 1 node/DTE interface
BS 6531-5:1984. 10 Mbps slotted ring local area network.Specification for monitor
BS 6531-6:1984. 10 Mbps slotted ring local area network.Specification for logging station
BS 6531-7:1984. 10 Mbps slotted ring local area network.Specification for slave power supplies
BS 6532-1:1984. Data terminal equipment for attachment to 10 Mbps slotted ring local area network.Specification for media access control procedures for data terminal equipment
BS 6532-2:1984. Data terminal equipment for attachment to 10 Mbps slotted ring local area network.Specification for implementation requirements for media access control in general purpose data terminal equipment
BS 6533:1984. Guide to macroscopic examination of steel by etching with strong mineral acids
BS 6534:1984. Method for quantitative determination of lead in tin coatings
BS 6535-1:1984, ISO 5923:1984. Fire extinguishing media.Specification for carbon dioxide
BS 6535-2:1984, ISO 7201-1982. Fire extinguishing media.Specification for halogenated hydrocarbons
BS 6535-2-2.2:1989. Fire extinguishing media. Halons.Code of practice for safe handling and transfer procedures
BS 6535-3:1989. Fire extinguishing mediaSpecification for powder
BS 6536:1985. Specification for continuously hot-dip aluminium/silicon coated cold reduced carbon steel sheet and strip
BS 6537:1984. Specification for staple type connectors for hydraulic fluid power applications
BS 6538-1:1985, ISO 5636-1:1984. Air permeance of paper and board.Method for determination of air permeance: general aspects of testing
BS 6538-2:1985, ISO 5636-3:1984. Air permeance of paper and board.Method for determination of air permeance using the Bendtsen apparatus
BS 6538-2:1992, ISO 5636-3:1992. Air permeance of paper and boardMethod for determination of air permeance using the Bendtsen apparatus
BS 6538-3:1987, ISO 5636-5:1986. Air permeance of paper and boardMethod for determination of air permeance using the Gurley apparatus
BS 6539:1984. Specification for fireguards for use with solid fuel appliances
BS 6540-1:1985. Air filters used in air conditioning and general ventilationMethods of test for atmospheric dust spot efficiency and synthetic dust weight arrestance
BS 6541:1985, ISO 7064-1983. Specification for check character systems for use in information interchange, and guidance on choice and methods of application
BS 6542-1:1984, ISO 7665:1983. File structure and labelling of flexible disk cartridges for information interchangeSpecification for sequential file allocation structure
BS 6542-2:1988, EN 29293:1989,ISO 9293:1987. File structure and labelling of flexible disk cartridges for information interchangeSpecification for variable file allocation structure
BS 6543:1985. Guide to use of industrial by-products and waste materials in building and civil engineering
BS 6544:1984, ISO 7891-1984. Specification for holes in dozer end bits for earth moving machinery
BS 6545:1984, ISO 6177-1983. Specification for main dimensions of, and terminology for, cloth rollers in textile machinery
BS 6546:1984. Specification for tracheal tube connectors
BS 6546:1994, ISO 7228:1993. Specification for tracheal tube connectors
BS 6547:1984, ISO 2013-1983. Method for measurement of variations of form and position of beams in textile machinery
BS 6548-1:1984, IEC 60706-1:1982. Maintainability of equipmentGuide to specifying and contracting for maintainability
BS 6548-2:1992, IEC 60706-2:1990. Maintainability of equipmentGuide to maintainability studies during the design phase
BS 6548-3:1992, IEC 60706-3:1987. Maintainability of equipmentGuide to maintainability, verification and the collection, analysis and presentation of maintainability data
BS 6548-4:1993, IEC 60706-4:1992. Maintainability of equipmentGuide to the planning of maintenance and maintenance support
BS 6548-5:1995, IEC 60706-5:1994. Maintainability of equipmentGuide to diagnostic testing
BS 6548-6:1995, IEC 60706-6:1994. Maintainability of equipmentGuide to statistical methods in maintainability evaluation
BS 6549:1984, ISO 5247-1983. Glossary of terms for classification of weaving machines
BS 655:1967. Specification for refined cottonseed oil
BS 6550:1985, ISO 6720-1981. Recommendation for working widths of equipment for sowing, planting, distributing fertilizers and spraying
BS 6551:1985. Specification for polyester fibre woven tapes for electrical purposes
BS 6552:1984, EN 50049:1983. Specification for domestic and similar electronic equipment. Interconnection requirements: peritelevision connector
BS 6552:1990, EN 50049-1:1989. Specification for domestic and similar electronic equipment. Interconnection requirements: peritelevision connector
BS 6553:1984, IEC 60787:1983. Guide for selection of fuse links of high-voltage fuses for transformer circuit applications
BS 6554-1:1984, IEC 60740:1982. Laminations for transformers and inductors for use in telecommunication and electronic equipmentSpecification for dimensions, mechanical characteristics and electrical testing
BS 6556-1:1985. Low speed digital signals for use in coal mines.Specification for optical coupling
BS 6556-2:1985. Low speed digital signals for use in coal minesSpecification for transformer coupling
BS 6556-3:1985. Low speed digital signals for use in coal minesSpecification for message protocols
BS 6557:1985. Specification for kettles
BS 6558-1:1985. Optical fibres and cables.Specification for general requirements
BS 6559:1989, HD 1/160. Guide. General introductory document on European (or CEN) methods of test for wood preservatives
BS 6560:1984, ISO 5593-1984. Glossary of terms for rolling bearings
BS 6561:1985. Specification for zinc alloy sheet and strip for building
BS 6562-1:1985, EU 52-1983. Terms used in the iron and steel industryGlossary of heat treatment terms
BS 6562-2:1986. Terms used in the iron and steel industry.Glossary of terms used in classifying and defining steel industry products by shape and dimensions
BS 6562-3:1990, EN 10020:1988. Terms used in the iron and steel industry.Definition and classification of grades of steel
BS 6563:1985. Method for determination of the roughness of paper and board by the Parker Print-surf apparatus
BS 6564-1-1.1:1989. Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusionSpecification
BS 6564-1-1.2:1989. Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusionMethod of specifying
BS 6564-2:1985. Polytetrafluoroethylene (PTFE) materials and products.Specification for fabricated unfilled polytetrafluoroethylene products
BS 6564-2:1991. Polytetrafluoroethylene (PTFE) materials and productsSpecification for fabricated unfilled polytetrafluoroethylene products
BS 6564-3:1990. Polytetrafluoroethylene (PTFE) materials and productsSpecification for E glass fibre filled polytetrafluoroethylene
BS 6565:1985, ISO 225-1983. Method for dimensioning and designating bolts, screws, studs and nuts
BS 6566-1:1985. PlywoodSpecification for construction of panels and characteristics of plies including marking
BS 6566-2:1985. PlywoodGlossary of terms
BS 6566-3:1985. PlywoodSpecification for acceptance levels for post-manufacture batch testing including sampling
BS 6566-4:1985. PlywoodSpecification for tolerances on the dimensions of plywood panels
BS 6566-5:1985. PlywoodSpecification for moisture content
BS 6566-6:1985. PlywoodSpecification for limits of defects for the classification of plywood by appearance
BS 6566-7:1985. PlywoodSpecification for classification of resistance to fungal decay and wood borer attack
BS 6566-8:1985. PlywoodSpecification for bond performance of veneer plywood
BS 6567:1985, ISO 4753-1983. Specification for ends of fasteners with external metric ISO thread
BS 6568:1984, ISO 7498-1984. Description of basic reference model for open systems interconnection
BS 6568-1:1988, EN 27498:1989,ISO 7498-1984,ISO 7498:1984/Add. 1:1987. Reference model of open systems interconnectionBasic reference model (incorporating connectionless-mode transmission)
BS 6570:1986. Code of practice for the selection, care and maintenance of steel wire ropes
BS 6571-1:1985. Vehicle parking control equipment.Specification for coin operated clockwork parking meters
BS 6571-1:1989. Vehicle parking control equipmentSpecification for coin operated clockwork parking meters
BS 6571-2:1989. Vehicle parking control equipmentSpecification for electrically powered parking meters
BS 6571-3:1989. Vehicle parking control equipmentSpecification for pay and display equipment
BS 6571-4:1989. Vehicle parking control equipmentSpecification for barrier type parking control equipment
BS 6571-5:1989. Vehicle parking control equipmentGuide to the requirements for non-coin operated apparatus for use with parking control equipment
BS 6571-6:1996. Vehicle parking control equipmentSpecification for pay-on-foot parking control equipment
BS 6571-7:1997. Vehicle parking control equipmentSpecification for parking discs
BS 6571-8:1997. Vehicle parking control equipmentSpecification for pre-purchased parking vouchers
BS 6572:1985. Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water
BS 6573:1985, ISO 5010-1984. Specification for steering capability of rubber tyred earth-moving machines
BS 6574:1985, ISO 8152-1984. Guide to training of mechanics concerned with the operation and maintenance of earth-moving machinery
BS 6575:1985. Specification for fire blankets
BS 6576:1985. Code of practice for installation of chemical damp-proof courses
BS 6576:2005+A1:2012. Code of practice for diagnosis of rising damp in walls of buildings and installation of chemical damp-proof courses
BS 6577:1985. Specification for mastic asphalt for building (natural rock asphalt aggregate)
BS 6578-1:1985, ISO 7376/1-1984. Laryngoscopic fittingsSpecification for hook-on type handle-blade fittings
BS 6578-2:1985, ISO 7376/2-1984. Laryngoscopic fittingsSpecification for screw threads for miniature electric lamps and sockets
BS 6579-1:1985. Safety fences and barriers for highways.Specification for components for tensioned corrugated beam safety fence on Z posts
BS 6579-1:1988. Safety fences and barriers for highwaysSpecification for components for tensioned corrugated beam safety fence on Z posts
BS 6579-3:1988. Safety fences and barriers for highwaysSpecification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence
BS 6579-4:1990. Safety fences and barriers for highwaysSpecification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence
BS 6579-5:1986. Safety fences and barriers for highwaysSpecification for open box beam safety fence (single height)
BS 6579-6:1988. Safety fences and barriers for highwaysSpecification for components for open box beam safety fence (double height)
BS 6579-7:1989. Safety fences and barriers for highwaysSpecification for components for untensioned corrugated beam safety fence
BS 6579-8:1985. Safety fences and barriers for highways.Specification for concrete safety barriers
BS 6579-8:1987. Safety fences and barriers for highwaysSpecification for concrete safety barriers
BS 658:1962. Specification for apparatus for the determination of distillation range (including flasks and receivers)
BS 658:1989. Specification for apparatus for the determination of distillation range (including flasks and receivers)
BS 6580:1985. Specification for corrosion inhibiting, engine coolant concentrate ('antifreeze')
BS 6580:1992. Specification for corrosion inhibiting, engine coolant concentrate ('antifreeze')
BS 6580:2010. Specification for corrosion inhibiting, engine coolant concentrate ("antifreeze")
BS 6581:1985, IEC 60694:1980. Specification for common requirements for high-voltage switchgear and controlgear standards
BS 6581:1995. Common clauses for high-voltage switchgear and controlgear standards
BS 6582:1985. Specification for continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
BS 6582:2000. Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
BS 6583:1985. Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)
BS 6584:1985, ISO 4198-1984. Guide for comparative testing of performance of detergents for hand dishwashing
BS 6585:1985, ISO 7535-1984. Guide for comparative testing of performance of detergents for domestic machine dishwashing
BS 6586-1:1985. Rigid polyurethane (PUR) foam produced by the press injection methodSpecification for PUR foam for insulated panels for transport containers and insulated vehicle bodies
BS 6586-1:1993. Rigid polyurethane (PUR) foam produced by the press injection methodSpecification for PUR foam for insulated panels for transport containers and insulated vehicles bodies
BS 6587:1985. Method of acceptance inspection for fasteners
BS 6588:1985. Specification for Portland pulverized-fuel ash cement
BS 6588:1991. Specification for Portland pulverized-fuel ash cements
BS 6588:1996. Specification for Portland pulverized-fuel ash cements
BS 6590:1985, ISO 6898-1984. Specification for capacity ratings and dimensions of power presses, mechanical open front type
BS 6591:1985, ISO 5612-1984. Specification for scraper bars for chain conveyors for mining
BS 6592:1985, ISO 5613-1984. Specification for drive sprocket assemblies for chain conveyors for mining
BS 6593:1985+A1:2009. Code of practice for On-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
BS 6594-1:1985, ISO 4296/1-1984. Sampling of manganese ores.Methods for increment sampling
BS 6594-2:1985, ISO 4296/2-1983. Sampling of manganese ores.Methods for preparation of samples
BS 6595:1985. Specification for safety requirements for baby nests
BS 6596:1985, ISO 7751-1983. Specification for ratios of proof and burst pressure to design working pressure for rubber and plastics hoses and hose assemblies
BS 6596:1992, ISO 7751:1991. Specification for ratios of proof and burst pressure to design working pressure for rubber and plastics hoses and hose assemblies
BS 6597:1985, ISO 1307-1983. Specification for rubber and plastics hoses: internal diameters and tolerances and tolerances on length
BS 6598:1985, ISO 4695-1984. Method for determination of reducibility of iron ores
BS 6599:1985, ISO 4700:1983. Method for determination of crushing strength of iron ore pellets
BS 66 & 99:1970. Specification for cast copper alloy pipe fittings for use with screwed copper tubes
BS 6600-1:1987. Outline dimensions of transformers and inductors for use in telecommunication and electronic equipmentSpecification for the outline dimensions of transformers and inductors using YEI-1 laminations
BS 6600-10:1985. Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment.Specification for the outline dimensions of transformers and inductors using the Q range of C-cores
BS 6601:1985, ISO 6260-1984. Specification for mail payment orders
BS 6602:1985, ISO 6166-1983. Specification for international securities identification numbering system (ISIN)
BS 6603:1985, ISO 6225-1:1984. Method for determination of castor oil glycerides content of raw, natural rubber by thin layer chromatography
BS 6604:1985. Code of practice for safe operation of starter batteries
BS 6605:1990. Specification for cross recesses for screws
BS 6606:1985, ISO 5500-1984. Methods for sampling oilseed residues
BS 6606:1987, ISO 5500-1986. Methods for sampling oilseed residues
BS 6607-1:1985, ISO 7388-1:1983. Tool shanks with 7/24 taper for automatic tool changers.Specification for shanks Nos. 40, 45, and 50
BS 6607-2:1985, ISO 7388-2:1984. Tool shanks with 7/24 taper for automatic tool changers.Specification for retention knobs for shanks Nos. 40, 45 and 50
BS 6607-3:1993, ISO 9270:1992. Tool shanks with 7/24 taper for automatic tool changers.Specification for tapers for spindle noses
BS 6607-4:1994, ISO 9524:1993. Tool shanks with 7/24 taper for automatic tool changers.Specification for functional dimensions of front faces of spindle holders for machine centres
BS 6608:1985. Specification for cattle hide leathers for upholstered furniture
BS 6609:1985, IEC 60789:1984. Methods of test for radionuclide imaging devices
BS 661:1969. Glossary of acoustical terms
BS 6610:1985. Specification for pozzolanic cement with pulverized-fuel ash as pozzolana
BS 6610:1991. Specification for Pozzolanic pulverized-fuel ash cement
BS 6610:1996. Specification for Pozzolanic pulverized-fuel ash cement
BS 6611:1985. Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
BS 6612:1985. Specification for graduated compression hosiery
BS 6613:1985, ISO 4863-1984. Methods for specifying characteristics of resilient shaft couplings
BS 6614:1985. Specification for safety devices and water supply connections for washing machines and dishwashers connected to the water supply mains
BS 6614:1991. Specification for safety devices and water supply connections for washing machines, dishwashers and tumbler dryers connected to the water supply mains
BS 6615:1985, ISO 8062-1984. Specification for dimensional tolerances for metal and metal alloy castings
BS 6615:1996, ISO 8062:1994. Specification for dimensional tolerances for metal and metal alloy castings
BS 6616:1986. Specification for paper and print for optical character recognition (OCR)
BS 6617-1:1985. Determination of decarburization in steelMethods for determining decarburization by microscopic and micro-hardness techniques
BS 6617-2:1987. Determination of decarburization in steelMethods for determining decarburization by chemical and spectrographic analysis techniques
BS 6618:1985, ISO 5990-1983. Specification for photographic grade potassium sulphite, 650 g/L aqueous solution
BS 6619:1985, ISO 7830-1983. Specification for flammability performance of safety film for still photography
BS 6620:1985, ISO 7805-1:1984. Guide for industrial plate screens of 3 mm thick and above
BS 6620-1:1991, ISO 7805-1:1984. Industrial plate screensGuide for screens of thickness 3 mm and above
BS 6620-2:1991, ISO 7805-2:1987. Industrial plate screensGuide for screens of thickness below 3 mm
BS 662-1:1979. Carbon disulphide for industrial use.Specification
BS 6621:1985, ISO 5687-1981. Method for determination of combine harvester capacity and unloading rate
BS 662-2:1978, ISO 3144:1974. Carbon disulphide for industrial useSampling and methods of test
BS 6622:1985. Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V
BS 6622:1991. Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V
BS 6622:1999. Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV
BS 6622:2007. Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods
BS 662-3:1979. Carbon disulphide for industrial useAdditional methods of test
BS 6623-1:1985. DTE/DCE interface connectors and pin assignments.Specification for 25-pin connector (ISO DIS 2110 and DAD 1)
BS 6623-2:1986. DTE/DCE interface connectors and pin assignments.Specification for 37-pin connector [identical with ISO/DIS 4902 and DAD 1]
BS 6623-3:1986. DTE/DCE interface connectors and pin assignments.Specification for 15-pin connector [identical with ISO/DIS 4903 and DAD 1]
BS 6623-4:1986, ISO 2593-1984. DTE/DCE interface connectors and pin assignments.Specification for 34-pin connector
BS 6624:1985. Specification for personal weighing machines for domestic use
BS 6625-1:1985. Spectacle frames. Specification for general requirements
BS 6626:1985. Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV
BS 6626:2010. Maintenance of electrical switchgear and controlgear for voltages above 1 kV and up to and including 36 kV. Code of practice
BS 6627:1985, ISO 5123-1984. Recommendations for presentation of headers for microfiche of monographs and serials
BS 6628:1985, IEC 60806:1984. Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
BS 6629:1985. Specification for optical performance of high-visibility garments and accessories for use on the highway
BS 6630:1985, ISO 4645-1984. Method for identification of antidegradants in rubber and rubber products by thin layer chromatography
BS 6631:1985, ISO 6807-1984. Specification for rubber hoses and hose assemblies for rotary drilling and vibration applications
BS 6632:1985, ISO 4867:1984. Method for measurement and reporting of shipboard vibration data
BS 6633:1985, ISO 4868:1984. Method for measurement and reporting of local vibration data of ship structures and equipment
BS 6634:1985, ISO 6954:1984. Guide for overall evaluation of vibration in merchant ships
BS 6635:1985. Specification for saddle trees made from wood
BS 6635:2003. Manufacture of saddle trees made from wood. Specification
BS 6636-1:1985, ISO 7775/1-1984. Message types for securities.Specification for messages for receipt/delivery
BS 6636-2:1987, ISO 7775-2:1986. Message types for securities.Specification for messages for orders to buy/sell
BS 6637:1985, ISO 445-1984. Glossary of terminology for pallets for materials handling
BS 6638-1:1987, ISO 7480-1984. Guide to transmission signal quality at DTE/DCE interfaces.Start-stop signal quality
BS 6638-2:1989, ISO 9543:1989. Guide to transmission signal quality at DTE/DCE interfacesSynchronous transmission
BS 6639:1990, ISO 8480:1987. Guide to DTE/DCE interface control operation using the 25 pole connector
BS 6640-1:1987. Guide to arrangements for DTE to DTE physical connectionGeneral arrangements for DTE to DTE physical connection using V.24 and X.24 interchange circuits
BS 6640-2:1987, ISO 8481-1986. Guide to arrangements for DTE to DTE physical connectionDTE to DTE physical connection using X.24 interchange circuits with DTE provided timing
BS 6641:1985, IEC 60788:1984. Glossary of medical radiology terms
BS 6642:1985. Specification for disposable plastics refuse sacks made from polyethylene
BS 6643-1:1985. Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers')Specification for procedure and materials
BS 6643-2:1985. Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers')Specification for powder refill charges
BS 6644:1986. Specification for installation of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd and 3rd family gases)
BS 6644:1990. Specification for installation of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd and 3rd family gases)
BS 6644:1991. Specification for installation of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd and 3rd family gases)
BS 6644:2005+A1:2008. Specification for installation of gas-fired hot water boilers of rated inputs of between 70kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
BS 6644:2011. Specification for the installation and maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
BS 6645:1985. Method for determination of alkali solubility of flax materials
BS 6646:1985. Method for determination of ash of textiles
BS 6647:1985, IEC 60790:1984. Guide to oscilloscopes and peak voltmeters for impulse tests
BS 6648:1986. Methods for wet ashing of textile materials for subsequent determination of metal content
BS 6649:1985. Specification for clay and calcium silicate modular bricks
BS 6650:1985. Code of practice for control of the operation of a computer
BS 6651:1985. Code of practice for protection of structures against lightning
BS 6651:1990. Code of practice for protection of structures against lightning
BS 6651:1992. Code of practice for protection of structures against lightning
BS 6651:1999. Code of practice for protection of structures against lightning
BS 6652:1985. Specification for packagings resistant to opening by children
BS 6652:1989. Specification for packagings resistant to opening by children
BS 6653:1985, IEC 60776:1983. Method for expression of the properties of logic analyzers
BS 6654:1985. Method for determination of the electrical resistivity of textile floor coverings
BS 6655:1986, EN 26189:1991,ISO 6189:1983. Specification for pure tone air conduction threshold audiometry for hearing conservation purposes
BS 6656:1986. Guide to prevention of inadvertent ignition of flammable atmospheres by radio-frequency radiation
BS 6656:1991. Guide to prevention of inadvertent ignition of flammable atmospheres by radio-frequency radiation
BS 6656:2002. Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
BS 6657:1986. Guide for prevention of inadvertent initiation of electro-explosive devices by radio-frequency radiation
BS 6657:1991. Guide to prevention of inadvertent initiation of electro-explosive devices by radio-frequency radiation
BS 6657:2002. Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide
BS 6658:1985. Specification for protective helmets for vehicle users
BS 6659-1:1986. Producing and assessing changes in surface structure and colour of textile floor coveringsMethod for assessment of the changes
BS 6659-2:1986. Producing and assessing changes in surface structure and colour of textile floor coveringsMethod for fatiguing using the hexapod tumbler tester
BS 6660:1985. Guide to setting up and maintaining micrographics units
BS 6660-1:2005. Guide to setting up and maintaining micrographics and digital imaging unitsMicrographics
BS 6661:1986. Guide for design, construction and maintenance of single-skin air supported structures
BS 6662:1985, IEC 60816:1984. Guide to methods of measurement of short duration transients on low voltage power and signal lines
BS 6663:1986. Methods for determination of crimp rigidity of textured nylon yarns
BS 6664-4:1991. Flashpoint of petroleum and related productsMethod for determination of flashpoint (rapid equilibrium method)
BS 6664-5:1990, ISO 2719:1988. Flashpoint of petroleum and related products.Method for determination of flashpoint by Pensky-Martens closed tester
BS 6665:1985, ISO 3993-1984. Method for determination of density or relative density of liquefied petroleum gases and other light hydrocarbons by pressure hydrometer method
BS 6667-1:1985, IEC 60801-1:1984. Electromagnetic compatibility for industrial-process measurement and control equipmentGeneral introduction
BS 6667-2:1985, IEC 60801-2:1984. Electromagnetic compatibility for industrial-process measurement and control equipment.Method of evaluating susceptibility to electrostatic discharge
BS 6667-3:1985, IEC 60801-3:1984. Electromagnetic compatibility for industrial-process measurement and control equipmentMethod of evaluating susceptibility to radiated electromagnetic energy
BS 6668-1:1986. Textile lifting slingsSpecification for lifting slings for general service made from certain natural and man-made fibre ropes
BS 6668-2:1987. Textile lifting slingsSpecification for roundslings made of man-made fibre for general service
BS 6669-1:1986, ISO 4522-1:1985. Methods of test for electroplated silver and silver alloy coatingsDetermination of coating thickness
BS 6669-2:1986, ISO 4522-2:1985. Methods of test for electroplated silver and silver alloy coatingsAdhesion tests
BS 6669-3:1989, ISO 4522-3:1988. Methods of test for electroplated silver and silver alloy coatingsDetection of residual salts
BS 667:1968. Specification for portable photoelectric photometers
BS 667:1996. Specification for illuminance meters
BS 667:2005. Illuminance meters. Requirements and test methods
BS 6670-1:1986, ISO 4524-1:1985. Methods of test for electroplated gold and gold alloy coatingsDetermination of coating thickness
BS 6670-2:1986, ISO 4524/2-1985. Methods of test for electroplated gold and gold alloy coatingsEnvironmental tests
BS 6670-4:1986, ISO 4524-4:1985. Methods of test for electroplated gold and gold alloy coatingsDetermination of gold content
BS 6670-5:1986, ISO 4524-5:1985. Methods of test for electroplated gold and gold alloy coatingsAdhesion tests
BS 6671:1986. Specification for thermal packs and drink coolers
BS 6672-1:1986. Insulated domestic food containersSpecification for vacuum ware and insulated flasks, jars and jugs
BS 6672-2:1986. Insulated domestic food containersSpecification for insulated bags and boxes
BS 6673:1986. Specification for polyester glass mat sheets for electrical purposes
BS 6674:1985, ISO 7550-1985. Specification for disposable micropipettes
BS 6675:1986. Specification for servicing valves (copper alloy) for water services
BS 6676-1:1986. Thermal insulation of cavity walls using man-made mineral fibre batts (slabs)Specification for man-made mineral fibre batts (slabs)
BS 6676-2:1986. Thermal insulation of cavity walls using man-made mineral fibre batts (slabs)Code of practice for installation of batts (slabs) filling the cavity
BS 6677-1:1986. Clay and calcium silicate pavers for flexible pavementsSpecification for pavers
BS 6677-2:1986. Clay and calcium silicate pavers for flexible pavementsCode of practice for design of lightly trafficked pavements
BS 6677-3:1986. Clay and calcium silicate pavers for flexible pavementsMethod for construction of pavements
BS 6678:1986. Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding
BS 6679:1985, EN 201:1985. Specification for technical safety requirements for the design and construction of injection moulding machines for plastics and rubber
BS 6680:1985. Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp
BS 6681:1986. Specification for malleable cast iron
BS 6682:1986, ISO 7441-1984. Method for the determination of bimetallic corrosion in outdoor exposure corrosion tests
BS 6683:1985. Guide to installation and use of valves
BS 6684:1987. Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking
BS 6684:1989. Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking
BS 6685:1986, ISO 7131-1984. Glossary of terms for loaders used for earth-moving
BS 6686-1:1986, IEC 60704-1:1982. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliancesGeneral requirements for testing
BS 6686-2-2.1:1990. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsVacuum cleaners
BS 6686-2-2.2:1990, IEC 60704-2-2:1987. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsForced draught convection heaters
BS 6686-2-2.3:1991. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsDishwashers
BS 6686-2-2.4:1991, IEC 60704-2-4:1989. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsWashing machines and spin extractors
BS 6686-2-2.5:1991, IEC 60704-2-5:1989. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirementsRoom heaters of the storage type
BS 6687:1986. Specification for electrolytically zinc coated steel flat rolled products
BS 6688:1986. Method for specifying requirements for low voltage power supplies, switching type, d.c. output
BS 6689:1986, ISO 6980-1984. Specification for reference beta radiations for calibrating dosemeters and doseratemeters and for determining their response as a function of beta radiation energy
BS 6690:1986, ISO 8211-1985. Specification for a data descriptive file for information interchange
BS 669-1:1984. Flexible hoses, end fittings and sockets for gas burning appliances.Specification for strip-wound flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases
BS 669-1:1989. Flexible hoses, end fittings and sockets for gas burning appliancesSpecification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases
BS 6691-1:1986. Fume from welding and allied processesGuide to methods for the sampling and analysis of particulate matter
BS 6691-2:1986. Fume from welding and allied processesGuide to methods for the sampling and analysis of gases
BS 669-2:1988. Flexible hoses, end fittings and sockets for gas burning appliancesSpecification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st and 2nd family gases
BS 669-2:1995. Flexible hoses, end fittings and sockets for gas burning appliancesSpecification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases
BS 669-2:1997. Flexible hoses, end fittings and sockets for gas burning appliancesSpecification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases
BS 6692-1:1986, ISO 6937/1-1983. Coded character sets for text communication.General introduction
BS 6692-2:1986, ISO 6937/2-1983. Coded character sets for text communication.Specification for Latin alphabetic and non-alphabetic graphic characters
BS 6692-2:1990, ISO 6937-2:1983. Coded character sets for text communication.Specification for Latin alphabetic and non-alphabetic graphic characters
BS 6693-1:1986. Diffusible hydrogenMethod for determination of hydrogen in manual metal-arc weld metal using 3 day collection
BS 6693-2:1986. Diffusible hydrogenMethod for determination of hydrogen in manual metal-arc weld metal
BS 6693-3:1988. Diffusible hydrogenPrimary method for the determination of diffusible hydrogen in manual metal-arc ferritic steel weld metal
BS 6693-4:1988. Diffusible hydrogenPrimary method for the determination of diffusible hydrogen in submerged-arc ferritic steel weld metal
BS 6693-5:1988. Diffusible hydrogenPrimary method for the determination of diffusible hydrogen in MIG, MAG, TIG or cored electrode ferritic steel weld metal
BS 6694:1986. Specification for safety of power-driven industrial brushes
BS 6695:1986, ISO 7341-1985. Specification for nostro accounts reconciliation in banking
BS 6696:1986, ISO 4787:1984. Methods for use and testing of capacity of volumetric glassware
BS 6697:1986. Methods of test for electrohydraulic proportional control valves
BS 6699:1986. Specification for ground granulated blastfurnace slag for use with Portland cement
BS 6699:1992. Specification for ground granulated blastfurnace slag for use with Portland cement
BS 67:1969. Specification for ceiling roses
BS 67:1987. Specification for ceiling roses
BS 6700:1987. Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages
BS 6700:1997. Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages
BS 6700:2006+A1:2009. Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages Specification
BS 6701:1994. Code of practice for installation of apparatus intended for connection to certain telecommunication systems
BS 6701:2010. Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance
BS 6701-1:1986. Code of practice for installation of apparatus intended for connection to certain telecommunication systems.General recommendations
BS 6701-1:1990. Code of practice for installation of apparatus intended for connection to certain telecommunication systems.General recommendations
BS 6701-2:1987. Code of practice for installation of apparatus intended for connection to certain telecommunication systems.Installation of switching apparatus that may be connected to certain analogue telecommunication systems
BS 6702:1986, EN 60400:1985,IEC 60400:1982. Specification for lampholders for tubular fluorescent lamps and starterholders
BS 6702:1991, EN 60400:1989. Specification for lampholders for tubular fluorescent lamps and starterholders
BS 6703:1988. Specification for manually operated torque wrenches and drivers
BS 6704:1987. Code of Practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines
BS 6704:1996. Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines
BS 6705:1987. Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines
BS 6706:1986. Specification for disposable glass serological pipettes
BS 6707:1986. Specification for intruder alarm systems for consumer installation
BS 6708:1977. Specification for trailing cables for mining purposes
BS 6708:1991. Specification for flexible cables for use at mines and quarries
BS 6708:1998. Flexible cables for use at mines and quarries
BS 6709:1986. Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp
BS 6710:1987. Specification for dimensions of chain wheel tooth forming tools
BS 6711-1:1986, ISO 4791-1:1985. Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silicaNames for items of apparatus
BS 6712-1:1986, ISO 8226/1-1985. Measurement of hygroexpansivity of paper and boardMethod for measurement of hygroexpansivity up to a maximum relative humidity of 68%
BS 6712-1:1995, ISO 8226-1:1994. Measurement of hygroexpansivity of paper and boardMethod for the measurement of hygroexpansivity up to a maximum relative humidity of 68%
BS 6712-2:1991, ISO 8226-2:1990. Measurement of hygroexpansivity of paper and boardMethod for measurement of hygroexpansivity up to a maximum relative humidity of 86%
BS 6713-1:1986, EN 26184-1:1991,ISO 6184-1:1985. Explosion protection systemsMethod for determination of explosion indices of combustible dusts in air
BS 6713-2:1986, EN 26184-2:1991,ISO 6184-2:1985. Explosion protection systemsMethod for determination of explosion indices of combustible gases in air
BS 6713-3:1986, EN 26184-3:1991,ISO 6184-3:1985. Explosion protection systemsMethod for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
BS 6713-4:1986, EN 26184-4:1991,ISO 6184-4:1985. Explosion protection systemsMethod for determination of efficacy of explosion suppression systems
BS 6714:1986. Specification for installation of decorative log and other fuel effect appliances (1st, 2nd and 3rd family gases)
BS 6715:1987. Specification for chamois leather
BS 6715:1991. Specification for chamois leather
BS 6716:1986. Guide to properties and types of rubber
BS 6717:2001. Precast, unreinforced concrete paving blocks. Requirements and test methods
BS 6717-1:1986. Precast concrete paving blocksSpecification for paving blocks
BS 6717-1:1993. Precast concrete paving blocksSpecification for paving blocks
BS 6717-3:1989. Precast concrete paving blocksCode of practice for laying
BS 6719:1986. Guide to specifying user requirements for a computer-based system
BS 6720:1986. Specification for marking transit information on packages for distribution
BS 6721-10:1989, ISO 6437:1984. Sampling and analysis of copper and copper alloys.Method for determination of chromium in copper alloys: titrimetric method
BS 6721-11:1989, ISO 7266:1984. Sampling and analysis of copper and copper alloysMethod for determination of sulphur in copper and copper alloys: combustion titrimetric method
BS 6721-4:1986, ISO 4744-1984. Sampling and analysis of copper and copper alloysMethod for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6721-5:1986, ISO 4740-1985. Sampling and analysis of copper and copper alloysMethod for determination of zinc in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6721-6:1989, ISO 4741-1984. Sampling and analysis of copper and copper alloys.Method for determination of phosphorus in copper and copper alloys by spectrophotometry
BS 6721-7:1989, ISO 4742-1984. Sampling and analysis of copper and copper alloys.Method for determination of nickel in copper alloys: gravimetric method
BS 6721-8:1989, ISO 4743:1984. Sampling and analysis of copper and copper alloys.Method for determination of nickel in copper alloys: titrimetric method
BS 6721-9:1989, ISO 4749-1984. Sampling and analysis of copper and copper alloys.Method for determination of lead in copper alloys by flame atomic absorption spectrophotometry
BS 6722:1986. Recommendations for dimensions of metallic materials
BS 6723:1985, ISO 5964-1985. Guide to establishment and development of multilingual thesauri
BS 6724:1986. Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire
BS 6724:1990. Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire
BS 6724:1997+A3:2008. Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire
BS 6725:1986, IEC 60814:1985. Method for determination of water in liquid dielectrics by automatic coulometric Karl Fischer titration
BS 6726:1986. Specification for festoon and temporary lighting cables and cords
BS 6726:1991. Specification for festoon and temporary lighting cables and cords
BS 6726:1998. Specification for festoon and temporary lighting cables and cords
BS 6727:1987, ISO 6093-1985. Specification for representation of numerical values in character strings for information interchange
BS 6728-1:1986. Thermoplastics hot water bottlesSpecification for hot water bottles manufactured from PVC compounds
BS 6728-2:1993. Thermoplastics hot water bottlesSpecification for hot water bottles manufactured from polyolefin materials
BS 6729:1987. Method for determination of the dynamic fracture toughness of metallic materials
BS 673:1984, ISO 1180:1983. Specification for shanks for pneumatic tools and fitting dimensions of chuck bushings
BS 6730:1986. Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water
BS 6731:1988, EN 111:1982. Specification for wall hung hand rinse basins. Connecting dimensions
BS 6732:1987, EN 50043:1985. Specification for low-voltage switchgear and controlgear for industrial use. Size numbers and gauges for flat connections
BS 6733:1987, EN 50051:1985. Specification for low-voltage switchgear and controlgear for industrial use. Requirements applicable to terminals concerning cross-sections of connectable conductors
BS 6734:1986. Method for determination of the antimicrobial efficacy of disinfectants for veterinary and agricultural use
BS 6734:2004. Antimicrobial efficacy of disinfectants for veterinary and agricultural use. Method
BS 6735:1987. Specification for reach volumes for the location of controls on agricultural tractors and machinery
BS 6736:1986. Code of practice for hand signalling for use in agricultural operations
BS 6737:1986, IEC 60809:1985. Specification for dimensional, electrical and luminous requirements for lamps for road vehicles
BS 6738:1986, ISO 6357-1985. Recommendations for presentation of spine titles
BS 6739:1986. Code of practice for instrumentation in process control systems: installation design and practice
BS 6739:2009. Code of practice for instrumentation in process control systems: installation design and practice
BS 6740:1987, ISO 4291-1985. Method for determining departures from roundness by measuring variations in radius
BS 6741-1:1987, ISO 4287-1:1984. Glossary of surface roughness termsSurface and its parameters
BS 6741-2:1987, ISO 4287-2:1984. Glossary of surface roughness termsMeasurement of surface roughness parameters
BS 6742-1:1987, EN 50050:1986. Electrostatic painting and finishing equipment using flammable materialsElectrostatic painting and finishing equipment using flammable materials. Specification for hand-held spray guns and associated apparatus
BS 6742-2:1987, EN 50053-1:1987. Electrostatic painting and finishing equipment using flammable materialsSpecification for selection, installation and use of hand-held paint spray guns (energy limit of 0,24 mJ) and associated apparatus
BS 6742-3:1990, EN 50053-2:1989. Electrostatic painting and finishing equipment using flammable materialsElectrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held powder spray guns (energy limit of 5 mJ) and their associated apparatus
BS 6742-4:1990, EN 50053-3:1989. Electrostatic painting and finishing equipment using flammable materialsElectrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held flock spray guns (energy limit of 0,24 mJ or 5 mJ) and their associated apparatus
BS 6743:1987. Specification for performance of handles and handle assemblies attached to cookware
BS 6744:1986. Specification for austenitic stainless steel bars for the reinforcement of concrete
BS 6744:2001+A2:2009. Stainless steel bars for the reinforcement of and use in concrete. Requirements and test methods
BS 6745-1:1986. Portable lead-acid cells and batteries.Specification for performance, design and construction of valve regulated sealed type
BS 6746:1984. Specification for PVC insulation and sheath of electric cables
BS 6746:1990. Specification for PVC insulation and sheath of electric cables
BS 6746C:1969. Colour chart for insulation and sheath of electric cables
BS 6746C:1993. Colour chart for insulation and sheath of electric cables
BS 6747:1987. Specification for orthodontic resins
BS 6748:1986+A1:2011. Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
BS 6749-1:1986, ISO 7919/1-1986. Measurements and evaluation of vibration on rotating shaftsGuide to general principles
BS 675:1953. Specification for sugar flasks
BS 6750:1986. Specification for modular coordination in building
BS 6751:1986. Guide for protection of machine tools intended for use in extreme environmental conditions
BS 6752:1986. Specification for Bourdon tube pressure gauges used in welding, cutting and related processes
BS 6753:1986. Specification for shotbolts (solenoid operated) for guarding machinery
BS 6754:1986, ISO 7183:1986. Specifications and testing of compressed air dryers
BS 6755-1:1986. Testing of valvesSpecification for production pressure testing requirements
BS 6755-2:1987. Testing of valvesSpecification for fire type-testing requirements
BS 6756:1986. Specification for fibre rope cargo nets
BS 6757:1986. Methods of test for thermal performance of solar collectors
BS 6758:1987, IEC 60558:1982. Specification for type C helical video tape recorders
BS 6759-1:1984. Safety valvesSpecification for safety valves for steam and hot water
BS 6759-2:1984. Safety valvesSpecification for safety valves for compressed air or inert gases
BS 6759-3:1984. Safety valvesSpecification for safety valves for process fluids
BS 676:1982. Specification for flasks with graduated necks (phenols type)
BS 6762-2:1991. Services for leisure accommodation vehicles and transportable accommodation unitsCode of practice for the installation of solid fuel fired heating in park homes and transportable accommodation units
BS 6762-3:1989, ISO 7420:1987. Services for leisure accommodation vehicles and transportable accommodation unitsSpecification for oil-fired heating systems
BS 6764:1991, ISO 8817:1990. Specification for habitation and stability requirements for leisure accommodation vehicles: leisure homes
BS 6765-3:1989, ISO 8818:1988. Leisure accommodation vehicles. CaravansSpecification for 12 V direct current extra low voltage electrical installations
BS 6765-4:1987. Leisure accommodation vehicles. CaravansSpecification for undergear
BS 6767-1:1992. Transportable accommodation unitsRecommendations for design and construction
BS 6767-1:1999. Transportable accommodation unitsRecommendations for design and construction of the basic unit
BS 6767-2:1998. Transportable accommodation unitsRecommendations for design and installation of services and fittings with guidance on transportation, siting and aspects relating to habitation
BS 6770:1988. Guide for exterior colours for park homes (mobile homes), holiday caravans and transportable accommodation units
BS 6776:1986, EN 60238:1986,IEC 60238:1982. Specification for Edison screw lampholders
BS 6776:1990, EN 60238:1989. Specification for Edison screw lampholders
BS 6777-1:1986, ISO 4165-1979. Electrical connections for agricultural machinery.Specification for double-pole connectors
BS 6778:1986. Specification for fireguards for use with portable, free-standing or wall-mounted heating appliances
BS 6779-1:1987. Parapets for vehicle containment on highways.Specification for parapets of metal contruction
BS 6779-1:1989. Highway parapets for bridges and other structuresSpecification for parapets of metal construction
BS 6779-1:1992. Highway parapets for bridges and other structuresSpecification for vehicle containment parapets of metal construction
BS 6779-1:1998. Highway parapets for bridges and other structuresSpecification for vehicle containment parapets of metal construction
BS 6779-2:1991. Highway parapets for bridges and other structuresSpecification for vehicle containment parapets of concrete construction
BS 6779-3:1994. Highway parapets for bridges and other structuresSpecification for vehicle containment parapets of combined metal and concrete construction
BS 6779-4:1999. Highway parapets for bridges and other structuresSpecification for parapets of reinforced and unreinforced masonry construction
BS 6780:1986. Specification for through thickness reduction of area of steel plates and wide flats
BS 6781:1986, EU 169-1985. Specification for continuously organic coated steel flat products
BS 6782-1:1987, ISO 3251-1974. Binders for paintsMethod for determination of volatile and non-volatile content
BS 6782-12:1997, ISO 6271:1997. Binders for paintsEstimation of colour of clear liquids by the platinum-cobalt scale
BS 6782-14:1999, ISO 13885-1:1998. Binders for paintsGel permeation chromatography (GPC) with tetrahydrofuran (THF) as eluent
BS 6782-2:1987, ISO 3681-1983. Binders for paintsMethod for determination of saponification value (titrimetric method)
BS 6782-3:1987, ISO 3682-1983. Binders for paintsMethod for determination of acid value (titrimetric method)
BS 6782-4:1987, ISO 4629-1978. Binders for paintsMethod for determination of hydroxyl value (titrimetric method)
BS 6782-5:1987, ISO 4630-1981. Binders for paintsMethod for estimation of colour of clear liquids by the Gardner colour scale
BS 6782-5:1997, ISO 4630:1997. Binders for paintsMethod for estimation of colour of clear liquids by the Gardner colour scale
BS 6782-6:1987, ISO 4625-1980. Binders for paintsMethod for determination of softening point (ring and ball method)
BS 6782-7:1995. Binders for paintsMethod for determination of free-formaldehyde content of amino resins (sodium sulfite titrimetric method)
BS 6783-1:1986, ISO 6351-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc in nickel by flame atomic absorption spectrometry
BS 6783-10:1990, ISO 7528:1989. Sampling and analysis of nickel, ferronickel and nickel alloys.Method for determination of iron in nickel alloys (titrimetric method using potassium dichromate)
BS 6783-11:1990, ISO 9389:1989. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for the determination of cobalt in nickel alloys (potentiometric titration method using potassium hexacyanoferrate (III))
BS 6783-12:1992, ISO 9388:1992. Sampling and analysis of nickel, ferronickel and nickel alloys.Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption spectrometry
BS 6783-13:1992, ISO 11400:1992. Sampling and analysis of nickel, ferronickel and nickel alloys.Method for the determination of phosphorus in nickel, ferronickel and nickel alloys by phosphovanadomolybdate molecular absorption spectrometry
BS 6783-14:1994, ISO 11436:1993. Sampling and analysis of nickel, ferronickel and nickel alloys.Method for the determination of total boron content of nickel, and nickel alloys by curcumin molecular absorption spectrometry
BS 6783-2:1986, EN 26352:1991,ISO 6352-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of nickel in ferronickel (dimethylglyoxime gravimetric method)
BS 6783-3:1986, EN 27520:1991,ISO 7520-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of cobalt in ferronickel by flame atomic absorption spectrometry
BS 6783-4:1986, ISO 7523-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium in nickel by electrothermal atomic absorption spectrometry
BS 6783-5:1986, ISO 7524-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
BS 6783-6:1986, ISO 7525-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of sulphur in nickel by methylene blue molecular absorption spectrometry after generation of hydrogen sulphide
BS 6783-7:1986, EN 27526:1991,ISO 7526-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
BS 6783-8:1986, EN 27527:1991,ISO 7527-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of sulphur in nickel, ferronickel and nickel alloys by iodimetric titration after induction furnace combustion
BS 6783-9:1986, EN 28343:1991,ISO 8343-1985. Sampling and analysis of nickel, ferronickel and nickel alloysMethod for determination of silicon in ferronickel (gravimetric method)
BS 6784:1986. Specification for rubber hoses and hose assemblies for automobile power steering systems
BS 6785:1986. Code of practice for solar heating systems for swimming pools
BS 6786:1986, IEC 60424:1973. Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
BS 6787:1987, ISO 8249-1985. Method for determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes
BS 6788-1:1986. Neurosurgical implantsSpecification for sterile, single-use hydrocephalus shunts and components
BS 6788-2:1990. Neurosurgical implantsSpecification for marking and packaging of implantable neural stimulators
BS 6788-3:1990. Neurosurgical implantsSpecification for self-closing intracranial aneurysm clips
BS 6789-1:1984. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operatorsSpecification for general requirements
BS 6789-2:1984. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operatorsSpecification for apparatus with loudspeaking facilities
BS 6789-3.1:1985. Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, auto-answering and auto-clearing facilitiesSpecification for auto-calling facilities
BS 6789-3.2:1987. Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, auto-answering and auto-clearing facilitiesSpecification for auto-answering and auto-clearing facilities
BS 6789-6.1:1986. Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatusApparatus having maximum allowable impairments
BS 6789-6.2:1989. Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatusApparatus having less than maximum allowable impairments
BS 6789-7:1988. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operatorsSpecification for apparatus with call barring facilities
BS 679:1959. Specification for filters for use during welding and similar industrial operations
BS 679:1989. Specification for filters, cover lenses and backing lenses for use during welding and similar operations
BS 6790:1987, EN 27491:1991,ISO 7491-1985. Method for determination of colour stability of dental polymeric materials
BS 6792:1986. Specification for agricultural trailer and trailed machinery drawbar jacks
BS 6793:1987. Specification for men's uniform shirts
BS 6794:1986, ISO 8002-1986. Method for reporting measured vibration data for land vehicles
BS 6795:1987. Specification for full sequence automatic control systems used on gas-fired appliances
BS 6796:1986, IEC 60868:1986. Specification for flickermeters
BS 6797:1986, IEC 60810:1986. Specification for performance requirements for lamps for road vehicles
BS 6798:1987. Specification for installation of gas-fired hot water boilers of rated input not exceeding 60 kW
BS 6798:2000. Specification for installation of gas-fired boilers of rated input not exceeding 70 kW net
BS 6798:2009. Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kW net
BS 6799:1986. Code of practice for wire-free intruder alarm systems
BS 6800:1986. Specification for home and personal security devices
BS 680-1:1944. Specification for roofing slatesImperial units
BS 6801:1986, IEC 60858:1986. Method for determination of image distortion of electro-optical X-ray image intensifiers
BS 680-2:1971. Specification for roofing slatesMetric units
BS 6802:1987, IEC 60867:1986. Specification for unused insulating liquids based on synthetic aromatic hydrocarbons
BS 6803-1:1987. Vehicle security alarm systems.Specification for systems installed as original vehicle equipment
BS 6803-1:1993. Vehicle security alarm systemsSpecification for installed systems
BS 6803-2:1986. Vehicle security alarm systems.Code of practice for systems installed after vehicle marketing
BS 6803-3:1990. Vehicle security alarm systemsCode of practice for the protection of vehicles and goods in transit
BS 6804:1986. Code of practice for social alarm systems
BS 6805-1:1987, EN 27574-1:1988,ISO 7574-1:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipmentGlossary of terms
BS 6805-2:1987, EN 27574-2:1988,ISO 7574-2:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipmentMethod for determining and verifying stated values for individual machines
BS 6805-3:1987, EN 27574-3:1988,ISO 7574-3:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipmentMethod for determining and verifying stated values for batches of machines using a simple (transition) method
BS 6805-4:1987, EN 27574-4:1988,ISO 7574-4:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipmentMethods for determining and verifying stated values for batches of machines
BS 6806:2002. Textiles. Determination of formaldehyde. Method for the determination of total and free (water extraction method) formaldehyde using chromotropic acid
BS 6806-1:1987. Formaldehyde in textiles. Method for determination of total formaldehyde
BS 6806-2:1987. Formaldehyde in textiles. Method for determination of 'free' formaldehyde
BS 6806-3:1987. Formaldehyde in textilesMethod for determination of released formaldehyde
BS 6807:1986. Methods of test for the ignitability of mattresses with primary and secondary sources of ignition
BS 6807:1990. Methods of test for assessment of the ignitability of mattresses, divans and bed bases with primary and secondary sources of ignition
BS 6807:1996. Assessment of the ignitability of mattresses, upholstered divans and upholstered bed bases with flaming types of primary and secondary sources of ignition
BS 6807:2006. Methods of test for assessment of ignitability of mattresses, upholstered divans and upholstered bed bases with flaming types of primary and secondary sources of ignition
BS 6808-1:1987. Coordinate measuring machinesGlossary of terms
BS 6808-2:1987. Coordinate measuring machinesMethods for verifying performance
BS 6808-3:1989. Coordinate measuring machinesCode of practice
BS 6809:1987. Method for calibration of radiometers for use in fire testing
BS 6810-1:1987. Determination of metals in textilesAnalysis by atomic absorption and colorimetric spectroscopy
BS 6810-2:2005. Determination of metals in textilesAnalysis by atomic emission spectroscopy
BS 6811-0:1987. Winding wires.General introduction and list of Parts
BS 6811-0:1993. Winding wiresGeneral introduction and list of Parts
BS 6811-1.1:1987. Winding wires. Basic dimensionsSpecification for diameters of conductors for round winding wires
BS 6811-1-1.2:1987. Winding wires. Basic dimensions.Specification for overall diameters of enamelled round winding wires
BS 6811-2-2.1:1987, IEC 60851-1:1985. Winding wires. Methods of testGeneral test conditions and schedule of tests
BS 6811-2-2.2:1987, IEC 60851-2:1985. Winding wires. Methods of testDetermination of dimensions
BS 6811-2-2.3:1987, IEC 60851-3:1985. Winding wires. Methods of test.Mechanical properties
BS 6811-2-2.3:1992, IEC 60851-3:1985. Winding wires. Methods of testMechanical properties
BS 6811-2-2.5:1987, IEC 60851-5:1985. Winding wires. Methods of testElectrical properties
BS 6811-2-2.5:1992, IEC 60851-5:1988. Winding wires. Methods of testElectrical properties
BS 6811-2-2.6:1987, IEC 60851-6:1985. Winding wires. Methods of testThermal properties
BS 6811-3-3.1:1987. Winding wires. Specifications for particular types of round copper winding wires.Polyurethane base enamel with solderable properties. Class 130
BS 6811-3-3.1:1991. Winding wires. Specifications for particular types of round copper winding wires.Polyurethane base enamel with solderable properties. Class 130
BS 6811-3-3.2:1987. Winding wires. Specifications for particular types of enamelled round copper winding wiresPolyesterimide base enamel. Class 180
BS 6811-3-3.2:1990. Winding wires. Specifications for particular types of round copper winding wires.Polyesterimide base enamel. Class 180
BS 6811-3-3.3:1989. Winding wires. Specifications for particular types of round copper winding wires.Polyester or polyesterimide, coated with polyamide-imide enamel. Class 200
BS 6811-4-4.1:1991, IEC 60317-0-2:1990. Winding wires. Specifications for particular types of rectangular winding wires.General requirements
BS 6812-1:1987, ISO 6393-1985. Airborne noise emitted by earth-moving machineryMethod of measurement of exterior noise in a stationary test condition
BS 6812-2:1987, ISO 6394-1985. Airborne noise emitted by earth-moving machineryMethod of measurement at the operator's position in a stationary test condition
BS 6812-3:1991, ISO 6395:1988. Airborne noise emitted by earth-moving machineryMethod of measurement of exterior noise in dynamic test conditions
BS 6813:1987. Specification for trade cutlery for use with food
BS 6814:1987, EN 24104:1990,ISO 4104:1984. Specification for dental zinc polycarboxylate cements
BS 6815:1987, ISO 3630-1984. Specification for dental root canal instruments
BS 6816:1987, EN 23950:1989,ISO 3950:1984. Designation system for teeth and areas of the oral cavity
BS 6817:1987. Specification for ceramic denture teeth
BS 6817:1991. Specification for porcelain denture teeth
BS 6818-1:1987, ISO 8759-1:1985. Front-mounted linkage and power take-off for agricultural wheeled tractors.Specification for power take-off
BS 6818-2:1987, ISO 8759-2:1985. Front-mounted linkage and power take-off for agricultural wheeled tractors.Specification for front linkage
BS 6819:1987, ISO 8313-1986. Methods for measurement of tool forces and tipping loads of loaders used for earth-moving
BS 6820:1987, ISO 8653-1986. Method for measuring and designating the size of rings used in jewellery
BS 6821:1988. Methods for aerodynamic testing of dampers and valves
BS 6822:1987, ISO 8532-1986. Specification for format for transmission of certificate numbers of securities
BS 6823:1987, ISO 7133-1985. Glossary of terminology and content of commercial specifications for tractor-scrapers used for earth-moving, and their equipment
BS 6824:1987, ISO 3450-1985. Specification for performance and test of braking systems for wheeled earth-moving machinery
BS 6825-1:1987, ISO 6015/1-1986. Hydraulic excavators for earth-moving.Methods for measurement of tool forces
BS 6826:1987. Specification for linoleum and cork carpet sheet and tiles
BS 6827:1987, ISO 8455-1986. Guide to storage and transport of green coffee in bags
BS 6828-1:1987, EN 21797:1989,ISO 1797:1985. Dental rotary instrumentsSpecification for shanks
BS 6828-2:1987, EN 22157:1989,ISO 2157:1984. Dental rotary instrumentsSpecification for nominal sizes and designations
BS 6828-3:1987, EN 23823-1:1991,ISO 3823-1:1986. Dental rotary instrumentsSpecification for steel and carbide burs
BS 6828-4:1987, EN 23813-2:1991,ISO 3823-2:1986. Dental rotary instrumentsSpecification for steel and carbide finishing burs
BS 6828-5.1:1987, EN 26360-1:1989,ISO 6360-1:1985. Dental rotary instruments. Number coding systemSpecification for general characteristics
BS 6828-5-5.2:1987, ISO 6360-2:1986. Dental rotary instruments. Number coding systemSpecification for shape and specific characteristics
BS 6828-6:1987, EN 27711:1989,ISO 7711:1984. Dental rotary instrumentsSpecification for diamond instruments
BS 6828-7:1987, ISO 7786-1984. Dental rotary instruments.Specification for laboratory abrasive instruments
BS 6828-8.1:1987, EN 27787-1:1989,ISO 7787-1:1984. Dental rotary instruments. CuttersSpecification for steel laboratory cutters
BS 6828-8-8.2:1987, EN 27787-2:1990,ISO 7787-2:1984. Dental rotary instruments. CuttersSpecification for carbide laboratory cutters
BS 6828-9:1987, EN 28325:1990,ISO 8325:1985. Dental rotary instruments.Methods of test
BS 6829-0:1987. Analysis of surface active agents (raw materials).General introduction
BS 6829-0:1989. Analysis of surface active agents (raw materials).General introduction
BS 6829-0:1991. Analysis of surface active agents (raw materials)General introduction
BS 6829-1.1:1987, ISO 6844-1983. Analysis of surface active agents (raw materials). General methodsMethod for determination of mineral sulphate content
BS 6829-1.2:1988, ISO 4314-1977. Analysis of surface active agents (raw materials). General methodsMethod for determination of free alkalinity or free acidity
BS 6829-1.3:1988, ISO 4315-1977. Analysis of surface active agents (raw materials). General methodsMethod for determination of alkalinity
BS 6829-1.5:1990. Analysis of surface active agents (raw materials). General methodsMethods for determination of water content
BS 6829-1.6:1991, ISO 6839:1982. Analysis of surface active agents (raw materials). General methodsMethod for determination of solubility in water
BS 6829-1-1.4:1989. Analysis of surface active agents (raw materials). General methodsMethod for determination of the pH of an aqueous solution
BS 6829-2.1:1988. Analysis of surface active agents (raw materials). Alkane sulphonatesMethod for determination of total alkaline sulphonates content
BS 6829-2.3:1989, ISO 6121:1988. Analysis of surface active agents (raw materials). Alkane sulphonatesMethod for determination of alkane monosulphonates content
BS 6829-2-2.2:1987, ISO 6845-1982. Analysis of surface active agents (raw materials). Alkane sulphonates.Method for determination of mean relative molecular mass of alkane monosulphonates
BS 6829-3.1:1989, ISO 6841:1988. Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonatesMethod for determination of mean relative molecular mass
BS 6829-3-3.1:1987, ISO 6841-1983. Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates.Method for determination of mean relative molecular mass
BS 6829-4.2:1989, ISO 2268:1972. Analysis of surface active agents (raw materials). Ethylene oxide adducts.Method for determination of polyethylene glycols and non-ionic active matter contents
BS 6829-4.3:1990, ISO 2270:1989. Analysis of surface active agents (raw materials). Ethylene oxide adductsMethod for determination of oxyethylene groups
BS 6829-4.5:1989, ISO 4322-1977. Analysis of surface active agents (raw materials). Ethylene oxide adductsMethod for determination of sulphated ash
BS 6829-4.6:1988, ISO 4326-1980. Analysis of surface active agents (raw materials). Ethylene oxide adductsMethod for determination of hydroxyl value
BS 6829-4-4.1:1988, ISO 1065-1975. Analysis of surface active agents (raw materials). Ethylene oxide adducts.Methods for determinaton of cloud temperature (cloud point)
BS 6829-4-4.1:1991, ISO 1065:1991. Analysis of surface active agents (raw materials). Ethylene oxide adductsMethods for determination of cloud temperature (cloud point)
BS 6829-4-4.3:1988, ISO 2270-1972. Analysis of surface active agents (raw materials). Ethylene oxide adducts.Method for determination of oxyethylene groups
BS 6829-4-4.4:1989, ISO 4320-1977. Analysis of surface active agents (raw materials). Ethylene oxide adductsMethod for determination of cloud point index
BS 6829-5.1:1990, ISO 6842:1989. Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphatesMethod for determination of total active matter content
BS 6829-5.2:1989, ISO 6843:1988. Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphatesMethod for estimation of mean relative molecular mass
BS 6829-5-5.1:1987, ISO 6842-1983. Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates.Method for determination of total active matter content
BS 6829-5-5.3:1989, ISO 8799:1988. Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphatesMethod for determination of unsulphated matter content
BS 6830:1987. Specification for continuously hot-dip aluminium/zinc alloy coated cold rolled carbon steel flat products
BS 6831:1987, ISO 7846-1985. Specification for industrial real-time FORTRAN
BS 6832:1987. Method for specifying requirements for a FORTRAN language processor
BS 6833-1:1987. Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networksSpecification for general requirements
BS 6833-2:1987. Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks.Specification for cordless telephone apparatus using radio links
BS 6833-2:1992. Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networksSpecification for cordless telephone apparatus using radio links
BS 6833-3:1992. Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networksSpecification for the simple call routeing mode of cordless PBX operation with analogue interfaces to the PSTN and terminating stations treated as an entirety
BS 6833-5:1991. Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networksSpecification for the cordless elements within PBX apparatus with analogue interfaces to the PSTN and terminating stations treated as an entirety
BS 6834:1987. Specification for active anaesthetic gas scavenging systems
BS 6835:1988. Method for determination of the rate of fatigue crack growth in metallic materials
BS 6837:1987, ISO 3394-1984. Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads
BS 6838-1:1987, ISO 7965/1-1984. Testing of sacks.Method for determination of resistance of paper sacks to vertical impact by dropping
BS 6839-1:1987. Mains signalling equipment.Specification for communication and interference limits and measurements
BS 684-0.1:1995. Methods of analysis of fats and fatty oils. General introductionGeneral procedures and list of determinations in BS 684
BS 684-0:1982. Methods of analysis of fats and fatty oils.General introduction
BS 684-0:1989. Methods of analysis of fats and fatty oilsGeneral introduction
BS 6840-1:1987, IEC 60268-1:1985. Sound system equipment.Methods for specifying and measuring general characteristics used for equipment performance
BS 6840-10:1991, IEC 60268-10:1991. Sound system equipment.Methods for specifying and measuring the characteristics of peak programme level meters
BS 6840-11:1988, IEC 60268-11:1987. Sound system equipment.Specification for application of connectors for the interconnection of sound system components
BS 6840-11:1994, IEC 60268-11:1987. Sound system equipment.Specification for application of connectors for the interconnection of sound system components
BS 6840-12:1987, IEC 60268-12:1987. Sound system equipment.Specification for applications of connectors for broadcast and similar use
BS 6840-12:1993, IEC 60268-12:1987. Sound system equipmentSpecification for application of connectors for broadcast and similar use
BS 6840-13:1987, IEC 60268-13:1985. Sound system equipmentGuide for listening tests on loudspeakers
BS 6840-13:1998, IEC 60268-13:1998. Sound system equipmentListening tests on loudspeakers
BS 6840-14:1987, IEC 60268-14:1980. Sound system equipment.Guide for circular and elliptical loudspeakers; outer frame diameters and mounting dimensions
BS 6840-15:1988, IEC 60268-15:1987. Sound system equipment.Specification for matching values for the interconnection of sound system components
BS 6840-15:1992, IEC 60268-15:1987. Sound system equipmentSpecification for matching values for the interconnection of sound system components
BS 6840-16:1989, IEC 60268-16:1988. Sound system equipmentGuide to the 'RASTI' method for the objective rating of speech intelligibility in auditoria
BS 6840-17:1991, IEC 60268-17:1990. Sound system equipment.Methods for specifying and measuring the characteristics of standard volume indicators
BS 6840-18:1996, IEC 60268-18:1995. Sound system equipmentPeak programme level meters. Guide for digital audio level meter
BS 6840-2:1988, IEC 60268-2:1987. Sound system equipment.Glossary of general terms and calculation methods
BS 6840-2:1993, IEC 60268-2:1987. Sound system equipmentGlossary of general terms and calculation methods
BS 6840-3:1989, IEC 60268-3:1988. Sound system equipment.Methods for specifying and measuring the characteristics of sound system amplifiers
BS 6840-3:1992, IEC 60268-3:1988. Sound system equipmentMethods for specifying and measuring the characteristics of sound system amplifiers
BS 6840-4:1987, IEC 60268-4:1972. Sound system equipmentMethods for specifying and measuring the characteristics of microphones
BS 6840-4:1997, IEC 60268-4:1997. Sound system equipmentMicrophones
BS 6840-5:1990, IEC 60268-5:1989. Sound system equipmentMethods for specifying and measuring the characteristics of loudspeakers
BS 6840-6:1987, IEC 60268-6:1971. Sound system equipment.Methods for specifying and measuring the characteristics of auxiliary passive elements
BS 6840-8:1988, IEC 60268-8:1973. Sound system equipmentMethods for specifying and measuring the characteristics of automatic gain control devices
BS 6840-9:1987, IEC 60268-9:1977. Sound system equipment.Methods for specifying and measuring the characteristics of artificial reverberation, time delay and frequency shift equipment
BS 684-1.1:1995, ISO 6883:1995. Methods of analysis of fats and fatty oils. Physical methodsDetermination of litre weight in air
BS 684-1.1:2000, ISO 6883:2000. Methods of analysis of fats and fatty oils. Physical methodsDetermination of litre weight in air
BS 684-1.11:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of penetration value
BS 684-1.12:1990, ISO 8293:1990. Methods of analysis of fats and fatty oils. Physical methodsDetermination of dilatation
BS 684-1.13:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of cooling curve
BS 684-1.14:1998, ISO 15305:1998. Methods of analysis of fats and fatty oils. Physical methodsDetermination of Lovibond colour
BS 684-1.15:1990, ISO 3656:1989. Methods of analysis of fats and fatty oils. Physical methodsDetermination of ultraviolet absorbance
BS 684-1.16:1981, ISO 934:1980. Methods of analysis of fats and fatty oils. Physical methodsDetermination of water content: entrainment method
BS 684-1.17:1998, ISO 15267:1998. Methods of analysis of fats and fatty oils. Physical methodsFlashpoint limit test using Pensky-Martens closed-cup flash tester
BS 684-1.2:1996, ISO 6320:1995. Methods of analysis of fats and fatty oils. Physical methodsDetermination of refractive index
BS 684-1.3:1991, ISO 6321:1991. Methods of analysis of fats and fatty oils. Physical methodsDetermination of melting point (slip point)
BS 684-1.4:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of flow and drop points
BS 684-1.5:1987. Methods of analysis of fats and fatty oils. Physical methods.Determination of cloud point
BS 684-1.6:1988, ISO 935:1988. Methods of analysis of fats and fatty oils. Physical methods.Determination of titre
BS 684-1.7:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of surface-drying time
BS 684-1.8:1976. Methods of analysis of fats and fatty oils. Physical methodsDetermination of smoke point
BS 684-1.9:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of water-insoluble solvents
BS 6841:1987. Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
BS 684-1-1.1:1985. Methods of analysis of fats and fatty oils. Physical methodsDetermination of litre weight in air
BS 684-1-1.10:1982. Methods of analysis of fats and fatty oils. Physical methodsDetermination of moisture and other volatile matter
BS 684-1-1.12:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of the dilatation of fats
BS 684-1-1.14:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of colour
BS 684-1-1.14:1987. Methods of analysis of fats and fatty oils. Physical methodsDetermination of colour
BS 684-1-1.15:1978, ISO 3656-1977. Methods of analysis of fats and fatty oils. Physical methods.Determination of specific extinction in ultra-violet light
BS 684-1-1.2:1984, ISO 6320-1983. Methods of analysis of fats and fatty oils. Physical methodsDetermination of refractive index
BS 684-1-1.3:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of melting point (slip point)
BS 684-1-1.5:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of cloud point
BS 684-1-1.6:1976. Methods of analysis of fats and fatty oils. Physical methods.Determination of titre
BS 684-2.1:1996, ISO 8534:1996. Methods of analysis of fats and fatty oils. Other methodsDetermination of water by the Karl Fischer method
BS 684-2.11:1976. Methods of analysis of fats and fatty oils. Other methods.Determination of volatile acids (Reichert, Polenske and Kirschner values)
BS 684-2.12:1984. Methods of analysis of fats and fatty oils. Other methodsDetermination of oxidized fatty acids
BS 684-2.14:1998, ISO 3960:1998. Methods of analysis of fats and fatty oils. Other methodsDetermination of peroxide value
BS 684-2.14:2001, ISO 3960:2001. Methods of analysis of fats and fatty oils. Other methodsDetermination of peroxide value
BS 684-2.15:1986. Methods of analysis of fats and fatty oils. Other methodsCalculation of total saponifiable matter
BS 684-2.16:1976. Methods of analysis of fats and fatty oils. Other methods.Determination of copper. Colorimetric method
BS 684-2.17:1976. Methods of analysis of fats and fatty oils. Other methods.Determination of iron. Colorimetric method
BS 684-2.2:1986, ISO 6884-1985. Methods of analysis of fats and fatty oils. Other methodsDetermination of ash
BS 684-2.20:1977. Methods of analysis of fats and fatty oils. Other methodsDetermination of carotene in vegetable oils
BS 684-2.25:1997, ISO 6886:1996. Methods of analysis of fats and fatty oils. Other methodsDetermination of oxidative stability (accelerated oxidation test)
BS 684-2.26:1986. Methods of analysis of fats and fatty oils. Other methodsDetermination of polyethylene-type plastics
BS 684-2.27:1987. Methods of analysis of fats and fatty oils. Other methods.Determination of bleachability
BS 684-2.29:1978. Methods of analysis of fats and fatty oils. Other methods.Cottonseed oil test (Halphen)
BS 684-2.32:1979. Methods of analysis of fats and fatty oils. Other methodsDetermination of rancidity index
BS 684-2.33:1983, ISO 5558:1982. Methods of analysis of fats and fatty oils. Other methodsDetection and identification of antioxidants
BS 684-2.34:1980, ISO 5509-1978. Methods of analysis of fats and fatty oils. Other methodsPreparation of methyl esters of fatty acids
BS 684-2.36:1983, ISO 6463:1982. Methods of analysis of fats and fatty oils. Other methods.Determination of butylhydroxyanisole (BHA) and butylhydroxytoluene (BHT)
BS 684-2.4:1976. Methods of analysis of fats and fatty oils. Other methodsCalculation of total fatty matter
BS 684-2.42:1989, ISO 7366:1987. Methods of analysis of fats and fatty oils. Other methodsDetermination of 1-monoglycerides and free glycerol contents
BS 684-2.43:1988, ISO 7847:1987. Methods of analysis of fats and fatty oils. Other methods.Determination of polyunsaturated fatty acids with a cis,cis 1,4-diene structure
BS 684-2.44:1984, ISO 6464:1983. Methods of analysis of fats and fatty oils. Other methodsDetermination of gallates
BS 684-2.46:1998, ISO 9936:1997. Methods of analysis of fats and fatty oils. Other methodsDetermination of tocopherols and tocotrienols contents
BS 684-2.47:1998, ISO 15302:1998. Methods of analysis of fats and fatty oils. Other methodsDetermination of benzo[α]pyrene content by reverse-phase high-performance liquid chromatography
BS 684-2.48:1998. Methods of analysis of fats and fatty oils. Other methodsDetermination of mineral acidity
BS 684-2.5:1989. Methods of analysis of fats and fatty oils. Other methodsDetermination of alkalinity
BS 684-2.6:1989, ISO 3657:1988. Methods of analysis of fats and fatty oils. Other methodsDetermination of saponification value
BS 684-2.8:1977. Methods of analysis of fats and fatty oils. Other methods.Determination of total neutral oil
BS 684-2.9:1977. Methods of analysis of fats and fatty oils. Other methodsDetermination of the hydroxyl value and the acetyl value
BS 6842:1987. Guide to measurement and evaluation of human exposure to vibration transmitted to the hand
BS 684-2-2.1:1976. Methods of analysis of fats and fatty oils. Other methodsDetermination of water by the Karl Fischer method
BS 684-2-2.10:1976. Methods of analysis of fats and fatty oils. Other methods.Determination of acidity, acid value and mineral acidity
BS 684-2-2.10:1988. Methods of analysis of fats and fatty oils. Other methodsDetermination of acidity
BS 684-2-2.13:1981, ISO 3961-1979. Methods of analysis of fats and fatty oils. Other methods.Determination of iodine value
BS 684-2-2.13:1990, ISO 3961:1989. Methods of analysis of fats and fatty oils. Other methodsDetermination of iodine value
BS 684-2-2.14:1976. Methods of analysis of fats and fatty oils. Other methods.Determination of peroxide value
BS 684-2-2.14:1987, ISO 3960-1977. Methods of analysis of fats and fatty oils. Other methodsDetermination of peroxide value
BS 684-2-2.2:1976. Methods of analysis of fats and fatty oils. Other methods.Determination of ash
BS 684-2-2.23:1977, ISO 3577-1976. Methods of analysis of fats and fatty oils. Other methods.Determination of Bömer value
BS 684-2-2.23:1989, ISO 3577:1988. Methods of analysis of fats and fatty oils. Other methods.Determination of Boemer value
BS 684-2-2.24:1989, ISO 6885:1988. Methods of analysis of fats and fatty oils. Other methods.Determination of anisidine value
BS 684-2-2.25:1979. Methods of analysis of fats and fatty oils. Other methodsDetermination of oxidative stability value
BS 684-2-2.3:1983. Methods of analysis of fats and fatty oils. Other methodsDetermination of insoluble impurities
BS 684-2-2.3:1993, ISO 663:1992. Methods of analysis of fats and fatty oils. Other methodsDetermination of insoluble impurities content
BS 684-2-2.30:1978. Methods of analysis of fats and fatty oils. Other methods.Sesame oil test (Baudouin)
BS 684-2-2.35:1980, ISO 5508-1978. Methods of analysis of fats and fatty oils. Other methods.Analysis by gas-liquid chromatography of methyl esters of fatty acids
BS 684-2-2.38:1983, ISO 6799-1983. Methods of analysis of fats and fatty oils. Other methods.Determination of the proportions of individual sterols in the sterol fraction
BS 684-2-2.38:1992, ISO 6799:1991. Methods of analysis of fats and fatty oils. Other methodsDetermination of the proportions of individual sterols in the sterol fraction
BS 684-2-2.39:1986, ISO 6800-1985. Methods of analysis of fats and fatty oils. Other methodsDetermination of the composition of fatty acids in the 2-position
BS 684-2-2.41:1987, ISO 8209-1986. Methods of analysis of fats and fatty oils. Other methods.Determination of erucic acid
BS 684-2-2.42:1986. Methods of analysis of fats and fatty oils. Other methods.Determination of 1-monoglyceride and free glycerol contents
BS 684-2-2.5:1977. Methods of analysis of fats and fatty oils. Other methods.Determination of dissolved soap (alkalinity)
BS 684-2-2.6:1977. Methods of analysis of fats and fatty oils. Other methods.Determination of saponification value
BS 684-2-2.7:1977. Methods of analysis of fats and fatty oils. Other methods.Determination of unsaponifiable matter
BS 6843-0:1988, ISO 8216-0:1986. Classification of petroleum fuelsGeneral classification
BS 6843-1:1987, ISO 8216-1:1986. Classification of petroleum fuelsMarine fuels
BS 6843-1:1996, ISO 8216-1:1996. Classification of petroleum fuelsMarine fuels
BS 6843-2:1988, ISO 8216-2:1986. Classification of petroleum fuels.Gas turbine fuels for industrial and marine applications
BS 6843-3:1988, ISO 8216-3:1987. Classification of petroleum fuelsLiquefied petroleum gases
BS 6844:1987. Method for determination of the flat crush resistance of corrugating medium after laboratory fluting (CMT Concora Medium Test)
BS 6845:1987. Method for evaluation of vulcanization characteristics of halogenated isobutene-isoprene rubber (BIIR and CIIR)
BS 6845:1996, ISO 7663:1995. Method for evaluation of vulcanization characteristics of halogenated isobutene-isoprene rubber (BIIR and CIIR)
BS 6846:1987, ISO 6806-1984. Specification for rubber hoses and hose assemblies for use in oil burners
BS 6847:1987, ISO 6808-1984. Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids
BS 6849:1987, ISO 6973-1986. Specification for drop-forged rivetless chains for conveyors
BS 6850:1987. Specification for ventilatory resuscitators
BS 6850:2002. Gas powered ventilatory resuscitators
BS 6851:1987, ISO 7744-1986. Method for preparing a statement of requirements for hydraulic fluid power filters
BS 6852:1987. Specification for dimensions of housings for hydraulic cylinder piston rod wiper rings in reciprocating applications
BS 6853:1987. Code of practice for fire precautions in the design and construction of railway passenger rolling stock
BS 6853:1999. Code of practice for fire precautions in the design and construction of passenger carrying trains
BS 6854-1:1987. Code of practice for safeguarding woodworking machinesGeneral recommendations
BS 6854-2:1988. Code of practice for safeguarding woodworking machinesCircular sawing machines (sawing machines with rotating tools)
BS 6854-3:1989. Code of practice for safeguarding woodworking machinesVertical spindle moulding, routing and shaping machines (moulding machines for one side dressing)
BS 6854-5:1989. Code of practice for safeguarding woodworking machinesNarrow band sawing machines
BS 6855:1987. Recommendations for design and construction of glass splash heads for laboratory use
BS 6856:1987, ISO 2022-1986. Specification for code extension techniques for United Kingdom 7-bit and 8-bit coded character sets
BS 6857:1987, ISO 4620:1986. Specification for cadmium pigments for paints
BS 6858:1987. Specification for manually operated positioning devices and associated anchorage lines for use with industrial safety belts and harnesses
BS 6859-1:1987. Operating tables.Specification for mobile general operating tables
BS 6859-2:1987. Operating tables.Specification for fixed-pedestal general operating tables
BS 6860:1987, ISO 5526-1986. Nomenclature for cereals, pulses and other food grains
BS 6861-1:1987, ISO 1940-1:1986. Mechanical vibration. Balance quality requirements of rigid rotorsMethod for determination of permissible residual unbalance
BS 6861-2:1997, ISO 1940-2:1997. Mechanical vibration. Balance quality requirements of rigid rotorsBalance errors
BS 6862-1:1971. Specification for cables for vehiclesCables with copper conductors
BS 6863:1987. Specification for pedal cyclists' helmets
BS 6863:1989. Specification for pedal cyclists' helmets
BS 6864-1:1987, ISO 3822/1-1983. Laboratory tests on noise emission from appliances and equipment intended for use in water supply installationsMethod for measurement
BS 6864-2:1987. Laboratory tests on noise emission from appliances and equipment intended for use in water supply installationsMethod for mounting and operating draw-off taps
BS 6864-3:1987. Laboratory tests on noise emission from appliances and equipment intended for use in water supply installationsMethod for mounting and operating in-line valves and appliances
BS 6864-4:1987. Laboratory tests on noise emission from appliances and equipment intended for use in water supply installationsMethod for mounting and operating special appliances
BS 6865:1987, IEC 60461:1986. Specification for time and control codes for video tape recorders
BS 6866-3:1987, ISO 7278-3:1986. Proving systems for meters used in dynamic measurement of liquid hydrocarbonsMethods for pulse interpolation
BS 6867:1987. Code of practice for maintenance of electrical switchgear for voltages above 36 kV
BS 6867:2013. Maintenance of electrical switchgear and controlgear for voltages above 36 kV. Code of practice
BS 6868:1987, EN 28879:1990,ISO 8879-1986. Specification for standard generalized markup language (SGML) for text and office systems
BS 6869:1987. Code of practice for procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
BS 6870-2.1:1987, ISO 8558-1985. Analysis of aluminium ores. Chemical methodsMethod of preparation of pre-dried test samples
BS 6870-2.2:1987, ISO 8557-1985. Analysis of aluminium ores. Chemical methodsMethod for determination of hygroscopic moisture in analytical samples: gravimetric method
BS 6870-2.3:1987, ISO 6606-1986. Analysis of aluminium ores. Chemical methodsMethod for determination of loss of mass at 1075°C: gravimetric method
BS 6870-2.4:1987, ISO 6607-1985. Analysis of aluminium ores. Chemical methodsMethod for determination of silicon content: combined gravimetric and spectrophotometric method
BS 6870-2.5:1987, ISO 6609-1985. Analysis of aluminium ores. Chemical methodsMethod for determination of iron content: titrimetric method
BS 6870-2.6:1987, ISO 6994-1986. Analysis of aluminium ores. Chemical methodsMethod for determination of aluminium content: EDTA titrimetric method
BS 6870-2.7:1987, ISO 6995-1985. Analysis of aluminium ores. Chemical methodsMethod for determination of titanium content: spectrophotometric method
BS 6870-2.8:1987, ISO 8556-1986. Analysis of aluminium ores. Chemical methodsMethod for determination of phosphorus content: spectrophotometric method
BS 6870-3:1989. Analysis of aluminium oresMethod for multi-element analysis by wavelength dispersive X-ray fluorescence
BS 6871:1987. Specification for heat-sealable pouches and tube material converted from transparent plastics film and paper for steam sterilization for medical use
BS 6871:1989. Specification for heat-sealable pouches and tube material converted from transparent plastics film and paper for steam sterilization for medical use
BS 6872:1987. Specification for visual densities of diazo and vesicular second-generation microforms
BS 6873:1988. Specification for filament lamps for cycles
BS 6873:1988. Specification for filament lamps for cycles
BS 6874:1987, ISO 8115-1986. Specification for dimensions and density of cotton bales
BS 6875:1987, ISO 7839-1984. Glossary of terms for and classification of knitting machines
BS 6876:1987, ISO 7506-1984. Specification for numbering of machine parts for drawing-in on Jacquard machines
BS 6877:1987, ISO 8118-1986. Specification for temple cylinders for weaving machines
BS 6878:1988+A2:1993, EN 50052:1986. Specification for high-voltage switchgear and controlgear for industrial use. Cast aluminium alloy enclosures or gas-filled high-voltage switchgear and controlgear
BS 6879:1987. Specification for codes for the representation of names of counties and similar areas
BS 6879:1999. Code for the representation of names of counties and similar areas
BS 6880-1:1988. Code of practice for low temperature hot water heating systems of output greater than 45 kWFundamental and design considerations
BS 6880-2:1988. Code of practice for low temperature hot water heating systems of output greater than 45 kWSelection of equipment
BS 6880-3:1988. Code of practice for low temperature hot water heating systems of output greater than 45 kWInstallation, commissioning and maintenance
BS 6881:1988, EN 50033:1986. Specification for construction and testing of miners' caplamps in relation to the risk of explosion for mines susceptible to firedamp
BS 6882:1987. Guide for storage of raw solid natural and synthetic rubber
BS 6883:1969. Specification for elastomer-insulated cables for fixed wiring in ships
BS 6883:1991. Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units
BS 6883:1999. Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS 6884:1987. Recommendations for plan dimensions of unit loads
BS 6885:1988. Specification for miniature cartridge fuse links for use on printed wiring boards
BS 6886:1987. Specification for alumino-silicate refractories for use in coke ovens
BS 6888:1988. Methods for calibration of bonded electrical resistance strain gauges
BS 6889:1987. Specification for generating racks for synchronous belt drive pulleys
BS 6890:1987, ISO 5634-1986. Method for determination of grease resistance of paper and board
BS 6891:1988. Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas)
BS 6891:1998. Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas)
BS 6891:2005+A2:2008. Installation of low pressure gas pipework of up to 35 mm (R1 1/4)in domestic premises (2nd family gas). Specification
BS 6893-2:1987, IEC 60684-2:1984. Flexible insulating sleeving for electrical purposesMethods of test
BS 6893-3.209:1995, IEC 60684-3-209:1987. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingGeneral purpose heat-shrinkable sleeving, flame retarded polyolefin shrink ratio 2:1
BS 6893-3.300:1995, IEC 60684-3-300:1987. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingGlass textile fibre sleeving, braided, uncoated
BS 6893-3.320:1995, IEC 60684-3-320:1987. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingPolyethylene terephthalate textile, lightly impregnated
BS 6893-3-100 to 105:1995. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingExtruded PVC sleeving
BS 6893-3-116 to 118:1995, IEC 60684-3-116 to 118:1991. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingGeneral purpose extruded polychloroprene
BS 6893-3-121 and 122:1995, IEC 60684-3-121 and 122:1988. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingExtruded silicone sleeving
BS 6893-3-240 to 243:1995, IEC 60684-3-240 to 243:1991. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingHeat shrinkable PTFE sleeving
BS 6893-3-400 to 402:1995, IEC 60684-3-400 to 402:1991. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingGlass textile sleeving with silicone elastomer coating
BS 6893-3-403 to 405:1995, IEC 60684-3-403 to 405:1988. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingGlass textile sleeving with acrylic based coating
BS 6893-3-406 to 408:1995, IEC 60684-3-406 to 408:1988. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingGlass textile sleeving with PVC based coating
BS 6893-3-420 to 422:1995, IEC 60684-3-420 to 422:1991. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleevingPolyethylene terephthalate textile with acrylic based coating
BS 6894:1987. Specification for jute hessian tubing
BS 6895:1987, IEC 60856:1986. Specification for pre-recorded optical reflective videodisks for 50 Hz/625 lines CCIR monochrome and colour coding PAL systems
BS 6896:1987. Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 6896:1991. Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 6896:2005. Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 6896:2011. Specification for installation and maintenance of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 6897-1:1987, ISO 7626-1:1986. Experimental determination of mechanical mobility.Specification for transducers
BS 6897-2:1990, ISO 7626-2:1990. Methods for experimental determination of mechanical mobility.Measurements using single-point translation excitation with an attached vibration exciter
BS 6897-5:1995, ISO 7626-5:1994. Experimental determination of mechanical mobilityMeasurement using impact excitation with an exciter which is not attached to the structure
BS 6898:1987. Specification for glass centrifuge tubes for general laboratory use
BS 6899:1984. Specification for rubber insulation and sheath of electric cables
BS 6899:1991. Specification for rubber insulation and sheath of electric cables
BS 6900:1987, ISO 150:1980. Specification for raw, refined and boiled linseed oils for paints and varnishes
BS 6901:1987. Specification for rating and performance of air source heat pumps with electrically driven compressors
BS 690-2:1981. Asbestos-cement slates and sheetsSpecification for asbestos-cement and cellulose-asbestos-cement flat sheets
BS 6902-1:1990, EN 50061:1988. Cardiac pacemakersSpecification for implantable cardiac pacemakers
BS 6902-1:Supplement No. 1:1996, EN 50061/A1:1995. Cardiac pacemakersSpecification for implantable cardiac pacemakers. Electromagnetic compatibility
BS 6902-2:1987, ISO 5841-2:1986. Cardiac pacemakersMethod for reporting the clinical performance of populations of pulse generators
BS 690-3:1973. Asbestos-cement slates and sheetsCorrugated sheets
BS 690-4:1974. Asbestos-cement slates and sheetsSlates
BS 6904:1987, IEC 60859:1986. Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
BS 690-5:1975. Asbestos-cement slates and sheetsLining sheets and panels
BS 6905:1987. Method for estimation of concentration of disinfectants used in 'dirty' conditions in hospitals by the modified Kelsey-Sykes test
BS 690-6:1976. Asbestos-cement slates and sheetsFittings for use with corrugated sheets
BS 6906-1:1987. Methods of test for geotextilesDetermination of the tensile properties using a wide width strip
BS 6906-2:1989. Methods of test for geotextilesDetermination of the apparent pore size distribution by dry sieving
BS 6906-3:1989. Methods of test for geotextilesDetermination of water flow normal to the plane of the geotextile under a constant head
BS 6906-4:1989. Methods of test for geotextilesDetermination of the puncture resistance (CBR puncture test)
BS 6906-5:1991. Methods of test for geotextilesDetermination of creep
BS 6906-6:1990. Methods of test for geotextilesDetermination of resistance to perforation (cone drop test)
BS 6906-7:1990. Methods of test for geotextilesDetermination of in-plane waterflow
BS 6906-8:1991. Methods of test for geotextilesDetermination of sand-geotextile frictional behaviour by direct shear
BS 6907-1:1988. Electrical installations for open-cast mines and quarries.Glossary
BS 6907-2:1988. Electrical installations for open-cast mines and quarries.General recommendations for protection against direct contact and electric shock
BS 6907-3:1988. Electrical installations for open-cast mines and quarries.Recommendations for equipment and ancillaries
BS 6907-4:1988. Electrical installations for open-cast mines and quarriesRecommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems
BS 6907-5:1988. Electrical installations for open-cast mines and quarries.Recommendations for operation
BS 6908:1988, EN 123:1980. Specification for safety requirements for gas fuelled smokers' lighters
BS 6908:1990, EN 29994:1990,ISO 9994:1989. Specification for safety requirements for smokers' lighters
BS 6909:1988. Method for generation and counting of the airborne linting propensity of fabrics in the dry state
BS 691:1979. Specification for clinical maximum thermometers (mercury-in-glass)
BS 691:1987. Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem)
BS 6910-1:1988. Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c.Specification for materials
BS 6910-2:1989. Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c.Code of practice for on-site installation
BS 6911-1:1988, ISO 9246:1988. Testing earth-moving machineryMethod for determination of volumetric rating of crawler and wheel tractor dozer blades
BS 6911-10:1996, ISO 10532:1995. Testing earth-moving machineryMachine-mounted retrieval device. Performance requirements
BS 6911-11:1997, ISO 7451:1997. Testing earth-moving machineryMethod for the determination of volumetric ratings for hydraulic excavator buckets and backhoe loader buckets
BS 6911-12:1998, ISO 7457:1997. Testing earth-moving machineryDetermination of turning dimensions of wheeled machines
BS 6911-13:1998, ISO 6016:1998. Testing earth-moving machineryMethods of measuring the masses of whole machines, their equipment and components
BS 6911-14:1998, ISO 10265:1998. Testing earth-moving machineryCrawler machines. Performance requirements and test procedures for braking systems
BS 6911-2:1990, ISO 8313:1989. Testing earth-moving machineryMeasurement of tool forces and tipping loads of loaders
BS 6911-3:1990, ISO 6015:1989. Testing earth-moving machineryMeasurement of tool forces of hydraulic excavators
BS 6911-4:1990, ISO 9249:1989. Testing earth-moving machineryMethod for the evaluation of engine power output
BS 6911-4:1998, ISO 9249:1997. Testing earth-moving machineryEngine test code. Net power
BS 6911-5:1992, ISO 5006-1:1991. Testing earth-moving machineryDetermination of operator's field of view
BS 6911-6:1992, ISO 8813:1992. Testing earth-moving machineryMethod for the evaluation of lift capacity of pipelayers and wheel tractors or loaders equipped with side boom
BS 6911-7:1992, ISO 9248:1992. Testing earth-moving machineryTesting of earth-moving machinery. Specification for units of measurement and tolerances
BS 6911-8:1993, ISO 10266:1992. Testing earth-moving machineryDetermination of slope limits for machine fluid systems operation (static test method)
BS 6911-9:1993, ISO 10268:1993. Testing earth-moving machineryVerification of retarder capability of dumpers and tractor-scrapers
BS 6912-1:1988, ISO 8643:1988. Safety of earth-moving machinerySpecification for hydraulic excavator and backhoe loader boom lowering control device
BS 6912-1:1997, ISO 8643:1997. Safety of earth-moving machinerySpecification for hydraulic excavator and backhoe loader boom lowering control device
BS 6912-10:1993, ISO 5010:1992. Safety of earth-moving machinerySpecification for steering capability of rubber tyred earth-moving machines
BS 6912-11:1993, ISO 10533:1993. Safety of earth-moving machineryRequirements for lift arm support devices
BS 6912-12:1993, ISO 5006-2:1993. Safety of earth-moving machineryEvaluation of operator's field of view
BS 6912-13:1993, ISO 5006-3:1993. Safety of earth-moving machineryAcceptance criteria for operator's field of view
BS 6912-14:1995, ISO 3471:1994. Safety of earth-moving machinerySpecification for laboratory tests and performance requirements of roll-over protective structures
BS 6912-15:1995, ISO 2867:1994. Safety of earth-moving machinerySpecification for access systems
BS 6912-16:1995, ISO 13333:1994. Safety of earth-moving machinerySpecification for dumper body support and operator's cab tilt support devices
BS 6912-17:1995, ISO 7096:1994. Safety of earth-moving machinerySpecification for laboratory evaluation of operator seat vibration
BS 6912-18:1995, ISO 12508:1994. Safety of earth-moving machinerySpecification for bluntness of edges at the operator station and in maintenance areas
BS 6912-19:1996, ISO 11112:1995. Safety of earth-moving machinerySpecification for dimensions and requirements for operator's seat
BS 6912-2:1989, ISO 5998:1986. Safety of earth-moving machinerySpecification for rated operating load for crawler and wheel loaders
BS 6912-20:1996, ISO 10968:1995. Safety of earth-moving machinerySpecification for operator's controls
BS 6912-21:1996, ISO 12509:1995. Safety of earth-moving machinerySpecification for lighting, signalling and marking lights, and reflex-reflector devices
BS 6912-22.1:1996, ISO 10263-1:1994. Safety of earth-moving machinery. Operator enclosure environmentGeneral and definitions
BS 6912-22.2:1996, ISO 10263-2:1994. Safety of earth-moving machinery. Operator enclosure environmentAir filter test
BS 6912-22.3:1996, ISO 10263-3:1994. Safety of earth-moving machinery. Operator enclosure environmentOperator enclosure pressurization test method
BS 6912-22.4:1996, ISO 10263-4:1994. Safety of earth-moving machinery. Operator enclosure environmentOperator enclosure ventilation, heating and/or air-conditioning test method
BS 6912-22.5:1996, ISO 10263-5:1994. Safety of earth-moving machinery. Operator enclosure environmentWindscreen defrosting system test method
BS 6912-22.6:1996, ISO 10263-6:1994. Safety of earth-moving machinery. Operator enclosure environmentDetermination of the effect of solar heating on the operator enclosure
BS 6912-23:1996, ISO 9244:1995. Safety of earth-moving machinerySafety signs and hazard pictorials. General principles
BS 6912-3:1990, ISO 9533:1989. Safety of earth-moving machinerySound test method for machine-mounted forward and reverse warning alarm
BS 6912-4:1991, ISO 10264:1990. Safety of earth-moving machinerySpecification for key-locked starting systems
BS 6912-6:1992, ISO 3449:1992. Safety of earth-moving machinerySpecification for falling-object protective structures on earth-moving machinery: Laboratory tests and performance requirements
BS 6912-7:1992, ISO 3164:1992. Safety of earth-moving machinerySpecification for laboratory evaluations of roll-over and falling-object protective structures: the deflection-limiting volume for earth-moving machinery
BS 6912-8:1992, ISO 10570:1992. Safety of earth-moving machinerySpecification for performance requirements of an articulated frame locking device
BS 6912-9:1992, ISO 10567:1992. Safety of earth-moving machineryMethods for the calculation and verification of the lift capacity of hydraulic excavators
BS 6913-1:1989, ISO 4510-1:1987. Operation and maintenance of earth-moving machineryGuide to common maintenance and adjustment service tools
BS 6913-10:1994, ISO 6302:1993. Operation and maintenance of earth-moving machinery.Specification for drain, fizz and level plugs
BS 6913-11:1994, ISO 11862:1993. Operation and maintenance of earth-moving machinery.Specification for auxiliary starting aid electrical connector
BS 6913-12:1995, ISO 10261:1994. Operation and maintenance of earth-moving machinerySpecification for a product identification numbering system
BS 6913-13:1997, ISO 6392-1:1996. Operation and maintenance of earth-moving machinerySpecification for lubrication fittings. Nipple type
BS 6913-14:1997, ISO 6392-2:1996. Operation and maintenance of earth-moving machinerySpecification for lubrication fittings. Grease-gun nozzles
BS 6913-15:1997, ISO 4510-2:1996. Operation and maintenance of earth-moving machinerySpecification for service tools. Mechanical pullers and pushers
BS 6913-3:1989, ISO 7129:1989. Operation and maintenance of earth-moving machinerySpecification for principal shapes and basic dimensions for cutting edges for tractors with dozer, graders and tractor scrapers
BS 6913-3:1998, ISO 7129:1997. Operation and maintenance of earth-moving machinerySpecification for cutting edges used on tractor-dozers, graders and scrapers. Principal shapes and basic dimensions
BS 6913-4:1990, ISO 6012:1989. Operation and maintenance of earth-moving machineryRecommendations for service instrumentation
BS 6913-4:1997, ISO 6012:1997. Operation and maintenance of earth-moving machineryRecommendations for service instrumentation
BS 6913-5:1990. Operation and maintenance of earth-moving machinerySpecification for diagnostic ports
BS 6913-6:1991, ISO 9247:1990. Operation and maintenance of earth-moving machinerySpecification for identification and marking of electrical wires and cables
BS 6913-7:1991, ISO 8927:1991. Operation and maintenance of earth-moving machineryGlossary for machine availability
BS 6913-8:1992, ISO 6405-1:1991. Operation and maintenance of earth-moving machinerySpecification for common symbols for operator controls and other displays
BS 6913-9:1994, ISO 6405-2:1993. Operation and maintenance of earth-moving machinerySpecification for specific symbols for machines, equipment and accessories
BS 6914-1:1988, ISO 6165:1987. Terminology (including definitions of dimensions and symbols) for earth-moving machineryGlossary of terms for basic types of earth-moving machinery
BS 6914-10:1998, ISO 7131:1997. Terminology (including definitions of dimensions and symbols) for earth-moving machineryTerminology and commercial specifications for loaders
BS 6914-2:1988, ISO 6746-1:1987. Terminology (including definitions of dimensions and symbols) for earth-moving machineryGlossary of terms for base machine
BS 6914-3:1988, ISO 6746-2:1987. Terminology (including definitions of dimensions and symbols) for earth-moving machineryGlossary of terms for equipment
BS 6914-4:1988, ISO 7132-1984. Terminology (including definitions of dimensions and symbols) for earth-moving machinery.Glossary for dumpers
BS 6914-4:1990, ISO 7132:1990. Terminology (including definitions of dimensions and symbols) for earth-moving machineryGlossary for dumpers
BS 6914-5:1988, ISO 7136-1986. Terminology (including definitions of dimensions and symbols) for earth-moving machineryGlossary for pipelayers
BS 6914-5:1999, ISO 7136:1998. Terminology (including definitions of dimensions and symbols) for earth-moving machineryGlossary for pipelayers
BS 6914-6:1989, ISO 6747-1988. Terminology (including definitions of dimensions and symbols) for earth-moving machineryTerminology for self-propelled crawler and wheel tractors and their equipment
BS 6914-6:1999, ISO 6747:1998. Terminology (including definitions of dimensions and symbols) for earth-moving machineryTerminology and commercial specifications for self-propelled crawler and wheel tractors and their equipment
BS 6914-7:1992, ISO 9245:1991. Terminology (including definitions of dimensions and symbols) for earth-moving machineryVocabulary, symbols and units for machine performance
BS 6914-8:1993, ISO 7135:1993. Terminology (including definitions of dimensions and symbols) for earth-moving machineryTerminology and commercial specifications for hydraulic excavators
BS 6914-9:1996, ISO 7133:1994. Terminology (including definitions of dimensions and symbols) for earth-moving machineryTerminology and commercial specifications for tractor-scrapers
BS 6915:1988. Specification for design and construction of fully supported lead sheet roof and wall coverings
BS 6915:2001. Design and construction of fully supported lead sheet roof and wall coverings. Code of practice
BS 6916-1:1988, ISO 6531:1982. Chain sawsGlossary of terms
BS 6916-10:1988, ISO 8334:1985. Chain saws.Specification for longitudinal balance
BS 6916-11:1989. Chain sawsSpecification for general design, performance, safety and construction requirements for internal combustion engined machines
BS 6916-2:1988, ISO 6532:1982. Chain sawsMethod for specifying requirements
BS 6916-2:1996, ISO 6532:1993. Chain sawsTechnical data
BS 6916-3:1988, ISO 6533:1983. Chain sawsSpecification for dimensions of front hand guards
BS 6916-4:1988, ISO 6534:1985. Chain saws.Specification for strength of front hand guards
BS 6916-5:1988, ISO 6535-1983. Chain saws.Methods of evaluating chain brake performance
BS 6916-6:1988, EN 27182:1991,ISO 7182-1984. Chain sawsMethod of measurement of airborne noise at the operator's position
BS 6916-7:1988, ISO 7293:1983. Chain sawsMethod of evaluating engine performance including fuel consumption
BS 6916-7:1998, ISO 7293:1997. Chain sawsMethod of evaluating engine performance including fuel consumption
BS 6916-8:1988, ISO 7505:1986. Chain saws.Method of measurement of hand-transmitted vibration
BS 6916-9:1988, ISO 7915-1985. Chain saws.Specification for strength of handles
BS 6917:1987, ISO 7384:1986. Method for corrosion testing in artificial atmospheres: general principles
BS 6918:1987, ISO 8044-1986. Glossary of terms for corrosion of metals and alloys
BS 6918:1990, ISO 8044:1989. Glossary of terms for corrosion of metals and alloys
BS 6919:1987, IEC 60872:1987. Specification for marine automatic radar plotting aids (ARPA)
BS 692:1976. Specification for meteorological thermometers
BS 692:1990. Specification for meteorological thermometers
BS 6920-1:1988. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water.Specification
BS 6920-1:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterSpecification
BS 6920-1:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterSpecification
BS 6920-1:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterSpecification
BS 6920-2.1:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testSamples for testing
BS 6920-2.2.1:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Taste of waterGeneral method of test
BS 6920-2.2.1:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of waterGeneral method of test
BS 6920-2.2.1:2000+A2:2008. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterMethods of test
BS 6920-2.2.2:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Taste of waterMethod of testing tastes imparted to water by hoses
BS 6920-2.2.2:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of waterMethod of testing tastes imparted to water by hoses
BS 6920-2.2.2:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterOdour and flavour of water
BS 6920-2.2.3:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Taste of waterMethod of testing tastes imparted to water by hoses for conveying water for food and drink preparation
BS 6920-2.2.3:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of waterMethod of testing tastes imparted to water by hoses for conveying water for food and drink preparation
BS 6920-2.2.3:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of waterMethods of test
BS 6920-2.3:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testAppearance of water
BS 6920-2.3:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterMethods of test
BS 6920-2.4:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testGrowth of aquatic micro-organisms test
BS 6920-2.4:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of waterMethods of test
BS 6920-2.5:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testThe extraction of substances that may be of concern to public health
BS 6920-2.5:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of waterMethods of test
BS 6920-2.6:1996. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testThe extraction of metals
BS 6920-2.6:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of waterMethods of test
BS 6920-2-1:2000+A3:2008. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterMethods of test
BS 6920-2-2.1:1988. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test.Samples for testing
BS 6920-2-2.1:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testSamples for testing
BS 6920-2-2.2:1988. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test.Taste of water
BS 6920-2-2.3:1988. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test.Appearance of water
BS 6920-2-2.3:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testAppearance of water
BS 6920-2-2.4:1988. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testGrowth of aquatic microorganisms
BS 6920-2-2.5:1988. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test.The extraction of substances that may be of concern to public health
BS 6920-2-2.5:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testThe extraction of substances that may be of concern to public health
BS 6920-2-2.6:1988. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test.The extraction of metals
BS 6920-2-2.6:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of testThe extraction of metals
BS 6920-3:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterHigh temperature tests
BS 6920-3:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterHigh temperature tests
BS 6920-4:1997. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterMethod of test. The GCMS identification of water leachable organic substances
BS 6920-4:2001. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterMethod for the GCMS identification of water leachable organic substances
BS 6921:1988, IEC 60795:1984. Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method
BS 6923:1988. Method for calculation of small colour differences
BS 6924:1988, ISO 6251-1982. Method for determination of corrosiveness of liquefied petroleum gases to copper
BS 6925:1988. Specification for mastic asphalt for building and civil engineering (limestone aggregate)
BS 6926:1988. Specification for copper for electrical purposes: high conductivity copper wire rod
BS 6927:1988, EN 132:1986. Glossary of terms for respiratory protective devices
BS 6928:1988, EN 133:1986. Classification of respiratory protective devices
BS 6929:1988, EN 134:1986. Nomenclature of components for respiratory protective devices
BS 6930:1988, EN 135:1986. List of equivalent terms for respiratory protective devices
BS 6931:1988. Glossary of terms for copper and copper alloys
BS 6932:1988. Method for measurement of the effective focal spot size of mini-focus and micro-focus X-ray tubes used for industrial radiography
BS 6934:1988, EN 26876:1989,ISO 6876:1986. Specification for dental root canal sealing materials
BS 6935-5:1988, ISO 7176-5:1986. Wheelchair testsMethods for determination of overall dimensions, mass and turning space
BS 6936:1988, ISO 7930-1986. Method for designation of types of wheelchair
BS 6937:1988, ISO 6440-1985. Glossary of wheelchair terms
BS 6938:1988. Recommendations for documentation of the preparation of certified reference materials for metallurgical analysis of non-ferrous metals
BS 6939-1:1987. Recommendations for intermediate bulk containers (IBCs) for dangerous goods.General provisions applicable to all types of IBC
BS 6939-1:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goodsGeneral provisions applicable to all types of IBC
BS 6939-2:1987. Recommendations for intermediate bulk containers (IBCs) for dangerous goods.Specific requirements for metallic prismatic IBCs
BS 6939-2:1990. Recommendations for intermediate bulk containers (IBCs) for dangerous goods.Specific requirements for metal IBCs
BS 6939-2:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goodsSpecific requirements for metal IBCs
BS 6939-3:1987. Recommendations for intermediate bulk containers (IBCs) for dangerous goods.Specific requirements for flexible IBCs
BS 6939-3:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goodsSpecific requirements for flexible IBCs
BS 6939-4:1987. Recommendations for intermediate bulk containers (IBCs) for dangerous goods.Specific requirements for rigid plastics IBCs
BS 6939-4:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goodsSpecific requirements for rigid plastics IBCs
BS 6939-5:1987. Recommendations for intermediate bulk containers (IBCs) for dangerous goods.Specific requirements for composite IBCs with plastics inner receptacles
BS 6939-5:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goodsSpecific requirements for composite IBCs with plastics inner receptacles
BS 6939-6:1987. Recommendations for intermediate bulk containers (IBCs) for dangerous goods.Specific requirements for fibreboard IBCs
BS 6939-6:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goodsSpecific requirements for fibreboard IBCs
BS 6939-7:1987. Recommendations for intermediate bulk containers (IBCs) for dangerous goods.Specific requirements for wooden IBCs
BS 6939-7:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goodsSpecific requirements for wooden IBCs
BS 6940-1:1989. Total Access Communication System (T.A.C.S)Specification for performance requirements for mobile stations
BS 6940-2:1989. Total Access Communication System (T.A.C.S)Specification for performance and tests of the signalling system of mobile stations
BS 6941:1988. Specification for electrical apparatus for explosive atmospheres with type of protection N
BS 6942-1:1988. Design and construction of small kits for oxy-fuel gas welding and allied processesSpecification for kits using one or more non-refillable gas containers for oxygen and fuel gas
BS 6942-2:1989. Design and construction of small kits for oxy-fuel gas welding and allied processesSpecification for kits using refillable gas containers for oxygen and fuel gas
BS 6943:1988. Classification of shapes of electronic components for placement on printed wiring boards
BS 6944:1988. Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)
BS 6946:1988. Specification for metal channel cable support systems for electrical installations
BS 6947:1988. Specification for acid oils and recovered fatty acid distillates
BS 6948:1989. Methods of test for mechanically fastened joints in timber and wood-based materials
BS 6949:1988. Specification for bitumen-based coatings for cold application, excluding use in contact with potable water
BS 6949:1991. Specification for bitumen-based coatings for cold application excluding use in contact with potable water
BS 6950:1988, EN 27566:1991,ISO 7566:1987. Specification for a standard reference zero for the calibration of pure tone bone conduction audiometers
BS 6951:1988, EN 27029:1991,ISO 7029-1984. Specification for threshold of hearing by air conduction as a function of age and sex for otologically normal persons
BS 6952-1:1988. Exterior wood coating systemsGuide to classification and selection
BS 6953:1988, ISO 7078-1985. Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)
BS 6954-1:1988, ISO 3443-1:1979. Tolerances for buildingRecommendations for basic principles for evaluation and specification
BS 6954-2:1988, ISO 3443-2:1979. Tolerances for buildingRecommendations for statistical basis for predicting fit between components having a normal distribution of sizes
BS 6954-3:1988, ISO 3443-3:1987. Tolerances for buildingRecommendations for selecting target size and predicting fit
BS 6955-0:1988, ISO 5347-0:1987. Calibration of vibration and shock pick-upsGuide to basic principles
BS 6955-1:1994, ISO 5347-1:1993. Calibration of vibration and shock pick-ups.Methods for primary vibration calibration by laser interferometry
BS 6955-10:1994, ISO 5347-10:1993. Calibration of vibration and shock pick-ups.Method for primary calibration by high impact shocks
BS 6955-11:1994, ISO 5347-11:1993. Calibration of vibration and shock pick-ups.Method of test for transverse vibration sensitivity
BS 6955-12:1994, ISO 5347-12:1993. Calibration of vibration and shock pick-ups.Method of test for transverse shock sensitivity
BS 6955-13:1994, ISO 5347-13:1993. Calibration of vibration and shock pick-ups.Method of test for base strain sensitivity
BS 6955-14:1994, ISO 5347-14:1993. Calibration of vibration and shock pick-ups.Method of test for resonance frequency of undamped accelerometers on a steel block
BS 6955-15:1994, ISO 5347-15:1993. Calibration of vibration and shock pick-ups.Method of test for acoustic sensitivity
BS 6955-16:1994, ISO 5347-16:1993. Calibration of vibration and shock pick-ups.Method of test for mounting torque sensitivity
BS 6955-17:1994, ISO 5347-17:1993. Calibration of vibration and shock pick-ups.Method of test for fixed temperature sensitivity
BS 6955-18:1994, ISO 5347-18:1993. Calibration of vibration and shock pick-ups.Method of test for transient temperature sensitivity
BS 6955-19:1994, ISO 5347-19:1993. Calibration of vibration and shock pick-ups.Method of test for magnetic field sensitivity
BS 6955-2:1994, ISO 5347-2:1993. Calibration of vibration and shock pick-ups.Methods for primary shock calibration by light cutting
BS 6955-20:1997, ISO 5347-20:1997. Calibration of vibration and shock pick-upsPrimary vibration calibration by the reciprocity method
BS 6955-22:1997, ISO 5347-22:1997. Calibration of vibration and shock pick-upsAccelerometer resonance testing. General methods
BS 6955-3:1994, ISO 5347-3:1993. Calibration of vibration and shock pick-upsMethods for secondary vibration calibration
BS 6955-4:1994, ISO 5347-4:1993. Calibration of vibration and shock pick-ups.Method for secondary shock calibration
BS 6955-5:1994, ISO 5347-5:1993. Calibration of vibration and shock pick-ups.Method for calibration by earth's gravitation
BS 6955-6:1994, ISO 5347-6:1993. Calibration of vibration and shock pick-ups.Method for primary vibration calibration at low frequencies
BS 6955-7:1994, ISO 5347-7:1993. Calibration of vibration and shock pick-ups.Methods for primary calibration by centrifuge
BS 6955-8:1994, ISO 5347-8:1993. Calibration of vibration and shock pick-ups.Method for primary calibration by dual centrifuge
BS 6955-9:1994, ISO 5347-9:1993. Calibration of vibration and shock pick-ups.Method for secondary vibration calibration by comparison of phase angles
BS 6956-1:1988. Jointing materials and compoundsSpecification for corrugated metal joint rings
BS 6956-5:1992. Jointing materials and compoundsSpecification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases
BS 6956-6:1992. Jointing materials and compoundsSpecification for jointing compounds for 3rd family gases
BS 6956-7:1992. Jointing materials and compoundsSpecification for anaerobic jointing compounds for use with 1st, 2nd and 3rd family gases
BS 6958-1:1988, EN 28860-1:1989,ISO 8860-1:1987. Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each side.Dimensional, physical and magnetic characteristics
BS 6958-2:1988, EN 28860-2:1989,ISO 8860-2:1987. Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each side.Track format
BS 6959:1988. Code of practice for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases (other than for mining applications or explosives processing and manufacture)
BS 6959:1989. Code of practice for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases (other than for mining applications or explosives processing and manufacture)
BS 6960:1988, ISO 8326:1987. Open Systems Interconnection: basic connection-oriented session service definition
BS 696-1:1955. Specification for Gerber method for the determination of fat in milk and milk products.Apparatus
BS 6961:1988, ISO 8327:1987. Open Systems Interconnection: basic connection-oriented session protocol specification
BS 696-1:1989. Determination of fat content of milk and milk products (Gerber method)Specification for apparatus
BS 696-2:1969. Gerber method for the determination of fat in milk and milk products.Methods
BS 6962:1988, ISO 8824:1987. Open Systems Interconnection: specification for Abstract Syntax Notation One (ASN.1)
BS 696-2:1989. Determination of fat content of milk and milk products (Gerber method)Methods
BS 6963:1988, ISO 8825:1987. Open Systems Interconnection. Specification for basic encoding rules for Abstract Syntax Notation One (ASN.1)
BS 6964:1988, ISO 9075:1987. Specification for database language SQL
BS 6964:1990, ISO/IEC 9075:1989. Specification for database language SQL with integrity enhancement
BS 6965-1:1988. Creasing properties of carton board.Method for determination of crease recovery (spring back) of 90° fold
BS 6967:1988, EN 165:1986. Glossary of terms for personal eye-protection
BS 6968:1988, ISO 3056:1986. Guide for use and maintenance of non-calibrated round steel lifting chain and chain slings
BS 697:1977. Specification for rubber gloves for electrical purposes
BS 697:1986. Specification for rubber gloves for electrical purposes
BS 6972:1988. Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use
BS 6974:1991. Specification for unsintered PTFE tape for thread sealing applications (coarse threads)
BS 6975:1988. Specification for non-metallic tensional strapping
BS 6976:1988, ISO 8631-1986. Specification for program constructs and conventions for their representation
BS 6977:1981. Specification for insulated flexible cables for lifts and for other flexible connections
BS 6977:1991. Specification for insulated flexible cables for lifts and for other flexible connections
BS 6978-1:1988, ISO 7256-1:1984. Seed drills.Methods of test for single seed drills
BS 6978-2:1990, ISO 7256-2:1984. Seed drills.Methods of test for seed drills for rows
BS 6979:1989. Method for measurement of static deflection of power presses
BS 698:1956. Specification. Papers for electrical purposes
BS 6981:1988. Method for determination of acid content of wool
BS 6982:1988, EN 60901:1990,IEC 60901:1987. Single-capped fluorescent lamps. Safety and performance requirements
BS 6983:1988, IEC 60520:1975. Methods for determination and expression of entrance field sizes of electro-optical X-ray image intensifiers
BS 6984:1988. Specification for dimensions of housings for elastomer-energized plastic-faced hydraulic seals in reciprocating applications
BS 6985:1989. Specification for dual-scale and ovulation clinical maximum thermometers (mercury-in-glass, enclosed scale)
BS 6986-1:1988, ISO 7516-1984. Analysis of instant teaMethods of sampling
BS 6986-2:1988, ISO 6770-1982. Analysis of instant teaMethods for determination of free-flow and compacted bulk densities
BS 6986-3:1990+A1:2012, ISO 7513:1990. Instant tea in solid form. Determination of moisture content (loss in mass at 103°)
BS 6986-4:1990, ISO 7514:1990. Analysis of instant teaMethod for determination of total ash
BS 6988:1989. Method for determination of the adhesion of autoclave tape to tray wrap material
BS 6989:1989, ISO 8456-1985. Guide to Safety of storage equipment for loose bulk materials
BS 699:1984. Specification for copper direct cylinders for domestic purposes
BS 6990:1989. Code of practice for welding on steel pipes containing process fluids or their residuals
BS 6991:1990. Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment
BS 6992-1:1988, ISO 3004-1:1986. Capacities and related cross sections of open-top cans for food and drinksRecommendations for cans for general food
BS 6992-2:1991. Capacities and related cross sections of open-top cans for food and drinksRecommendations for cans for meat and meat products for human consumption
BS 6992-3:1988, ISO 3004-3:1986. Capacities and related cross sections of open-top cans for food and drinksRecommendations for cans for drinks
BS 6992-4:1989, ISO 3004-5:1988. Capacities and related cross sections of open-top cans for food and drinksRecommendations for cans for fish and other fishery products
BS 6992-5:1988, ISO 3004-6:1986. Capacities and related cross sections of open-top cans for food and drinksRecommendations for cans for milk
BS 6993-1:1989. Thermal and radiometric properties of glazingMethod for calculation of the steady state U-value (thermal transmittance)
BS 6993-2:1990. Thermal and radiometric properties of glazingMethod for direct measurement of U-value (thermal transmittance)
BS 6994:1988. Specification for steel shackles for lifting and general engineering purposes: grade M(4)
BS 6995:1988, ISO 2322-1985. Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
BS 6995:1997, ISO 2322:1996. Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
BS 6996:1989. Specification for mineral oil resistant acrylonitrile-butadiene rubber compounds
BS 6996:2003. Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification
BS 6997:1990. Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996
BS 6998:1988. Specification for bunk beds
BS 6999:1989. Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW
BS 6F 100:1998. Procedure for inspection and testing of textiles for aerospace purposes
BS 6F 34:1984. Specification for light and medium duty linen (flax) sewing thread for aerospace purposes
BS 6F 47:1983. Specification for cotton tape
BS 6F 49:2007. Specification for shuttle woven cotton webbing for aerospace purposes
BS 6F 8:1975. Specification for mercerized 140 g cotton fabric and serrated edge strip
BS 6G 205-1:1995. Secondary batteries for aircraftSpecification for lead-acid batteries
BS 6L 16:1985. Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)
BS 6L 17:1985. Specification for sheet and strip of 99% aluminium (temper designation-O)
BS 6L 37:1971. Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 6S 100:2010. Aerospace series. Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
BS 6S 80:1990. Specification for high chromium-nickel corrosion-resisting steel forging stock, bars, forgings and parts (880-1080 MPa, limiting ruling section 100 mm)
BS 6SP 4:2000+A3:2012. Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 MPa
BS 6V 3:1943. Specification for aircraft material. High strength plywood for aircraft
BS 6W 8:1938. Tie rods (swaged) (No. 4 B.A. to ½ inch B.S.F. inclusive) for aircraft purposes
BS 7000-1:1989. Design management systemsGuide to managing product design
BS 7000-1:1999. Design management systemsGuide to managing innovation
BS 7000-1:2008. Design management systemsGuide to managing innovation
BS 7000-10:1995. Design management systemsGlossary of terms used in design management
BS 7000-10:2008. Design management systemsVocabulary of terms used in design management
BS 7000-2:1997. Design management systemsGuide to managing the design of manufactured products
BS 7000-2:2008. Design management systemsGuide to managing the design of manufactured products
BS 7000-3:1994. Design management systemsGuide to managing service design
BS 7000-4:1996. Design management systemsGuide to managing design in construction
BS 7000-5:2001. Design management systemsDesign management systems. Guide to managing obsolescence
BS 7000-6:2005. Design management systemsManaging inclusive design. Guide
BS 700-1:1982, ISO 835-1:1981. Graduated pipettesSpecification for general requirements
BS 7001:1988. Specification for interchangeability and safety of a standardized luminaire supporting coupler
BS 700-2:1982, ISO 835-2:1981. Graduated pipettesSpecification for pipettes for which no waiting time is specified
BS 7002:1989, EN 60950:1988. Specification for safety of information technology equipment including electrical business equipment
BS 700-3:1982, ISO 835-4:1981. Graduated pipettesSpecification for blow-out pipettes
BS 7003:1988, IEC 60817:1984. Specification for spring-operated impact-test apparatus and its calibration
BS 7004:1988, EN 137:1986. Specification for respiratory protective devices: self-contained open-circuit compressed air breathing apparatus
BS 7005:1988. Specification for design and manufacture of carbon steel unfired pressure vessels for use in vapour compression refrigeration systems
BS 7006:1989, ISO 8912-1986. Specification for trailed agricultural rollers
BS 7007-1:1988, ISO 2422:1986. Abrasive productsSpecification for dimensions and designation of truncated cone abrasive sleeves
BS 7007-2:1988, ISO 3919-1986. Abrasive products.Specification for designation and dimensions of coated abrasive flap wheels with shafts
BS 7007-2:1994, ISO 3919:1993. Abrasive products.Specification for designation and dimensions of coated abrasive flap wheels with shafts
BS 7007-3:1988, ISO 8366:1987. Abrasive products.Specification for dimensional tolerances on non-standard coated abrasive products
BS 7007-5:1994, ISO 1929:1993. Abrasive productsSpecification for dimensions, tolerances and designation of abrasive belts
BS 7007-6:1994, ISO 2235:1993. Abrasive products.Specification for dimensions, tolerances and designation of abrasive sheets
BS 7008-1:1988. Acquisition and presentation of comparable data for basic properties of plastics.Method for single-point data
BS 7008-2:1988. Acquisition and presentation of comparable data for basic properties of plasticsMethod for multipoint data
BS 7009:1988. Guide to application of real-time radiography to weld inspection
BS 701:1953. Specification for brewers' mash flask
BS 7010:1988. Code of practice for a system of tolerances for the dimensions of plastics mouldings
BS 7011-0:1989. Consumable accessories for light microscopes.General introduction
BS 7011-1-1.1:1989, ISO 8036-1:1986. Consumable accessories for light microscopes. Immersion oilsSpecification for immersion oils for general use
BS 7011-1-1.1:1998, ISO 8036-1:1998. Consumable accessories for light microscopes. Immersion oilsSpecification for immersion oils for general use
BS 7011-2.1:1989. Consumable accessories for light microscopes. Slides.Specification for dimensions and optical properties
BS 7011-2.2:1998, ISO 8037-2:1997. Consumable accessories for light microscopes. SlidesSpecification for materials and quality of finish
BS 7011-2-2.2:1990. Consumable accessories for light microscopes. SlidesSpecification for materials and quality of finish
BS 7011-3.1:1989, ISO 8255-1:1986. Consumable accessories for light microscopes. Cover glasses.Specification for dimensions and optical properties
BS 7011-3.2:1998, ISO 8255-2:1997. Consumable accessories for light microscopes. Cover glassesSpecification for materials and quality of finish
BS 7011-3-3.2:1990. Consumable accessories for light microscopes. Cover glassesSpecification for materials and quality of finish
BS 7012-0:1989. Light microscopes.General introduction
BS 7012-1:1990. Light microscopesSpecification for the magnifying power of microscope imaging components
BS 7012-1:1998, ISO 8039:1997. Light microscopesSpecification for the magnifying power of microscope imaging components
BS 7012-10.1:1998, ISO 11884-1:1998. Light microscopes. Minimum requirements for stereo microscopesStereo microscopes for general use
BS 7012-10.2:1997, ISO 11884-2:1997. Light microscopes. Minimum requirements for stereo microscopesHigh performance microscopes
BS 7012-10.4:1998, ISO 15362:1998. Light microscopes. Minimum requirements for stereo microscopesInformation provided to the user
BS 7012-11:1998, ISO 12853:1997. Light microscopesInformation provided to the user
BS 7012-12:1997, ISO 8576:1996. Light microscopesReference system of polarized light microscopy
BS 7012-13:1997, ISO 11882:1997. Light microscopesInterfacing connection for 35 mm SLR photo cameras (T-thread adaptation)
BS 7012-14:1997, ISO 11883:1997. Light microscopesMarking of stereomicroscopes
BS 7012-15:1997, ISO 8578:1997. Light microscopesMarking of objectives and eyepieces
BS 7012-16:1997, ISO 10937:1997. Light microscopesDiameter of interchangeable eyepieces for microscopes with tube length 160 mm
BS 7012-16:2001, ISO 10937:2000. Light microscopesDiameter of interchangeable eyepieces
BS 7012-3:1989. Light microscopesSpecification for fitting connecting optical dimensions for tube length 160 mm
BS 7012-3:1997, ISO 9345-1:1996. Light microscopesImaging distances related to mechanical reference planes for tube length 160 mm
BS 7012-4.1:1998, ISO 8038-1:1997. Light microscopes. Specification for microscope objective and nosepiece screw threadsScrew thread type RMS (4/5 in x 1/36 in)
BS 7012-4:1989, ISO 8038-1985. Light microscopesSpecification for microscope objective and nosepiece screw threads
BS 7012-5:1988, ISO 8040-1986. Light microscopesSpecification for connecting dimensions of tube slides and tube slots
BS 7012-6:1990. Light microscopesSpecification for spectral filters
BS 7012-6:1998, ISO 8577:1997. Light microscopesSpecification for spectral filters
BS 7012-8:1990. Light microscopesSpecification for surface marked graticules for eyepieces
BS 7012-8:1997, ISO 9344:1996. Light microscopesGraticules for eyepieces
BS 7012-9:1989. Light microscopesSpecification for interfacing connector
BS 7012-9:1997, ISO 10935:1996. Light microscopesSpecification for interfacing connection type C
BS 7013:1989, EN 26873:1991,ISO 6873-1983. Specification for dental gypsum products
BS 7014:1989. Guide to the romanization of Chinese
BS 7015:1989, EN 263:1987. Specification for cast acrylic sheet for baths and shower trays for domestic purposes
BS 7016-1:1988, ISO 7967-1:1987. Components and systems of reciprocating internal combustion engines.Glossary of terms for structure and external covers
BS 7016-2:1988, ISO 7967-2:1987. Components and systems of reciprocating internal combustion enginesGlossary of terms for main running gear
BS 7016-3:1988, ISO 7967-3:1987. Components and systems of reciprocating internal combustion engines.Glossary of terms for valves, camshaft drive and actuating mechanisms
BS 7016-4:1988, ISO 7967-4:1988. Components and systems of reciprocating internal combustion enginesGlossary of terms for pressure charging and air/exhaust gas ducting systems
BS 7016-5:1992, ISO 7967-5:1992. Components and systems of reciprocating internal combustion enginesGlossary of terms for cooling systems
BS 7016-6:1992, ISO 7967-6:1992. Components and systems of reciprocating internal combustion engines.Glossary of terms for lubricating systems
BS 7016-7:1999, ISO 7967-7:1998. Components and systems of reciprocating internal combustion enginesGoverning systems
BS 7016-8:1990, ISO 7967-8:1990. Components and systems of reciprocating internal combustion enginesGlossary of terms for starting systems
BS 7016-8:1996, ISO 7967-8:1994. Components and systems of reciprocating internal combustion enginesGlossary of terms for starting systems
BS 7016-9:1997, ISO 7967-9:1996. Components and systems of reciprocating internal combustion enginesControl and monitoring systems
BS 7017:1988, ISO 7944:1984. Specification for reference wavelengths for optics and optical instruments
BS 7018:1988. Guide to use of electrical insulating materials containing asbestos
BS 7019:1989. Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines
BS 7020-1:1988, ISO 7764-1985. Analysis of iron oresMethod for the preparation of pre-dried test samples for chemical analysis
BS 7020-10.2:1988, ISO 4693-1986. Analysis of iron ores. Methods for the determination of copper contentFlame atomic absorption spectrometric method
BS 7020-10-10.1:1988, ISO 5418-1984. Analysis of iron ores. Methods for the determination of copper content.Spectrophotometric method
BS 7020-11.1:1993, ISO 9683:1991. Analysis of iron ores. Methods for the determination of vanadium content.BPHA spectrophotometric method
BS 7020-11.2:1993, ISO 9684:1991. Analysis of iron ores. Methods for the determination of vanadium content.Flame atomic absorption spectrometric method
BS 7020-12:1988, ISO 4691-1985. Analysis of iron oresMethod for the determination of titanium content: spectrophotometric method
BS 7020-13:1988, ISO 7834-1987. Analysis of iron oresMethod for the determination of arsenic content. Spectrophotometric method
BS 7020-14:1988, ISO 6831-1986. Analysis of iron oresMethod for the determination of sodium and/or potassium contents: flame atomic absorption spectrometric method
BS 7020-15:1993, ISO 10203:1993. Analysis of iron ores.Methods for the determination of calcium content: flame atomic absorption spectrometric method
BS 7020-16:1993, ISO 9685:1991. Analysis of iron ores.Methods for the determination of nickel and/or chromium contents: flame atomic absorption spectrometric method
BS 7020-17:1988, ISO 8753-1987. Analysis of iron ores.Method for the determination of lead and/or zinc contents: flame atomic absorption spectrometric method
BS 7020-18:1993, ISO 10204:1992. Analysis of iron ores.Methods for the determination of magnesium content: flame atomic absorption spectrometric method
BS 7020-19:1988, ISO 4694-1987. Analysis of iron oresMethod for the determination of fluorine content. Ion-selective electrode method
BS 7020-2:1988, ISO 2596:1984. Analysis of iron oresMethod for the determination of hygroscopic moisture in analytical samples
BS 7020-20:1990, ISO 9517:1989. Analysis of iron oresMethod for the determination of water soluble chloride content. Ion-selective electrode method
BS 7020-22:1990, ISO 9035:1989. Analysis of iron oresMethod for the determination of acid-soluble iron (II) content. Titrimetric method
BS 7020-3:1988, ISO 7335-1987. Analysis of iron oresMethod for the determination of combined water content
BS 7020-4.2:1990, ISO 9507:1990. Analysis of iron ores. Method for the determination of total iron contentTitanium (III) chloride reduction methods
BS 7020-4.3:1990, ISO 9508:1990. Analysis of iron ores. Method for the determination of total iron contentSilver reduction titrimetric method
BS 7020-4-4.1:1988, ISO 2597-1985. Analysis of iron ores. Method for the determination of total iron contentTitrimetric methods
BS 7020-5.1:1993, ISO 2598-1:1992. Analysis of iron ores. Methods for the determination of silicon content.Gravimetric methods
BS 7020-5.2:1993, ISO 2598-2:1992. Analysis of iron ores. Methods for the determination of silicon content.Reduced molybdosilicate spectrophotometric method
BS 7020-6.1:1988, ISO 2599-1983. Analysis of iron ores. Methods for the determination of phosphorus contentTitrimetric method
BS 7020-6.2:1993, ISO 4687-1:1992. Analysis of iron ores. Methods for the determination of phosphorus content.Molybdenum blue spectrophotometric method
BS 7020-7.1:1988, ISO 4689-1986. Analysis of iron ores. Methods for the determination of sulphur contentGravimetric method
BS 7020-7.2:1988, ISO 4690-1986. Analysis of iron ores. Methods for the determination of sulphur contentCombustion method
BS 7020-8.1:1988, ISO 6830-1986. Analysis of iron ores. Methods for the determination of aluminium contentTitrimetric method
BS 7020-8.2:1993, ISO 4688-1:1992. Analysis of iron ores. Methods for the determination of aluminium content.Flame atomic absorption spectrometric method
BS 7020-9.1:1988, ISO 3886-1986. Analysis of iron ores. Methods for the determination of manganese contentSpectrophotometric method
BS 7020-9.2:1993, ISO 9682-1:1991. Analysis of iron ores. Methods for the determination of manganese content.Flame atomic absorption spectrometric method
BS 7021:1989. Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam
BS 7022:1988. Guide for geophysical logging of boreholes for hydrogeological purposes
BS 7023-1:1988, EN 28378-1:1989,ISO 8378-1:1986. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sidesDimensional, physical and magnetic characteristics
BS 7023-2:1988, EN 28378-2:1989,ISO 8378-2:1986. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sidesTrack format A
BS 7023-3:1988, EN 28378-3:1989,ISO 8378-3:1986. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sidesTrack format B
BS 7024-1:1988, EN 27487-1:1989,ISO 7487-1:1985. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sidesDimensional, physical and magnetic characteristics
BS 7024-2:1988, EN 27487-2:1989,ISO 7487-2-1985. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sidesTrack format A
BS 7024-3:1988, EN 27487-3:1989,ISO 7487-3-1986. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sidesTrack format B
BS 7025:1988. Method for preparation of test codes of engineering grade for measurement at the operator's or bystander's position of noise emitted by machinery
BS 7026:1989, ISO 8819:1987. Method for detection of hydrogen sulphide in liquefied petroleum gases using lead acetate
BS 7027:1990. Specification for limits and methods of measurement of the immunity of marine electrical and electronic equipment to conducted and radiated electromagnetic interference
BS 7028:1988. Guide for selection, use and maintenance of eye-protection for industrial and other uses
BS 7028:1999. Eye protection for industrial and other uses. Guidance on selection, use and maintenance
BS 7029-1:1993. Method of specifying thermoplastics injection mouldings.General requirements
BS 7029-2:1993. Method of specifying thermoplastics injection mouldings.Additional requirements for polycarbonate, polyamide and polyethylene mouldings
BS 7030:1988, ISO 7991:1987. Method for determination of the coefficient of mean linear thermal expansion of glass
BS 7031:1988, ISO 8654:1987. Specification for colours of gold alloys
BS 7032:1988, ISO 4265-1986. Method for determination of phosphorus content of lubricating oils and additives by a quinoline phosphomolybdate procedure
BS 7033-1:1989. Cleaning and polishing clothsSpecification for optical polishing cloths for use on transparent plastics panels
BS 7033-2:1989. Cleaning and polishing clothsSpecification for industrial wipers from reclaimed materials, and waste yarn for cleaning and lubricating purposes
BS 7033-3:1989. Cleaning and polishing clothsSpecification for floorcloths and dishcloths
BS 7033-4:1990. Cleaning and polishing clothsSpecification for window cleaning cloths
BS 7033-5:1990. Cleaning and polishing clothsSpecification for general polishing cloths
BS 7034-1:1988, ISO 7884-1:1987. Viscosity and viscometric fixed points of glassRecommendations for use in the determination of viscosity and viscometric fixed points
BS 7034-2:1988, ISO 7884-2:1987. Viscosity and viscometric fixed points of glassMethod for the determination of viscosity by rotation viscometers
BS 7034-3:1988, ISO 7884-3:1987. Viscosity and viscometric fixed points of glassMethod for the determination of viscosity by fibre elongation viscometer
BS 7034-4:1988, ISO 7884-4:1987. Viscosity and viscometric fixed points of glassMethod for the determination of viscosity by beam bending
BS 7034-5:1988, ISO 7884-5:1987. Viscosity and viscometric fixed points of glassMethod for the determination of working point by sinking bar viscometer
BS 7034-6:1988, ISO 7884-6:1987. Viscosity and viscometric fixed points of glassMethod for the determination of softening point
BS 7034-7:1988, ISO 7884-7:1987. Viscosity and viscometric fixed points of glassMethod for the determination of annealing point and strain point by beam bending
BS 7034-8:1988, ISO 7884-8:1987. Viscosity and viscometric fixed points of glassMethod for the determination of (dilatometric) transformation temperature
BS 7035:1989. Code of practice for socketing of stranded steel wire ropes
BS 7036:1988. Code of practice for provision and installation of safety devices for automatic power operated pedestrian door systems
BS 7036-1:1996. Code of practice for safety at powered doors for pedestrian useGeneral
BS 7036-2:1996. Code of practice for safety at powered doors for pedestrian useStraight and curved sliding doors and prismatic and folding doors
BS 7036-3:1996. Code of practice for safety at powered doors for pedestrian useSwing doors and balanced doors
BS 7036-4:1996. Code of practice for safety at powered doors for pedestrian useLow energy swing doors
BS 7036-5:1996. Code of practice for safety at powered doors for pedestrian useRevolving doors
BS 7037-1:1988, ISO 5538:1987. Sampling plans for milk and milk productsSpecification for inspection by attributes
BS 7037-2:1989, ISO 8197:1988. Sampling plans for milk and milk productsInspection by variables
BS 7038:1988, ISO 4081:1987. Specification for rubber coolant hoses and tubing for use on private cars and light commercial vehicles
BS 7039:1989, IEC 60915:1987. Recommendations for dimensions of spindle ends and bushes, and for dimensions for the mounting of single-hole, bush-mounted spindle-operated variable capacitors, variable resistors and potentiometers for electronic equipment
BS 7041:1989, IEC 60866:1987. Specification for characteristics and calibration of hydrophones for operation in the frequency range 0.5 MHz to 15 MHz
BS 7042:1988. Specification for high security intruder alarm systems in buildings
BS 7043:1989. Specification for silver plated table and decorative holloware
BS 7044-1:1990. Artificial sports surfacesClassification and general introduction
BS 7044-2.1:1989. Artificial sports surfaces. Methods of testMethods for determination of ball/surface interaction
BS 7044-2.2:1990. Artificial sports surfaces. Methods of testMethods for determination of person/surface interaction
BS 7044-2.3:1990. Artificial sports surfaces. Methods of testMethods for determination of durability
BS 7044-2.4:1989. Artificial sports surfaces. Methods of testMethods for determination of environmental resistance
BS 7044-2.5:1991. Artificial sports surfaces. Methods of testMiscellaneous
BS 7044-2-2.2:1989. Artificial sports surfaces. Methods of test.Methods for determination of Person/surface interaction
BS 7044-2-2.3:1989. Artificial sports surfaces. Methods of tests.Methods for determination of durability
BS 7044-2-2.5:1990. Artificial sports surfaces. Methods of test.Miscellaneous
BS 7044-4:1991. Artificial sports surfacesSpecification for surfaces for multi-sports use
BS 7054:1989, ISO 8749-1986. Method for shear testing of pins and grooved pins
BS 7061:1989, ISO 9660:1988. Specification for volume and file structure of compact read only optical disks (CD-ROM) for information interchange
BS 7062:1988, EN 29661:1991,ISO 9661:1988. Guide to construction and use of 12.7 mm (0.5 in) wide magnetic tape cartridges for data interchange, recording at 1491 data bytes per millimetre (37871 data bytes per inch), on 18 tracks
BS 7063:1989. Specification for analogue audio disk records and reproducing equipment
BS 7064:1989, IEC 60908:1987. Specification for compact disc digital audio system
BS 7065:1989, IEC 60843:1987. Specification for helical-scan video tape cassette system using 8 mm magnetic tape:Video 8
BS 7066-1:1990, EN 152-1:1988. Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in serviceBrushing procedure
BS 7066-2:1990, EN 152-2:1988. Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in serviceApplication by methods other than brushing
BS 7067:1990. Guide to determination and presentation of float and sink characteristics of raw coal and of products from coal preparation plants
BS 7068:1989. Specification for alternating pressure air mattresses
BS 7069:1988. Specification for cookware
BS 7070:1985. Specification for unleaded petrol (gasoline) for motor vehicles
BS 7070:1988. Specification for unleaded petrol (gasoline) for motor vehicles
BS 7071:1989. Specification for portable residual current devices
BS 7071:1992. Specification for portable residual current devices
BS 7072:1989. Code of practice for inspection and repair of offshore containers
BS 7073-1:1989, ISO 7555:1987. Oilseeds.Specification for soya beans
BS 7073-2:1989, ISO 7556:1987. Oilseeds.Specification for rape (colza) seeds with high erucic acid content
BS 7073-3:1989, ISO 7557:1988. Oilseeds.Specification for rape (colza) seeds with low erucic acid content
BS 7074-1:1989. Application, selection and installation of expansion vessels and ancillary equipment for sealed water systemsCode of practice for domestic heating and hot water supply
BS 7074-2:1989. Application, selection and installation of expansion vessels and ancillary equipment for sealed water systemsCode of practice for low and medium temperature hot water heating systems
BS 7074-3:1989. Application, selection and installation of expansion vessels and ancillary equipment for sealed water systemsCode of practice for chilled and condenser systems
BS 7076-1:1989. Dimensions of gaskets for flanges to BS 1560Specification for non-metallic flat gaskets
BS 7076-2:1989. Dimensions of gaskets for flanges to BS 1560Specification for metallic ring-joint gaskets for use with steel flanges
BS 7076-3:1989. Dimensions of gaskets for flanges to BS 1560Specification for non-metallic envelope gaskets
BS 7076-4:1989. Dimensions of gaskets for flanges to BS 1560Specification for corrugated, flat or grooved metallic and filled metallic gaskets
BS 7077-2.2:1989, EN 23964:1989,ISO 3964:1982. Dental handpieces and accessories. Accessories.Specification for coupling dimensions
BS 7077-2-2.1:1989, EN 29168:1989,ISO 9168:1988. Dental handpieces and accessories. Accessories.Specification for hose connectors
BS 7078:1989. Method for determination of the electrical resistance to earth of an installed textile floor covering
BS 7079:2009. General introduction to standards for preparation of steel substrates before application of paints and related products
BS 7079-0:1990. Preparation of steel substrates before application of paints and related productsIntroduction
BS 7079-A1 Supplement 1:1989. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanlinessRepresentative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
BS 7079-A3:2002, ISO 8501-3:2001. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanlinessPreparation grades of welds, cut edges and other areas with surface imperfections
BS 7079-D1:1993, ISO 8504-1:1992. Preparation of steel substrates before application of paints and related products. Methods for surface preparationGeneral principles
BS 7079-D2:1993, ISO 8504-2:1992. Preparation of steel substrates before application of paints and related products. Methods for surface preparationAbrasive blast-cleaning
BS 7079-F1:1994, ISO 11126-1:1993. Preparation of steel substrates before application of paints and related products. Non-metallic blast-cleaning abrasivesGeneral introduction and classification
BS 7080-1:1989, ISO 8462-1:1986. Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge for data interchange, using GCR recording at 394 ftpmm (10000 ftpi), 39 cpmm (1000 cpi).Mechanical, physical and magnetic properties
BS 7080-2:1989, ISO 8462-2:1986. Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using GCR for data interchange, recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi).Streaming mode
BS 7081-1:1989, ISO 8063-1:1986. Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using IMFM for data interchange, recording at 252 ftpmm (6400 ftpi).Mechanical, physical and magnetic properties
BS 7081-2:1989, ISO 8063-2:1986. Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge for data interchange, using IMFM recording at 252 ftpmm (6400 ftpi).Track format and method of recording for data interchange in start/stop mode
BS 7083:1989. Recommendations for the accommodation and operating environment of computer equipment
BS 7083:1996. Guide to the accommodation and operating environment for information technology (IT) equipment
BS 7084:1989. Specification for carbon and carbon-manganese steel tubular cored welding electrodes
BS 7085:1989. Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock
BS 7086:1989, ISO 5391:1988. Glossary of terms for pneumatic tools
BS 7087-1:1989. Herbs and spices ready for food useSpecification for black and white pepper (whole and ground)
BS 7087-1:1995. Herbs and spices ready for food useSpecification for black and white pepper (whole and ground)
BS 7087-10:1990. Herbs and spices ready for food useSpecification for dried mint (whole, rubbed and ground)
BS 7087-10:1996. Herbs and spices ready for food useSpecification for dried mint (whole, rubbed and ground)
BS 7087-11:1990. Herbs and spices ready for food useSpecification for ground paprika
BS 7087-11:1996. Herbs and spices ready for food useSpecification for ground paprika
BS 7087-12:1992. Herbs and spices ready for food useSpecification for dried basil (bouquets, rubbed and ground)
BS 7087-13:1992. Herbs and spices ready for food useSpecification for turmeric (whole and ground)
BS 7087-14:1992. Herbs and spices ready for food useSpecification for dried nutmeg and dried mace
BS 7087-15:1993. Herbs and spices ready for food useSpecification for cinnamon (whole and ground)
BS 7087-16:1993. Herbs and spices ready for food useSpecification for oregano (whole, rubbed and ground)
BS 7087-17:1993. Herbs and spices ready for food useSpecification for chillies (whole and ground)
BS 7087-18:1993. Herbs and spices ready for food useSpecification for dried rosemary (whole, rubbed and ground)
BS 7087-19:1994. Herbs and spices ready for food use.Specification for fennel seeds (whole and ground)
BS 7087-2:1989. Herbs and spices ready for food useSpecification for dried thyme (whole and ground)
BS 7087-2:1995. Herbs and spices ready for food useSpecification for dried thyme (whole and ground)
BS 7087-20:1995. Herbs and spices ready for food useSpecification for dried parsley (cut, rubbed and ground)
BS 7087-21:1995. Herbs and spices ready for food useSpecification for bay leaves (whole and ground)
BS 7087-22:1995. Herbs and spices ready for food useSpecification for dried mustard seeds (whole and ground)
BS 7087-23:1995. Herbs and spices ready for food useSpecification for dried caraway seeds (whole and ground)
BS 7087-24:1996. Herbs and spices ready for food useSpecification for dried pimento (allspice) (whole and ground)
BS 7087-25:1996. Herbs and spices ready for food useSpecification for dehydrated onion
BS 7087-26:1996. Herbs and spices ready for food useSpecification for dehydrated garlic
BS 7087-27:1997. Herbs and spices ready for food useSpecification for dried sesame seeds (dehulled)
BS 7087-28:1997. Herbs and spices ready for food useSpecification for dried tarragon (whole and ground)
BS 7087-29:1997. Herbs and spices ready for food useSpecification for dried whole dill seed, dill leaves and ground dill
BS 7087-3:1990. Herbs and spices ready for food useSpecification for dried sage (whole and ground)
BS 7087-3:1996. Herbs and spices ready for food useSpecification for dried sage (whole and ground)
BS 7087-4:1990. Herbs and spices ready for food useSpecification for cloves (whole and ground)
BS 7087-4:1996. Herbs and spices ready for food useSpecification for cloves (whole and ground)
BS 7087-5:1990. Herbs and spices ready for food useSpecification for dried cumin (whole and ground)
BS 7087-5:1996. Herbs and spices ready for food useSpecification for dried cumin (whole and ground)
BS 7087-6:1990. Herbs and spices ready for food useSpecification for coriander seeds (whole and ground)
BS 7087-6:1996. Herbs and spices ready for food useSpecification for coriander seeds (whole and ground)
BS 7087-7:1990. Herbs and spices ready for food useSpecification for dried fenugreek (whole or ground)
BS 7087-7:1996. Herbs and spices ready for food useSpecification for dried fenugreek (whole or ground)
BS 7087-8:1990. Herbs and spices ready for food useSpecification for dried ginger (whole and ground)
BS 7087-8:1996. Herbs and spices ready for food useSpecification for dried ginger (whole and ground)
BS 7087-9:1990. Herbs and spices ready for food useSpecification for dried marjoram (whole, rubbed and ground)
BS 7087-9:1996. Herbs and spices ready for food useSpecification for dried marjoram (whole, rubbed and ground)
BS 7088:1989. Specification for pneumatic tourniquet equipment
BS 7089:1989, ISO 9092:1988. Definition for nonwovens
BS 709:1983. Methods of destructive testing fusion welded joints and weld metal in steel
BS 7090-1:1989, ISO 8571-1:1988. Open Systems Interconnection: file transfer, access and managementGeneral introduction
BS 7090-2:1989, ISO 8571-2:1988. Open Systems Interconnection: file transfer, access and managementVirtual filestore definition
BS 7090-3:1989, ISO 8571-3:1988. Open Systems Interconnection: file transfer, access and managementFile service definition
BS 7090-4:1989, ISO 8571-4:1988. Open Systems Interconnection: file transfer, access and managementFile protocol specification
BS 7091:1989, ISO 8649:1988. Open Systems Interconnection: service definition for the Association Control Service Element
BS 7092:1989, ISO 8650:1988. Open Systems Interconnection: protocol specification for the Association Control Service Element
BS 7093:1989. Open Systems Interconnection: connection-oriented presentation service definition
BS 7094:1989, ISO 8823:1988. Open Systems Interconnection: connection-oriented presentation protocol specification
BS 7096:1990, EN 24909:1989,ISO 4909:1987. Guide to design and use of bank cards with a magnetic stripe that employs track 3
BS 7097:1990, ISO 6166:1987. Procedure for allocating an international securities identification number (ISIN)
BS 7098:1989, ISO 7746:1988. Method of formatting inter-bank telexes for messages relating to the transfer of funds or other financial messages
BS 7099-1:1989, ISO 7982-1:1987. Procedures for telecommunication of funds transfer messages between banksVocabulary and data elements
BS 7100:1990. Method of formatting electronic messages relating to financial transactions for exchange between financial institutions
BS 7101:1989, ISO 8730:1986. Procedures for protecting authentic wholesale messages between financial institutions
BS 7102-1:1989, ISO 8731-1:1987. Recommendations for algorithms for use in banking message authenticationData Encryption Algorithm (DEA)
BS 7102-2:1989, ISO 8731-2:1987. Recommendations for algorithms for use in banking message authentication.Message Authenticator Algorithm
BS 7103:1989, ISO 9019:1987. Method for numbering securities certificates
BS 7104:1990, ISO 9362:1987. Procedure for allocating a Bank Identifier Code (BIC)
BS 7106-1:1989, EN 27811-1:1989,ISO 7811-1:1985. Guide to recording techniques for information on identification cardsEmbossing
BS 7106-2:1989, EN 27811-2:1989,ISO 7811-2:1985. Guide to recording techniques for information on identification cardsMagnetic stripe
BS 7106-3:1989, EN 27811-3:1989,ISO 7811-3:1985. Guide to recording techniques for information on identification cardsGuide to recording techniques for information on identification cards. Location of embossed characters on ID-1 cards
BS 7106-4:1989, EN 27811-4:1989,ISO 7811-4:1985. Guide to recording techniques for information on identification cardsLocation of read-only magnetic tracks-tracks 1 and 2
BS 7106-5:1989, EN 27811-5:1989,ISO 7811-5:1985. Guide to recording techniques for information on identification cardsLocation of read-write magnetic track-track 3
BS 7107:1990, EN 27812:1989,ISO 7812:1987. Procedure for allocating international issuer identification numbers (IINs) for use on identification cards
BS 7108:1990, EN 27813:1989,ISO 7813:1987. Guide to design and use of identification cards as financial transaction cards
BS 7109-3:1990, EN 27816-3:1992,ISO/IEC 7816-3:1989. Guide to design and use of identification cards having integrated circuits with contactsElectronic signals and transmission protocols
BS 7110:1990, ISO 8484:1987. Guide to design and use of savings books with magnetic stripes for information interchange
BS 7111:1991, ISO 8372:1987. Guide to modes of operation for a 64-bit block cipher algorithm
BS 7112:1991, ISO 9160:1988. Procedures for achievement of interoperability and security by use of encipherment at the physical layer of OSI in telecommunication systems conveying automatic data processing information
BS 7113:1989, EN 28798:1991,ISO 8798:1987. Specification for reference levels for narrow-band masking noise
BS 7114-1:1988. FireworksClassification of fireworks
BS 7114-2:1988. FireworksSpecification for fireworks
BS 7114-3:1988. FireworksMethods of test for fireworks
BS 7115-1:1988. Determination of volatile nitrosamines in rubber teats for feeding bottles and babies' dummiesDichloromethane extraction method
BS 7115-2:1988. Determination of volatile nitrosamines in rubber teats for feeding bottles and babies' dummiesArtificial saliva extraction method
BS 7116:1990. Specification for double sided pressure sensitive adhesive tapes
BS 7117-1:1989. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuelSpecification for construction
BS 7117-1:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuelSpecification for construction
BS 7117-2:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuelGuide to installation
BS 7117-3:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuelGuide to maintenance after installation
BS 7118-1:1990, ISO 7066-1:1989. Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement devicesLinear calibration relationships
BS 7118-2:1989, ISO 7066-2:1988. Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement devicesNon-linear calibration relationships
BS 7119:1989, ISO 8042:1988. Specification for shock and vibration measurements: characteristics to be specified for seismic pick-ups
BS 7120:1989. Specification for rating and performance of air to liquid and liquid to liquid chilling packages
BS 7121-1:1989. Code of practice for safe use of cranesGeneral
BS 7121-1:2006. Code of practice for safe use of cranesGeneral
BS 7121-11:1998. Code of practice for safe use of cranesOffshore cranes
BS 7121-12:1999. Code of practice for safe use of cranesRecovery vehicles and equipment. Code of practice
BS 7121-13:2009. Code of practice for safe use of cranesHydraulic gantry lifting systems
BS 7121-14:2005. Code of practice for safe use of cranesSide boom pipelayers
BS 7121-2:1991. Code of practice for safe use of cranesInspection, testing and examination
BS 7121-2:2003. Code of practice for safe use of cranesInspection, testing and examination
BS 7121-2-1:2012. Code of practice for the safe use of cranesInspection, maintenance and thorough examination. General
BS 7121-2-3:2012. Code of practice for the safe use of cranesInspection, maintenance and thorough examination. Mobile cranes
BS 7121-2-4:2013. Code of practice for the safe use of cranesInspection, maintenance and thorough examination. Loader cranes
BS 7121-2-5:2012. Code of practice for the safe use of cranesInspection, maintenance and thorough examination. Tower cranes
BS 7121-2-7:2012. Code of practice for the safe use of cranesInspection, maintenance and thorough examination. Overhead travelling cranes, including portal and semi-portal cranes, hoists, and their supporting structures
BS 7121-2-9:2013. Code of practice for the safe use of cranesInspection, maintenance and thorough examination. Cargo handling and container cranes
BS 7121-3:2000. Code of practice for safe use of cranesMobile cranes
BS 7121-4:1997. Code of practice for safe use of cranesLorry loaders
BS 7121-4:2010. Code of practice for safe use of cranesLorry loaders
BS 7121-5:1997. Code of practice for safe use of cranesTower cranes
BS 7121-5:2006. Code of practice for safe use of cranesTower cranes
BS 7122:1989. Specification for welded steel tanks for the road transport of liquefiable gases
BS 7123:1989. Specification for metal arc welding of steel for concrete reinforcement
BS 7124-1:1989, ISO 8459-1:1988. Bibliographic data element directorySpecification for interloan applications
BS 7125:1989, ISO 5826-1983. Specification for transformers for resistance welding machines
BS 7126-1:1989, ISO 8669-1:1988. Urine collection bags.Glossary of terms
BS 7126-101:1991. Urine collection bagsSpecification for body-worn and non-body-worn bags
BS 7126-2:1989, ISO 8669-2:1988. Urine collection bagsMethod for determination of dimensions
BS 7127-1:1989, ISO 8670-1:1988. Ostomy collection bags.Glossary of terms
BS 7127-101:1991. Ostomy collection bagsSpecification for one-piece and two-piece ostomy collection systems
BS 7128:1989, ISO 6009:1988. Specification for colour coding of hypodermic needles for single use
BS 7129:1989, ISO 5348:1987. Recommendations for mechanical mounting of accelerometers for measuring mechanical vibration and shock
BS 7130:1989, ISO 8821:1988. Specification for mechanical balancing of rotating machinery: shaft and fitment key convention
BS 7131-1:1989. Performance rating of textile floor coverings.Specification for textile floor coverings with yarn pile
BS 7132:1989, IEC 60887:1988. Nomenclature for glass bulb designation system for lamps
BS 7133:1989, IEC 60841:1988. Specification for audio recording - PCM encoder/decoder system
BS 7134-0:1989. Testing of engineering ceramicsIntroduction and guide to sampling
BS 7134-1-1.1:1989. Testing of engineering ceramics. General and textural propertiesMethod for determination of the presence of cracks and other defects by dye penetration tests
BS 7134-1-1.2:1989. Testing of engineering ceramics. General and textural properties.Methods for determination of density and porosity
BS 7134-3.5:1989. Testing of engineering ceramics. Thermo-mechanical propertiesMethods for determination of pyroplastic deformation (sagging)
BS 7134-4.1:1990. Testing of engineering ceramics. Thermo-physical properties.Method for determination of thermal expansion
BS 7134-4-4.2:1990. Testing of engineering ceramics. Thermo-physical propertiesMethod for the determination of thermal diffusivity, by the laser flash (or heat pulse) method
BS 7135-1:1989, EN 27779:1991,ISO 7779:1988. Noise emitted by computer and business equipmentMethod of measurement of airborne noise
BS 7135-2:1989, EN 29295:1991,ISO 9295:1988. Noise emitted by computer and business equipment.Method of measurement of high-frequency noise
BS 7135-3:1989, ISO 9296:1988. Noise emitted by computer and business equipment.Method for determining and verifying declared noise emission values
BS 7136-1:1989, EN 27917:1991,ISO 7917:1987. Brush saws.Method of measurement at the operator's position of emitted airborne noise
BS 7137:1989, ISO 9127:1988. Specification for user documentation and cover information for consumer software packages
BS 7138:1989, EN 29069:1990,ISO 9069:1988. Guide to SGML Document Interchange Format (SDIF)
BS 7139:1989, IEC 60878:1988. Guide to graphical symbols for use on medical electrical equipment
BS 714:1950. Specification. Cartridge fuse-links for use in railway-signalling circuits
BS 7140:1995, ISO 7960:1995. Airborne noise emitted by woodworking machine tools. Operating conditions for woodworking machines
BS 7141-1:1991. Narrow fabricsSpecification for polyamide and polyolefin woven tapes and webbings
BS 7141-2:1991. Narrow fabricsSpecification for cotton webbings for personal load carrying purposes
BS 7141-3:1990. Narrow fabricsSpecification for wool tapes
BS 7141-4:1990. Narrow fabricsSpecification for woven elastic webbings containing natural rubber
BS 7141-5:1990. Narrow fabricsSpecification for elastic flat braids containing natural rubber
BS 7141-6:1989. Narrow fabricsSpecification for laces for footwear and other purposes
BS 7141-7:1991. Narrow fabricsSpecification for woven cotton tapes and webbings
BS 7142-1:1989, ISO 8381:1987. Methods for analysis of milk-based productsDetermination of fat content of milk-based infant foods by the Roese-Gottlieb gravimetric method
BS 7142-2:1989, ISO 8262:1987. Methods for analysis of milk-based productsDetermination of fat content of milk-based infant foods by the Weibull-Berntrop gravimetric method
BS 7142-3:1989, ISO 8262-2:1987. Methods for analysis of milk-based productsDetermination of fat content of milk-based edible ices and ice mixes by the Weibull-Berntrop gravimetric method
BS 7142-4:1989, ISO 8262-3:1987. Methods for analysis of milk-based productsDetermination of fat content of liquid, concentrated and dried milk products by the Weibull-Berntrop gravimetric method
BS 7142-5:1997, ISO 11869:1997. Methods for analysis of milk-based productsDetermination of titratable acidity of yogurt (potentiometric method)
BS 7143:1989. Specification for catheter mounts (flexible adaptors) for use with medical breathing systems
BS 7144:1989. Specification for flax and jute fabrics for industrial use
BS 7145:1990, EN 28652:1989,ISO 8652:1987. Memorandum of the Standardization of the programming language Ada
BS 7146:1990, EN 21539:1989,ISO 1539:1980. Memorandum on the Standardization of the programming language FORTRAN
BS 7148:1990, EN 26160:1989,ISO 6160:1979. Memorandum on the standardization of the programming language PL/1
BS 7149:1990, EN 26373:1989,ISO 6373:1984. Specification for programming language Minimal BASIC
BS 715:1970. Specification for sheet metal flue pipes and accessories for gas fired appliances
BS 715:1986. Specification for metal flue pipes, fittings, terminals and accessories for gas-fired appliances with a rated input not exceeeding 60 kW
BS 715:1989. Specification for metal flue pipes, fittings, terminals and accessories for gas-fire appliances with a rated input not exceeding 60 kW
BS 715:1993. Specification for metal flue pipes, fittings, terminals and accessories for gas-fired appliances with a rated input not exceeding 60 kW
BS 715:2005. Specification for metal flue boxes for gas-fired appliances not exceeding 20 kW
BS 7150:1989. Code of practice for intruder alarm systems with mains wiring communication
BS 7152:1991. Guide to choice of chemical disinfectants
BS 7153:1989, ISO 8790:1987. Guide for computer system configuration diagram (symbols and conventions)
BS 7154:1989, IEC 60914:1988. Specification for conference systems: electrical and audio requirements
BS 7156-1:1990, EN 148-1:1987. Respiratory protective devices: threads for facepiecesSpecification for standard thread connection
BS 7156-2:1990, EN 148-2:1987. Respiratory protective devices: threads for facepiecesSpecification for centre thread connection
BS 7157:1989. Method of test for ignitability of fabrics used in the construction of large tented structures
BS 7158:1989. Specification for plastics inspection chambers for drains
BS 7158:2001. Plastics inspection chambers for drains and sewers. Specification
BS 7159:1989. Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites
BS 7160:1990, EN 24565:1989,ISO 4565:1986. Specification for anchor chains for small craft
BS 7161:1990, EN 24566:1989,ISO 4566:1985. Specification for propeller shaft ends and bosses for inboard-engined pleasure craft
BS 7162:1990, EN 24567:1989,ISO 4567:1978. Specification for waste water fittings on yachts
BS 7163:1990, EN 28847:1989,ISO 8847:1987. Specification for wire rope and pulley steering systems on small craft
BS 7164-10:1994. Chemical tests for raw and vulcanized rubberMethod for preparation and examination of water extract
BS 7164-11.1:1994. Chemical tests for raw and vulcanized rubber. Butadiene rubberMethod for determination of microstructure
BS 7164-11.2:1993. Chemical tests for raw and vulcanized rubber. Butadiene rubberMethod for determination of unsaturation
BS 7164-12:1991, ISO 2453:1991. Chemical tests for raw and vulcanized rubberDetermination of bound styrene content of raw styrene-butadiene rubber; emulsion polymerized: refractive index method
BS 7164-13:1994. Chemical tests for raw and vulcanized rubberMethod for determination of total hydrocarbon content
BS 7164-14:1990, ISO 1408:1987. Chemical tests for raw and vulcanized rubberMethods for determination of carbon black content
BS 7164-14:1996, ISO 1408:1995. Chemical tests for raw and vulcanized rubberMethods for determination of carbon black content
BS 7164-15.1:1994, ISO 9924-1:1993. Chemical tests for raw and vulcanized rubber. Method for thermogravimetric determination of the composition of vulcanizates and uncured compoundsButadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS 7164-2.2:1990, ISO 4661-2:1987. Chemical tests for raw and vulcanized rubber. Sample preparationVulcanized rubber
BS 7164-21:1990, ISO 1656:1988. Chemical tests for raw and vulcanized rubberDetermination of nitrogen content
BS 7164-21:1996, ISO 1656:1996. Chemical tests for raw and vulcanized rubberDetermination of nitrogen content
BS 7164-22.1:1994. Chemical tests for raw and vulcanized rubber. Determination of chlorine contentParr bomb method
BS 7164-22.2:1992, ISO 7725:1991. Chemical tests for raw and vulcanized rubber. Determination of chlorine contentOxygen flask combustion technique for determination of bromine and chlorine
BS 7164-23.1:1993, ISO 6528-1:1992. Chemical tests for raw and vulcanized rubber. Methods for determination of total sulfur contentOxygen combustion flask method
BS 7164-24:1990, ISO 7269:1987. Chemical tests for raw and vulcanized rubberDetermination of extractable sulphur
BS 7164-24:1996, ISO 7269:1995. Chemical tests for raw and vulcanized rubberDetermination of free sulfur
BS 7164-25:1990, ISO 8054:1988. Chemical tests for raw and vulcanized rubberMethod for determination of sulphide sulphur content
BS 7164-25:1996, ISO 8054:1996. Chemical tests for raw and vulcanized rubberMethod for determination of sulfide sulfur content
BS 7164-26.1:1997, ISO 6101-4:1997. Chemical tests for raw and vulcanized rubber. Methods for determination of manganese contentAtomic absorption spectrometry
BS 7164-26-26.1:1990, ISO 6101-4:1988. Chemical tests for raw and vulcanized rubber. Methods for determination of manganese contentAtomic absorption spectrometry
BS 7164-26-26.2:1990, ISO 7780:1987. Chemical tests for raw and vulcanized rubber. Methods for determination of manganese contentSodium periodate photometric methods
BS 7164-27.1:1991, ISO 6101-5:1990. Chemical tests for raw and vulcanized rubber. Methods for determination of iron contentAtomic absorption spectrometry
BS 7164-27.2:1990, ISO 1657:1986. Chemical tests for raw and vulcanized rubber. Methods for determination of iron contentPhotometric method
BS 7164-28.1:1997, ISO 6101-3:1997. Chemical tests for raw and vulcanized rubber. Methods for determination of copper contentAtomic absorption spectrometry
BS 7164-28.2:1995, ISO 8053:1995. Chemical tests for raw and vulcanized rubber. Methods for determination of copper contentPhotometric method
BS 7164-28-28.1:1990, ISO 6101-3:1988. Chemical tests for raw and vulcanized rubber. Methods for determination of copper contentAtomic absorption spectrometry
BS 7164-28-28.2:1990, ISO 8053:1986. Chemical tests for raw and vulcanized rubber. Methods for determination of copper contentPhotometric method
BS 7164-29.1:1992, ISO 6101-1:1991. Chemical tests for raw and vulcanized rubber. Methods for determination of zinc contentAtomic absorption spectrometry
BS 7164-3:1992, ISO 1407:1992. Chemical tests for raw and vulcanized rubberMethods for determination of solvent extract
BS 7164-30.1:1997, ISO 6101-2:1997. Chemical tests for raw and vulcanized rubber. Methods for determination of lead contentAtomic absorption spectrometry
BS 7164-30-30.1:1990, ISO 6101-2:1986. Chemical tests for raw and vulcanized rubber. Methods for determination of lead contentAtomic absorption spectrometry
BS 7164-31.1:1997, ISO 11089:1997. Chemical tests for raw and vulcanized rubber. Determination of anti-degradantsHigh-performance liquid chromatography
BS 7164-32.1:1998, ISO 10398:1998. Chemical tests for raw and vulcanized rubber. Methods for determination of accelerators.Gas and thin layer chromatography
BS 7164-4:1990, ISO 9028:1989. Chemical tests for raw and vulcanized rubberMethods for dissolution of rubber by acid digestion
BS 7164-5:1991, ISO 247:1990. Chemical tests for raw and vulcanized rubberMethods for determination of ash content
BS 7164-6.1:1994. Chemical tests for raw and vulcanized rubber. Methods for determination of volatile matter.Raw rubber
BS 7164-7.1:1990, ISO 5945:1989. Chemical tests for raw and vulcanized rubber. Methods for determination of polymer contentPolyisoprene content
BS 7164-8:1990, ISO 249:1987. Chemical tests for raw and vulcanized rubberMethod for determination of dirt content of raw natural rubber
BS 7164-8:1996, ISO 249:1995. Chemical tests for raw and vulcanized rubberMethod for determination of dirt content of raw natural rubber
BS 7164-9:1990, ISO 7781:1986. Chemical tests for raw and vulcanized rubberMethod for determination of soap and organic acid content in raw styrene-butadiene rubber
BS 7164-9:1997, ISO 7781:1996. Chemical tests for raw and vulcanized rubberMethod for determination of soap and organic acid in raw styrene-butadiene rubber
BS 7165:1991. Recommendations for achievement of quality in software
BS 7166:1989. Specification for wedge and socket anchorages for wire ropes
BS 7167:1990. Specification for Bordeaux connections
BS 7170:1990, EN 145:1988. Specification for respiratory protective devices: self-contained closed-circuit compressed oxygen breathing apparatus
BS 7171:1989. Specification for mobile elevating work platforms
BS 7172:1989. Guide to assessment of position, size and departure from nominal form of geometric features
BS 7174-1:1990. Sterile intravascular catheters and ancillary devices for single useSpecification for general requirements
BS 7174-2:1990. Determination of hydraulic fluid power motor characteristicsSpecification for angiographic catheters
BS 7174-3:1990. Sterile intravascular catheters and ancillary devices for single useSpecification for central venous catheters
BS 7174-4:1990. Sterile intravascular catheters and ancillary devices for single useSpecification for introducer needles, introducer cannulae, guide wires, dilators, valves and connectors
BS 7174-5:1990. Sterile intravascular catheters and ancillary devices for single useSpecification for balloon dilatation catheters
BS 7175:1989. Methods of test for the ignitability of bedcovers and pillows by smouldering and flaming ignition sources
BS 7176:1989. Specification for resistance to ignition of upholstered furniture
BS 7176:1991. Specification for the resistance to ignition of upholstered furniture for non-domestic seating by testing composites
BS 7176:1995. Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
BS 7176:2007+A1:2011. Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
BS 7177:1989. Specification for resistance to ignition of mattresses, divans and bed bases
BS 7177:1991. Specification for resistance to ignition of mattresses, divans and bed bases
BS 7177:1996. Specification for resistance to ignition of mattresses, divans and bed bases
BS 7177:2008+A1:2011. Specification for resistance to ignition of mattresses, mattress pads, divans and bed bases
BS 7178:1989, EN 281:1988. Specification for construction and layout of pedals of self-propelled industrial trucks sit-down rider-controlled
BS 7179-1:1990. Ergonomics of design and use of visual display terminals (VDTs) in officesIntroduction
BS 7179-2:1990. Ergonomics of design and use of visual display terminals (VDTs) in officesRecommendations for the design of office VDT tasks
BS 7179-3:1990. Ergonomics of design and use of visual display terminals (VDTs) in officesSpecification for visual displays
BS 7179-4:1990. Ergonomics of design and use of visual display terminals (VDTs) in officesSpecification for keyboards
BS 7179-5:1990. Ergonomics of design and use of visual display terminals (VDTs) in officesSpecifications for VDT workstations
BS 7179-6:1990. Ergonomics of design and use of visual display terminals (VDTs) in officesCode of practice for the design of VDT work environments
BS 718:1979. Specification for density hydrometers
BS 718:1991. Specification for density hydrometers
BS 7181:1989. Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes
BS 7182:1989. Specification for air-impermeable chemical protective clothing
BS 7183:1989, ISO 8589:1988. Guide to design of test rooms for sensory analysis of food
BS 7184:1989. Recommendations for selection, use and maintenance of chemical protective clothing
BS 7184:2001. Selection, use and maintenance of chemical protective clothing. Guidance
BS 7185:1989. Specification for protective aprons for use with hand knives
BS 7186:1989. Specification for non-domestic gas-fired overhead radiant tube heaters
BS 7187:1989, ISO 9115:1987. Specification for code for bibliographic identification (biblid) of contributions in serials and books
BS 7188:1989. Methods of test for impact absorbing playground surfaces
BS 7188:1998+A2:2009. Impact absorbing playground surfacing. Performance requirements and test methods
BS 7189:1989, IEC 60942:1988. Specification for sound calibrators
BS 7190:1989. Method for assessing thermal performance of low temperature hot water boilers using a test rig
BS 7191:1989. Specification for weldable structural steels for fixed offshore structures
BS 7192:1989. Specification for radiation safety of laser products
BS 7193:1989. Specification for lined lightweight rubber overshoes and overboots
BS 7194:1990. Specification for direct-current and low-frequency electronic measuring instruments with a digital display
BS 7195:1989+A1:2010. Guide for prevention of corrosion of metals caused by vapours from organic materials
BS 7197:1990. Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV
BS 7198-1:1989, ISO 7241-1:1987. Hydraulic fluid power quick-action couplings.Specification for dimensions and performance
BS 7198-2:1989, ISO 7241/2:1986. Hydraulic fluid power quick-action couplingsMethods of test
BS 7200:1989. Specification for synthetic-fibre needlefelts
BS 7201-1:1989. Hydraulic fluid power. Gas loaded accumulatorsSpecification for seamless steel accumulator bodies above 0.5 L water capacity
BS 7201-2:1995, ISO 10945:1994. Hydraulic fluid power. Gas loaded accumulatorsDimensions of gas ports
BS 7202:1989. Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines
BS 7203-1:1989, ISO 8859-1:1987. 8-bit single-byte coded graphic character setsSpecification for Latin alphabet No. 1
BS 7203-2:1989, ISO 8859-2:1987. 8-bit single-byte coded graphic character setsSpecification for Latin alphabet No. 2
BS 7204:1989, ISO 6429:1988. Specification for control functions for ISO 7-bit and 8-bit coded character sets
BS 7205:1990, ISO 8732:1988. Procedures for key management to achieve security for financial institutions engaged in financial transactions (wholesale)
BS 7206:1990. Specification for unvented hot water storage units and packages
BS 7207:1990. Specification for crude vegetable fats
BS 7208-1:1989. Contact lensesSpecification for rigid contact lenses
BS 7208-2:1991. Contact lensesMethod of classifying contact lens materials
BS 7208-3:1992. Contact lensesMethods of test for contact lenses
BS 7209:1990. Specification for water vapour permeable apparel fabrics
BS 721-1:1963. Specification for worm gearingImperial units
BS 7211:1989. Specification for thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire
BS 7211:1994. Specification for thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire
BS 7211:1998. Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire
BS 7211:2012. Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire
BS 721-2:1983. Specification for worm gearingMetric units
BS 7212:1989. Code of practice for safe use of construction hoists
BS 7212:2006. Code of practice for the safe use of construction hoists
BS 7213:1989, ISO 8836:1988. Specification for suction catheters for use in the respiratory tract
BS 7214:1989, EN 23107:1991,ISO 3107:1988. Specification for dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements
BS 7215:1990. Specification for separable insulated cable connector systems above 1 kV and up to 36 kV
BS 7216:1989, IEC 60972:1989. Classification and interpretation of new lighting products
BS 7218:1990, ISO 8072:1986. Open systems interconnection: transport service definition (incorporating connectionless-mode transmission)
BS 7219:1989, ISO 8208:1987. Specification for X.25 packet level protocol for data terminal equipment for information processing systems
BS 7220:1990, ISO 8348:1987. Information processing systems. Data communications. Network service definition
BS 7221:1989, ISO 8648:1988. Open systems interconnection: specification for internal organization of the Network Layer
BS 7222:1990, ISO 8602:1987. Open systems interconnection: connectionless-mode transport protocol specification
BS 7224:1990, ISO 8878:1987. Specification for use of X.25 to provide the OSI connection-mode network service
BS 7225-1-1.1:1989. Classification of refractories. Shaped refractory productsInsulating products
BS 7225-1-1.2:1989. Classification of refractories. Shaped refractory productsAlumina, silica and alumino-silicate products
BS 7225-1-1.3:1989. Classification of refractories. Shaped refractory productsBasic products containing less than 7% carbon
BS 7225-1-1.4:1989. Classification of refractories. Shaped refractory productsBasic products containing more than 7% carbon
BS 7225-2.1:1990. Classification of refractories. Unshaped refractory productsAlumina, silica and alumino-silicate products
BS 7225-2.2:1990. Classification of refractories. Unshaped refractory productsBasic products
BS 7225-3.1:1990. Classification of refractories. Ceramic fibre productsBlankets, mats, felts and paper
BS 7226:1989, ISO 5011:1988. Methods of test for performance of inlet air cleaning equipment for internal combustion engines and compressors
BS 7227:1990. Procedures for the application of ISO 7812 to allocate UK Issuer Identification Numbers (UK IINs) for use on identification cards
BS 7228-1:1989. Industrial robotsGlossary of terms
BS 7228-2:1991, EN 29787:1992,ISO 9787:1990. Industrial robotsGuide to definitions of coordinate systems and motions
BS 7228-3:1991, EN 29946:1992,ISO 9946:1991. Industrial robotsSpecification for the presentation of characteristics by the manufacturer
BS 7228-4-4.1:1991, EN 29283:1992,ISO 9283:1990. Industrial robots. Performance criteria and testingMethods for comprehensive testing
BS 7228-5-5.1:1989, EN 29409-1:1992,ISO 9409-1:1988. Industrial robots. Mechanical interfacesSpecification for circular form (form A)
BS 7228-6:1992, EN 775:1992,ISO 10218:1992. Industrial robotsRecommendations for safety
BS 7229:1989. Guide to quality systems auditing
BS 7230:1989. Code of practice for article theft detection systems
BS 7231-1:1990. Body measurements of boys and girls from birth up to 16.9 yearsInformation in the form of tables
BS 7231-2:1990. Body measurements of boys and girls from birth up to 16.9 yearsRecommendations of body dimensions for children
BS 7232:1990, ISO 9542:1988. Specification for information exchange systems. End system to intermediate system routeing exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service
BS 7234-1:1990. Heat metersSpecification: general requirements
BS 7234-2:1990. Heat metersSpecification for installation
BS 7234-3:1990. Heat metersMethods of test for pattern approval and initial verification
BS 7235:1990, ISO 8473:1988. Open systems interconnection. Specification for protocol to provide the connectionless-mode network service
BS 7236:1989. Code of practice for non-reclosable packaging for solid dose units of medicinal products
BS 7237:1990, IEC 60559:1989. Specification for binary floating point arithmetic for microprocessor systems
BS 7238:1990, IEC 60824:1988. Glossary for terminology related to microprocessors
BS 7240:1990, IEC 60828:1988. Pin allocations for microprocessor systems using the IEC 603-2 connector
BS 7241:1989, IEC 60822:1988. Specification for IEC 822 VSB: parallel sub-system bus of the IEC 821 VME bus
BS 7242:1990, IEC 60821:1987. Specification for IEC 821 bus: microprocessor system bus for 1 to 4 byte data
BS 7243-1:1989, ISO 8656-1:1988. Refractory raw materialsMethod of sampling
BS 7244:1990. Specification for flame arresters for general use
BS 7245:1989, IEC 60948:1988. Specification for numeric keyboard for home electronic systems (HES)
BS 7246:1990, IEC 60907:1988. Guide for local area networks CSMA/DC 10 M bits/s baseband planning and installation
BS 7247:1990, IEC 60847:1989. Guide for characteristics of local area networks (LAN)
BS 7248:1990, ISO 8482:1987. Specification for multipoint interconnection of data communications equipment by twisted pair cable
BS 7249:1990, ISO 9067:1987. Procedures for automatic fault isolation using test loops
BS 7250:1989, ISO 8426:1988. Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
BS 7251-1:1990. Orthopaedic joint prosthesesSpecification for general requirements
BS 7251-10:1992, ISO 7206-6:1992. Orthopaedic joint prosthesesMethod of determination of endurance properties of the head and neck region of stemmed femoral components of hip joint prostheses
BS 7251-11:1993, ISO 7206-7:1993. Orthopaedic joint prosthesesSpecification for endurance of stemmed femoral components without application of torsion
BS 7251-12:1995, ISO 7206-8:1995. Orthopaedic joint prosthesesSpecification for endurance of stemmed femoral components with application of torsion
BS 7251-13:1995, ISO 7206-9:1994. Orthopaedic joint prosthesesMethod for determination of resistance to torque of head fixation of stemmed femoral components
BS 7251-14:1998, ISO 7207-2:1998. Orthopaedic joint prosthesesComponents for partial and total knee-joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials
BS 7251-2:1990, ISO 7207-1:1985. Orthopaedic joint prosthesesSpecification for classification and designation of dimensions for knee joint prostheses
BS 7251-2:1995, ISO 7207-1:1994. Orthopaedic joint prosthesesSpecification for classification, definitions and designation of dimensions of femoral and tibial components for partial and total knee joint prostheses
BS 7251-3:1990. Orthopaedic joint prosthesesSpecification for classification, designation of dimensions and requirements for hip joint prostheses
BS 7251-3:1997, ISO 7206-1:1995. Orthopaedic joint prosthesesSpecification for classification and designation of dimensions for hip joint prostheses
BS 7251-4:1990, ISO 7206-2:1987. Orthopaedic joint prosthesesSpecification for bearing surfaces of hip joint prostheses
BS 7251-4:1997, ISO 7206-2:1996. Orthopaedic joint prosthesesSpecification for articulating surfaces made of metallic, ceramic and plastics materials of hip joint prostheses
BS 7251-5:1990. Orthopaedic joint prosthesesMethod for determination of endurance properties of stemmed femoral components of hip joint prostheses with application of torsion
BS 7251-6:1990, ISO 7206-3:1988. Orthopaedic joint prosthesesMethod for determination of endurance properties of stemmed femoral components of hip joint prostheses without application of torsion
BS 7251-7:1990, ISO TR 9325:1989. Orthopaedic joint prosthesesGuide to hip joint simulators
BS 7251-8:1990, ISO/TR 9326:1989. Orthopaedic joint prosthesesGuide to laboratory evaluation of change of form of bearing surfaces of hip joint prostheses
BS 7251-9:1992, ISO 7206-5:1992. Orthopaedic joint prosthesesMethod of determination of resistance to static load of the head and neck region of stemmed femoral components of hip joint prostheses
BS 7252-1:1990, ISO 5832-1:1987. Metallic materials for surgical implantsSpecification for wrought stainless steel
BS 7252-1:1997, ISO 5832-1:1997. Metallic materials for surgical implantsSpecification for wrought stainless steel
BS 7252-10:1994, ISO 5832-10:1993. Metallic materials for surgical implantsSpecification for wrought titanium 5-aluminium 2.5-iron alloy
BS 7252-10:1997, ISO 5832-10:1996. Metallic materials for surgical implantsSpecification for wrought titanium 5-aluminium 2,5-iron alloy
BS 7252-11:1995, ISO 5832-11:1994. Metallic materials for surgical implantsSpecification for wrought titanium 6-aluminium 7-niobium alloy
BS 7252-12:1997, ISO 5832-12:1996. Metallic materials for surgical implantsSpecification for wrought cobalt-chromium-molybdenum alloy
BS 7252-13:1997, ISO 13782:1996. Metallic materials for surgical implantsSpecification for unalloyed tantalum for surgical implant applications
BS 7252-2:1990, ISO 5832-2:1978. Metallic materials for surgical implants.Specification for unalloyed titanium
BS 7252-2:1994, ISO 5832-2:1993. Metallic materials for surgical implantsSpecification for unalloyed titanium
BS 7252-3:1990. Metallic materials for surgical implantsSpecification for wrought titanium 6-aluminium 4-vanadium alloy
BS 7252-4:1990, ISO 5832-4:1978. Metallic materials for surgical implantsSpecification for cobalt-chromium-molybdenum casting alloy
BS 7252-4:1997, ISO 5832-4:1996. Metallic materials for surgical implantsSpecification for cobalt-chromium-molybdenum casting alloy
BS 7252-5:1990, ISO 5832-5:1978. Metallic materials for surgical implants.Specification for wrought cobalt-chromium-tungsten-nickel alloy
BS 7252-5:1994, ISO 5832-5:1993. Metallic materials for surgical implants.Specification for wrought cobalt-chromium-tungsten-nickel alloy
BS 7252-6:1990, ISO 5832-6:1980. Metallic materials for surgical implantsSpecification for wrought cobalt-nickel-chromium-molybdenum alloy
BS 7252-6:1997, ISO 5832-6:1997. Metallic materials for surgical implantsSpecification for wrought cobalt-nickel-chromium-molybdenum alloy
BS 7252-7:1990, ISO 5832-7:1984. Metallic materials for surgical implants.Specification for cobalt-chromium-nickel-molybdenum-iron alloy
BS 7252-7:1994, ISO 5832-7:1994. Metallic materials for surgical implantsSpecification for cobalt-chromium-nickel-molybdenum-iron alloy
BS 7252-8:1990, ISO 5832-8:1984. Metallic materials for surgical implantsSpecification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
BS 7252-8:1997, ISO 5832-8:1997. Metallic materials for surgical implantsSpecification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
BS 7252-9:1990. Metallic materials for surgical implants.Specification for high-nitrogen stainless steel
BS 7252-9:1993, ISO 5832-9:1992. Metallic materials for surgical implantsSpecification for high-nitrogen stainless steel
BS 7253-1:1990. Non-metallic materials for surgical implants.Specification for acrylic bone cement
BS 7253-1:1993, ISO 5833:1992. Non-metallic materials for surgical implantsSpecification for acrylic resin cement
BS 7253-2:1990, ISO 6474:1981. Non-metallic materials for surgical implantsSpecification for ceramic materials based on alumina
BS 7253-2:1997, ISO 6474:1994. Non-metallic materials for surgical implantsSpecification for ceramic materials based on high purity alumina
BS 7253-3:1990. Non-metallic materials for surgical implants.Specification for surgical implants made of heat-vulcanized silicone elastomer
BS 7253-4:1990. Non-metallic materials for surgical implantsSpecification for ultra-high molecular mass polyethylene in powder form
BS 7253-5:1990. Non-metallic materials for surgical implantsSpecification for ultra-high molecular mass polyethylene in moulded form
BS 7253-6:1997, ISO 13356:1997. Non-metallic materials for surgical implantsSpecification for ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
BS 7254-1:1990, ISO 6018:1987. Orthopaedic implantsSpecification for marking, packaging and labelling
BS 7254-2:1990. Orthopaedic implantsSpecification for general requirements for materials and finish
BS 7254-3:1990. Orthopaedic implantsRecommendations for care and handling
BS 7254-4:1990. Orthopaedic implantsRecommendations for retrieval and examination of implants and associated tissues
BS 7254-5:1990. Orthopaedic implantsSpecification for production of castings made of cobalt-chromium-molybdenum alloy
BS 7254-6.2:1990. Orthopaedic implants. ForgingsMethod for specifying forgings
BS 7254-6-6.1:1990. Orthopaedic implants. ForgingsSpecification for production of forgings
BS 7255:1989. Code of practice for safe working on lifts
BS 7255:2001 (pocket book a6)
BS 7255:2001. Code of practice for safe working on lifts
BS 7255:2012. Code of practice for safe working on lifts
BS 7256:1990. Specification for roomheaters burning wood logs
BS 7257:1989. Methods for radiographic examination of fusion welded branch and nozzle joints in steel
BS 7258-1:1990. Laboratory fume cupboardsSpecification for safety and performance
BS 7258-1:1994. Laboratory fume cupboardsSpecification for safety and performance
BS 7258-2:1990. Laboratory fume cupboardsRecommendations for the exchange of information and recommendations for installation
BS 7258-2:1994. Laboratory fume cupboardsRecommendations for the exchange of information and recommendations for installation
BS 7258-3:1990. Laboratory fume cupboardsRecommendations for selection, use and maintenance
BS 7258-3:1994. Laboratory fume cupboardsRecommendations for selection, use and maintenance
BS 7258-4:1994. Laboratory fume cupboardsMethod for determination of the containment value of a laboratory fume cupboard
BS 7259:1989. Specification for non-electrical, human-powered medical suction equipment
BS 7260:1989, IEC 60961:1989. Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type L
BS 7261:1990. Safety of small non-domestic flueless space heaters burning 3rd family gases
BS 7262:1990. Specification for automatic safe load indicators
BS 7263-1:1990. Precast concrete flags, kerbs, channels, edgings and quadrantsSpecification
BS 7263-1:1994. Precast concrete flags, kerbs, channels, edgings and quadrantsSpecification
BS 7263-1:2001. Precast concrete flags, kerbs, channels, edgings and quadrantsPrecast, unreinforced concrete paving flags and complementary fittings. Requirements and test methods
BS 7263-2:1990. Precast concrete flags, kerbs, channels, edgings and quadrantsCode of practice for laying
BS 7263-3:2001. Precast concrete flags, kerbs, channels, edgings and quadrantsPrecast, unreinforced concrete kerbs, channels, edgings and quadrants. Requirements and test methods
BS 7264-1:1990, IEC 60871-1:1987. Shunt capacitors for a.c. power systems having a rated voltage above 1000 VSpecification for performance, testing and use
BS 7264-2:1990, IEC 60871-2:1987. Shunt capacitors for a.c. power systems having a rated voltage above 1000 VGuide to endurance testing
BS 7265:1990. Code of practice for assessing the cleanliness of hydraulic fluid power components
BS 7266-1:1990, EN 28877:1989,ISO 8877:1987. Connectors for access to the Integrated Services Digital Network (ISDN)Specification for a Basic Access Interface connector and its contact assignments
BS 7267:1990, ISO/IEC TR 10029:1989. Open systems interconnection: guide to operation of an X.25 interworking unit
BS 7268:1990. Method of test for determination of fatigue pressure rating of metal pressure containing envelopes in hydraulic fluid power systems
BS 7269-1:1991. Drycleanability of leather garmentsSpecification for drycleanability and for appropriate care labels
BS 7269-2:1991. Drycleanability of leather garmentsMethod for assessing drycleanability
BS 727:1983. Specification for radio-interference measuring apparatus
BS 7270:1990. Method for constant amplitude strain controlled fatigue testing
BS 7270:2006. Metallic materials. Constant amplitude strain controlled axial fatigue. Method of test
BS 7271:1990. Specification for touch and close fasteners
BS 7272:1990. Specification for safety caps for writing and marking instruments
BS 7272-1:2000. Writing and marking instrumentsSpecification for safety caps
BS 7272-1:2008. Writing and marking instrumentsSpecification for caps to reduce the risk of asphyxiation
BS 7272-2:2000. Writing and marking instrumentsSpecification for end closures
BS 7272-2:2008. Writing and marking instrumentsSpecification for end closures to reduce the risk of asphyxiation
BS 7273-1:1990. Code of practice for the operation of fire protection measuresElectrical actuation of gaseous total flooding extinguishing systems.
BS 7273-1:2000. Code of practice for the operation of fire protection measuresElectrical actuation of gaseous total flooding extinguishing systems
BS 7273-1:2006. Code of practice for the operation of fire protection measuresElectrical actuation of gaseous total flooding extinguishing systems
BS 7273-2:1992. Code of practice for the operation of fire protection measuresMechanical actuation of gaseous total flooding and local application extinguishing systems
BS 7273-3:2000. Code of practice for the operation of fire protection measuresElectrical actuation of pre-action sprinkler systems
BS 7273-3:2008. Code of practice for the operation of fire protection measuresElectrical actuation of pre-action watermist and sprinkler systems
BS 7273-4:2007. Code of practice for the operation of fire protection measuresActuation of release mechanisms for doors
BS 7273-5:2008. Code of practice for the operation of fire protection measures Electrical actuation of watermist systems (except pre-action systems)
BS 7274:1990, ISO 7970:1989. Specification for wheat
BS 7275-1:1990, ISO 4392-1:1989. Determination of hydraulic fluid power motor characteristicsMethod at constant low speed and at constant pressure
BS 7275-2:1990, ISO 4392-2:1989. Determination of hydraulic fluid power motor characteristicsMethod for startability
BS 7275-3:1995, ISO 4392-3:1993. Determination of hydraulic fluid power motor characteristicsMethod at constant flow and at constant torque
BS 7276:1990, ISO 7941:1988. Method for gas chromatographic analysis of liquefied petroleum gas
BS 7277:1990, ISO 1478:1983. Specification for tapping screw threads
BS 7278:1990. Specification for gas tightness of equipment for gas welding and allied processes
BS 7279:1990, ISO 7286-1986. Specification for graphical symbols for resistance welding equipment
BS 7280:1990, EN 272:1989. Specification for requirements for tactile danger warnings for packaging
BS 7281:1990. Specification for polyethylene pipes for the supply of gaseous fuels
BS 7282:1990. Field test method for determining the relative protective effectiveness of a wood preservative in ground contact
BS 7283:1990, EN 60691:1987. Specification for requirements and application guide for thermal-links
BS 7285:1990, ISO 8626:1989. Method for describing characteristics of servo-hydraulic test equipment for generating vibration
BS 7287:1990, ISO 7745:1989. Guide for the use of fire-resistant hydraulic fluids
BS 7288:1990. Specification for socket outlets incorporating residual current devices (S.R.C.D.s)
BS 7289:1990. Specification for dimensions of three-piece tinplate aerosol cans
BS 729:1971. Specification for hot dip galvanized coatings on iron and steel articles
BS 7291-1:1990. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsGeneral requirements
BS 7291-1:2001. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsGeneral requirements
BS 7291-1:2006. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsGeneral requirements
BS 7291-1:2010. Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildingsGeneral requirements
BS 7291-2:1990. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsSpecification for polybutylene (PB) pipes and associated fittings
BS 7291-2:2001. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsSpecification for polybutylene (PB) pipes and associated fittings
BS 7291-2:2006. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsSpecification for polybutylene (PB) pipes and associated fittings
BS 7291-2:2010. Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildingsSpecification for polybutylene (PB) pipe and associated fittings
BS 7291-3:1990. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsSpecification for crosslinked polyethylene (PE-X) pipes and associated fittings
BS 7291-3:2001. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsSpecification for cross-linked polyethylene (PE-X) pipes and associated fittings
BS 7291-3:2006. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsSpecification for cross-linked polyethylene (PE-X) pipes and associated fittings
BS 7291-3:2010. Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildingsSpecification for crosslinked polyethylene (PE-X) pipes and associated fittings
BS 7291-4:1990. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildingsSpecification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement
BS 7292:1990, ISO 8884:1989. Specification for layout and operation of keyboards for multiple latin-alphabet languages
BS 7293:1990, ISO 8524:1986. Method of test for equipment for distributing granulated pesticides or herbicides
BS 7294:1990, ISO 6358:1989. Methods for determination of flow-rate characteristics of pneumatic fluid power components
BS 7295-1:1990. Fusion bonded epoxy coated carbon steel bars for the reinforcement of concreteSpecification for coated bars
BS 7295-2:1990. Fusion bonded epoxy coated carbon steel bars for the reinforcement of concreteSpecification for coatings
BS 7296-1:1990, ISO 7368:1989. Cavities for hydraulic fluid power cartridge valvesSpecification for two-port slip-in valves
BS 7297-1:1990, ISO 8637:1989. Haemodialysers and related equipmentSpecification for haemodialysers, haemofilters and haemoconcentrators
BS 7297-2:1990, ISO 8638:1989. Haemodialysers and related equipmentSpecification for extracorporeal circuits for use with haemodialysers, haemofilters and haemoconcentrators
BS 7298:1990. Schedule of requirements and recommendations for cards to be used in electronic funds transfer at point of sale (EFT-POS)
BS 7299-1:1990, ISO 8613-1:1989. Office document architecture (ODA) and interchange format for text and office systemsIntroduction and general principles
BS 7299-2:1990, ISO 8613-2:1989. Office document architecture (ODA) and interchange format for text and office systemsDocument structures
BS 7299-4:1990, ISO 8613-4:1989. Office document architecture (ODA) and interchange format for text and office systemsDocument profile
BS 7299-5:1990, ISO 8613-5:1989. Office document architecture (ODA) and interchange format for text and office systemsOffice document interchange format (ODIF)
BS 7299-6:1990, ISO 8613-6:1989. Office document architecture (ODA) and interchange format for text and office systemsCharacter content architectures
BS 7299-7:1990, ISO 8613-7:1989. Office document architecture (ODA) and interchange format for text and office systemsRaster graphics content architectures
BS 7299-8:1990, ISO 8613-8:1989. Office document architecture (ODA) and interchange format for text and office systemsGeometric graphics content architectures
BS 7300:1990. Code of practice for safeguarding of the hazard points on troughed belt conveyors
BS 7302:1990, IEC 60975:1989. Specification for microprocessor universal format object modules
BS 7303-1:1990, EN 277:1989. Sacks for the transport of food aidSpecification for sacks made of polypropylene fabric
BS 7305:1990. Method for determination of the maximum safe ironing temperature of fabrics
BS 7306:1990. Procedures for the operation of the UK scheme for the allocation of ISO-DCC format OSI NSAP addresses (including the operation of the UK Registration Authority)
BS 7306:1995. Procedures for the operation of the UK scheme for the allocation of ISO DCC format OSI Network Layer addresses (including the operation of the associated UK Registration Authority)
BS 7307-1:1990, ISO 7976-1:1990. Building tolerances. Measurement of buildings and building productsMethods and instruments
BS 7307-2:1990, ISO 7976-2:1989. Building tolerances. Measurement of buildings and building productsPosition of measuring points
BS 7308:1990, ISO 7737:1986. Method for presentation of dimensional accuracy data in building constructions
BS 7309:1990, EN 142:1989. Specification for mouthpiece assemblies for respiratory protective devices
BS 7310:1990. Specification for ion-selective electrodes, reference electrodes, combination electrodes and ion-selective electrode meters for determination of ions in solution
BS 731-1:1952. Flexible steel conduit for cable protection and flexible steel tubing to enclose flexible drivesFlexible steel conduit and adaptors for the protection of electric cable
BS 7311-1:1990. Cabinet towelsSpecification
BS 7311-2:1993. Cabinet towelsSpecification for processing
BS 731-2:1958. Specification. Flexible steel conduit for cable protection and flexible steel tubing to enclose flexible drives.Flexible steel tubing to enclose flexible drives for power driven tools for general purposes
BS 7312:1990, ISO 8833:1989. Methods of test for magnetite for use in coal preparation
BS 7313-1.1:1990, ISO 8549-1:1989. Prosthetics and orthotics. TerminologyGlossary of general terms relating to external limb prostheses and external orthoses
BS 7313-1.2:1990, ISO 8549-2:1989. Prosthetics and orthoticsGlossary of terms relating to external limb prostheses and wearers of external limb prostheses
BS 7313-1.3:1990, ISO 8549-3:1989. Prosthetics and orthotics. TerminologyGlossary of terms relating to external orthoses
BS 7313-2:1990, ISO 8548-1:1989. Prosthetics and orthoticsMethod of describing limb deficiencies present at birth
BS 7313-3:1993, ISO 8548-2:1993. Prosthetics and orthoticsMethod of describing lower limb amputation stumps
BS 7313-4:1993, ISO 8548-3:1993. Prosthetics and orthoticsMethod of describing upper limb amputation stumps
BS 7314:1990. Specification for electric stunners for poultry
BS 7315:1990+A1:1993, EN 50064:1989+A1:1993. Specification for wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
BS 7316:1990. Specification for design and construction of screw and related type compressors for the process industry
BS 7317-1:1990. Methods for analysis of high purity copper cathode Cu-CATH-1Method for determination of cadmium, manganese and silver (screening procedure for chromium, cobalt, iron, nickel and zinc) by atomic absorption spectrophotometry
BS 7317-2:1990. Methods for analysis of high purity copper cathode Cu-CATH-1Method for determination of chromium, cobalt, iron, nickel and zinc by discrete volume nebulization atomic absorption spectrophotometry
BS 7317-3:1990. Methods for analysis of high purity copper cathode Cu-CATH-1Method for determination of antimony, arsenic, bismuth, selenium, tellurium and tin by hydride generation and atomic absorption spectrophotometry
BS 7317-4:1990. Methods for analysis of high purity copper cathode Cu-CATH-1Method for determination of antimony, arsenic, bismuth, lead, selenium, tellurium and tin by electrothermal atomization atomic absorption spectrophotometry
BS 7317-5:1990. Methods for analysis of high purity copper cathode Cu-CATH-1Method for determination of sulphur by hydrogen sulphide evolution and spectrophotometry
BS 7317-6:1990. Methods for analysis of high purity copper cathode Cu-CATH-1Method for determination of phosphorus and silicon by spectrophotometry
BS 7317-7:1990. Methods for analysis of high purity copper cathode Cu-CATH-1Method for determination of lead by lanthanum hydroxide separation and atomic absorption spectrophotometry
BS 7318:1990. Specification for industrial sewing threads made from linen (flax) or cotton
BS 7319-1:1990, ISO 2481:1973. Analysis of sodium chloride for industrial useMethod for determination of sodium chloride content
BS 7319-10:1990. Analysis of sodium chloride for industrial useMethod for determination of pH and total alkalinity
BS 7319-11:1990. Analysis of sodium chloride for industrial useMethod for determination of iron content
BS 7319-12:1990. Analysis of sodium chloride for industrial useMethods for determination of anti-caking additives content of salt for food use
BS 7319-2:1990, ISO 2483:1973. Analysis of sodium chloride for industrial useMethod for determination of moisture content
BS 7319-3:1990, ISO 2479:1972. Analysis of sodium chloride for industrial useMethod for determination of matter insoluble in water or in acid
BS 7319-4:1990, ISO 2480:1972. Analysis of sodium chloride for industrial useMethod for determination of sulphate content
BS 7319-5:1990, ISO 2482:1973. Analysis of sodium chloride for industrial useMethod for determination of calcium and magnesium contents
BS 7319-6:1990. Analysis of sodium chloride for industrial useMethod for determination of cadmium content
BS 7319-7:1990. Analysis of sodium chloride for industrial useMethod for determination of copper content
BS 7319-8:1990. Analysis of sodium chloride for industrial useMethod for determination of lead content
BS 7319-9:1990. Analysis of sodium chloride for industrial useMethod for determination of mercury content
BS 7320:1990. Specification for sharps containers
BS 7321:1990, ISO 8011:1988. Specification for design and construction of turbo-type compressors for the process industry
BS 7322:1990, ISO 8012:1988. Specification for design and construction of reciprocating type compressors for the process industry
BS 7323:1990. Specification for sit harnesses for rock climbing
BS 7324:1990, ISO 7000:1989. Guide to graphical symbols for use on equipment
BS 7325:1990, ISO 9895:1989. Method for determination of the compressive strength of paper and board by the short span test
BS 7326-1:1990, EN 255-1:1988. Specification for rating and performance of heat pumps with electrically driven compressorsTerms, definitions and designations
BS 7327-1:1990. Small fixed fire extinguishersSpecification for small fixed halon fire extinguishers
BS 7328:1990. Specification for model steam engines and internal combustion engines for models
BS 7329:1990, ISO 9539:1988. Specification for materials for equipment used in gas welding, cutting and allied processes
BS 7330-1:1990, ISO 8979:1988. Pliers and nippers for electronicsNomenclature
BS 7330-2:1990, ISO 9657:1989. Pliers and nippers for electronics.Specification for general requirements
BS 7330-3:1990, ISO 9656:1989. Pliers and nippers for electronicsMethods of test
BS 7330-4:1990, ISO 9655:1989. Pliers and nippers for electronicsSpecification for dimensions of single-purpose pliers for gripping and manipulating
BS 7330-5:1990, ISO 9654:1989. Pliers and nippers for electronicsSpecification for dimensions of single-purpose cutting nippers
BS 733-1:1983, ISO 3507-1976. PyknometersSpecification
BS 7331:1990. Specification for direct surfaced wood chipboard based on thermosetting resins
BS 733-2:1987. PyknometersMethods for calibration and use of pyknometers
BS 7332:1990. Specification for decorative continuous laminates (DCL) based on thermosetting resins
BS 7333:1990. Specification for slewing jib cranes
BS 7334-1:1990, ISO 8322-1:1989. Measuring instruments for building constructionMethods for determining accuracy in use: theory
BS 7334-2:1990, ISO 8322-2:1989. Measuring instruments for building constructionMethods for determining accuracy in use: measuring tapes
BS 7334-3:1990, ISO 8322-3:1989. Measuring instruments for building constructionMethods for determining accuracy in use: optical levelling instruments
BS 7334-4:1992, ISO 8322-4:1991. Measuring instruments for building constructionMethods for determining accuracy in use of theodolites
BS 7334-5:1992, ISO 8322-5:1991. Measuring instruments for building constructionMethods for determining accuracy in use of optical plumbing instruments
BS 7334-6:1992, ISO 8322-6:1991. Measuring instruments for building constructionMethods for determining accuracy in use of laser instruments
BS 7334-7:1992, ISO 8322-7:1991. Measuring instruments for building constructionMethods for determining accuracy in use of instruments when used for setting out
BS 7334-8:1992, ISO 8322-8:1992. Measuring instruments for building constructionMethods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS 7335-1:1991. Installation of monolithic refractoriesCode of practice for installation by casting
BS 7335-2:1991. Installation of monolithic refractoriesCode of practice for installation by gunning
BS 7336:1990. Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels
BS 7337:1990. Specification for tickings
BS 7339:1990. Code of practice for supplementary checking of metallic materials of construction in pressurized systems
BS 734-1:1973. Measurement of the density of milk using a hydrometerSpecification for hydrometers for use in milk
BS 734-2:1959. Measurement of the density of milk using a hydrometerMethods
BS 7342:1990, ISO 8498:1989. Glossary of terms for defects in woven fabrics
BS 7343:1990, ISO 8499:1990. Glossary of terms for defects in knitted fabrics
BS 7344:1990. Specification for reeled low density polyethylene film for general purpose application
BS 7345:1990, ISO 888:1976. Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts
BS 7346-1:1990. Components for smoke and heat control systemsSpecification for natural smoke and heat exhaust ventilators
BS 7346-2:1990. Components for smoke and heat control systemsSpecification for powered smoke and heat exhaust ventilators
BS 7346-3:1990. Components for smoke and heat control systemsSpecification for smoke curtains
BS 7346-4:2003. Components for smoke and heat control systemsFunctional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires. Code of practice
BS 7346-5:2005. Components for smoke and heat control systemsFunctional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires. Code of practice
BS 7346-6:2005. Components for smoke and heat control systemsSpecifications for cable systems
BS 7346-7:2006. Components for smoke and heat control systemsCode of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks
BS 7346-7:2013. Components for smoke and heat control systemsCode of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks
BS 7347:1990, ISO 8568:1989. Guide for characteristics and performance of mechanical shock testing machines
BS 7348:1990. Specification for electrical apparatus for the detection of combustible gases in domestic premises
BS 7349-1:1993. Blind rivets with break mandrel.Specification for closed end blind rivets
BS 7349-2:1993. Blind rivets with break mandrel.Specification for open end blind rivets
BS 734C:1962. Measurement of the density of milk using a hydrometerPercentage of total solids and non-fatty solids in milk corresponding to given fat content and observed density fat content range 2-6 per cent (with fat in the liquid state)
BS 7350:1990. Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
BS 7351:1990. Specification for metal-sheathed heating elements for industrial use
BS 7352:1990. Specification for strength and durability performance of metal hinges for side hanging applications and dimensional requirements for template drilled hinges
BS 7353:1991. Methods of measuring quality of output of graphic COM recorders
BS 7354:1990. Code of practice for design of high-voltage open-terminal stations
BS 7355:1990, EN 136:1989. Specification for full face masks for respiratory protective devices
BS 7356:1990, EN 140:1989. Specification for half masks and quarter masks for respiratory protective devices
BS 7357:1990. Specification for 7.5 L WC flushing cisterns
BS 7358:1990. Specification for close coupled suites with flush capacity of 7.5 L maximum
BS 7359:1991. Nomenclature of commercial timbers including sources of supply
BS 7360:1990, IEC 61016:1989. Specification for helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
BS 7361-1:1991. Cathodic protectionCode of practice for land and marine applications
BS 7362:1990. Specification for telex terminal apparatus for connection to public telecommunications operators' telex networks
BS 7363:1990. Method for bead-on-plate (BOP) test for welds
BS 7364:1990. Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards
BS 7365:1990, IEC 60889:1987. Specification for hard drawn aluminium wire for overhead line conductors
BS 7367:1991. Specification for manufacture of glass bottles for carbonated soft drinks including carbonated water
BS 7368:1990. Specification for babies' elastomeric feeding bottle teats
BS 7369:1991. Specification for multi-frequency tone signalling protocol for social alarm systems
BS 7370-1:1991. Grounds maintenanceRecommendations for establishing and managing grounds maintenance organizations and for design considerations related to maintenance
BS 7370-2:1994. Grounds maintenanceRecommendations for the maintenance of hard areas (excluding sports surfaces)
BS 7370-3:1991. Grounds maintenanceRecommendations for maintenance of amenity and functional turf (other than sports turf)
BS 7370-4:1993. Grounds maintenanceRecommendations for maintenance of soft landscape (other than amenity turf)
BS 7370-5:1998. Grounds maintenanceRecommendations for the maintenance of water areas
BS 7371-1:1991. Coatings on metal fastenersSpecification for general requirements and selection guidelines
BS 7371-1:2009. Coatings on metal fastenersSpecification for general requirements and selection guidelines
BS 7371-10:1994. Coatings on metal fasteners.Specification for organic coatings
BS 7371-11:1993. Coatings on metal fastenersSpecification for zinc flake non-electrolytically applied cured coatings
BS 7371-12:2008. Coatings on metal fastenersRequirements for imperial fasteners
BS 7371-2:1993. Coatings on metal fastenersSpecification for torque/clamping force relationship
BS 7371-3:1993. Coatings on metal fastenersSpecification for electroplated zinc and cadmium coatings
BS 7371-3:2009. Coatings on metal fastenersSpecifications for electroplated zinc coatings
BS 7371-4:1994. Coatings on metal fasteners.Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings
BS 7371-6:1998+A1:2011. Coatings on metal fastenersSpecification for hot dipped galvanized coatings
BS 7371-7:1994. Coatings on metal fasteners.Specification for mechanically applied zinc coatings
BS 7371-7:2010. Coatings on metal fastenersSpecification for mechanically applied zinc and zinc based coatings
BS 7371-8:1998. Coatings on metal fastenersSpecification for sherardized coatings
BS 7371-8:2011. Coatings on metal fastenersSpecification for sherardized coatings
BS 7371-9:1996. Coatings on metal fastenersSpecification for phosphate or phosphate and oil coatings
BS 7372-1:1991, ISO 4783-1:1989. Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire clothGeneral
BS 7372-2:1991, ISO 4783-2:1989. Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire clothPreferred combinations for woven wire cloth
BS 7372-3:1993, ISO 4783-3:1981. Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire clothPreferred combinations for pre-crimped or pressure-welded wire screens
BS 7373:1991. Guide to the preparation of specifications
BS 7373-1:2001. Guide to the preparation of specificationsGuide to preparation
BS 7373-2:2001. Product specificationsGuide to identifying criteria for a product specification and to declaring product conformity
BS 7373-3:2005. Product specificationsGuide to identifying criteria for specifying a service offering
BS 7374:1990. Methods of test for water vapour transmission resistance of board materials used in buildings
BS 7375:1991. Code of practice for distribution of electricity on construction and building sites
BS 7375:1996. Code of practice for distribution of electricity on construction and building sites
BS 7375:2010. Distribution of electricity on construction and demolition sites. Code of practice
BS 7376:1990. Specification for inclusion of glass in the construction of tables or trolleys
BS 7376:2004. Inclusion of glass in the construction of tables and trolleys. Specification
BS 7376:2009. Inclusion of glass in the construction of tables and trolleys for domestic use. Specification
BS 7377:1991. Specification for step stools
BS 7377:1994. Specification for step stools
BS 7378-1:1991. Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interfaceGeneral requirements
BS 7378-1:1997. Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interfaceGeneral requirements
BS 7378-2:1991. Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interfaceSpecification for automatic-repeat call attempt facilities
BS 7378-3:1998. Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interfaceRequirements for apparatus for connection to Channel Associated Signalling Systems (CASS)
BS 7379:1991. Specification for plastics/metal laminate collapsible tubes
BS 7383:1990. Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines
BS 7384:1991. Guide to laboratory methods for sampling and analysis of particulate matter generated by arc welding consumables
BS 7385-1:1990, ISO 4866:1990. Evaluation and measurement for vibration in buildingsGuide for measurement of vibrations and evaluation of their effects on buildings
BS 7385-2:1993. Evaluation and measurement for vibration in buildingsGuide to damage levels from groundborne vibration
BS 7386:1990. Specification for draughtstrips for the draught control of existing doors and windows in housing (including test methods)
BS 7386:1997. Specification for draughtstrips for the draught control of existing doors and windows in housing (including test methods)
BS 7387:1991. Method for determination of the bulking thickness, apparent bulk density, compressibility and compressibility index of soft creped tissue paper
BS 7388:1991. Guide for prevention of leaks from hydraulic fluid power systems
BS 7389-1:1990, ISO 5599-1:1989. Pneumatic fluid power valve mounting surfacesSpecification for five-port directional control valves (without electrical connector)
BS 7390:1990, ISO 6079:1990. Specification for instant tea
BS 7391:1990, ISO 2977:1989. Method for determination of aniline point and mixed aniline point of petroleum products and hydrocarbon solvents
BS 7392:1990, ISO 3405:1988. Method for determination of distillation characteristics of petroleum products
BS 7393:1990, ISO 7537:1989. Method for determination of total acid number in petroleum products by semi-micro colour indicator titration
BS 7394-1:1991. Complete spectaclesSpecification for ready-to-wear near-vision spectacles
BS 7394-1:1996. Complete spectaclesSpecification for ready-to-wear near-vision spectacles
BS 7394-2:1994. Complete spectaclesSpecification for prescription spectacles
BS 7394-2:2007. Complete spectaclesSpecification for prescription spectacles
BS 7395:1991, EN 60934:1990. Specification for circuit-breakers for equipment (CBE)
BS 7396:1991. Specification for permanent preformed road markings
BS 7397:1991. Methods of test for mattresses, bed bases and bed sets
BS 7398:1991. Specification for hand hacksaw frames
BS 7399:1991. Method for determination of delamination force of textile floor coverings
BS 7402:1991. Guide to specifying electronic typographic markup (SETM)
BS 7403-1:1998, ISO 4548-1:1997. Full-flow lubricating oil filters for internal combustion enginesMethods of test for differential pressure/flow characteristics
BS 7403-11:1998, ISO 4548-11:1997. Full-flow lubricating oil filters for internal combustion enginesMethods of test for self-cleaning filters
BS 7403-12:2000, ISO 4548-12:2000. Full-flow lubricating oil filters for internal combustion enginesFiltration efficiency using particle counting, and contaminant retention capacity
BS 7403-13:1991, ISO 6415:1990. Full-flow lubricating oil filters for internal combustion engines.Specification for dimensions of spin-on filters
BS 7403-2:1998, ISO 4548-2:1997. Full-flow lubricating oil filters for internal combustion enginesMethod of test for element by-pass valve characteristics
BS 7403-3:1998, ISO 4548-3:1997. Full-flow lubricating oil filters for internal combustion enginesMethods of test for resistance to high differential pressure and to elevated temperature
BS 7403-4:1998, ISO 4548-4:1997. Full-flow lubricating oil filters for internal combustion enginesMethods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
BS 7403-5:1991, ISO 4548-5:1990. Full-flow lubricating oil filters for internal combustion engines.Method of test for cold start simulation and hydraulic pulse durability
BS 7403-6:1991, ISO 4548-6:1985. Full-flow lubricating oil filters for internal combustion engines.Method of test for static burst pressure
BS 7403-7:1991, ISO 4548-7:1990. Full-flow lubricating oil filters for internal combustion engines.Method of test for vibration fatigue
BS 7403-8:1991, ISO 4548-8:1989. Full-flow lubricating oil filters for internal combustion enginesMethod of test for inlet anti-drain valves
BS 7403-9:1995, ISO 4548-9:1995. Full-flow lubricating oil filters for internal combustion enginesMethod of test for inlet and outlet anti-drain valves
BS 7404-1.1:1991, IEC 60870-1-1:1988. Telecontrol equipment and systems. General considerations.General principles
BS 7404-1.2:1991, IEC 60870-1-2:1989. Telecontrol equipment and systems. General considerationsGuide for specifications
BS 7404-1.4:1995, IEC 60870-1-4:1994. Telecontrol equipment and systems. General considerationsGuide for basic aspects of telecontrol data transmission and organization of standards BS 7404- 5 and BS 7404- 6
BS 7404-1-1.3:1991, IEC 60870-1-3:1990. Telecontrol equipment and systems. General considerationsGlossary
BS 7404-2-2.1:1991. Telecontrol equipment and systems. Operating conditionsSpecification for classes of environmental conditions and power supplies
BS 7404-3:1991, IEC 60870-3:1989. Telecontrol equipment and systemsSpecification for interfaces (electrical characteristics)
BS 7404-4:1991, IEC 60870-4:1990. Telecontrol equipment and systems.Specification for performance
BS 7405:1991. Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
BS 7406:1991, ISO 9932:1990. Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods
BS 7407:1991. Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children
BS 7409:1991. Specification for safety requirements for wheeled child conveyances
BS 7409:1996. Specification for safety requirements for wheeled child conveyances
BS 7410:1991, ISO 9045:1990. Glossary of terms used in industrial screening
BS 7411:1991. Specification for lever operated knapsack sprayers
BS 7412:1991. Specification for plastics windows made from PVC-U extruded hollow profiles
BS 7412:2002. Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification
BS 7412:2007. Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
BS 7413:1991. Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type A
BS 7413:2002. Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors. Specification
BS 7414:1991. Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B
BS 7416:1991. Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
BS 7417:1991. Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
BS 7418:1991. Code of practice for isolation of the welding circuit in arc welding plant
BS 7419:1991. Specification for holding down bolts
BS 7419:2012. Specification for holding down bolts
BS 7420:1991. Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
BS 7421:1991, ISO 5350-2:1990. Method for estimation of dirt and shives in bleached pulp
BS 7423:1991. Specification for safety requirements for children's travel cots of internal base length not less than 900 mm
BS 7423:1999. Specification for safety requirements for children's travel cots of internal base length not less than 900 mm
BS 7424:1991, ISO 5628:1990. Guide to general principles for determination of the bending stiffness of paper and board by static methods
BS 7425-1:1991, ISO 9136:1989. Abrasive grains.Method for the determination of the bulk density of macrograins
BS 7425-2:1991, ISO 9137:1990. Abrasive grains.Method for determining the capillarity
BS 7425-3:1993, ISO 9138:1993. Abrasive grains.Method for sampling and splitting
BS 7425-4:1993, ISO 9284:1992. Abrasive grainsSpecification for test-sieving machines
BS 7427:1991, ISO 5647:1990. Method for determination of titanium dioxide content of paper and board
BS 7428:1991, ISO 2624:1990. Method for estimating the average grain size of copper and copper alloys
BS 7429:1991. Specification for television receivers and monitors for use in education and training
BS 743:1970. Specification for materials for damp-proof courses
BS 7430:1991. Code of practice for earthing
BS 7430:1998. Code of practice for earthing
BS 7430:2011. Code of practice for protective earthing of electrical installations
BS 7431:1991, ISO 9808:1990. Method for assessing solar water heaters. Elastomeric materials for absorbers, connecting pipes and fittings
BS 7432:1991, EN 29997:1992,ISO 9997:1990. Specification for dental cartridge syringes
BS 7433-1:1991. Cross recessed machine screwsSpecification for pan head screws of product grade A
BS 7433-2:1991. Cross recessed machine screwsSpecification for countersunk flat head screws product grade A and property class 4.8 only
BS 7433-3:1991. Cross recessed machine screwsSpecification for raised countersunk head screws product grade A
BS 7435-1:1991. Fibre cement flue pipes, fittings and terminalsSpecification for light quality fibre cement flue pipes, fittings and terminals
BS 7435-2:1991. Fibre cement flue pipes, fittings and terminalsSpecification for heavy quality fibre cement flue pipes, fittings and terminals
BS 7436:1996. Specification for data transfer between agricultural tractors and attached machinery (data bus protocol)
BS 7436-1:1991. Data transfer between agricultural tractors and attached machinerySpecification for data bus protocol
BS 7438:1991. Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 7439:1991, ISO 9688:1990. Method for exchange of information for the analytical assessment of shock resistance of mechanical systems
BS 7440:1991, ISO 9059:1990. Method for calibrating field pyrheliometers by comparison to a reference pyrheliometer
BS 7442-0:1991. Rubber or plastics covered rollersIntroduction
BS 7442-1:1991, ISO/TR 8517:1988. Rubber or plastics covered rollersGlossary of terms
BS 7442-2:1991, ISO/TR 7621-2:1982. Rubber or plastics covered rollersRecommendations for technical information to be provided by the purchaser
BS 7442-3.1:1998, ISO 7267-1:1997. Rubber or plastics covered rollers. Method of testDetermination of apparent hardness (IRHD method)
BS 7442-3.2:1991, ISO 7267-2:1986. Rubber or plastics covered rollers. Method of testDetermination of Shore hardness
BS 7442-3.3:1992, ISO 7267-3:1988. Rubber or plastics covered rollers. Method of testDetermination of apparent hardness by the Pusey and Jones method
BS 7442-3-3.1:1991, ISO 7267/1:1986. Rubber or plastics covered rollers. Method of testDetermination of apparent hardness (IRHD method)
BS 7442-4.1:1992. Rubber or plastics covered rollers. RequirementsSpecification for apparent hardness
BS 7442-4.2:1994. Rubber or plastics covered rollers. RequirementsClassification by surface finish
BS 7442-4.3:1993, ISO 6123-3:1985. Rubber or plastics covered rollers. RequirementsSpecification for dimensional tolerances
BS 7443:1991. Specification for sound systems for emergency purposes
BS 7444:1991. Specification for molecular sieves (of type 4A)
BS 7445-1:1991, ISO 1996-1:1982. Description and measurement of environmental noiseGuide to quantities and procedures
BS 7445-1:2003. Description and measurement of environmental noiseGuide to quantities and procedures
BS 7445-2:1991, ISO 1996-2:1987. Description and measurement of environmental noiseGuide to the acquisition of data pertinent to land use
BS 7445-3:1991, ISO 1996-3:1987. Description and measurement of environmental noiseGuide to application to noise limits
BS 7446:1991, ISO 3711:1990. Specification for lead chromate pigments and lead chromate-molybdate pigments for paints
BS 7447:1991. Method of test for determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources
BS 7448-1:1991. Fracture mechanics toughness testsMethod for determination of KIc, critical CTOD and critical J values of metallic materials
BS 7448-2:1997. Fracture mechanics toughness testsMethod for determination of KIc, critical CTOD and critical J values of welds in metallic materials
BS 7448-3:2005. Fracture mechanics toughness testsMethod for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
BS 7448-4:1997. Fracture mechanics toughness testsMethod for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
BS 7449:1991. Specification for inclusion of glass in the construction of furniture, other than tables or trolleys, including cabinets, shelving systems and wall hung or free standing mirrors
BS 745:1969. Specification for animal glue for wood (joiners's glue) (dry glue; jelly or liquid glue)
BS 7450:1991, IEC 61059:1991. Method for determination of economic optimization of power cable size
BS 7451:1991. Specification for archival quality bookbinding leather
BS 7452:1991, IEC 60989:1991. Specification for separating transformers, autotransformers, variable transformers and reactors
BS 7453-1:1991. Procedures for UK registration for Open Systems standards.Procedures for the UK Name Registration Authority
BS 7454:1991+A1:2008, IEC 60949:1988. Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
BS 7455-1:1991, ISO 7530-1:1990. Analysis of nickel alloys by flame atomic absorption spectrometry.General requirements and sample dissolution
BS 7455-2:1991, ISO 7530-2:1990. Analysis of nickel alloys by flame atomic absorption spectrometry.Method for the determination of cobalt
BS 7455-3:1991, ISO 7530-3:1990. Analysis of nickel alloys by flame atomic absorption spectrometry.Method for the determination of chromium
BS 7455-4:1991, ISO 7530-4:1990. Analysis of nickel alloys by flame atomic absorption spectrometry.Method for the determination of copper
BS 7455-5:1991, ISO 7530-5:1990. Analysis of nickel alloys by flame atomic absorption spectrometry.Method for the determination of iron
BS 7455-6:1991, ISO 7530-6:1990. Analysis of nickel alloys by flame atomic absorption spectrometry.Method for the determination of manganese
BS 7455-7:1992, ISO 7530-7:1992. Analysis of nickel alloys by flame atomic absorption spectrometry.Method for determination of aluminium
BS 7455-8:1992, ISO 7530-8:1992. Analysis of nickel alloys by flame atomic absorption spectrometry.Method for determination of silicon
BS 7455-9:1994, ISO 7530-9:1993. Analysis of nickel alloys by flame atomic absorption spectrometry.Method for determination of vanadium
BS 7456:1991. Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems
BS 7457:1991. Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves
BS 7457:1994. Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves
BS 7458-1:1991, EN 21680-1:1991,ISO 1680-1:1986. Test code for the measurement of airborne noise emitted by rotating electrical machineryEngineering method for free-field conditions over a reflecting plane
BS 7458-2:1991, EN 21680-2:1991,ISO 1680-2:1986. Test code for the measurement of airborne noise emitted by rotating electrical machinerySurvey method
BS 7459-1:1991, ISO 7749-1:1986. Rotating sprinklers for irrigation equipmentSpecification for design and operational requirements
BS 7459-1:1995, ISO 7749-1:1995. Rotating sprinklers for irrigation equipmentSpecification for design and operational requirements
BS 7459-2:1991, ISO 7749-2:1990. Rotating sprinklers for irrigation equipment.Methods of test for uniformity of distribution
BS 746:1967. Specification for gas meter unions and adaptors
BS 746:1987. Specification for gas meter unions and adaptors
BS 746:2005+A1:2009. Specification for gas meter unions and adaptors
BS 7460:1991. Code of practice for use of spray extraction machines on carpets and soft floor coverings in hospitals
BS 7461:1991. Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
BS 7462:1991. Specification for electrical safety of domestic gas appliances
BS 7463-1:1991, ISO 9184-1:1990. Fibre furnish analysis of paper, board and pulpsGeneral method
BS 7463-2:1991, ISO 9184-2:1990. Fibre furnish analysis of paper, board and pulpsGuide to staining
BS 7463-3:1991, ISO 9184-3:1990. Fibre furnish analysis of paper, board and pulpsMethod of test by Herzberg stain
BS 7463-4:1991, ISO 9184-4:1990. Fibre furnish analysis of paper, board and pulpsMethod of test by Graff 'C' stain
BS 7463-5:1991, ISO 9184-5:1990. Fibre furnish analysis of paper, board and pulpsMethod of test by Lofton-Merritt stain (Wisbar modification)
BS 7463-6:1995, ISO 9184-6:1994. Fibre furnish analysis of paper, board and pulpsDetermination of fibre coarseness
BS 7463-7:1995, ISO 9184-7:1994. Fibre furnish analysis of paper, board and pulpsDetermination of weight factors
BS 7464:1991, ISO 9089:1989. Specification for anchor winches for mobile offshore units
BS 7465:1991, ISO 6345:1990. Glossary of terms for ships windows and side scuttles
BS 7466:1991, ISO 8385:1990. Specification for dredgers
BS 7467:1991, ISO 7463:1990. Specification for symbols for computer applications in ship building and marine technology
BS 7469-1:1991, ISO 5797-1:1989. Specification for windows and side scuttles for fire-resistant constructions.B class divisions
BS 747:1977. Specification for roofing felts
BS 747:1994. Specification for roofing felts
BS 747:2000. Reinforced bitumen sheets for roofing. Specification
BS 7470:1991, ISO 3904:1990. Specification for clear-view screens for use in ships
BS 7471:1991, ISO 3730:1988. Specification for mooring winches
BS 7472:1991, ISO 9382:1990. Classification for shipborne barges of all series
BS 7473:1991, ISO 8384:1991. Glossary of terms for dredgers
BS 7475:1991. Specification for fusion welding of austenitic stainless steels
BS 7476:1991. Specification for polyethylene film for covering silage
BS 7477:1991, IEC 60416:1988,ISO 3461-1:1988. Guide for general principles for the creation of graphical symbols for use on equipment
BS 7478:1991. Guide to selection and use of thermostatic radiator valves
BS 7479:1991, ISO 9227:1990. Method for salt spray corrosion tests in artificial atmospheres
BS 748:1982. Specification for haemacytometer and particle counting chambers
BS 7480:1992. Specification for security seals
BS 7481:1992. Code of practice for testing venting systems and shields for lead-acid starter batteries
BS 7482-1:1991. Instrumentation for the measurement of vibration exposure of human beings.Specification for general requirements for instrumentation for measuring the vibration applied to human beings
BS 7482-2:1991. Instrumentation for the measurement of vibration exposure of human beings.Specification for instrumentation for measuring vibration transmitted to the hand
BS 7482-3:1991. Instrumentation for the measurement of vibration exposure of human beings.Specification for instrumentation for measuring vibration exposure to the whole body
BS 7483:1991. Specification for lead-acid batteries for the propulsion of light electric vehicles
BS 7484:1991, IEC 61000-2-1:1990. Guide to electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
BS 7485:1991. Method of specifying aqueous dispersions of polytetrafluoroethylene (PTFE) materials
BS 7486-1:1991, IEC 61053-1:1991. Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type Beta format. FM audio recording625 line-50 field systems
BS 7488:1991. Recommendations for handling glass bottles, containing carbonated soft drinks or carbonated water, in filling plants, warehouses, and retailers' premises
BS 7489:1991, ISO 8846:1990. Specification for protection of electrical devices used on small craft to prevent ignition of surrounding flammable gases
BS 749:1969. Specification for underfeed stokers
BS 7490:1991, ISO 10087:1990. Specification for coding system for hull identification of small craft
BS 7491-1:1991. Glass fibre reinforced plastics cisterns for cold water storageSpecification for one-piece cisterns of capacity up to 500 L
BS 7491-2:1992. Glass fibre reinforced plastics cisterns for cold water storageSpecification for one-piece cisterns of nominal capacity from 500 L to 25000 L
BS 7491-3:1994. Glass fibre reinforced plastics cisterns for cold water storageSpecification for sectional tanks
BS 7492:1991, ISO 8848:1990. Specification for remote steering systems for small craft
BS 7493:1991, ISO 9775:1990. Specification for remote steering systems for single outboard motors of 15 kW to 40 kW power for small craft
BS 7494-1:1991. Performance and testing of teleprotection equipment of power systems.Specification for narrow-band command systems
BS 7494-2:1993, IEC 60834-2:1993. Performance and testing of teleprotection equipment of power systemsAnalogue comparison system
BS 7495:1991. Specification for safety requirements for children's table-mounted chairs for domestic use
BS 7496-1:1991. Cross-recessed tapping screwsSpecification for pan head screws
BS 7496-2:1991. Cross-recessed tapping screwsSpecification for countersunk flat head screws
BS 7496-3:1991. Cross-recessed tapping screwsSpecification for raised countersunk head screws
BS 7497:1992. Specification for rigid stretchers
BS 7499:1998. Code of practice for static guarding, mobile patrol and keyholding services
BS 7499:2002. Static site guarding and mobile patrol services. Code of practice
BS 7499:2007. Static site guarding and mobile patrol services. Code of practice
BS 7499:2013. Static site guarding and mobile patrol service. Code of practice
BS 7499-1:1991. Manned security servicesCode of practice for static guarding and mobile patrol services
BS 750:1984. Specification for underground fire hydrants and surface box frames and covers
BS 750:2006. Specification for underground fire hydrants and surface box frames and covers
BS 750:2012. Specification for underground fire hydrants and surface box frames and covers
BS 7500:1995. Specification for marking of recycled paper board
BS 7501:1989, EN 45001:1989. General criteria for the operation of testing laboratories
BS 7502:1989, EN 45002:1989. General criteria for the assessment of testing laboratories
BS 7503:1989, EN 45003:1989. General criteria for laboratory accreditation bodies
BS 7504:1995, ISO 6164:1994. Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
BS 7505:1995. Specification for the elastic properties of flat, non- adhesive, extensible fabric bandages
BS 7506-1:1995. Methods for measurement in electrostaticsGuide to basic electrostatics
BS 7506-2:1996. Methods for measurement in electrostaticsTest methods
BS 7507:1995, ISO 10334:1994. Specification for malleable wires for use as sutures and other surgical applications
BS 7508:1995, ISO 11342:1994. Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors
BS 7509:1995, IEC 61307:1994. Industrial microwave heating installations. Test methods for determination of power output
BS 751:1959. Specification for steel bearing plates for flat bottom railway rails
BS 751:1992. Specification for steel baseplates for flat bottom railway rails
BS 7510:1995, IEC 61308:1994. High-frequency dielectric heating installations. Test methods for the determination of power output
BS 7511:1989, EN 45011:1989. General criteria for certification bodies operating product certification
BS 7512:1989, EN 45012:1989. General criteria for certification bodies operating quality system certification
BS 7513:1989, EN 45013:1989. General criteria for certification bodies operating certification of personnel
BS 7514:1989, EN 45014:1989. General criteria for suppliers' declaration of conformity
BS 7515:1995, IEC 61263:1994. Radiation protection instrumentation. Portable potential alpha energy meter for rapid measurements in mines
BS 7516:1995, IEC 61304:1994. Nuclear instrumentation. Liquid-scintillation counting systems. Performance verification
BS 7517:1995, IEC 61227:1993. Nuclear power plants. Control rooms. Operator controls
BS 7518:1995, IEC 61017-2:1994. Radiation protection instrumentation. Portable, transportable or installed equipment to measure x or gamma radiation for environmental monitoring. Integrating assemblies
BS 7519:1995, ISO 3719:1994. Mechanical vibration. Symbols for balancing and associated instrumentation
BS 752:1974. Test code for acceptance of steam turbines
BS 7520:1995, IEC 61318:1994. Guide to quality assurance plans for tools for live working
BS 7521:1992. Specification for electronic messaging enabling the application of BS ISO/IEC 10021 in the United Kingdom
BS 7522-1:1992. Low vision aidsSpecification for hand and stand magnifiers, including magnifiers with an integral source of illumination
BS 7522-2:1993. Low vision aidsSpecification for spectacle magnifiers and similar devices
BS 7523:1991. Specification for preformed cellular polyethylene (PE) materials for the thermal insulation of pipework
BS 7524:1991. Code of practice for documentation for social alarm systems
BS 7525:1992. Specification for flammability of air cleaner elements for internal combustion engines
BS 7527-1:1991, IEC 60721-1:1990. Classification of environmental conditions. Environmental conditions appearing in natureEnvironmental parameters and their severities
BS 7527-2.1:1991, IEC 60721-2-1:1982. Classification of environmental conditions. Environmental conditions appearing in natureTemperature and humidity
BS 7527-2.2:1991, IEC 60721-2-2:1988. Classification of environmental conditions. Environmental conditions appearing in nature.Precipitation and wind
BS 7527-2.3:1991, IEC 60721-2-3:1987. Classification of environmental conditions. Environmental conditions appearing in nature.Air pressure
BS 7527-2.4:1991, IEC 60721-2-4:1987. Classification of environmental conditions. Environmental conditions appearing in nature.Solar radiation and temperature
BS 7527-2.5:1991, IEC 60721-2-5:1991. Classification of environmental conditions. Environmental conditions appearing in natureDust, sand, salt mist
BS 7527-2.6:1991, IEC 60721-2-6:1990. Classification of environmental conditions. Environmental conditions appearing in nature.Earthquake vibration and shock
BS 7527-2.7:1991, IEC 60721-2-7:1987. Classification of environmental conditions. Environmental conditions appearing in nature.Fauna and flora
BS 7529:1991. Specification for desiccant activated clay
BS 753:1959. Density-composition tables for aqueous solutions of sulphuric acid
BS 753:1987. Schedule for density-composition tables for aqueous solutions of sulphuric acid
BS 7530-1:1992. Methods for froth flotation testing of hard coalLaboratory procedure
BS 7530-2:1995. Methods for froth flotation testing of hard coalEvaluation of flotation characteristics
BS 7531:1992. Specification for compressed non-asbestos fibre jointing
BS 7531:2006. Rubber bonded fibre jointing for industrial and aerospace purposes. Specification
BS 7532:1991. Method of test for accuracy and precision of mechanical handpipettes of capacity less than 50 μL down to and including 10 μL
BS 7533:1992. Guide for structural design of pavements constructed with clay or concrete block pavers
BS 7533-1:2001. Pavements constructed with clay, natural stone or concrete paversGuide for the structural design of heavy duty pavements constructed of clay pavers or precast concrete paving blocks
BS 7533-10:2004. Pavements constructed with clay, natural stone or concrete paversGuide for the structural design of trafficked pavements constructed of natural stone setts
BS 7533-10:2010. Pavements constructed with clay, natural stone or concrete paversGuide for the structural design of trafficked pavements constructed of natural stone setts and bound construction with concrete paving blocks
BS 7533-11:2003. Pavements constructed with clay, natural stone or concrete paversCode of practice for the opening, maintenance and reinstatement of pavements of concrete, clay and natural stone
BS 7533-12:2006. Pavements constructed with clay, natural stone or concrete paversGuide to the structural design of trafficked pavements constructed on a bound base using concrete paving flags and natural stone slabs
BS 7533-13:2009. Pavements constructed with clay, natural stone or concrete paversGuide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers
BS 7533-2:2001. Pavements constructed with clay, natural stone or concrete paversGuide for the structural design of lightly trafficked pavements constructed of clay pavers or precast concrete paving blocks
BS 7533-3:1997. Pavements constructed with clay, natural stone or concrete paversCode of practice for laying precast concrete paving blocks and clay pavers for flexible pavements
BS 7533-3:2005+A1:2009. Pavements constructed with clay, natural stone or concrete paversCode of practice for laying precast concrete paving blocks and clay pavers for flexible pavements
BS 7533-4:1998. Pavements constructed with clay, natural stone or concrete paversCode of practice for the construction of pavements of precast concrete flags or natural stone slabs
BS 7533-4:2006. Pavements constructed with clay, natural stone or concrete paversCode of practice for the construction of pavements of precast concrete flags or natural stone slabs
BS 7533-6:1999. Pavements constructed with clay, natural stone or concrete paversCode of practice for laying natural stone, precast concrete and clay kerb units
BS 7533-7:2002. Pavements constructed with clay, natural stone or concrete paversCode of practice for the construction of pavements of natural stone setts and cobbles
BS 7533-7:2010. Pavements constructed with clay, natural stone or concrete paversCode of practice for the construction of pavements of natural stone paving units and cobbles, and rigid construction with concrete block paving
BS 7533-8:2003. Pavements constructed with clay, natural stone or concrete paversGuide for the structural design of lightly trafficked pavements of precast concrete flags and natural stone flags
BS 7533-9:2010. Pavements constructed with clay, natural stone or concrete paversCode of practice for the construction of rigid pavements of clay pavers
BS 7534:1991, IEC 60406:1975. Specification for radiographic cassettes (Implementation of CENELEC HD 356 S1)
BS 7535:1992. Guide to the use of electrical apparatus complying with BS 5501 or BS 6941 in the presence of combustible dusts
BS 7537-1:1991, IEC 61055-1:1991. Measurement techniques and operational adjustments of broadcast VTRsGuide to operational adjustments on analogue composite broadcast VTRs
BS 7537-2:1991, IEC 61055-2:1991. Measurement techniques and operational adjustments of broadcast VTRsGuide to special mechanical measurements and alignments
BS 7539:1992. Methods for test for determination of properties of cushioning materials for package design purposes
BS 7540:1992. Guide to use of cables with a rated voltage not exceeding 450/750 V
BS 7540:1994. Guide to use of cables with a rated voltage not exceeding 450/750 V
BS 7540-1:2005. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 VGeneral guidance
BS 7540-2:2005. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 VHarmonized cable types from HD 21 and HD 22
BS 7540-3:2005. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 VNational standard cables not included in HD 21 and HD 22
BS 7541:1992. Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage
BS 7542:1992. Method of test for curing compounds for concrete
BS 7543:1992. Guide to durability of buildings and building elements, products and components
BS 7543:2003. Guide to durability of buildings and building elements, products and components
BS 7544:1991, ISO 10112:1991. Method for graphical presentation of the complex modulus of damping materials
BS 7545:1991, ISO 8407:1991. Method for removal of corrosion products from corrosion test specimens of metals and alloys
BS 7546-1:1992. Hydrogen peroxide for industrial useMethod for determination of hydrogen peroxide content
BS 7546-2:1992. Hydrogen peroxide for industrial useMethod for determination of stability at 100°C
BS 7546-3:1992. Hydrogen peroxide for industrial useMethod for determination of apparent acidity
BS 7550-1:1992, ISO 9091-1:1991. Calibration of spherical tanks for refrigerated light-hydrocarbon fluids in shipsMethod of stereo-photogrammetry
BS 7550-2:1993, ISO 9091-2:1992. Calibration of spherical tanks for refrigerated light-hydrocarbon fluids in shipsTriangulation method
BS 7551:1992. Specification for safety requirements for carry cots and similar handled products and stands
BS 7552-1:1992, ISO 9866-1:1991. Effect of dry heat on fabrics under low pressureMethod for dry heat treatment of fabrics
BS 7552-2:1991, ISO 9866-2:1991. Effect of dry heat on fabrics under low pressureMethod for determination of dimensional change in fabrics exposed to dry heat.
BS 7553:1992. Specification for loft ladders
BS 7554:1992. Specification for beaded desiccant silica gel
BS 7555:1992. Guide to miniaturization of medical diagnostic images on film
BS 7556:1992. Thermostatic radiator valves. Specification for dimensions and details on connection
BS 7557:1992. Specification for limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs
BS 7558:1992. Specification for gun cabinets
BS 756:1952. Specification for Dean and Stark apparatus
BS 7560:1992, ISO 8210:1989. Method of assessing, testing and reporting characteristics and performance of combine harvesters
BS 7562-1:1992. Planning, design and installation of irrigation schemesGlossary of terms
BS 7562-2:1992. Planning, design and installation of irrigation schemesGuide for acquisition of site data
BS 7562-3:1995. Planning, design and installation of irrigation schemesGuide to irrigation water requirements
BS 7562-4:1992. Planning, design and installation of irrigation schemesGuide to water resources
BS 7562-5:1993. Planning, design and installation of irrigation schemesGuide for irrigation equipment
BS 7562-6:1992. Planning, design and installation of irrigation schemesGuide for feasibility and implementation procedures
BS 7563:1992. Method for determination of compression values and stiffness of non-prescriptive graduated support hosiery
BS 7563:1999. Specification for non-prescriptive graduated support hosiery
BS 7564-1:1992, ISO 8406:1991. Tools for mouldingBases-locating elements
BS 7564-10:1993, ISO 10073:1991. Tools for moulding.Specification for dimensions of support pillars
BS 7564-2:1992, ISO 9449:1990. Tools for moulding.Centring sleeves
BS 7564-3:1992, ISO 8017-1985. Tools for mouldingMould guide pillars, straight and shouldered, and locating guide pillars, shouldered
BS 7564-4:1992, ISO 8018-1985. Tools for mouldingMould guide bushes, headed, and locating guide bushes, headed
BS 7564-5:1992, ISO 6751:1986. Tools for mouldingEjector pins with cylindrical head. Dimensions
BS 7564-6:1992, ISO 8693:1987. Tools for mouldingFlat ejector pins
BS 7564-7:1992, ISO 8694:1987. Tools for mouldingShouldered ejector pins
BS 7564-8:1992, ISO 8404:1986. Tools for moulding.Angle pins. Basic dimensions
BS 7564-9:1992, ISO 8405:1986. Tools for mouldingEjector sleeves with cylindrical head. Basic series for general purposes
BS 7565:1992, IEC 60310:1991. Specification for traction transformers and inductors
BS 7566-1:1992. Installation of factory-made chimneys to BS 4543 for domestic appliancesMethod of specifying installation design information
BS 7566-2:1992. Installation of factory-made chimneys to BS 4543 for domestic appliancesSpecification for installation design
BS 7566-3:1992. Installation of factory-made chimneys to BS 4543 for domestic appliancesSpecification for site installation
BS 7566-4:1992. Installation of factory-made chimneys to BS 4543 for domestic appliancesRecommendations for installation design and installation
BS 7567-1:1992. Electronic transfer of geographic information (NTF).Specification for NTF structures
BS 7567-2:1992. Electronic transfer of geographic information (NTF).Specification for implementing plain NTF
BS 7567-3:1992. Electronic transfer of geographic information (NTF).Specification for implementing NTF using BS 6690
BS 7568-1:1992, ISO 8695:1987. Press toolsPunches. Nomenclature and terminology
BS 7568-10:1992, ISO 9181:1990. Press tools.Round punches with 60° conical head and reduced shank
BS 7568-11:1992, ISO 9183-1:1990. Press tools.Wear plates for press dies. Type A
BS 7568-12:1992, ISO 10069-1:1991. Press tools.Elastomer pressure springs. General specification
BS 7568-13:1992, ISO 10069-2:1991. Press tools.Elastomer pressure springs. Specification of accessories
BS 7568-14:1992, ISO 10242-1:1991. Press toolsPunch holder shanks. Types A and B
BS 7568-15:1992, ISO 10242-2:1991. Press tools.Punch holder shanks. Type C
BS 7568-16:1992, ISO 10242-3:1991. Press tools.Punch holder shanks. Type D
BS 7568-17:1992, ISO 9448-1:1991. Press toolsGuide bushes. Forms
BS 7568-18:1992, ISO 9448-2:1991. Press toolsGuide bushes. Gliding bushes, plain, type 1
BS 7568-19:1992, ISO 9448-3:1991. Press toolsGuide bushes. Form B, ball cage bushes, plain, type 1
BS 7568-20:1992, ISO 9448-4:1991. Press toolsGuide bushes. Form C, gliding bushes, headed, type 1
BS 7568-21:1992, ISO 9448-5:1991. Press toolsGuide bushes. Form D, ball cage bushes, headed, type 1
BS 7568-22:1992, ISO 9448-6:1991. Press toolsGuide bushes. Form E, gliding bushes, flanged, type 1
BS 7568-23:1992, ISO 9448-7:1991. Press toolsGuide bushes. Form F, ball cage bushes, flanged, type 1
BS 7568-24:1992, ISO 9448-8:1991. Press toolsGuide bushes. Form G, gliding bushes, stepped, type 1
BS 7568-25:1993, ISO 9182-1:1992. Press toolsGuide pillars. Types
BS 7568-26:1993, ISO 9182-2:1992. Press toolsGuide pillars. Type A, straight pillars
BS 7568-27:1993, ISO 9182-3:1992. Press toolsGuide pillars. Type B, end-locking pillars
BS 7568-28:1993, ISO 9182-4:1992. Press toolsGuide pillars. Type C, pillars with taper lead and bush
BS 7568-29:1993, ISO 9182-5:1992. Press toolsGuide pillars. Type D, end-locking pillars with flange
BS 7568-30:1993, ISO 9448-9:1993. Press tools.Specification for guide bushes: form B, ball cage bushes, plain, type 2
BS 7568-31:1993, ISO 9448-10:1992. Press tools.Specification for guide bushes: form E, gliding bushes, flanged, type 2
BS 7568-32:1993, ISO 9448-11:1992. Press tools.Specification for guide bushes: form F, ball cage bushes, flanged, type 2
BS 7568-33:1993, ISO 9183-2:1993. Press tools.Wear plates for press dies, type B
BS 7568-4:1992, ISO 10243:1991. Press toolsCompression springs with rectangular section. Housing dimensions and colour coding
BS 7568-5:1992, ISO 8020:1992. Press toolsPunches with cylindrical head and reduced shank
BS 7568-6:1992, ISO 8021:1986. Press toolsRound punches with cylindrical head and straight shank
BS 7568-7:1992, ISO 6752:1984. Press tools.Round punches with 60° conical head and straight shank
BS 7568-8:1992, ISO 8977:1987. Press toolsRound matrixes
BS 7568-9:1992, ISO 8978:1987. Press toolsGuides for round punches
BS 7569:1992. Recommendations for the packaging of dangerous goods for transport
BS 7569:1994. Recommendations for the packaging of dangerous goods for transport
BS 757:1975. Methods for sampling and testing gelatine (physical and chemical methods)
BS 7570:1992. Code of practice for validation of arc welding equipment
BS 7570:2000. Code of practice for validation of arc welding equipment
BS 7571:1992, IEC 60850:1988. Specification for supply voltages of traction systems
BS 7572:1992. Code of practice for thermally insulated underground piping systems
BS 7575:1992, ISO 8310:1991. Specification for resistance thermometers and thermocouples for the measurement of temperature in tanks containing refrigerated light hydrocarbon fluids
BS 7576:1992, ISO 8943:1991. Method for continuous sampling of liquefied natural gas (LNG) in transfer pipelines
BS 7577:1992, ISO 6578:1991. Specification for calculation procedures for static measurement of refrigerated light hydrocarbon fluids
BS 7578:1992, IEC 60358:1990. Coupling capacitors and capacitor dividers
BS 7579:1992, ISO 2194:1991. Specification for designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet for industrial screens
BS 7580-1:1997. Specification for the verification of sound level metersComprehensive procedure
BS 7580-2:1997. Specification for the verification of sound level metersShortened procedure for type 2 sound level meters
BS 7581:1992. Guide to presentation of tables and graphs
BS 7582:1992. Code of practice for reconditioning of used safes
BS 7582:2005. Code of practice for reconditioning of used safes
BS 7583:1992. Specification for Portland limestone cement
BS 7583:1996. Specification for Portland limestone cement
BS 7585-1:1992, ISO 4386-1:1992. Metallic multilayer plain bearings.Method for non-destructive ultrasonic testing of bond
BS 7585-2:1992, ISO 4386-2:1982. Metallic multilayer plain bearings.Method for destructive testing of bond for bearing metal layer thickness ≥ 2 mm
BS 7585-3:1992, ISO 4386-3:1992. Metallic multilayer plain bearings.Method for non-destructive die penetrant testing
BS 7586:1992. Specification for combination wrenches
BS 7587:1992, IEC 61022:1989. Specification for interconnection of radio and TV receivers to feeder system outlets
BS 7588:1993. Guide to hierarchical interconnection technology
BS 7590:1992. Method for statistically estimating the volume fraction of phases and constituents by systematic manual point counting with a grid
BS 7590A:1992. Worksheet for the determination of volume fraction by systematic manual point count
BS 759-1:1984. Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilersSpecification for valves, mountings and fittings
BS 7591-1:1992. Porosity and pore size distribution of materialsMethod of evaluation by mercury porosimetry
BS 7591-2:1992. Porosity and pore size distribution of materialsMethod of evaluation by gas adsorption
BS 7591-4:1993. Porosity and pore size distribution of materialsMethod of evaluation by liquid expulsion
BS 759-2:1975. Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers.Specification for safety valves
BS 7592:1992. Methods for sampling for Legionella organisms in water and related materials
BS 7592:2008. Sampling for Legionella bacteria in water systems. Code of practice
BS 7593:1992. Code of practice for treatment of water in domestic hot water central heating systems
BS 7593:2006. Code of practice for treatment of water in domestic hot water central heating systems
BS 7594:1993. Code of practice for audio-frequency induction-loop systems (AFILS)
BS 7594:2011. Code of practice for audio-frequency induction-loop systems (AFILS)
BS 7595:1992, IEC 60883:1987. Measuring method for chrominance signal-to-random noise ratio for video tape recorders
BS 7596:1992, ISO 4660:1991. Method for determination of colour of raw natural rubber (colour index test)
BS 7597:1992, ISO 10485:1991. Method of test for cone proof loading on nuts
BS 7599:1992, ISO 7053:1992. Specification for hexagon washer head tapping screws
BS 76:1974. Specification for tars for road purposes
BS 7600:1992, ISO 10509:1992. Specification for hexagon flange head tapping screws
BS 7601:1992, ISO 9116:1992. Guide to specifying green coffee
BS 7602:1992, IEC 61085:1992. Guide to general considerations for telecommunication services for electrical power systems
BS 7603:1992, ISO 4790:1992. Method for determination of stresses in glass-to-glass sealings
BS 7604-1:1992, ISO 10345-1:1992. Method for determination of stress-optical coefficient of glassTensile test
BS 7604-2:1992, ISO 10345-2:1992. Method for determination of stress-optical coefficient of glassBending test
BS 7605-1:1992, ISO 9260:1991. Agricultural irrigation equipment.Specification for emitters
BS 7605-2:1992, ISO 9261:1991. Agricultural irrigation equipment.Specification for emitting pipe systems
BS 7606:1992. Specification for social alarm system apparatus for connection to public switched telephone networks
BS 7607:1992, ISO 10755:1992. Graphic technology. Prepress digital data exchange. Colour picture data on magnetic tape
BS 7608:1993. Code of practice for fatigue design and assessment of steel structures
BS 7609:1992+A2:2009. Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors
BS 7611:1992. Specification for potato storage boxes for mechanical handling
BS 7612:1993. Specification for non-circular steel wire for mechanical springs
BS 7613:1994. Specification for hot rolled quenched and tempered weldable structural steel plates
BS 7614:1992, ISO 9961:1992. Specification for natural tracing paper
BS 7615:1992, ISO 10190:1992. Specification for motor cycle chains
BS 7616:1993. Specification for bushings for liquid filled transformers above 1 kV and up to 36 kV
BS 7618-1:1992, ISO 9703-1:1992. Alarm signals for anaesthesia and respiratory careSpecification for visual alarm signals
BS 7619:1993. Specification for extruded cellular unplasticized PVC (PVC-UE) profiles
BS 7619:2010. Extruded cellular unplasticized white PVC (PVC-UE) profiles. Specification
BS 7620:1993, ISO 9982:1991. Specification for industrial belt drives. Dimensions of pulleys and V-ribbed belts of PH, PJ, PK, PL and PM profiles
BS 7621:1993, ISO 9847:1992. Method for calibrating field pyranometers by comparison to a reference pyranometer
BS 7622-1:1993. Measurement of smoke density of electric cables burning under defined conditionsTest apparatus
BS 7622-2:1993. Measurement of smoke density of electric cables burning under defined conditionsTest procedure and requirements
BS 7623:1993, IEC 61153:1992. Electrical and pneumatic analogue chart recorders for use in industrial-process control systems. Guidance for inspection and routine testing
BS 7624:1993. Specification for installation of domestic direct gas-fired tumble dryers of up to 3kW heat input (2nd and 3rd family gases)
BS 7624:2004. Installation and maintenance of domestic direct gas-fired tumble dryers of up to 6 kW heat input (2nd and 3rd family gases). Specification
BS 7625:1993. Specification for voltage transformers
BS 7626:1993. Specification for current transformers
BS 7628:1993. Specification for combined transformers
BS 7629:1993. Specification for thermosetting insulated cables with limited circuit integrity when affected by fire
BS 7629-1:1997. Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fireMulticore cables
BS 7629-1:1997. Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fireMulticore cables
BS 7629-1:2008. Electric cables. Specification for 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fireMulticore and multipair cables
BS 7629-2:1997. Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multipair cables
BS 7630:1993. Generic specification for symmetric pair/quad and multicore cables for digital communication
BS 7631:1993, IEC 60593:1977. Internal fuses and internal overpressure disconnectors for shunt capacitors
BS 7632:1993, IEC 60594:1977. Internal fuses and internal overpressure disconnectors for capacitors for inductive heat generating plants
BS 7633:1993, IEC 60595:1977. Internal fuses for series capacitors
BS 7634:1993, ISO 10083:1992. Specification for oxygen concentrators for use with medical gas pipeline systems
BS 7637:1993, ISO 10285:1992. Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series)
BS 7638:1993, IEC 60781:1989. Application guide for calculation of short-circuit currents in low-voltage radial systems
BS 7639:1993. Short-circuit current calculation in three-phase a.c. systems
BS 764:1954. Specification. Automatic change-over contactors for emergency lighting systems
BS 764:1990. Specification for automatic change-over contactors for emergency lighting systems
BS 7641:1993, ISO 9836:1992. Performance standards in building. Definition and calculation of area and space indicators
BS 7642:1993, ISO 7162:1992. Performance standards in building. Contents and format of standards for evaluation of performance
BS 7643-1:1993, ISO 6242-1:1993. Building construction. Expression of users' requirementsThermal requirements
BS 7643-2:1993, ISO 6242-2:1992. Building construction. Expression of users' requirementsAir purity requirements
BS 7643-3:1993, ISO 6242-3:1992. Building construction. Expression of users' requirementsAcoustical requirements
BS 7644-1:1993. Direct tension indicators.Specification for compressible washers
BS 7644-2:1993. Direct tension indicatorsSpecification for nut face and bolt face washers
BS 7645:1993, IEC 60757:1983. Code for designation of colours
BS 7646:1993. Specification for general purpose self-service trolleys
BS 7647:1993. Specification for radio teleswitches for tariff and load control
BS 7648:1993. Specification for double braided ropes made from man-made fibre
BS 7649:1993. Guide to the design and preparation of documentation for users of application software
BS 7650:1993. Specification for pressure regulators used in welding, cutting and related processes with compressed gases up to 300 bar
BS 7652-1:1993, ISO 11040-1:1992. Prefilled syringes.Specification for glass cylinders for dental local anaesthetic cartridges
BS 7652-2:1995, ISO 11040-2:1994. Prefilled syringesSpecification for plungers and discs for dental local anaesthetic cartridges
BS 7653-1:1993. Piston and/or plunger operated volumetric apparatusGlossary of terms
BS 7653-2:1993. Piston and/or plunger operated volumetric apparatusMethods of operation
BS 7653-3:1993. Piston and/or plunger operated volumetric apparatusMethods of test
BS 7653-4:1993. Piston and/or plunger operated volumetric apparatusSpecification for conditions of test, safety and supply
BS 7654:1993. Specification for single phase street lighting fuses (cut-outs) for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture
BS 7654:1997. Specification for single phase street lighting fuses (cut-outs) for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture
BS 7654:2010. Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture
BS 7655-0:1993. Specification for insulating and sheathing materials for cablesGeneral introduction
BS 7655-0:1997. Specification for insulating and sheathing materials for cablesGeneral introduction
BS 7655-0:2006. Specification for insulating and sheathing materials for cablesGeneral introduction
BS 7655-1.1:1997. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsHarmonized types
BS 7655-1.1:2000. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsHarmonized types
BS 7655-1.2:1997. Specification for insulating and sheathing materials for cablesCross-linked elastomeric insulating compounds
BS 7655-1.3:1993. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsXLPE
BS 7655-1.3:2000. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsXLPE
BS 7655-1.4:1993. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsOil resisting types
BS 7655-1.4:2000. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsOil resisting types
BS 7655-1.5:1993. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsFlame retardant composites
BS 7655-1.5:2000. Specification for insulating and sheathing materials for cablesCross-linked elastomeric insulating compounds
BS 7655-1.6:1993. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsCoil end lead types
BS 7655-1.6:2000. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsCoil end lead types
BS 7655-10.1:1996. Specification for insulating and sheathing materials for cables. Polyethylene sheathing compoundsThermoplastic medium density polyethylene (MDPE) sheathing compound
BS 7655-10.1:2000. Specification for insulating and sheathing materials for cablesPolyethylene sheathing compounds
BS 7655-1-1.1:1993. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsHarmonized types
BS 7655-11.1:1997. Specification for insulating and sheathing materials for cables. Miscellaneous insulating compoundsHarmonized cross-linked PVC types
BS 7655-1-1.2:1993. Specification for insulating and sheathing materials for cables. Elastomeric insulating compoundsGeneral 90°C application
BS 7655-12.1:1997. Specification for insulating and sheathing materials for cables. Miscellaneous sheathing compoundsHarmonized thermoplastic polyurethane sheathing compound
BS 7655-12.1:2000. Specification for insulating and sheathing materials for cables. Miscellaneous sheathing compoundsHarmonized thermoplastic polyurethane sheathing compound
BS 7655-12.2:1997. Specification for insulating and sheathing materials for cables. Miscellaneous sheathing compoundsHarmonized cross-linked PVC types
BS 7655-2.1:1997. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsHarmonized types
BS 7655-2.1:2000. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsHarmonized types
BS 7655-2.2:1993. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsHeat resisting types
BS 7655-2.3:1993. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsGeneral application
BS 7655-2.3:2000. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsGeneral application
BS 7655-2.4:1993. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsWelding cable covering
BS 7655-2.4:2000. Specification for insulating and sheathing materials for cablesCross-linked elastomeric sheathing compounds
BS 7655-2.6:1993. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsSheathing compounds for ships wiring and offshore applications
BS 7655-2.6:2000. Specification for insulating and sheathing materials for cablesCross-linked elastomeric sheathing compounds
BS 7655-2-2.1:1993. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsHarmonized types
BS 7655-2-2.5:1993. Specification for insulating and sheathing materials for cables. Elastomeric sheathing compoundsSheathing compounds having low smoke and acid gas emission for general applications
BS 7655-3.1:1997. Specification for insulating and sheathing materials for cables. PVC insulating compoundsHarmonized types
BS 7655-3.2:1993. Specification for insulating and sheathing materials for cables. PVC insulating compoundsHard grade types
BS 7655-3.2:2000. Specification for insulating and sheathing materials for cables. PVC insulating compoundsHard grade types
BS 7655-3-3.1:1993. Specification for insulating and sheathing materials for cables. PVC insulating compoundsHarmonized types
BS 7655-4.1:1997. Specification for insulating and sheathing materials for cables. PVC sheathing compoundsHarmonized types
BS 7655-4.2:1993. Specification for insulating and sheathing materials for cables. PVC sheathing compoundsGeneral application
BS 7655-4.2:2000. Specification for insulating and sheathing materials for cables. PVC sheathing compoundsGeneral application
BS 7655-4.3:1993. Specification for insulating and sheathing materials for cables. PVC sheathing compoundsSpecial applications RF cables
BS 7655-4.3:2000. Specification for insulating and sheathing materials for cables. PVC sheathing compoundsSpecial applications. RF cables
BS 7655-4-4.1:1993. Specification for insulating and sheathing materials for cables. PVC sheathing compoundsHarmonized types
BS 7655-5.1:1997. Specification for insulating and sheathing materials for cables. Cross-linked insulating compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fireHarmonized cross-linked types
BS 7655-5-5.1:1994. Specification for insulating and sheathing materials for cables. Cross-linked insulating compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fireHarmonized cross-linked types
BS 7655-6.1:1997. Specification for insulating and sheathing materials for cablesThermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire
BS 7655-6-6.1:1994. Specification for insulating and sheathing materials for cables. Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fireGeneral application thermoplastic types
BS 7655-8.1:1997. Specification for insulating and sheathing materials for cables. PVC sheathing compoundsHarmonized cross-linked types
BS 7655-8.1:2000. Specification for insulating and sheathing materials for cables. Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fireHarmonized types
BS 7655-8.2:1997. Specification for insulating and sheathing materials for cables. Cross-linked sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fireOrdinary duty oil-resisting types
BS 7656:1993. Specification for low-voltage pole-mounting fuses (cut-outs). 315 A rating
BS 7657:1993. Specification for fuses (cut-outs), ancillary terminal blocks and interconnecting units up to 100 A rating, for power supplies to buildings
BS 7657:2010. Specification for cut-out assemblies up to 100 A rating, for power supply to buildings
BS 7658-1:1993, ISO 10119:1992. Carbon fibreMethod for determination of density
BS 7658-2:1993, ISO 10120:1991. Carbon fibre.Method for determination of linear density
BS 7659:1993. Specification for dog muzzles
BS 7659:1994. Specification for dog muzzles
BS 7660:1993. Specification for safety pins for general use
BS 7661:1993. Specification for inflatable armbands worn as flotation aids
BS 7662:1993, ISO 513:1991. Application of hard cutting materials for machining by chip removal. Designation of the main groups of chip removal and groups of application
BS 7663:1993. Methods of test for determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form
BS 7664:1993. Specification for undercoat and finishing paints
BS 7664:2000. Specification for undercoat and finishing paints
BS 7666-0:2006. Spatial datasets for geographical referencingGeneral model for gazetteers and spatial referencing
BS 7666-1:1993. Spatial data-sets for geographical referencingSpecification for a Street Gazetteer
BS 7666-1:2000. Spatial data-sets for geographical referencingSpecification for a street gazetteer
BS 7666-1:2006. Spatial datasets for geographical referencingSpecification for a street gazetteer
BS 7666-2:1994. Spatial data-sets for geographical referencingSpecification for a land and property Gazetteer
BS 7666-2:2000. Spatial data-sets for geographical referencingSpecification for a land and property gazetteer
BS 7666-2:2006. Spatial datasets for geographical referencingSpecification for a land and property gazetteer
BS 7666-3:1994. Spatial data-sets for geographical referencingSpecification for addresses
BS 7666-3:2000. Spatial data-sets for geographical referencingSpecification for addresses
BS 7666-4:1996. Spatial data-sets for geographical referencingSpecification of a data-set for recording public rights of way
BS 7666-4:2002. Spatial data-sets for geographical referencingSpecification for recording public rights of way
BS 7666-5:2006. Spatial datasets for geographical referencingSpecification for a delivery point gazetteer
BS 7667-1:1993, ISO 8586-1:1993. Assessors for sensory analysisGuide to the selection, training and monitoring of selected assessors
BS 7667-2:1994, ISO 8586-2:1994. Assessors for sensory analysis.Guide to the selection, training and monitoring of experts
BS 7668:1994. Specification for weldable structural steels. Hot finished structural hollow sections in weather resistant steels
BS 7668:2004. Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification
BS 7669-3:1994. Vehicle restraint systemsGuide to the installation, inspection and repair of safety fences
BS 767:1983. Specification for centrifuges of the basket and bowl type for use in industrial and commercial applications
BS 7670-1:1993. Steel nuts and bolts for resistance projection welding.Specification for dimensions and properties
BS 7670-2:1997. Steel nuts and bolts for resistance projection weldingSpecification for welding of weld nuts and weld bolts
BS 7671 Amendment 2:August 2013. Requirements for electrical installations. IET Wiring Regulations. Seventeenth edition
BS 7671:1992. Requirements for electrical installations. IEE Wiring Regulations. Sixteenth edition
BS 7671:2001. Requirements for electrical installations. IEE Wiring Regulations. Sixteenth edition
BS 7671:2008+A1:2011. Requirements for electrical installations. IET Wiring Regulations. Seventeenth edition
BS 7672:1993. Specification for compression, stiffness and labelling of anti-embolism hosiery
BS 7673:1993. Specification for domestic gas cooker oven control valves with or without manual override
BS 7674:1993, IEC 61225:1993. Nuclear power plants. Instrumentation and control systems important for safety. Requirements for electrical supplies
BS 7675:1993, ISO 6524:1992. Plain bearings. Thin-walled half bearings. Checking of peripheral length
BS 7676-1:1993, ISO 8579-1:1993. Acceptance code for gearsDetermination of airborne sound power levels emitted by gear units
BS 7676-2:1993, ISO 8579-2:1993. Acceptance code for gearsDetermination of mechanical vibrations of gear units during acceptance testing
BS 7677:1993, ISO 9691:1992. Recommendations for classification of imperfections in pipe joint rings
BS 7678:1993, ISO 6978:1992. Method for determination of mercury in natural gas
BS 7679:1993, ISO 12301:1992. Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
BS 768:1958. Specification for slotted grub screws
BS 7680:1993, ISO 10185:1993. Glossary of terms for tobacco and tobacco products
BS 7682:1993. Specification for stationary transformers in traction systems
BS 7683:1993, ISO 10470:1993. Guide to defects of green coffee
BS 7684:1993, IEC 60398:1980. General test conditions for industrial electro-heating equipment
BS 7685:1993, IEC 60676:1980. Test methods for direct arc furnaces
BS 7686:1993, IEC 60683:1980. Test methods for submerged-arc furnaces
BS 7688:1993, IEC 60779:1983. Test methods for electro-slag remelting furnaces
BS 7689:1993, IEC 60703:1981. Test methods for electroheating installations with electron guns
BS 769:1961. Methods for the chemical analysis of butter
BS 7690:1993, IEC 60396:1991. Test methods for induction channel furnaces
BS 7691:1994. Methods for testing resistance to environmental conditions of electronic equipment used in agriculture and horticulture
BS 7693:1993, IEC 61147:1993. Guide to uses of infra-red transmission and the prevention or control of interference between systems
BS 7694:1993, ISO 2395:1990. Glossary of terms for test sieves and test sieving
BS 7697:1993. Nominal voltages for low voltage public electricity supply systems
BS 7698-1:1993, ISO 8528-1:1993. Reciprocating internal combustion engine driven alternating current generating sets.Specification for application, ratings and performance
BS 7698-10:1999, ISO 8528-10:1998. Reciprocating internal combustion engine driven alternating current generating setsMeasurement of airborne noise by the enveloping surface method
BS 7698-12:1998, ISO 8528-12:1997. Reciprocating internal combustion engine driven alternating current generating setsEmergency power supply to safety devices
BS 7698-2:1993, ISO 8528-2:1993. Reciprocating internal combustion engine driven alternating current generating sets.Specification for engines
BS 7698-3:1993, ISO 8528-3:1993. Reciprocating internal combustion engine driven alternating current generating sets.Specification for alternating current generators for generating sets
BS 7698-4:1993, ISO 8528-4:1993. Reciprocating internal combustion engine driven alternating current generating sets.Specification for controlgear and switchgear
BS 7698-5:1993, ISO 8528-5:1993. Reciprocating internal combustion engine driven alternating current generating sets.Specification for generating sets
BS 7698-6:1993, ISO 8528-6:1993. Reciprocating internal combustion engine driven alternating current generating sets.Test methods
BS 7698-7:1996, ISO 8528-7:1994. Reciprocating internal combustion engine driven alternating current generating setsTechnical declarations for specification and design
BS 7698-8:1996, ISO 8528-8:1995. Reciprocating internal combustion engine driven alternating current generating setsRequirements and tests for low-power generating sets
BS 7698-9:1996, ISO 8528-9:1995. Reciprocating internal combustion engine driven alternating current generating setsMeasurement and evaluation of mechanical vibrations
BS 7699-4:1994, IEC 60519-4:1977. Specification for safety in electroheat installationsParticular requirements for arc furnace installations
BS 7699-8:1994, IEC 60519-8:1983. Specification for safety in electroheat installationsParticular requirements for electro-slag remelting furnaces
BS 77:1958. Specification. Voltages for a.c. transmission and distribution systems
BS 770:1963. Methods for the chemical analysis of cheese
BS 7700:1994, ISO 10601:1993. Micaceous iron oxide pigments for paints. Specifications and test methods
BS 770-1:1986. Methods for chemical analysis of cheeseGeneral introduction
BS 7701:1993, ISO 10574:1993. Specification for float-type level gauges for measuring liquid levels in tanks containing refrigerated light-hydrocarbon fluids
BS 770-10:1986, ISO 5534:1985. Methods for chemical analysis of cheeseDetermination of total solids content (reference method)
BS 770-11:1997, ISO 12082:1997. Methods for chemical analysis of cheeseCalculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents in processed cheese and processed cheese products
BS 770-2:1976. Methods for chemical analysis of cheeseDetermination of water content (reference and routine methods)
BS 7702:1993, ISO 9200:1993. Guide to volumetric metering of viscous hydrocarbons
BS 770-3:1976. Methods for the chemical analysis of cheese.Determination of fat content (reference method)
BS 770-3:1989, ISO 1735:1987. Methods for chemical analysis of cheeseDetermination of fat content (reference method)
BS 770-4:1982, ISO 5943-1978. Methods for chemical analysis of cheese.Determination of chloride content. Potentiometric titration method
BS 770-4:1989, ISO 5943-1988. Methods for chemical analysis of cheeseDetermination of chloride content
BS 7704:1993, IEC 60836:1988. Specifications for silicone liquids for electrical purposes
BS 770-5:1976. Methods for chemical analysis of cheeseDetermination of pH value
BS 7705:1993, ISO 11169:1993. Specification for brake systems for special wheeled forestry machines
BS 770-6:1984, ISO 2962-1984. Methods for chemical analysis of cheeseDetermination of total phosphorus content. Molecular absorption spectrometric method
BS 7706:1993. Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws
BS 770-7:1976, ISO 2963-1974. Methods for chemical analysis of cheeseDetermination of citric acid content (reference method)
BS 7707:1993, ISO 9188:1993. Specification for power presses, mechanical straight-sided single-action type from 400 kN up to and including 4000 kN nominal force
BS 770-7:1997, ISO 2963:1997. Methods for chemical analysis of cheeseDetermination of citric acid content of cheese and processed cheese products (enzymatic method)
BS 770-8:1987. Methods for chemical analysis of cheeseDetermination of nitrogen content (reference method)
BS 7708:1993, ISO 9189:1993. Specification for power presses, mechanical straight-sided high-speed type of 250 kN up to 4000 kN nominal force
BS 770-9:1985, ISO 4099:1984. Methods for chemical analysis of cheeseDetermination of nitrate and nitrite contents. Cadmium reduction and photometry method
BS 7709-1:1993, ISO 10136-1:1993. Analysis of extract solutions of glassMethod for determination of silicon dioxide by molecular absorption spectrometry
BS 7709-2:1993, ISO 10136-2:1993. Analysis of extract solutions of glassMethod for determination of sodium oxide and potassium oxide by flame spectrometric methods
BS 7709-3:1993, ISO 10136-3:1993. Analysis of extract solutions of glassMethod for determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry
BS 7709-4:1993, ISO 10136-4:1993. Analysis of extract solutions of glassMethod for determination of aluminium oxide by molecular absorption spectrometry
BS 7709-5:1993, ISO 10136-5:1993. Analysis of extract solutions of glassMethod for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
BS 7709-6:1993, ISO 10136-6:1993. Analysis of extract solutions of glassMethod for determination of boron (III) oxide by molecular absorption spectrometry
BS 771:1992, ISO 800:1992. Specification for phenolic moulding materials
BS 7710-1:1993, ISO 9949-1:1993. Urine absorbing aids. Vocabulary.Conditions of urinary incontinence
BS 7710-2:1993, ISO 9949-2:1993. Urine absorbing aids. Vocabulary.Products
BS 7710-3:1993, ISO 9949-3:1993. Urine absorbing aids. Vocabulary.Identification of product types
BS 771-1:1980, ISO 800-1977. Phenolic moulding materials.Specification for physical properties (excluding type L2 material)
BS 7711-1:1994. Respiratory therapy equipmentSpecification for tubing and connectors
BS 7711-2:1994. Respiratory therapy equipmentSpecification for air entrainment devices
BS 7711-3:1994. Respiratory therapy equipmentSpecification for gas-powered nebulizers for the delivery of drugs
BS 771-2:1980. Phenolic moulding materials.Specification for physical properties of type L2 material
BS 7712:1993, ISO 8999:1993. Specification for graphical symbols for reciprocating internal combustion engines
BS 7713:1993, IEC 60944:1988. Guide for the maintenance of silicone transformer liquids
BS 7714:1993. Guide for care and handling of seals for fluid power applications
BS 7714:2005. Care and handling of seals for fluid power applications. Guide
BS 7715:1994. Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
BS 7716:1993, IEC 60848:1988. Preparation of function charts for control systems
BS 7718:1994. Code of practice for installation of fibre optic cabling
BS 7718:1996. Code of practice for installation of fibre optic cabling
BS 7719:1994. Specification for water-borne emulsion paints for interior use
BS 7720:1994. Specification for non-biological sterilization indicator systems for use in the Bowie and Dick test with alternative test loads
BS 7720:1995. Specification for non-biological sterilization indicators equivalent to the Bowie and Dick test
BS 7722:1994. Specification for surface covered PVC-U extruded hollow profiles with heat welded corner joints for plastics windows
BS 7722:2002. Surface covered PVC-U profiles for windows and doors. Specification
BS 7722:2010. Surface covered PVC-U profiles for windows and doorsets. Specification
BS 7723-1:1994, ISO 7507-1:1993. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum productsStrapping method
BS 7723-2:1994, ISO 7507-2:1993. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum productsOptical-reference-line method
BS 7723-3:1994, ISO 7507-3:1993. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum productsOptical-triangulation method
BS 7723-4:1995, ISO 7507-4:1995. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum productsInternal electro-optical distance-ranging method
BS 7723-6:1998, ISO/TR 7507-6:1997. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum productsRecommendations for monitoring, checking and verification of tank calibration and capacity table
BS 7724:1994. Specification for split pins (metric series)
BS 7725-1:1994, IEC 61223-1:1993. Evaluation and routine testing in medical imaging departments.General
BS 7725-2.1:1994, IEC 61223-2-1:1993. Evaluation and routine testing in medical imaging departments. Constancy tests.Method for film processors
BS 7725-2.2:1994, IEC 61223-2-2:1993. Evaluation and routine testing in medical imaging departments. Constancy tests.Method for radiographic cassettes and film changers and film-screen contact and relative sensitivity of the screen-cassette assembly
BS 7725-2.3:1994, IEC 61223-2-3:1993. Evaluation and routine testing in medical imaging departments. Constancy testsMethod for darkroom safelight conditions
BS 7728:1994, IEC 60916:1988
BS 7728:1994, IEC 60916:1988. Mechanical structures for electronic equipment. Terminology
BS 7730:1994, ISO 9583:1993. Method for liquid penetrant inspection of metallic surgical implants
BS 7731:1994, ISO 9584:1993. Method for radiographic examination of cast metallic surgical implants
BS 7732:1994, IEC 60652:1979. Guide to loading tests on overhead line towers
BS 7733:1994, IEC 60826:1991. Guide to loading and strength of overhead transmission lines
BS 7734:1994, ISO 8835-2:1993. Specification for anaesthetic circle breathing systems
BS 7735:1994, IEC 60354:1991. Guide to loading of oil-immersed power transformers
BS 7737-1:1995, IEC 60377-1:1973. Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHzGeneral
BS 7737-2:1995, IEC 60377-2:1977. Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHzResonance methods
BS 7738-1:1994. Specification for information systems products using SSADM (Structured Systems Analysis and Design Method)Implementation of SSADM version 4
BS 7739-1:1994, IEC 61243-1:1993. Voltage detectorsSpecification for capacitive type to be used for voltage exceeding 1 kV a.c.
BS 7742:1994, IEC 60844:1988. Specification for pre-recorded capacitance grooveless videodisc system 50 Hz/625 lines. PAL, on type VHD
BS 7744:1994, IEC 61245:1993. Guide to artificial pollution tests on high voltage insulators to be used on d.c. systems
BS 7745-1:1994, ISO 10145-1:1993. End mills with brazed helical hardmetal tips.Dimensions of end mills with parallel shank
BS 7745-2:1994, ISO 10145-2:1993. End mills with brazed helical hardmetal tips.Dimensions of end mills with taper shank
BS 7746:1994, ISO 11469:1993. Generic identification and marking of plastics products
BS 7747:1994, ISO 8380:1993. Forestry machinery. Portable brush cutters and grass trimmers. Cutting attachment guard strength
BS 7749:1994, IEC 60397:1972,IEC 60397A:1975. Guide to test methods for batch furnaces with metallic heating resistors
BS 7750:1992. Specification for environmental management systems
BS 7750:1994. Specification for environmental management systems
BS 7751-1:1994. Prevailing torque type wire thread insertsSpecification for ISO metric coarse pitch threads
BS 7751-2:1994. Prevailing torque type wire thread insertsSpecification for ISO metric fine pitch threads
BS 775-2:1974. Specification for contactorsA.C. contactors for voltages above 1 kV and up to and including 12 kV
BS 7752-1:1994+A1:2008. Free running type wire thread insertsSpecification for ISO metric coarse pitch threads
BS 7752-2:1994. Free running type wire thread insertsSpecification for ISO metric fine pitch threads
BS 7753:1994. Specification for performance of prevailing torque wire thread inserts
BS 7754:1994. Code of practice for garment evaluation by wearer trials
BS 7755-1.1:1997, ISO 11074-1:1996. Soil quality. Terminology and classificationTerms and definitions relating to the protection and pollution of soil
BS 7755-1.2:1999, ISO 11074-2:1998. Soil quality. Terminology and classificationTerms and definitions relating to sampling
BS 7755-1.4:2000, ISO 11074-4:1999. Soil quality. Terminology and classificationTerms and definitions related to the rehabilitation of soils and sites
BS 7755-2.6:1994, ISO 10381-6:1993. Soil quality. SamplingGuidance on the collection, handling and storage of soil for the assessment of aerobic microbial processes in soil
BS 7755-3.1:1994, ISO 11465:1993. Soil quality. Chemical methodsDetermination of dry matter and water content on a mass basis by a gravimetric method
BS 7755-3.10:1995, ISO 10693:1995. Soil quality. Chemical methodsDetermination of carbonate content. Volumetric method
BS 7755-3.11:1995, ISO 11048:1995. Soil quality. Chemical methodsDetermination of water-soluble and acid-soluble sulfate
BS 7755-3.12:1996, ISO 13536:1995. Soil quality. Chemical methodsDetermination of the potential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8.1
BS 7755-3.13:1998, ISO 11047:1998. Soil quality. Chemical methodsDetermination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil. Flame and electrothermal atomic absorption spectrometric methods
BS 7755-3.2:1995, ISO 10390:1994. Soil quality. Chemical methodsDetermination of pH
BS 7755-3.4:1995, ISO 11265:1994. Soil quality. Chemical methodsDetermination of the specific electrical conductivity
BS 7755-3.5:1995, ISO 11464:1994. Soil quality. Chemical methodsPretreatment of samples for physico-chemical analyses
BS 7755-3.6:1995, ISO 11263:1994. Soil quality. Chemical methodsDetermination of phosphorus. Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution
BS 7755-3.7:1995, ISO 11261:1995. Soil quality. Chemical methodsDetermination of total nitrogen. Modified Kjeldahl method
BS 7755-3.8:1995, ISO 10694:1995. Soil quality. Chemical methodsDetermination of organic and total carbon after dry combustion (elementary analysis)
BS 7755-3.9:1995, ISO 11466:1995. Soil quality. Chemical methodsExtraction of trace elements soluble in aqua regia
BS 7755-4.1.1:1995, ISO 11266:1995. Soil quality. Biological methods. BiodegradabilityGuidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions
BS 7755-4.2.1:1994, ISO 11268-1:1993. Soil quality. Biological methods. Effects of pollutants on soil faunaDetermination of acute toxicity to earthworms (Eisenia fetida) using artificial soil substrate
BS 7755-4.2.2:1998, ISO 11268-2:1998. Soil quality. Biological methods. Effects of pollutants on soil faunaDetermination of effects on reproduction on earthworms (Eisenia fetida)
BS 7755-4.2.3:1999, ISO 11268-3:1999. Soil quality. Biological methods. Effects of pollutants on soil faunaEffects of pollutants on earthworms. Guidance on the determination of effects in field situations
BS 7755-4.2.4:1999, ISO 11267:1999. Soil quality. Biological methods. Effects of pollutants on soil faunaInhibition of reproduction of Collembola (Folsomia candida) by soil pollutants
BS 7755-4.3.1:1994, ISO 11269-1:1993. Soil quality. Biological methods. Effects of pollutants on soil floraMethod for the measurement of inhibition of root growth
BS 7755-4.3.2:1996, ISO 11269-2:1995. Soil quality. Biological methods. Effects of pollutants on soil floraMethod for measuring the effects of chemicals on the emergence and growth of higher plants
BS 7755-4.4.3:1997, ISO 14238:1997. Soil quality. Biological methods. Effects of pollutants on microbesDetermination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes
BS 7755-4.4.4:1997, ISO 14239:1997. Soil quality. Biological methods. Effects of pollutants on microbesLaboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions
BS 7755-5.1:1996, ISO 11276:1995. Soil quality. Physical methodsDetermination of pore water pressure. Tensiometer method
BS 7755-5.2:1996, ISO 10573:1995. Soil quality. Physical methodsDetermination of water content in the unsaturated zone. Neutron depth probe method
BS 7755-5.3:1998, ISO 11508:1998. Soil quality. Physical methodsDetermination of particle density
BS 7755-5.4:1998, ISO 11277:1998. Soil quality. Physical methodsMethod by sieving and sedimentation
BS 7755-5.6:1999, ISO 11272:1998. Soil quality. Physical methodsDetermination of dry bulk density
BS 776-2:1972. Specification for materials for magnesium oxychloride (magnesite) flooringMetric units
BS 7762:1994, ISO 12302:1993. Plain bearings. Quality characteristics. Statistical process control (SPC)
BS 7763:1994, ISO 10753:1994. Method of assessment of the liability to breakdown in water of materials associated with coal seams
BS 7764:1994. Specification for hexagon slotted nuts and castle nuts
BS 7765:1994. Specification for detonators for civil use
BS 7766:1994. Specification for assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption
BS 7767:1994, IEC 61117:1992. Method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
BS 7768:1994. Recommendations for management of optical disk (WORM) systems for the recording of documents that may be required as evidence
BS 7769-1.1:1997, IEC 60287-1-1:1994. Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses.General
BS 7769-1.2:1994, IEC 60287-1-2:1993. Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses.Sheath eddy current loss factors for two circuits in flat formation
BS 7769-2.2:1997, IEC 60287-2-2:1995. Electric cables. Calculation of the current rating. Thermal resistanceA method for calculating reduction factors for groups of cables in free air, protected from solar radiation
BS 7769-3.1:1997, IEC 60287-3-1:1995. Electric cables. Calculation of the current rating. Sections on operating conditionsReference operating conditions and selection of cable type
BS 7770:1995. Guide to the preparation of climatic data and its application to building and civil engineering
BS 7771:1994. Code of practice for pasteurization of milk on farms and in small dairies
BS 7772:1994, ISO 12306:1994. Plain bearings. Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
BS 7773:1995. Code of practice for cleaning and preparation of metal surfaces
BS 7774:1994, ISO 3800:1993. Threaded fasteners. Axial load fatigue testing. Test methods and evaluation of results
BS 7775:1995. Specification for penstocks
BS 7775:2005. Penstocks for use in water and other liquid flow applications. Specification
BS 7776:1995. Glossary of torque terminology for threaded fasteners
BS 7777-1:1993. Flat-bottomed, vertical, cylindrical storage tanks for low temperature serviceGuide to the general provisions applying for design, construction, installation and operation
BS 7777-2:1993. Flat-bottomed, vertical, cylindrical storage tanks for low temperature serviceSpecification for the design and construction of single, double and full containment metal tanks for the storage of liquefied gas at temperatures down to -165°C
BS 7777-3:1993. Flat-bottomed, vertical, cylindrical storage tanks for low temperature serviceRecommendations for the design and construction of prestressed and reinforced concrete tanks and tank foundations, and for the design and installation of tank insulation, tank liners and tank coatings
BS 7777-4:1993. Flat-bottomed, vertical, cylindrical storage tanks for low temperature serviceSpecification for the design and construction of single containment tanks for the storage of liquid oxygen, liquid nitrogen and liquid argon
BS 7778:1994, ISO 11318:1993. Specification for connector assembly DF-1 for implantable cardiac defibrillators
BS 7779:1994. Specification for semi-transparent priming stains (stain basecoats) for joinery
BS 778:1966. Specification for steel pipes and joints for hydraulic purposes
BS 7780-1:1994, ISO 6194-1:1982. Specification for rotary shaft lip type sealsNominal dimensions and tolerances
BS 7780-2:1994, ISO 6194-2:1991. Specification for rotary shaft lip type seals.Vocabulary
BS 7780-3:1994, ISO 6194-3:1988. Rotary shaft lip type seals.Storage, handling and installation
BS 7780-4:1995. Specification for rotary shaft lip type sealsPerformance test procedures
BS 7780-5:1994, ISO 6194-5:1990. Specification for rotary shaft lip type seals.Identification of visual imperfections
BS 7781:1994. Procedure for type testing of small biological domestic wastewater treatment plants
BS 7782:1994, ISO 7870:1993. Control charts. General guide and introduction
BS 7783:1994, ISO 7966:1993. Acceptance control charts
BS 7785:1994, ISO 8258:1991. Shewhart control charts
BS 7786:1995. Specification for unsintered PTFE tape. General requirements
BS 7786:2006. Specification for unsintered PTFE tapes for general use
BS 7787:1994, ISO 10752:1994. Method for evaluation of the performance of coal sizing equipment
BS 7788:1995. Specification for formatting and exchanging EFT-POS messages between a single acceptor and acquirer
BS 7789:1995. Guide to design of measurement laboratories
BS 779:1976. Specification. Cast iron boilers for central heating and indirect hot water supply (44 kW rating and above)
BS 779:1989. Specification for cast iron boilers for central heating and indirect hot water supply (rated output 44 kW and above)
BS 7790-1:1995, ISO 11784:1994. Animal electronic identificationSpecification for code structure for farm animals
BS 7791:1995, ISO 10448:1994. Agricultural tractors. Hydraulic pressure for implements
BS 7792:1995, ISO 10630:1994. Specification for industrial plate screens
BS 7793-1:1995. Vitreous enamel coatings for use on bolted steel panelsSpecification for coatings on bolted steel panels for use in agricultural slurry tanks
BS 7793-2:1996. Vitreous enamel coatings for use on bolted steel panelsSpecification for coatings on bolted steel panels for use in industrial liquid storage tanks
BS 7794:1995. Specification for square-drive sockets, driving squares and accessories for power-driven socket wrenches
BS 7795:1995. Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
BS 7796:1995, ISO 6162:1994. Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series
BS 7797:1998. Specification for industrial duct heaters using metal-sheathed elements
BS 7798:1998. Specification for industrial immersion heaters using metal-sheathed elements
BS 7799 User Desktop Version (A5 PK5). Information security management. Code of practice for information security management
BS 7799-1:1995. Information security managementCode of practice for information security management systems
BS 7799-1:1999. Information security managementCode of practice for information security management
BS 7799-2:1998. Information security managementSpecification for information security management systems
BS 7799-2:1999. Information security managementSpecification for information security management systems
BS 7799-2:2002. Information security managementSpecification with guidance for use
BS 7799-3:2006. Information security management systemsGuidelines for information security risk management
BS 7800:1992. Specification for high octane (super) unleaded petrol (gasoline) for motor vehicles
BS 7800:1998. Specification for high octane (super) unleaded petrol (gasoline) for motor vehicles
BS 7800:2000. Automotive fuel. High octane (super) unleaded petrol. Specification
BS 7800:2006. Automotive fuel. High octane (super) unleaded petrol. Specification
BS 7801:1995. Code of practice for safe working on escalators and passenger conveyors in use
BS 7801:2004. Escalators and moving walks. Code of practice for safe working on escalators and moving walks
BS 7801:2011. Escalators and moving walks. Code of practice for safe working on escalators and moving walks
BS 7802:1995. Glossary of terms used in operational research
BS 7803:1995, IEC 61211:1994. Guide to insulators of ceramic material or glass for overhead-lines with a nominal voltage greater then 1000 V, puncture testing
BS 7804-1:1995, ISO 9884-1:1994. Tea sacksSpecification for a reference sack for palletized and containerized transport of tea
BS 7804-2:1999, ISO 9884-2:1999. Tea sacksPerformance specification for sacks for palletized and containerized transport of tea
BS 7805-1:1995. Swaged collar grooved rivetsSpecification for sizes up to and including 10 mm diameter
BS 7805-2:1997. Swaged collar grooved rivetsSpecification for sizes from 12.7 mm up to and including 34.9 mm
BS 7806:1995. Dry-type power transformers
BS 7807:1995. Code of practice for design, installation and servicing of integrated systems incorporating fire detection and alarm systems and/or other security systems for buildings other than dwellings
BS 7808:1995, IEC 61251:1993. Electrical insulating materials. A.C. voltage endurance evaluation. Introduction
BS 7809-1:1995, IEC 61068-1:1991. Polyester fibre woven tapesDefinitions, designation and general requirements
BS 7809-2:1995, IEC 61068-2:1991. Polyester fibre woven tapesMethods of test
BS 7810-1:1995, IEC 61067-1:1991. Specification for glass and glass polyester fibre woven tapesDefinitions, classification and general requirements
BS 7810-2:1995, IEC 61067-2:1992. Specification for glass and glass polyester fibre woven tapesMethods of test
BS 7811-2:1995, IEC 60544-2:1991. Guide for determining the effects of ionizing radiation on insulating materialsProcedures for irradiation and test
BS 7811-4:1995, IEC 60544-4:1985. Guide for determining the effects of ionizing radiation on insulating materialsClassification system for service in radiation environments
BS 7812:1995, ISO 4266:1994. Guide for selection, specification, installation, operation and maintenance of automatic liquid level and temperature measuring instruments on petroleum storage tanks
BS 7813:1995, ISO 4124:1994. Guide for statistical control of dynamic liquid hydrocarbon volumetric metering systems
BS 7814:1995. Specification for bolts and screws incorporating either underhead locking or anti-rotation features
BS 7815:1995, IEC 61087:1991. Guide for evaluating the discharges from a charged surface
BS 7816-1:1995, IEC 61244-1:1993. Determination of long-term radiation ageing in polymersTechniques for monitoring diffusion-limited oxidation
BS 7816-2:1997, IEC 61244-2:1996. Determination of long-term radiation ageing in polymersProcedures for predicting ageing at low dose rates
BS 7816-3:1998, IEC 61244-3:1998. Determination of long-term radiation ageing in polymersProcedures for in-service monitoring of low-voltage cable materials
BS 7818:1995. Specification for pedestrian restraint systems in metal
BS 7819:1995, IEC 61026:1991. Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials
BS 78-2:1965. Specification for cast iron spigot and socket pipes (vertically cast) and spigot and socket fittingsFittings
BS 7820-1:1995, ISO 10727:1995. Analysis of tea and tea productsTea and instant tea. Determination of caffeine content
BS 7821-1:1995. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kVGeneral requirements and requirements for transformers with highest voltage for equipment not exceeding 24 kV
BS 7821-2.1:1995. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high voltage and/or low voltage sideGeneral requirements
BS 7821-2.2:1998. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high voltage and/or low voltage sideCable boxes of type 1 for use on distribution transformers meeting the requirements of BS 7821-2.1
BS 7821-2.3:1998. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high voltage and/or low voltage sideCable boxes type 2 for use on distribution transformers meeting the requirements of BS 7821-2.1
BS 7821-3:1995. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kVSupplementary requirements for transformers with highest voltage for equipment equal to 36 kV
BS 7821-4:1995. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kVDetermination of the power rating of a transformer loaded with non-sinusoidal currents
BS 7821-6:2002, HD 428-6 S1:2002. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kVRequirements and tests concerning pressurized corrugated tanks
BS 7822-1:1995, IEC 60664-1:1992. Insulation coordination for equipment within low-voltage systemsPrinciples, requirements and tests
BS 7822-2.1:1999, IEC 60664-2-1:1997. Insulation coordination for equipment within low-voltage systems.Application guide. Dimensioning procedure worksheets and dimensioning examples
BS 7822-3:1995, IEC 60664-3:1992. Insulation coordination for equipment within low-voltage systemsUse of coatings to achieve insulation coordination of printed board assemblies
BS 7823-1:1995, ISO 11687-1:1995. Pedestal plain bearingsSpecification for pillow blocks
BS 7823-2:1995, ISO 11687-2:1995. Pedestal plain bearingsSpecification for side flange bearings
BS 7823-3:1995, ISO 11687-3:1995. Pedestal plain bearingsSpecification for centre flange bearings
BS 7824-3.3:1995, IEC 60819-3-3:1991. Non-cellulosic papers for electrical purposes. Specifications for individual materialsUnfilled aramid (aromatic polyamide) papers
BS 7825-1:1995. Calibration of rubber and plastics test equipmentSpecification for principles and general requirements
BS 7825-2:1996. Calibration of rubber and plastics test equipmentCalibration procedures
BS 7825-3.1:1997. Calibration of rubber and plastics test equipment. Calibration schedulesThermal properties
BS 7825-3.10:1998. Calibration of rubber and plastics test equipment. Calibration schedulesConditioning, sample and test piece preparation
BS 7825-3.11:1998. Calibration of rubber and plastics test equipment. Calibration schedulesRubber polymer identification and chemical properties
BS 7825-3.2:1997. Calibration of rubber and plastics test equipment. Calibration schedulesElectrical properties
BS 7825-3.3:1997. Calibration of rubber and plastics test equipment. Calibration schedulesMechanical properties of plastics
BS 7825-3.4:1998. Calibration of rubber and plastics test equipment. Calibration schedulesMechanical properties of rubber
BS 7825-3.5:1997. Calibration of rubber and plastics test equipment. Calibration schedulesOptical and weathering properties
BS 7825-3.6:1997. Calibration of rubber and plastics test equipment. Calibration schedulesDimensional properties
BS 7825-3.7:1998. Calibration of rubber and plastics test equipment. Calibration schedulesRheological properties
BS 7825-3.8:1998. Calibration of rubber and plastics test equipment. Calibration schedulesDegradation and environmental properties
BS 7825-3.9:1998. Calibration of rubber and plastics test equipment. Calibration schedulesFlammability characteristics
BS 7826-1:1995, IEC 60493-1:1974. Guide for the statistical analysis of ageing test dataMethods based on mean values of normally distributed test results
BS 7827:1996. Code of practice for designing, specifying, maintaining and operating emergency sound systems at sports venues
BS 7827:2011. Code of practice for designing, specifying, maintaining and operating emergency sound systems at sports venues
BS 7830:1996. Guide to the design and preparation of on-screen documentation for users of application software
BS 7831:1995, IEC 60370:1971. Test procedure for thermal endurance of insulating varnishes. Electric strength method
BS 7832:1995, ISO 9699:1994. Performance standards in building. Checklist for briefing. Contents of brief for building design
BS 7833:1995. Specification for firefighters' axes with glass fibre shafts
BS 7834:1995, ISO 9951:1993. Specification for turbine meters used for the measurement of gas flow in closed conduits
BS 7835:1996. Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V having low emission of smoke and corrosive gases when affected by fire
BS 7835:2000. Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire
BS 7835:2007. Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods
BS 7836:1996, IEC 60450:1974. Measurement of the average viscometric degree of polymerization of new and aged electric papers
BS 7837:1996. Specification for flammability performance for textiles used in the construction of marquees and similar textile structures
BS 7838:1996. Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to DN 50
BS 7839:1995, ISO 10911:1994. Solid hardmetal end-mills with parallel shanks. Dimensions
BS 7842:1996. Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
BS 7843-1.1:1996. Guide to the acquisition and management of meteorological precipitation data. Network designThe user requirement for precipitation data
BS 7843-1.2:1996. Guide to the acquisition and management of meteorological precipitation data. Network designNetwork design and monitoring
BS 7843-1:2012. Acquisition and management of meteorological precipitation data from a raingauge networkGuide for the design, development and review of a raingauge network
BS 7843-2.1:1996. Guide to the acquisition and management of meteorological precipitation data. Field practices and data managementTechnical aspects in the field
BS 7843-2.2:1996. Guide to the acquisition and management of meteorological precipitation data. Field practices and data managementMethods of observation and data tabulation
BS 7843-2.3:1996. Guide to the acquisition and management of meteorological precipitation data. Field practices and data managementData management
BS 7843-2.4:1996. Guide to the acquisition and management of meteorological precipitation data. Field practices and data managementAreal rainfall
BS 7843-2:2012. Acquisition and management of meteorological precipitation data from a raingauge networkCode of practice for operating raingauges and managing precipitation data
BS 7843-3.1:1999. Guide to the acquisition and management of meteorological precipitation data. Specification for raingaugesStorage raingauges
BS 7843-3.2:2005. Guide to the acquisition and management of meteorological precipitation dataSpecifcation for raingauges
BS 7843-3:2012. Acquisition and management of meteorological precipitation data from a gauge networkCode of practice for the design and manufacture of storage and automatic collecting raingauges
BS 7843-4:2012. Acquisition and management of meteorological precipitation data from a raingauge networkGuide for the estimation of areal rainfall
BS 7844-1:1996. Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kVGeneral requirements and requirements for transformers with highest voltage for equipment not exceeding 24 kV
BS 7844-2:1996. Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kVSupplementary requirements for transformers with highest voltage for equipment equal to 36 kV
BS 7844-3:1998. Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kVDetermination of the power rating of a transformer loaded with non-sinusoidal current
BS 7845:1996. Guide to the use of BS 3939 and BS EN 60617. Graphical symbols for diagrams
BS 7846:1996. Specification for 600/1000 V armoured fire-resistant electric cables having low emission of smoke and corrosive gases when affected by fire
BS 7846:2000. Electric cables. 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
BS 7846:2009. Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000 V, having low emission of smoke and corrosive gases when affected by fire. Specification
BS 7847:1996, ISO 4399:1995. Fluid power systems and components. Connectors and associated components. Nominal pressures
BS 7848:1996, ISO 10825:1995. Gears. Wear and damage to gear teeth. Terminology
BS 7849-1:1996, ISO 11223-1:1995. Petroleum and liquid petroleum products. Direct static measurements. Contents of vertical storage tanksMass measurement by hydrostatic tank gauging
BS 7850-1:1992. Total quality managementGuide to management principles
BS 7850-2:1992. Total quality managementGuide to quality improvement methods
BS 7850-2:1994, ISO 9004-4:1993. Total quality managementGuidelines for quality improvement
BS 7851:1996, IEC 61119-7:1995. Digital audio tape cassette system (DAT). DAT logo application rule
BS 7852:1997. Code of practice for design of canoes and kayaks
BS 7853:1996, ISO 8608:1995. Mechanical vibration. Road surface profiles. Reporting of measured data
BS 7854-2:1996, ISO 10816-2:1996. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsLarge land-based steam turbine generator sets in excess of 50 MW
BS 7854-3:1998, ISO 10816-3:1998. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsIndustrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
BS 7854-4:1998, ISO 10816-4:1998. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsGas turbine driven sets excluding aircraft derivatives
BS 7854-6:1996, ISO 10816-6:1995. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating partsReciprocating machines with power ratings above 100 kW
BS 7855-1:1996. Metric rivets for the attachment of friction liningsSpecification for semi-tubular rivets
BS 7856:1996. Code of practice for design of alternating current, watthour meters for active energy (classes 1 and 2)
BS 7856:2013. Code of practice for special design and other features of alternating current watthour meters for active energy (MID accuracy classes A and B) for use in the UK
BS 7857-1:1996, ISO 13720:1995. Methods for microbiological examination of meat and meat productsEnumeration of Pseudomonas spp.
BS 7857-2:1996, ISO 13721:1995. Methods for microbiological examination of meat and meat productsEnumeration of lactic acid bacteria. Colony-count technique at 30°C
BS 7857-3:1997, ISO 13722:1996. Methods for microbiological examination of meat and meat productsEnumeration of Brochothrix thermosphacta. Colony-count technique
BS 7858:1996. Code of practice for security screening of personnel employed in a security environment
BS 7858:2004. Security screening of individuals employed in a security environment. Code of practice
BS 7858:2006+A2:2009. Security screening of individuals employed in a security environment. Code of practice
BS 7858:2012. Security screening of individuals employed in a security environment. Code of practice
BS 7859:1996, ISO 6976:1995. Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition
BS 7860:1996. Specification for carbon monoxide detectors (electrical) for domestic use
BS 7861-1:1996. Strata reinforcement support system components used in coal minesSpecification for rockbolting
BS 7861-1:2007. Strata reinforcement support system components used in coal minesSpecification for rockbolting
BS 7861-2:1997. Strata reinforcement support system components used in coal minesSpecification for birdcaged cablebolting
BS 7861-2:2009. Strata reinforcement support systems components used in coal minesSpecification for flexible systems for roof reinforcement
BS 7862:1996, ISO 14104:1995. Gears. Surface temper etch inspection after grinding
BS 7863:1996. Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers
BS 7863:2009. Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers
BS 7864:1997. Specification for plastics containers for surface coatings
BS 7865:1997. Specification for steel electrical conductor rail for railway motive power supply
BS 7866:1996. Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
BS 7867:1997. Specification for portable fire extinguishers for use in aircraft
BS 7868:1996, IEC 61295:1994. Guide for calibration tapes for broadcast VTRs
BS 7870-1:1996. LV and MV polymeric insulated cables for use by distribution and generation utilitiesGeneral
BS 7870-1:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesGeneral
BS 7870-2:1996. LV and MV polymeric insulated cables for use by distribution and generation utilitiesMethods of test
BS 7870-2:1999. LV and MV polymeric insulated cables for use by distribution and generation utilitiesMethods of test
BS 7870-2:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesMethods of test
BS 7870-3.1:1996. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVPVC and XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS 7870-3.10:2001
BS 7870-3.10:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVPVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS 7870-3.10:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVPVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS 7870-3.11:2001
BS 7870-3.11:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVXLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS 7870-3.11:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVXLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS 7870-3.11:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS 7870-3.12:2001
BS 7870-3.12:2001. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV
BS 7870-3.12:2001. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV
BS 7870-3.12:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire
BS 7870-3.2:1996. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVPVC insulated split concentric cables with copper conductors
BS 7870-3.20:2001
BS 7870-3.20:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVPVC insulated split concentric cables with copper or aluminium conductors
BS 7870-3.20:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVPVC insulated split concentric cables with copper or aluminium conductors
BS 7870-3.21:2001
BS 7870-3.21:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVXLPE insulated split concentric cables with copper or aluminium conductors
BS 7870-3.21:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVXLPE insulated split concentric cables with copper or aluminium conductors
BS 7870-3.21:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors
BS 7870-3.22:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire
BS 7870-3.3:1996. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVSpecification for XLPE insulated combined neutral and earth cables with solid aluminium conductors
BS 7870-3.4:1996. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVXLPE and HEPR insulated combined neutral and earth aluminium or copper wire concentric cables with solid aluminium conductors
BS 7870-3.40:2001
BS 7870-3.40:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVXLPE insulated, copper wire waveform concentric cables with solid aluminium conductors
BS 7870-3.40:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kVXLPE insulated, copper wire waveform concentric cables with solid aluminium conductors
BS 7870-3.40:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors
BS 7870-3.50:2005. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire. (Implementation of HD 603)
BS 7870-3.50:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire
BS 7870-4.10:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kVSingle-core 11 kV and 33 kV cables
BS 7870-4.10:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables with extruded insulation of rated voltages of 11 kV to 33 kV. Single-core 11 kV to 33 kV cables
BS 7870-4.11:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kVSingle-core 33 kV lead sheathed cables
BS 7870-4.11:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV. Single-core 33 kV lead sheathed cables
BS 7870-4.12:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kVSingle core 11 kV copper foil sheath cables
BS 7870-4.13:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kVSingle core 33 kV copper wire/foil sheath cables
BS 7870-4.20:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kVThree-core 11 kV cables
BS 7870-4.20:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for distribution cables with extruded insulation for rated voltages of 11 kV to 33 kV. Three-core 11 kV cables
BS 7870-5:1999. LV and MV polymeric insulated cables for use by distribution and generation utilitiesPolymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution
BS 7870-5:2011. LV and MV polymeric insulated cables for use by distribution and generation utilitiesPolymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution
BS 7870-6.1:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stationsPVC insulated and PVC sheathed cables
BS 7870-6.2:1999. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations
BS 7870-6.3:1999. LV and MV polymeric insulated cables for use by distribution and generation utilitiesSpecification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations
BS 7870-7.1:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stationsSingle core and 3-core cables with halogenated materials and with aluminium or steel wire armouring
BS 7870-7.2:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stationsSingle-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring
BS 7870-8.1:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below groundSingle wire armoured and PVC sheathed multicore cable with copper conductors
BS 7870-8.2:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below groundSingle wire armoured and PVC sheathed multipair cable with copper conductors
BS 7870-8.3:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below groundSingle wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance
BS 7870-8.4:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below groundSingle wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance
BS 7870-8.5:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below groundSingle wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath
BS 7870-8.6:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below groundSingle wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors
BS 787-1:1969. Specification for mining type flameproof gate-end boxes.Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)
BS 7871-1:1996. Pneumatic conveyingGlossary of terms
BS 7871-2:1998. Pneumatic conveyingGlossary of equipment
BS 787-2:1968. Specification for mining type flameproof gate-end boxes.Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)
BS 7872:1996. Code of practice for operation of cash-in-transit services (collection and delivery)
BS 7872:2002. Manned security services. Cash-in-transit services (collection and delivery). Code of practice
BS 7872:2011. Manned security services. Cash and valuables in transit services (collection and delivery). Code of practice
BS 787-3:1971. Specification for mining type flameproof gate-end boxes.Gate-end boxes with lighting transformers
BS 7873:1996. Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes
BS 787-4:1972. Specification for mining type flameproof gate-end boxesGate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V)
BS 7874:1998. Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines
BS 7875:1996. Specification for saddle trees made from synthetic materials
BS 7875:2009. Synthetic saddle trees. Specification
BS 7876:1996. Classification of prints
BS 7877:1999. Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers
BS 7878-1:1997. Materials used in communication cablesPVC insulation compounds
BS 7878-2:1997. Materials used in communication cablesPVC sheathing compounds
BS 7878-3:1997. Materials used in communication cablesPE insulation
BS 7878-5:1997. Materials used in communication cablesPolypropylene insulation compounds
BS 7878-6:1997. Materials used in communication cablesHalogen free flame retardant insulation compounds
BS 7878-7:1997. Materials used in communication cablesHalogen free flame retardant thermoplastic sheathing compounds
BS 7878-8:1997. Materials used in communication cablesFilling compounds for filled cables
BS 7879:1997. Sectional specification for equipment cables to be used for digital and analogue communications
BS 7880:1997. Code of practice for draught control of existing doors and windows in housing using draughtstrips
BS 7881:1997. Method of test for petrol filters
BS 7882:1997. Method for calibration and classification of torque measuring devices
BS 7882:2008. Method for calibration and classification of torque measuring devices
BS 7883:1997. Code of practice for application and use of anchor devices conforming to BS EN 795
BS 7883:2005. Code of practice for the design, selection, installation, use andmainten ance of anchor devices conforming to BS EN 795
BS 7884:1997. Specification for copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems
BS 7885:1997. Code of practice for safe entry into silos
BS 7886:1997. Method of measurement of hydrogen permeation and the determination of hydrogen uptake and transport in metals by an electrochemical technique
BS 7887:1997, IEC 61390:1996. Ultrasonics. Real-time pulse-echo systems. Guide for test procedures to determine performance specifications
BS 7888-2:1998
BS 7888-4.1:1998. Test requirements for MV accessories.Accessories for cables with extruded insulation
BS 7888-4.1:2006+A1:2008, HD 629.1 S2:2006+A1:2008
BS 7888-4.1:2006+A1:2008, HD 629.1 S2:2006+A1:2008. Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kVCables with extruded insulation
BS 7888-4.2:2006+A1:2008, HD 629.2 S2:2006+A1:2008
BS 7888-4.2:2006+A1:2008, HD 629.2 S2:2006+A1:2008. Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kVCables with impregnated paper insulation
BS 7889:1997
BS 7889:1997. Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V
BS 7889:2012. Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations
BS 7890:1996. Method for achieving good payment performance in commercial transactions
BS 7892:1997. Specification for bitumen seal coatings on cement mortar linings in ductile iron pipes and fittings
BS 7892:2000. Specification for seal coats on cement mortar lined ductile iron pipes and fittings
BS 7893:1997. Specification for pressure sensitive adhesive closing and sealing tapes for use with sterilization packaging materials
BS 7894:2003. MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV
BS 7895:1997. Specification for bayonet lampholders with enhanced safety
BS 7896:1997. Securities. Specification for the format and structure of names and addresses used in securities transactions for the business of registrars
BS 7897-1:1997, ISO 56-1:1979. Specification for lac and shellacHand-made shellac
BS 7897-2:1997, ISO 56-2:1979. Specification for lac and shellacMachine-made shellac
BS 7897-3:1997, ISO 57:1975. Specification for lac and shellacBleached lac
BS 7898:1997. Guide to hydrometric data management
BS 7899-1:1997. Code of practice for assessment of hazard to life and health from fireGeneral guidance
BS 7899-2:1999. Code of practice for assessment of hazard to life and health from fireGuidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires
BS 7900:1998. Specification for examination of the surface texture of precision steel castings
BS 7901:2002. Specification for recovery vehicles and vehicle recovery equipment
BS 7903:1997. Guide to selection and use of gully tops and manhole covers for installation within the highway
BS 7904:1998. Guide to smoke measurement units. Their basis and use in smoke opacity test methods
BS 7905-1:2001. Lifting equipment for performance, broadcast and similar applicationsSpecification for the design and manufacture of above stage equipment (excluding trusses and towers)
BS 7905-2:2000. Lifting equipment for performance, broadcast and similar applicationsSpecification for design and manufacture of aluminium and steel trusses and towers
BS 7906-1:2005. Use of lifting equipment for performance, broadcast and similar applicationsCode of practice for installation, use and removal of above stage equipment (excluding trusses and towers)
BS 7906-2:2000. Lifting equipment for performance, broadcast and similar applicationsCode of practice for use of aluminium and steel trusses and towers
BS 7907:1997. Code of practice for the design and manufacture of children's clothing to promote mechanical safety
BS 7907:2007. Code of practice for the design and manufacture of children's clothing to promote mechanical safety
BS 7908:1999. Packaging. Temperature and time-temperature indicators. Performance specification and reference testing
BS 7909:1998. Code of practice for design and installation of temporary distribution systems delivering a.c. electrical supplies for lighting, technical services and other entertainment related purposes
BS 7909:2008. Code of practice for temporary electrical systems for entertainment and related purposes
BS 7909:2011. Code of practice for temporary electrical systems for entertainment and related purposes
BS 791:1975. Specification for solid-stem calorimeter thermometers
BS 791:1990. Specification for solid-stem calorimeter thermometers
BS 7910:1999. Guide on methods for assessing the acceptability of flaws in metallic structures
BS 7910:2005. Guide to methods for assessing the acceptability of flaws in metallic structures
BS 7911:1998. Specification for organizations conducting market research
BS 7911:2003. Specification for organizations conducting market research
BS 7913:1998
BS 7913:1998. Guide to the principles of the conservation of historic buildings
BS 7914:1998
BS 7914:1998. Method of test for penetration of erythemally weighted solar ultraviolet radiation through clothing fabrics
BS 7915:1998
BS 7915:1998. Ergonomics of the thermal environment. Guide to design and evaluation of working practices for cold indoor environments
BS 7916:1998
BS 7916:1998. Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes
BS 7917:1999
BS 7917:1999. Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS 7918-1:1999
BS 7918-1:1999. Visual imperfections in rubber productsVocabulary
BS 7919:2001
BS 7919:2001. Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
BS 7919:2001. Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
BS 792:1973. Specification for mild steel dustbins
BS 7920:1998. Specification for luminance meters
BS 7920:2005. Luminance meters. Requirements and test methods
BS 7921:1998. Cone top cans of nominal volumes 125 ml to 1000 ml for liquid products. Specification
BS 7924:1999
BS 7924:1999. Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp
BS 7925-1:1998
BS 7925-1:1998. Software testing.Vocabulary
BS 7925-2:1998
BS 7925-2:1998. Software testing.Software component testing
BS 7926:1998
BS 7926:1998. Quantitative micrographic methods to determine the percentage content of non-metallic inclusions in cast steel
BS 7927:1998
BS 7927:1998. Heating appliances for domestic applications. Portable apparatus designed to detect and measure specific combustion flue gas products. Requirements
BS 7928:1998
BS 7928:1998. Specification for head protectors for cricketers
BS 7928-2:2009
BS 7928-2:2009. Head and face protection for cricketersFace protectors for cricket wicket-keepers
BS 7929:1999
BS 7929:1999. Guide for the verification of a pump casing design procedure
BS 7930-1:1998
BS 7930-1:1998. Specification for eye-protectors for racket sportsSquash
BS 7931:1998
BS 7931:1998. Secure carriage of parcels. Code of practice
BS 7932:1998
BS 7932:1998. Method for determination of polished paver value (PPV)
BS 7932:2003
BS 7932:2003. Determination of the unpolished and polished pendulum test value of surfacing units
BS 7933-1:1998
BS 7933-1:1998. Electric cables. Accessories. Material characterizationResinous compounds before cure and in the cured state
BS 7933-1:2007, HD 631.1 S2:2007
BS 7933-1:2007, HD 631.1 S2:2007. Electric cables. Accessories. Material characterisationFingerprinting and type tests for resinous compounds
BS 7933-2:2007, HD 631.2:2007
BS 7933-2:2007, HD 631.2:2007. Electric cables. Accessories. Material characterisationFingerprinting and type tests for heat shrinkable components for low voltage applications
BS 7933-3:2008, HD 631.3:2008
BS 7933-3:2008, HD 631.3:2008. Electric cables. Accessories. Material characterisationFingerprinting for heat shrinkable components for medium voltage applications from 3,6/6 (7,2) kV up to 20,8/36 (42) kV
BS 7933-4:2008, HD 631.4:2008
BS 7933-4:2008, HD 631.4:2008. Electric cables. Accessories. Material characterisationFingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
BS 7935-1:2004
BS 7935-1:2004. Constant amplitude dynamic force calibrationCalibration and verification of non-resonant uniaxial dynamic testing systems. Method
BS 7935-2:2004
BS 7935-2:2004. Constant amplitude force calibrationCalibration of the calibration device instrumentation to be used for the dynamic calibration of non-resonant uniaxial dynamic testing systems. Method
BS 7937:2000
BS 7937:2000. Specification for portable fire extinguishers for use on cooking oil fires (class F)
BS 7939:1999
BS 7939:1999. Smoke security devices. Code of practice for manufacture, installation and maintenance
BS 7940:1999
BS 7940:1999. Analogue PSTN terminal support interface
BS 7941-1:1999
BS 7941-1:1999. Methods for measuring the skid resistance of pavement surfacesSide-way force coefficient routine investigation machine
BS 7941-1:2006
BS 7941-1:2006. Methods for measuring the skid resistance of pavement surfacesSideway-force coefficient routine investigation machine
BS 7941-2:2000
BS 7941-2:2000. Methods for measuring the skid resistance of pavement surfacesTest method for measurement of surface skid resistance using the GripTester braked wheel fixed slip device
BS 7942:2000
BS 7942:2000. Thermostatic mixing valves for use in care establishments
BS 7942:2011
BS 7942:2011. Thermostatic mixing valves for use in care establishments. Requirements and test methods
BS 7943:1999
BS 7943:1999. Guide to the interpretation of petrographical examinations for alkali-silica reactivity
BS 7944:1999
BS 7944:1999. Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets
BS 7945:1999
BS 7945:1999. Non-domestic furniture. Seating. Determination of stability
BS 7946:1997, IEC 61320:1996
BS 7946:1997, IEC 61320:1996. Handbook of audio and video symbols
BS 7947:1997, IEC 61602:1996
BS 7947:1997, IEC 61602:1996. Connectors used in the field of audio, video and audiovisual engineering
BS 7948-1:1997
BS 7948-1:1997. Films for wrapping rubber bales.Non-strippable high melting point films
BS 7949:1999
BS 7949:1999. Children's clothing. Requirements for protection against erythemally weighted solar ultraviolet radiation
BS 795:1983
BS 795:1983. Specification for ampoules
BS 7950:1997
BS 7950:1997. Specification for enhanced security performance of windows for domestic applications
BS 7951:2000
BS 7951:2000. Electricity meters. Alternating-current single-phase static watt-hour telemeters of accuracy class 1 or 2
BS 7952:2001
BS 7952:2001. Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances
BS 7953:1999
BS 7953:1999. Entrance flooring systems. Selection, installation and maintenance
BS 7954:1999
BS 7954:1999. Beaded desiccant activated alumina. Specification
BS 7955:1999
BS 7955:1999. Containment nets and sheets on construction works. Specification for performance and test methods
BS 7956:2000
BS 7956:2000. Specification for primers for woodwork
BS 7957:2000
BS 7957:2000. Vitreous enamel systems. Determination of self-cleaning properties
BS 7958:1999
BS 7958:1999. Closed-circuit television (CCTV). Management and operation. Code of practice
BS 7958:2005
BS 7958:2005. Closed-circuit television (CCTV). Management and operation. Code of practice
BS 7958:2009
BS 7958:2009. Closed circuit television (CCTV). Management and operation. Code of practice
BS 7959-1:2000
BS 7959-1:2000. Materials used for the control of liquid spillagesDetermination of sorbency
BS 7959-1:2004
BS 7959-1:2004. Materials used for the control of liquid spillagesDetermination of sorbency
BS 7959-2:2000
BS 7959-2:2000. Materials used for the control of liquid spillagesDetermination of water repellency or buoyancy for hydrophobic (oil sorbent) materials
BS 7959-3:2007
BS 7959-3:2007. Materials used for the control of liquid spillagesColour coding of sorbent materials
BS 7960:1999
BS 7960:1999. Door supervisors/stewards. Code of practice
BS 7960:2005
BS 7960:2005. Door supervisors. Code of practice
BS 7961:2004
BS 7961:2004. Specification for a device for measuring the static vertical mass (noseweight)at the coupling point of the towed vehicle.
BS 7962:2000
BS 7962:2000. Black materials for masking existing road markings. Specification
BS 7963:2000
BS 7963:2000. Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearing personal protective equipment
BS 7965:2000
BS 7965:2000. The selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
BS 7965:2009
BS 7965:2009. Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
BS 7966:2000
BS 7966:2000. Recommendations for design of cork removal devices
BS 7967-1:2005
BS 7967-1:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliancesGuide for identifying and managing sources of fumes, smells, spillage/leakage of combustion products and carbon monoxide detector activation
BS 7967-2:2005
BS 7967-2:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliancesGuide for using electronic portable combustion gas analysers in the measurement of carbon monoxide and the determination of combustion performance
BS 7967-3:2005
BS 7967-3:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliancesGuide for responding to measurements obtained from electronic portable combustion gas analysers
BS 7967-4:2007
BS 7967-4:2007. Carbon monoxide in dwellings and the combustion performance of gas-fired appliancesGuide for using electronic portable combustion gas analysers as part of the process of servicing and maintenance of gas-fired appliances
BS 7967-5:2010
BS 7967-5:2010. Carbon monoxide in dwellings and other premises and the combustion performance of gas-fired appliancesGuide for using electronic portable combustion gas analysers in non-domestic premises for the measurement of carbon monoxide and carbon dioxide levels and the determination of combustion performance
BS 7969:2004
BS 7969:2004. Adhesives. Ethyl and methyl cyanoacrylate types 1,2 and 3
BS 7970:2005
BS 7970:2012
BS 7971-1:2002. Protective clothing and equipment for use in violent situations and in trainingGeneral requirements
BS 7971-10:2004. Protective clothing and equipment for use in violent situations and in trainingCoveralls. Requirements and test methods
BS 7971-11:2006. Protective clothing and equipment for use in violent situations and in trainingFoot and ankle protectors and foot protectors. Requirements and test methods
BS 7971-2:2003. Protective clothing and equipment for use in violent situations and in trainingGuidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment
BS 7971-3:2002. Protective clothing and equipment for use in violent situations and in trainingPersonal defence shields. Requirements and test methods
BS 7971-4:2002. Protective clothing and equipment for use in violent situations and in trainingLimb protectors. Requirements and test methods
BS 7971-5:2004. Protective clothing and equipment for use in violent situations and in trainingFootwear. Requirements and test methods
BS 7971-6:2003. Protective clothing and equipment for use in violent situations and in trainingGloves for protection against mechanical, thermal and chemical hazards. Requirements and test methods
BS 7971-7:2003. Protective clothing and equipment for use in violent situations and in trainingSlash resistant gloves. Requirements and test methods
BS 7971-8:2003. Protective clothing and equipment for use in violent situations and in trainingBlunt trauma torso, shoulder, abdomen and genital protectors. Requirements and test methods
BS 7972:2001+A1:2009. Safety requirements and test methods for children's bedguards for domestic use
BS 7973-1:2001. Spacers and chairs for steel reinforcement and their specificationProduct performance requirements
BS 7973-2:2001. Spacers and chairs for steel reinforcement and their specificationFixing and application of spacers and chairs and tying of reinforcement
BS 7974:2001. Application of fire safety engineering principles to the design of buildings. Code of practice
BS 7976-1:2002+A1:2013. Pendulum testers Specification
BS 7976-2:2002+A1:2013. Pendulum testersMethod of operation
BS 7976-3:2002+A1:2013. Pendulum testersMethod of calibration
BS 7977-1:2002. Specification for safety and rational use of energy of domestic gas appliancesRadiant/convectors
BS 7977-1:2009. Specification for safety and rational use of energy of domestic gas appliancesRadiant/convectors
BS 7977-2:2003. Specification for safety and rational use of energy of domestic gas appliancesCombined appliances. Gas fire/back boiler
BS 7979:2001. Specification for limestone fines for use with Portland cement
BS 7980:2003+A1:2012. Vehicle lifts. Installation, maintenance, thorough examination and safe use. Code of practice
BS 7981:2002. Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs)
BS 7982:2001. Guidance on the environmental impact of large-scale fires involving plastics materials
BS 7983:2001. Requirements for payphones for networks other than the ISDN
BS 7984:2001. Keyholding and response services. Code of practice
BS 7984:2008. Keyholding and response services. Code of practice
BS 7985:2002. Code of Practice for the use of rope access methods for industrial purposes
BS 7985:2009. Code of practice for the use of rope access methods for industrial purposes
BS 7985:2013. Code of practice for the use of rope access methods for industrial purposes. Recommendations and guidance supplementary to BS ISO 22846
BS 7986:2001. Specification for data quality metrics for industrial measurement and control systems
BS 7986:2005. Data quality metrics for industrial measurement and control systems. Specification
BS 7987:2001+A1:2006. Road traffic signal systems
BS 7988:2002. Code of practice for the use of information technology (IT) in the delivery of assessments
BS 7989:2001. Specification for recirculatory filtration fume cupboards
BS 7990:2003. Tube furnace method for the determination of toxic product yields in fire effluents
BS 799-2:1981. Specification for oil burning equipment.Vaporizing burners
BS 799-2:1991. Oil burning equipmentSpecification for vaporizing burners
BS 7992:2002. Code of practice for exterior deterrent systems
BS 799-3:1981. Oil burning equipmentAutomatic and semi-automatic atomizing burners up to 36 litres per hour
BS 7993:2011. Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods
BS 799-4:1972. Specification for oil burning equipment.Atomizing burners over 36 litres per hour and associated equipment for single burner and multi burner installations
BS 799-4:1991. Oil burning equipmentSpecification for atomizing burners (other than monobloc type) together with associated equipment for single burner and multi burner installations
BS 799-5:1975. Specification for oil burning equipment.Oil storage tanks
BS 799-5:1987. Oil burning equipmentSpecification for oil storage tanks
BS 799-5:2010. Oil burning equipmentCarbon steel oil storage tanks. Specification
BS 799-6:1979, ISO 3544-1978. Specification for oil burning equipment.Safety times and safety, control and monitoring devices for atomizing oil burners of the monobloc type
BS 7996:2009. Torque measuring devices. Calibration and classification using continual torque application. Method
BS 799-7:1988, EN 225:1987. Oil burning equipmentSpecification for dimensions of atomizing oil burner pumps with rotating shaft and external drive
BS 7997:2003. Products for tactile paving surface indicators. Specification
BS 799-8:1988, EN 226:1987. Oil burning equipmentSpecification for connecting dimensions between atomizing oil burners and heat generators
BS 7998-3:2002 Version 1, HD 245.3 S3:2001,IEC 60027-3:1989. Letter symbols to be used in electrical technologyLogarithmic quantities and units
BS 7998-3:2002, IEC 60027-3:2002. Letter symbols to be used in electrical technologyLogarithmic and related quantities, and their units
BS 7F 34:2002. Light and medium duty linen (flax) sewing thread for aerospace purposes
BS 7F 35:1985. Specification for braided linen (flax) lacing cord for aerospace purposes
BS 7F 47:1990. Specification for cotton tape for aerospace purposes
BS 7L 37:1989. Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
BS 7S 1:1964. Specification for aircraft material. Carbon steel bright bars for machining (35/45 tonf/sq in; maximum size, 4 inches diameter or minor sectional dimension)
BS 7S 80:2002. High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm)
BS 800:1983. Specification for radio interference limits and measurements for household appliances, portable tools and other electrical equipment causing similar types of interference
BS 800:1988, EN 55014:1987. Specification for limits and methods of measurement of radio interference characteristics of household electrical appliances, portable tools and similar electrical apparatus
BS 8000-1:1989. Workmanship on building sitesCode of practice for excavation and filling
BS 8000-10:1989. Workmanship on building sitesCode of practice for plastering and rendering
BS 8000-10:1995. Workmanship on building sitesCode of practice for plastering and rendering
BS 8000-11.1:1989. Workmanship on building sites. Code of practice for wall and floor tilingCeramic tiles, terrazzo tiles and mosaics
BS 8000-11.2:1990. Workmanship on building sites. Code of practice for wall and floor tilingNatural stone tiles
BS 8000-11:2011. Workmanship on building sitesInternal and external wall and floor tiling. Ceramic and agglomerated stone tiles, natural stone and terrazzo tiles and slabs, and mosaics. Code of practice
BS 8000-12:1989. Workmanship on building sitesCode of practice for decorative wallcoverings and painting
BS 8000-13:1989. Workmanship on building sitesCode of practice for above ground drainage and sanitary appliances
BS 8000-14:1989. Workmanship on building sitesCode of practice for below ground drainage
BS 8000-15:1990. Workmanship on building sitesCode of practice for hot and cold water services (domestic scale)
BS 8000-16:1997+A1:2010. Workmanship on building sitesCode of practice for sealing joints in buildings using sealants
BS 8000-2.1:1990. Workmanship on building sites. Code of practice for concrete workMixing and transporting concrete
BS 8000-2.2:1990. Workmanship on building sites. Code of practice for concrete workSitework with in situ and precast concrete
BS 8000-3:1989. Workmanship on building sitesCode of practice for masonry
BS 8000-3:2001. Workmanship on building sitesCode of practice for masonry
BS 8000-4:1989. Workmanship on building sitesCode of practice for waterproofing
BS 8000-5:1990. Workmanship on building sitesCode of practice for carpentry, joinery and general fixings
BS 8000-6:1990. Workmanship on building sitesCode of practice for slating and tiling of roofs and claddings
BS 8000-6:2013. Workmanship on building sitesCode of practice for slating and tiling of roofs and walls
BS 8000-7:1990. Workmanship on building sitesCode of practice for glazing
BS 8000-8:1989. Workmanship on building sitesCode of practice for plasterboard partitions and dry linings
BS 8000-8:1994. Workmanship on building sitesCode of practice for plasterboard partitions and dry linings
BS 8000-9:1989. Workmanship on building sitesCode of practice for cement/sand floor screeds and concrete floor toppings
BS 8000-9:1999. Workmanship on building sitesCementitious levelling screeds and wearing screeds. Code of practice
BS 8000-9:2003. Workmanship on building sitesCementitious levelling screeds and wearing screeds. Code of practice
BS 8002:1994. Code of practice for earth retaining structures
BS 8004:1986. Code of practice for foundations
BS 8005-0:1987. SewerageIntroduction and guide to data sources and documentation
BS 8005-1:1987. SewerageGuide to new sewerage construction
BS 8005-2:1987. SewerageGuide to pumping stations and pumping mains
BS 8005-3:1989. SewerageGuide to planning and construction of sewers in tunnel
BS 8005-4:1987. SewerageGuide to design and construction of outfalls
BS 8005-5:1990. SewerageGuide to rehabilitation of sewers
BS 8006:1995. Code of practice for strengthened/reinforced soils and other fills
BS 8006-1:2010. Code of practice for strengthened/reinforced soils and other fills
BS 8006-2:2011. Code of practice for strengthened/reinforced soilsSoil nail design
BS 8007:1987. Code of practice for design of concrete structures for retaining aqueous liquids
BS 8008:1996+A1:2008. Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes
BS 801:1984. Specification for composition of lead and lead alloy sheaths of electric cables
BS 8010-1:1989. Code of practice for pipelinesPipelines on land: general
BS 8010-2.1:1987. Code of practice for pipelines. Pipelines on land: design, construction and installationDuctile iron
BS 8010-2.3:1988. Code of practice for pipelines. Pipelines on land: design, construction and installationAsbestos cement
BS 8010-2.4:1988. Code of practice for pipelines. Pipelines on land: design, construction and installationPrestressed concreted pressure pipelines
BS 8010-2.5:1989. Code of practice for pipelines. Pipelines on land: design, construction and installationGlass reinforced thermosetting plastics
BS 8010-2.7:1989. Code of practice for pipelines. Pipelines on land: design, construction and installationPrecast concrete
BS 8010-2.8:1992. Code of practice for pipelines. Pipelines on land: design, construction and installationSteel for oil and gas
BS 8010-3:1993. Code of practice for pipelinesPipelines subsea: design, construction and installation
BS 8020:2002. Tools for live working. Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c.
BS 8020:2011. Tools for live working. Specification for insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c.
BS 806:1975. Specification for ferrous pipes and piping installations for and in connection with land boilers
BS 806:1986. Specification for design and construction of ferrous piping installations for and in connection with land boilers
BS 806:1990. Specification for design and construction of ferrous piping installations for and in connection with land boilers
BS 806:1993. Specification for design and construction of ferrous piping installations for and in connection with land boilers
BS 807:1955. Specification for spot welding electrodes
BS 808:1938. Specification for the modified technique of the Chick-Martin test for disinfectants
BS 808:1986. Method for assessing the efficacy of disinfectants by the modified Chick-Martin test
BS 8081:1989. Code of practice for ground anchorages
BS 809:1985, ISO 707-1985. Methods for sampling of milk and milk products
BS 8093:1991. Code of practice for the use of safety nets, containment nets and sheets on constructional works
BS 810:1966. Specification for sheet linoleum (calendered types) cork carpet and linoleum tiles
BS 8100-1:1986. Lattice towers and masts. Code of practice for loading Code of practice for loading
BS 8100-2:1986. Lattice towers and mastsGuide to the background and use of Part 1 'Code of practice for loading'
BS 8100-3:1999. Lattice towers and mastsCode of practice for strength assessment of members of lattice towers and masts
BS 8100-4:1995. Lattice towers and mastsCode of practice for loading of guyed masts
BS 8102:1990. Code of practice for protection of structures against water from the ground
BS 8102:2009. Code of practice for protection of below ground structures against water from the ground
BS 8103-1:1986. Structural design of low-rise buildingsCode of practice for stability, site investigation, foundations and ground floor slabs for housing
BS 8103-1:1995. Structural design of low-rise buildingsCode of practice for stability, site investigation, foundations and ground floor slabs for housing
BS 8103-1:2011. Structural design of low-rise buildingsCode of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing
BS 8103-2:1996. Structural design of low-rise buildingsCode of practice for masonry walls for housing
BS 8103-2:2005. Structural design of low rise buildingsCode of practice for masonry walls for housing
BS 8103-2:2013. Structural design of low-rise buildingsCode of practice for masonry walls for housing
BS 8103-3:1996. Structural design of low-rise buildingsCode of practice for timber floors and roofs for housing
BS 8103-3:2009. Structural design of low-rise buildingsCode of practice for timber floors and roofs for housing
BS 8103-4:1995. Structural design of low-rise buildingsCode of practice for suspended concrete floors for housing
BS 8104:1992. Code of practice for assessing exposure of walls to wind-driven rain
BS 811:1950. Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
BS 8110-1:1985. Structural use of concreteCode of practice for design and construction
BS 8110-1:1997. Structural use of concreteCode of practice for design and construction
BS 8110-2:1985. Structural use of concreteCode of practice for special circumstances
BS 8110-3:1985. Structural use of concreteDesign charts for singly reinforced beams, doubly reinforced beams and rectangular columns
BS 8118-1:1991. Structural use of aluminiumCode of practice for design
BS 8118-2:1991. Structural use of aluminiumSpecification for materials, workmanship and protection
BS 812-1:1975. Testing aggregatesMethods for determination of particle size and shape
BS 812-100:1990. Testing aggregatesGeneral requirements for apparatus and calibration
BS 812-101:1984. Testing aggregatesGuide to sampling and testing aggregates
BS 812-102:1984. Testing aggregates.Methods for sampling
BS 812-102:1989. Testing aggregatesMethods for sampling
BS 812-103.1:1985. Testing aggregates. Method for determination of particle size distributionSieve tests
BS 812-103.2:1989. Testing aggregates. Method for determination of particle size distributionSedimentation test
BS 812-104:1994. Testing aggregatesMethod for qualitative and quantitative petrographic examination of aggregates
BS 812-105.1:1989. Testing aggregates. Methods for determination of particle shapeFlakiness index
BS 812-105.2:1990. Testing aggregates. Methods for determination of particle shapeElongation index of coarse aggregate
BS 812-105-105.1:1985. Testing aggregates. Methods for determination of particle shape.Flakiness index
BS 812-106:1985. Testing aggregatesMethod for determination of shell content in coarse aggregate
BS 812-109:1990. Testing aggregatesMethods for determination of moisture content
BS 812-110:1990. Testing aggregatesMethods for determination of aggregate crushing value (ACV)
BS 812-111:1990. Testing aggregatesMethods for determination of ten per cent fines value (TFV)
BS 812-112:1990. Testing aggregatesMethod for determination of aggregate impact value (AIV)
BS 812-113:1990. Testing aggregatesMethod for determination of aggregate abrasion value (AAV)
BS 812-114:1989. Testing aggregatesMethod for determination of the polished-stone value
BS 812-117:1988. Testing aggregatesMethod for determination of water-soluble chloride salts
BS 812-118:1988. Testing aggregatesMethods for determination of sulphate content
BS 812-119:1985. Testing aggregatesMethod for determination of acid-soluble material in fine aggregate
BS 812-120:1989. Testing aggregatesMethod for testing and classifying drying shrinkage of aggregates in concrete
BS 812-121:1989. Testing aggregatesMethod for determination of soundness
BS 812-123:1999. Testing aggregatesMethod for determination of alkali-silica reactivity. Concrete prism method
BS 812-124:1989. Testing aggregatesMethod for determination of frost-heave
BS 812-124:2009. Testing aggregatesMethod for determination of frost heave
BS 812-2:1975. Testing aggregatesMethods for determination of physical properties
BS 812-2:1995. Testing aggregatesMethods for determination of density
BS 812-3:1975. Testing aggregates.Methods for determination of mechanical properties
BS 812-4:1976. Testing aggregates.Methods for determination of chemical properties
BS 814:1974. Specification for mild steel and tinplate drums (light duty: fixed ends)
BS 814-1:1987, EN 210:1986. Mild steel and tinplate drums (light duty: fixed ends)Mild steel and tinplate drums (light duty: fixed ends). Specification for steel drums with a total capacity of 216.5 litres
BS 816:1952. Specification. Requirements for electrical accessories
BS 817:1972. Specification for surface plates
BS 817:1983. Specification for surface plates
BS 817:1988. Specification for surface plates
BS 817:2008. Specification for surface plates
BS 8200:1985. Code of practice for design of non-loadbearing external vertical enclosures of buildings
BS 8201:1987. Code of practice for flooring of timber, timber products and wood based panel products
BS 8201:2011. Code of practice for installation of flooring of wood and wood-based panels
BS 8202-1:1987. Coatings for fire protection of building elementsCode of practice for the selection and installation of sprayed mineral coatings
BS 8202-1:1995. Coatings for fire protection of building elementsCode of practice for the selection and installation of sprayed mineral coatings
BS 8202-2:1992. Coatings for fire protection of building elementsCode of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
BS 8203:1987. Code of practice for installation of sheet and tile flooring
BS 8203:1996. Code of practice for installation of resilient floor coverings
BS 8203:2001+A1:2009. Code of practice for installation of resilient floor coverings
BS 8204-1:1987. Screeds, bases and in-situ flooringsCode of practice for concrete bases and screeds to receive in-situ floorings
BS 8204-1:1999. Screeds, bases and in-situ flooringsConcrete bases and cement sand levelling screeds to receive floorings. Code of practice
BS 8204-1:2002. Screeds, bases and in-situ flooringsConcrete bases and cement sand levelling screeds to receive floorings. Code of practice
BS 8204-1:2003+A1:2009. Screeds, bases and in situ flooringsConcrete bases and cementitious levelling screeds to receive floorings. Code of practice
BS 8204-2:1987. Screeds, bases and in-situ flooringsCode of practice for concrete wearing surfaces
BS 8204-2:1999. Screeds, bases and in-situ flooringsConcrete wearing surfaces. Code of practice
BS 8204-2:2002. Screeds, bases and in-situ flooringsConcrete wearing surfaces. Code of practice
BS 8204-2:2003+A2:2011. Screeds, bases and in situ flooringsConcrete wearing surfaces. Code of practice
BS 8204-3:1993. Screeds, bases and in-situ flooringsCode of practice for polymer modified cementitious wearing surfaces
BS 8204-3:2004+A2:2011. Screeds, bases and in situ flooringsPolymer modified cementitious levelling screeds and wearing screeds. Code of practice
BS 8204-4:1993. Screeds, bases and in-situ flooringsCode of practice for terrazzo wearing surfaces
BS 8204-4:2004+A1:2011. Screeds, bases and in situ flooringsCementitious terrazzo wearing surfaces. Code of practice
BS 8204-5:1994. Screeds, bases and in-situ flooringsCode of practice for mastic asphalt underlays and wearing surfaces
BS 8204-5:2004+A1:2011. Screeds, bases and in situ flooringsMastic asphalt underlays and wearing surfaces. Code of practice
BS 8204-6:2001. Screeds, bases and in-situ flooringsSynthetic resin floorings. Code of practice
BS 8204-6:2008+A1:2010. Screeds, bases and in situ flooringsSynthetic resin floorings. Code of practice
BS 8204-7:2003. Screeds, bases and in-situ flooringsPumpable self-smoothing screeds. Code of practice
BS 8205:1985. Code of practice for determining the design of learning spaces where audio-visual equipment will be used
BS 8206-1:1985. Lighting for buildingsCode of practice for artificial lighting
BS 8206-2:1992. Lighting for buildingsCode of practice for daylighting
BS 8206-2:2008. Lighting for buildingsCode of practice for daylighting
BS 8207:1985. Code of practice for energy efficiency in buildings
BS 8208-1:1985. Guide to assessment of suitability of external cavity walls for filling with thermal insulantsExisting traditional cavity construction
BS 8210:1986. Guide to building maintenance management
BS 8210:2012. Guide to facilities maintenance management
BS 8211-1:1988. Energy efficiency in housingCode of practice for energy efficient refurbishment of housing
BS 8212:1988. Code of practice for dry lining and partitioning using gypsum plasterboard
BS 8212:1995. Code of practice for dry lining and partitioning using gypsum plasterboard
BS 8213-1:1991. Windows, doors and rooflightsCode of practice for safety in use and during cleaning of windows and doors (including guidance on cleaning materials and methods)
BS 8213-1:2004. Windows doors and rooflightsDesign for safety in use and during cleaning of windows, including door-height windows and roof windows. Code of practice
BS 8213-4:1990. Windows, doors and rooflightsCode of practice for the installation of replacement windows and doorsets in dwellings
BS 8213-4:2007. Windows, doors and rooflightsCode of practice for the survey and installation of windows and external doorsets
BS 8214:1990. Code of practice for fire door assemblies with non-metallic leaves
BS 8214:2008. Code of practice for fire door assemblies
BS 8215:1991. Code of practice for design and installation of damp-proof courses in masonry construction
BS 8216:1991. Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
BS 8217:1994. Code of practice for built-up felt roofing
BS 8217:2005. Reinforced bitumen membranes for roofing. Code of practice
BS 8218:1998. Code of practice for mastic asphalt roofing
BS 8219:2001+A1:2013. Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice
BS 8220-1:1986. Guide for security of buildings against crimeDwellings
BS 8220-1:2000. Guide for security of buildings against crimeDwellings
BS 8220-2:1987. Guide for security of buildings against crimeOffices and shops
BS 8220-2:1995. Guide for security of buildings against crimeOffices and shops
BS 8220-3:1990. Guide for security of buildings against crimeWarehouses and distribution units
BS 8220-3:2004. Guide for security of buildings against crimeStorage, industrial and distribution premises
BS 8221-1:2000. Code of practice for cleaning and surface repair of buildingsCleaning of natural stones, brick, terracotta and concrete
BS 8221-1:2012. Code of practice for cleaning and surface repair of buildingsCleaning of natural stone, brick, terracotta and concrete
BS 8221-2:2000. Code of practice for cleaning and surface repair of buildingsSurface repair of natural stones, brick and terracotta
BS 822-6:1964. Terminal markings for electrical machinery and apparatusTerminal markings for rotating electrical machinery
BS 822-6:2004. Terminal markings for electrical machinery and apparatusLead colours for rotating electrical machinery
BS 8233:1987. Code of practice for sound insulation and noise reduction for buildings
BS 8233:1999. Sound insulation and noise reduction for buildings. Code of practice
BS 8243:2010. Installation and configuration of intruder and hold-up alarm systems designed to generate confirmed alarm conditions. Code of practice
BS 826:1978. Specification for steel single tier bolted shelving (angle upright type)
BS 8290-1:1991. Suspended ceilingsCode of practice for design
BS 8290-2:1991. Suspended ceilingsSpecification for performance of components and assemblies
BS 8290-3:1991. Suspended ceilingsCode of practice for installation and maintenance
BS 8297:1995. Code of practice for design and installation of non-loadbearing precast concrete cladding
BS 8297:2000. Code of practice for Design and installation of non-loadbearing precast concrete cladding
BS 8298:1989. Code of practice for design and installation of natural stone cladding and lining
BS 8298:1994. Code of practice for design and installation of natural stone cladding and lining
BS 8298-1:2010. Code of practice for the design and installation of natural stone cladding and liningGeneral
BS 8298-2:2010. Code of practice for the design and installation of natural stone cladding and liningTraditional handset external cladding
BS 8298-3:2010. Code of practice for the design and installation of natural stone cladding and liningStone-faced pre-cast concrete cladding systems
BS 8298-4:2010. Code of practice for the design and installation of natural stone cladding and liningRainscreen and stone on metal frame cladding systems
BS 8300:2001. Design of buildings and their approaches to meet the needs of disabled people. Code of practice
BS 8300:2009+A1:2010. Design of buildings and their approaches to meet the needs of disabled people. Code of practice
BS 8301:1985. Code of practice for building drainage
BS 8303:1986. Code of practice for installation of domestic heating and cooking appliances burning solid mineral fuels
BS 8303-1:1994. Installation of domestic heating and cooking appliances burning solid mineral fuelsInstallation of domestic heating and cooking appliances burning solid mineral fuels. Specification for the design of installations
BS 8303-2:1994. Installation of domestic heating and cooking appliances burning solid mineral fuelsInstallation of domestic heating and cooking appliances buring solid mineral fuels. Specification for installing and commissioning on site
BS 8303-3:1994. Installation of domestic heating and cooking appliances burning solid mineral fuelsRecommendations for design and on site installation
BS 8313:1989. Code of practice for accommodation of building services in ducts
BS 8313:1997. Code of practice for accommodation of building services in ducts
BS 833:1970. Specification for radio interference limits and measurements for the electrical ignition systems of internal combustion engines
BS 835:1973. Specification for asbestos-cement flue pipes and fittings, heavy quality
BS 838:1961. Methods of test for toxicity of wood preservatives to fungi
BS 84:1956. Specification for parallel screw threads of Whitworth form
BS 84:2007. Parallel screw threads of Whitworth form. Requirements
BS 8401:2003. Health informatics standards.Status as of July 2001. Guide
BS 8403:2002. Specification for aquatic spineboards for recovering casualties in controlled aquatic conditions
BS 8404:2001. Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for pharmaceutical products
BS 8405:2003+A1:2009. Personal protective equipment against falls from a height. Descender devices. Single-hand operated descender devices for self or assisted rescue
BS 8406:2003. Event stewarding and crowd safety services. Code of practice
BS 8406:2009. Event stewarding and crowd safety. Code of practice
BS 8407:2002. Specification for mechanical and spliced joints in conveyor belting for use underground
BS 8408:2005. Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification
BS 8409:2002. Soft indoor play areas. Code of practice
BS 8409:2009. Fully enclosed play facilities. Code of practice
BS 841:1966. Specification for lamp-caps and lampholders for architectural lamps
BS 8410:2007. Code of practice for lightweight temporary cladding for weather protection and containment on construction works
BS 8411:2007. Code of practice for safety nets on construction sites and other works
BS 8412:2004. Equipment for crop protection. Performance requirements for application systems used to make spatially variable applications to field crops. Specification
BS 8414-1:2002. Fire performance of external cladding systemsTest methods for non-loadbearing external cladding systems applied to the face of a building
BS 8414-2:2005. Fire performance of external cladding systemsTest method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame
BS 8415:2005+A2:2012. Monuments within burial grounds and memorial sites. Specification
BS 8416:2002. Specification for hole-saws
BS 8417:2003. Preservation of timber. Recommendations
BS 8417:2011. Preservation of wood. Code of practice
BS 8418:2003. Installation and remote monitoring of detector activated CCTV systems. Code of practice
BS 8418:2010. Installation and remote monitoring of detector-activated CCTV systems. Code of practice
BS 8419-1:2005. Interoperability between metadata systems used for learning, education and trainingCode of practice for the development of application profiles
BS 8419-2:2005. Interoperability between metadata systems used for learning, education and trainingCode of practice for the development of interoperability between application profiles
BS 842:1965. Specification for a.c. voltage-operated earth-leakage circuit breakers
BS 8420:2003. Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges
BS 8421-1:2003. Guide to health informatics. Results of healthcare service procedures. Delivery to end-usersGeneral guidance and recommendations
BS 8422:2003. Force measurement. Strain gauge load cell systems. Calibration method
BS 8423:2002. Fireguards for fires and heating appliances for domestic use. Specification
BS 8423:2010. Fireguards for fires and heating appliances for domestic use. Specification
BS 8424:2004. Building hardware. Pull handles. Requirements and test methods
BS 8425:2003. Code of practice for installation of laminate floor coverings
BS 8426:2003. A code of practice for e-support in e-learning systems
BS 8427:2004. Jug water filter systems. Specification
BS 8428:2004. Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective suits with liquid-tight connections between different parts of the clothing for emergency teams (type 3-ET equipment)
BS 843:1976. Specification for thermal-storage electric water heaters (constructional and water requirements)
BS 8430:2005. Terminology work. Fundamentals made simple
BS 8431:2010. Electrical static meters for secondary metering and sub-metering. Specification
BS 8432:2005. Spinal orthoses. Guide to design
BS 8433:2004. Microwavable personal warmers. Specification
BS 8434-1:2003. Methods of test for assessment of the fire integrity of electric cablesTest for unprotected small cables for use in emergency circuits. BS EN 50200 with addition of water spray
BS 8434-2:2003+A2:2009. Methods of test for assessment of the fire integrity of electric cablesTest for unprotected small cables for use in emergency circuits. BS EN 50200 with a 930° flame and with water spray
BS 8435:2005. Small craft. Reserve flotation. Boats up to six metres length of hull
BS 8436:2004. Electric cables. 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
BS 8436:2011. Electric cables. Specification for 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
BS 8437:2005+A1:2012. Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace
BS 8438:2004+A1:2010. Troughed belt conveyors. Specification
BS 8439:2005. Continuous handling equipment and systems. Guide to properties of powders and bulk materials
BS 8440-1:2005. Health informatics. Medical digital imaging. Profiles formatGeneral principles
BS 8440-2:2005. Health informatics. Medical digital imaging. Profiles formatParticular requirements for metadata profiles
BS 8441-2:2006. Health informatics. Medical digital imaging profiles“M-IHE6-4.8MIS-CT” CT images stored
BS 8442:2006. Miscellaneous road traffic signs and devices. Requirements and test methods
BS 8443:2005. Specification for establishing the suitability of special purpose concrete admixtures
BS 8444-3:1996, IEC 60300-3-9:1995. Risk managementGuide to risk analysis of technological systems
BS 8445:2012. Bath and shower mats. Testing. Assessment of slip resistance properties
BS 8446:2005. Specification for the installation and maintenance of open-flued, non-domestic gas-fired laundry appliances
BS 8447:2005. Anaesthetic and respiratory equipment. Hook-on fittings for the attachment of vaporizers to an anaesthetic gas delivery device
BS 8449:2005. Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures
BS 845:1972. Acceptance tests for industrial type boilers and steam generators
BS 8450:2006. Code of practice for installation of electrical and electronic equipment in ships
BS 845-1:1987. Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluidsConcise procedure
BS 8451:2004. Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
BS 845-2:1987. Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids.Comprehensive procedure
BS 8452:2005. Use of clamp-on (externally mounted) transit time metering techniques for liquid applications. Guide
BS 8452:2010. Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide
BS 8453:2011. Compliance framework for regulated financial services firms. Specification
BS 8454:2006. Code of practice for the delivery of training and education for work at height and rescue
BS 8456:2005. Code of practice for design and installation of directional sounder evacuation systems
BS 8459:2005. Determination of extractable matter in textiles. Method
BS 846:1985. Specification for burettes
BS 8460:2005. Safe use of MEWPsCode of practice
BS 8461:2005+A1:2009. Football goals. Code of practice for their procurement, installation, maintenance, storage and inspection
BS 8462:2005+A2:2012. Goals for youth football, futsal, mini-soccer and small-sided football. Specification
BS 8463:2005+A1:2008. Specification for customer billing practice
BS 8465:2010. Hydraulic fluid power. Monitoring the level of particulate contamination. Comparison membrane technique
BS 8466:2006. Hats. Protection against solar UVR. Method of test and performance requirements
BS 8467:2006. Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods
BS 8468-1:2006. Respiratory equipment for use against chemical, biological, radiological and nuclear (CBRN) agentsPositive pressure, self-contained, open-circuit breathing apparatus. Specification
BS 8468-2:2006. Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agentsNegative pressure, air purifying devices with full face mask. Specification
BS 8468-3.1:2009. Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agentsSelf-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Specification
BS 8468-3.2:2009. Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Air-purifying devices incorporating a hood for escape. Specification
BS 8468-4:2008. Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agentsPowered air-purifying respirators. Specification
BS 8468-5:2011. Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agentsDual-mode apparatus. Specification
BS 8468-6.1:2011. Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agentsPositive-pressure compressed airline equipment. Specification
BS 8468-6.2:2011. Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agentsConstant flow compressed airline equipment. Specification
BS 8468-7:2012. Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agentsClosed-circuit breathing apparatus. Specification
BS 8469:2007. Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods
BS 8470:2006. Secure destruction of confidential material. Code of practice
BS 8471:2007. Guide to particle sizing methods
BS 8472:2011. Methods for the assessment of the oxo-biodegradation of plastics and of the phyto-toxicity of the residues in controlled laboratory conditions
BS 8473:2006+A1:2008. Intruder and hold-up alarm systems. Management of false alarms. Code of practice
BS 8474:2006. Furniture. Chairs with electrically operated support surfaces. Requirements
BS 8474:2013. Furniture. Chairs with electrically operated support surfaces. Requirements
BS 8475:2006. Instrumental colour measurement of textiles. Method
BS 8476:2007. Code of practice for the safe use of concrete pumps
BS 8477:2007. Code of practice for customer service
BS 8478:2006. Respiratory protective devices. Breathing gases for diving and hyperbaric applications
BS 8478:2011. Respiratory protective devices. Breathing gases for diving and hyperbaric applications. Requirements and test methods
BS 8479:2008. Textiles. Method for determination of the propensity of fabrics to snagging. Rotating chamber method
BS 8480:2006. Medical devices. Chairs with electrically operated support surfaces. Requirements
BS 848-1:1980. Fans for general purposesMethods of testing performance
BS 848-1:1997, ISO 5801:1997. Fans for general purposesPerformance testing using standardized airways
BS 8481:2006. Design, preparation and application of internal gypsum, cement, cement and lime plastering systems. Specification
BS 848-2.6:2000, ISO 10302:1996. Fans for general purposes. Methods of noise testingAirborne noise emitted by small air-moving devices
BS 848-2:1966. Methods of testing fans.Fan noise testing
BS 848-2:1985. Fans for general purposesMethods of noise testing
BS 8484:2009. Code of practice for the provision of lone worker device (LWD) services
BS 8484:2011. Provision of lone worker device (LWD) services. Code of practice
BS 848-5:1986. Fans for general purposesGuide for mechanical and electrical safety
BS 8485:2007. Code of practice for the characterization and remediation from ground gas in affected developments
BS 848-6:1989. Fans for general purposesMethod of measurement of fan vibration
BS 8486-1:2007+A1:2011. Examination and test of new lifts before putting into service. Specification for means of determining compliance with BS EN 81Electric lifts
BS 8486-2:2007+A1:2011. Examination and test of new lifts before putting into service. Specification for means of determining compliance with BS EN 81Hydraulic lifts
BS 8487:2007+A1:2013. The design and construction of gas boosters used in association with combustion equipment. Specification
BS 8488:2009+A1:2010. Prefabricated wiring systems intended for permanent connection in fixed installations. Specification
BS 848-9:2006, ISO 13348:2006. Fans for general purposesTolerances, methods of conversion and technical data presentation
BS 848-9:2007, ISO 13348:2007. Fans for general purposes. Tolerances, methods of conversion and technical data presentation
BS 849:1939. Code of practice for plain sheet zinc roofing
BS 8490:2007. Guide to siphonic roof drainage systems
BS 8491:2008. Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems
BS 8492:2009. Telecommunications equipment and telecommunications cabling. Code of practice for fire performance and protection
BS 8493:2008+A1:2010. Light reflectance value (LRV) of a surface. Method of test
BS 8494:2007. Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air. Requirements and test methods
BS 8495:2007. Code of practice for digital CCTV recording systems for the purpose of image export to be used as evidence
BS 8496:2007. Water quality. Enumeration of micro-organisms in water samples. Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement
BS 8497-1:2008. Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applicationsSpecification for products
BS 8497-2:2008. Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applicationsGuidance on use
BS 8498:2008. British Standards for screw threads and screw gauges. Introduction and guidance
BS 8499:2009. Specification for domestic gas meter boxes and meter bracket
BS 8500-1:2002. Concrete. Complementary British Standard to BS EN 206-1Method of specifying and guidance for the specifier
BS 8500-1:2006+A1:2012. Concrete. Complementary British Standard to BS EN 206-1Method of specifying and guidance for the specifier
BS 8500-2:2002. Concrete. Complementary British Standard to BS EN 206-1Specification for constituent materials and concrete
BS 8500-2:2006+A1:2012. Concrete. Complementary British Standard to BS EN 206-1Specification for constituent materials and concrete
BS 8501:2002. Graphical symbols and signs. Public information symbols
BS 8502:2003. Graphical symbols and signs. Creation and design of public information symbols. Requirements
BS 8504-1:2006. Beach safety flagsColour, shape and meaning
BS 8504-2:2006. Beach safety flagsMaterials. Requirements and test methods
BS 8507-1:2008. Code of practice for close protection servicesServices within the United Kingdom
BS 8507-2:2009. Code of practice for close protection servicesServices outside the United Kingdom
BS 8509:2008+A1:2011. Childrens beds for domestic use. Safety requirements and test methods
BS 8510:2009. Child use and care articles. Safety of children's sleep bags. Safety requirements and test methods
BS 8511:2010. Code of practice for the installation of solid fuel heating and cooking appliances in small craft
BS 8512:2008. Electric cables. Code of practice for the storage, handling, installation and disposal of cables on wooden drums
BS 8513:2009. Personal fall protection equipment. Twin-legged energy-absorbing lanyards. Specification
BS 8515:2009. Rainwater harvesting systems. Code of practice
BS 8517-1:2009. Security dogsCode of practice for the use of general purpose security dogs
BS 8517-2:2010. Security dogsCode of practice for the use of detection dogs
BS 8519:2010. Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications. Code of practice
BS 852:1939. Specification for toolmakers' straightedges
BS 8520-1:2009. Equipment used in the controlled removal of asbestos-containing materialsControlled wetting equipment. Specification
BS 8520-2:2009. Equipment used in the controlled removal of asbestos-containing materialsNegative pressure units. Specification
BS 8520-3:2009. Equipment used in the controlled removal of asbestos-containing materialsOperation, cleaning and maintenance of class H vacuum cleaners. Code of practice
BS 8521:2009. Specification for dual-tone multi-frequency (DTMF) signalling protocol for social alarm systems
BS 8522:2009. Furniture removal activities. Commercial moving services
BS 8523:2011. Management and operation of warden schemes. Code of practice
BS 8524-1:2013. Active fire curtain barrier assembliesSpecification
BS 8524-2:2013. Active fire curtain barrier assembliesCode of practice for application, installation and maintenance
BS 8525-1:2010. Greywater systemsCode of practice
BS 8525-2:2011. Greywater systemsDomestic greywater treatment equipment. Requirements and test methods
BS 8529:2010. Composite doorsets. Domestic external doorsets. Specification
BS 853:1981. Specification for calorifiers and storage vessels for central heating and hot water supply
BS 8530:2010. Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification
BS 853-1:1990+A3:2011. Specification for vessels for use in heating systemsCalorifiers and storage vessels for central heating and hot water supply
BS 853-2:1996. Specification for vessels for use in heating systemsTubular heat exchangers and storage vessels for building and industrial services
BS 8532:2011. Terminal units for high flow anaesthetic gas scavenging systems. Specification for probes and type-specific connection points
BS 8533:2011. Assessing and managing flood risk in development. Code of practice
BS 8534:2011. Construction procurement policies, strategies and procedures. Code of practice
BS 8535:2011. Railway applications. Wheelsets and bogies. Powered and non-powered axles with inboard bearings. Design method
BS 8536:2010. Facility management briefing. Code of practice
BS 8537:2010. Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes
BS 8538:2011. Specification for the provision of services relating to the commercialization of intellectual property rights
BS 8539:2012. Code of practice for the selection and installation of post-installed anchors in concrete and masonry
BS 8541-1:2012. Library objects for architecture, engineering and constructionIdentification and classification. Code of practice
BS 8541-2:2011 (CD-ROM)
BS 8541-2:2011 (CD-ROM). Library objects for architecture, engineering and constructionRecommended 2D symbols of building elements for use in building information modelling
BS 8541-2:2011. Library objects for architecture, engineering and constructionRecommended 2D symbols of building elements for use in building information modelling
BS 8541-3:2012. Library objects for architecture, engineering and constructionShape and measurement. Code of practice
BS 8541-4:2012. Library objects for architecture, engineering and constructionAttributes for specification and assessment. Code of practice
BS 8542:2011. Calculating domestic water consumption in non-domestic buildings. Code of practice
BS 8544:2013. Guide for life cycle costing of maintenance during the in use phases of buildings
BS 8549:2006. Security consultancy. Code of practice
BS 855:1976. Specification. Welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)
BS 855:1990. Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)
BS 8550:2010. Guide for the auditing of water quality sampling
BS 8551:2011. Provision and management of temporary water supplies and distribution networks (not including provisions for statutory emergencies). Code of practice
BS 8552:2012. Sampling and monitoring of water from building services closed systems. Code of practice
BS 8555:2003. Environmental management systems. Guide to the phased implementation of an environmental management system including the use of environmental performance evaluation
BS 8558:2011. Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806
BS 856:1969. Specification for wing nuts
BS 8560:2012. Code of practice for the design of buildings incorporating safe work at height
BS 8562:2011. Gas cylinders. In situ, non-destructive examination and testing of refillable seamless steel tubes of water capacity between 150 L and 3000 L, used for compressed gases Specification
BS 8564:2011. Furniture removal activities. Overseas moving services. Specification
BS 8567:2012. Specification for outdoor electricity meter cupboards
BS 8568:2013. Cleanroom energy. Code of practice for improving energy efficiency in cleanrooms and clean air devices
BS 857:1967. Specification for safety glass for land transport
BS 8572:2011. Procurement of facility-related services. Guide
BS 8573:2012. Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire
BS 8576:2013. Guidance on investigations for ground gas. Permanent gases and Volatile Organic Compounds (VOCs)
BS 8577:2012 + BS ISO 22222:2005
BS 8577:2012 + BS ISO 22222:2005. Financial Advice and Planning Package (BS 8577:2012 + BS ISO 22222:2005)
BS 8577:2012. Framework for the provision of financial advice and planning services. Specification
BS 8580:2010. Water quality. Risk assessments for Legionella control. Code of practice
BS 8581-1:2012. Exchanging course related informationCourse advertising profile. Specification
BS 8581-2:2012. Exchanging course related informationCourse advertising profile. Code of practice
BS 8587:2012. Guide to facility information management
BS 8595:2013. Code of practice for the selection of water reuse systems
BS 8599-1:2011. Workplace first aid kitsSpecification for the contents of workplace first aid kits
BS 860:1967. Tables for comparison of hardness scales
BS 8600:1999. Complaints management systems. Guide to design and implementation
BS 8602:2013. Method for assessment of fire integrity of cast resin busbar trunking systems for the safety critical power distribution to life safety and fire fighting systems
BS 8603:2013. Code of practice for wheelchair passport schemes
BS 8621:2004. Thief resistant lock assembly. Keyless egress
BS 8621:2007+A2:2012. Thief resistant lock assembly. Keyless egress
BS 864-2:1983. Capillary and compression tube fittings of copper and copper alloySpecification for capillary and compression fittings for copper tubes
BS 864-3:1975. Capillary and compression tube fittings of copper and copper alloyCompression fittings for polyethylene pipes
BS 864-5:1990. Capillary and compression tube fittings of copper and copper alloySpecification for compression fittings for polyethylene pipes with outside diameters to BS 5556
BS 8660-1:2011. Gas-fired micro-cogeneration appliances of rated thermal input not exceeding 70 kW netSpecification for selection, installation, inspection, commissioning, servicing and maintenance of Stirling engine micro-cogeneration appliances
BS 8666:2000. Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 8666:2005. Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification
BS 869:1978. Specification for toolmakers' flats and high precision surface plates
BS 870:1950. Specification for external micrometers
BS 870:2008. Specification for external micrometers
BS 871:1981. Specification for abrasive papers and cloths
BS 8723-1:2005. Structured vocabularies for information retrieval. GuideDefinitions, symbols and abbreviations
BS 8723-2:2005. Structured vocabularies for information retrieval. GuideThesauri
BS 8723-3:2007. Structured vocabularies for information retrieval. GuideVocabularies other than thesauri
BS 8723-4:2007. Structured vocabularies for information retrieval. GuideInteroperability between vocabularies
BS 8726-1:2002. Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and designCompression springs
BS 8726-2:2002. Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and designTorsion springs
BS 873-1:1983. Road traffic signs and internally illuminated bollardsMethods of test
BS 873-2:1984. Road traffic signs and internally illuminated bollardsSpecification for miscellaneous signs
BS 873-3:1980. Road traffic signs and internally illuminated bollardsSpecification for internally illuminated bollards
BS 873-4:1973. Specification for the construction of road traffic signs and internally illuminated bollards.Road studs
BS 873-4:1987. Road traffic signs and internally illuminated bollardsSpecification for road studs
BS 873-5:1983. Road traffic signs and internally illuminated bollardsSpecification for internally illuminated signs and external lighting luminaires
BS 873-6:1983. Road traffic signs and internally illuminated bollardsSpecification for retroreflective and non-retroreflective signs
BS 873-7:1984. Road traffic signs and internally illuminated bollardsSpecification for posts and fittings
BS 873-8:1985. Road traffic signs and internally illuminated bollardsSpecification for traffic cones and cylinders
BS 874:1973. Methods for determining thermal insulating properties with definitions of thermal insulating terms
BS 874-1:1986. Methods for determining thermal insulating propertiesIntroduction, definitions and principles of measurement
BS 874-2.1:1986. Methods for determining thermal insulating properties. Tests for thermal conductivity and related propertiesGuarded hot-plate method
BS 874-2.2:1988. Methods for determining thermal insulating properties. Tests for thermal conductivity and related propertiesUnguarded hot-plate method
BS 874-3.1:1987. Methods for determining thermal insulating properties. Tests for thermal transmittance and conductanceGuarded hot-box method
BS 874-3.2:1990. Methods for determining thermal insulating properties. Tests for thermal transmittance and conductanceCalibrated hot-box method
BS 8747:2007. Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification
BS 876:1981. Specification for hand hammers
BS 876:1995. Specification for hand hammers
BS 8766:2004. Names and identifiers of individuals and groups. Data structure for interoperability. Specification
BS 877-2:1973. Specification for foamed or expanded blastfurnace slag lightweight aggregate for concrete.Metric units
BS 879:1965. Specification for water well casing
BS 879-1:1985. Water well casing.Specification for steel tubes for casing
BS 879-2:1988. Water well casing.Specification for thermoplastics tubes for casing and slotted casing
BS 880:1950. Specification. Musical pitch
BS 8800 HEALTH SAFETY ELECTRONIC BOOK. Occupational health and safety management systems. Guide
BS 8800:1996. Guide to occupational health and safety management systems
BS 8800:2004. Occupational health and safety management systems. Guide
BS 881 & 589:1974. Nomenclature of commercial timbers, including sources of supply
BS 88-1:1975. Specification for cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.General requirements
BS 88-2.2:1988. Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application)Additional requirements for fuses with fuse-links for bolted connections
BS 88-2:1975. Specification for cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.Supplementary requirements for fuses of standardized dimensions and performance for industrial purposes
BS 882:1983. Specification for aggregates from natural sources for concrete
BS 882:1992. Specification for aggregates from natural sources for concrete
BS 88-2:2007. Low-voltage fusesSupplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I
BS 88-3:2007. Low-voltage fusesSupplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications). Examples of standardized systems of fuses A to F
BS 88-4:1976. Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.Supplementary requirements for fuse links for the protection of semiconductor devices
BS 8848:2007+A1:2009. Specification for the provision of visits, fieldwork, expeditions, and adventurous activities, outside the United Kingdom
BS 88-5:1980. Specification for cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.Supplementary requirements for fuse links of standardized dimensions and performance for use in a.c. electricity supply networks
BS 88-5:1988. Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.Specification of supplementary requirements for fuse-links for use in a.c. electricity supply networks
BS 8855-2:2000. Soil analysisMethod for determination of coal tar-derived phenolic compounds
BS 88-6:1988. Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c.Specification of supplementary requirements for fuses of compact dimensions for use in 240/415 V a.c. industrial and commercial electrical installations
BS 887:1982. Specification for precision vernier callipers
BS 887:2008. Precision vernier callipers. Requirements and test methods
BS 8877:2011. Online recruitment. Code of practice
BS 8878:2010. Web accessibility. Code of practice
BS 888:1950. Specification for slip (or block) gauges and their accessories
BS 8887-1:2006. Design for manufacture, assembly, disassembly and end-of-life processing (MADE)General concepts, process and requirements
BS 8887-2:2009. Design for manufacture, assembly, disassembly and end-of-life processing (MADE)Terms and definitions
BS 8887-211:2012. Design for manufacture, assembly, disassembly and end-of-life processing (MADE)Specification for reworking and remarketing of computing hardware
BS 8887-220:2010. Design for manufacture, assembly, disassembly and end-of-life processing (MADE)The process of remanufacture. Specification
BS 8887-240:2011. Design for manufacture, assembly, disassembly and end-of-life processing (MADE)Reconditioning
BS 8888:2000. Technical product documentation (TPD). Specification for defining, specifying and graphically representing products
BS 8888:2002 CD-ROM
BS 8888:2002 CD-ROM. Technical product documentation (TPD). Specification for defining, specifying and graphically representing products
BS 8888:2002. Technical product documentation (TPD). Specification for defining, specifying and graphically representing products
BS 8888:2004. Technical product specification (TPS). Specification
BS 8888:2006. Technical product specification (TPS). Specification
BS 8888:2008. Technical product specification. Specification
BS 8888:2011. Technical product documentation and specification
BS 889:1965. Specification for flameproof electric lighting fittings
BS 8895-1:2013. Designing for material efficiency in building projectsCode of practice for Strategic Definition and Preparation and Brief
BS 89:1977, IEC 60051:1973. Specification for direct acting indicating electrical measuring instruments and their accessories
BS 890:1972. Specification for building limes
BS 890:1995. Specification for building limes
BS 8900:2006. Guidance for managing sustainable development
BS 8900-1:2013. Managing sustainable development of organizationsGuide
BS 8900-2:2013. Managing sustainable development of organizationsFramework for assessment against BS 8900-1. Specification
BS 8901:2007. Specification for a sustainable event management system with guidance for use
BS 8901:2009. Specification for a sustainability management system for events
BS 8902:2009. Responsible sourcing sector certification schemes for construction products. Specification
BS 8903:2010. Principles and framework for procuring sustainably. Guide
BS 8904:2011. Guidance for community sustainable development
BS 8905:2011. Framework for the assessment of the sustainable use of materials. Guidance
BS 8909:2011. Specification for a sustainability management system for film
BS 891:1989. Methods for hardness test (Rockwell method) and for verification of hardness testing machines (Rockwell method)
BS 89-1:1990, EN 60051-1:1989,IEC 60051-1:1984. Direct acting indicating analogue electrical measuring instruments and their accessoriesSpecification for definitions and general requirements common to all Parts
BS 891-1:1962. Method for Rockwell hardness test.Testing of metals
BS 891-2:1964. Method for Rockwell hardness test.Verification of the testing machine
BS 892:1967. Glossary of highway engineering terms
BS 89-2:1990, EN 60051-2:1989,IEC 60051-2:1984. Direct acting indicating analogue electrical measuring instruments and their accessoriesSpecification for special requirements for ammeters and voltmeters
BS 893:1978. Method for the measurement of the concentration of particulate material in ducts carrying gases
BS 89-3:1990, EN 60051-3:1989,IEC 60051-3:1984. Direct acting indicating analogue electrical measuring instruments and their accessoriesSpecification for special requirements for wattmeters and varmeters
BS 894:1956. Specification for Ubbelohde apparatus for flow and drop points
BS 89-4:1990, EN 60051-4:1989,IEC 60051-4:1984. Direct acting indicating analogue electrical measuring instruments and their accessoriesSpecification for special requirements for frequency meters
BS 89-5:1990, EN 60051-5:1989,IEC 60051-5:1985. Direct acting indicating analogue electrical measuring instruments and their accessoriesSpecification for special requirements for phase meters, power factor meters and synchroscopes
BS 89-6:1990, EN 60051-6:1989,IEC 60051-6:1984. Direct acting indicating analogue electrical measuring instruments and their accessoriesSpecification for special requirements for ohmmeters (impedance meters) and conductance meters
BS 896-1:1960. Specification for stretchers and stretcher carriersDimensions
BS 896-2:1965. Specification for stretchers and stretcher carriersPerformance
BS 89-7:1990, EN 60051-7:1989,IEC 60051-7:1984. Direct acting indicating analogue electrical measuring instruments and their accessoriesSpecification for special requirements for multi-function instruments
BS 89-8:1990, EN 60051-8:1989,IEC 60051-8:1984. Direct acting indicating analogue electrical measuring instruments and their accessoriesSpecification for special requirements for accessories
BS 89-9:1990, EN 60051-9:1989,IEC 60051-9:1988. Direct acting indicating analogue electrical measuring instruments and their accessoriesRecommended test methods
BS 8F 1:1975. Specification for 140 g linen fabric and serrated edge strip
BS 8F 35:2002. Braided linen (flax) lacing cord for aerospace purposes
BS 90:1975. Specification for direct-acting electrical recording instruments and their accessories
BS 9000-1:1981. General requirements for a system for electronic components of assessed quality.Specification of basic rules and procedures
BS 9000-1:1989. General requirements for a system for electronic components of assessed qualitySpecification of general procedures
BS 9000-2:1983. General requirements for a system for electronic components of assessed quality.Specification for national implementation of CECC basic rules and rules of procedure
BS 9000-2:1991. General requirements for a system for electronic components of assessed qualitySpecification for the national implementation of the CECC system
BS 9000-3:1987. General requirements for a system for electronic components of assessed quality.Specification for national implementation of IECQ basic rules and rules of procedure
BS 9000-3:1991. General requirements for a system for electronic components of assessed qualitySpecification for the national implementation of the IECQ system
BS 9000-3:1996. General requirements for a system for electronic components of assessed qualitySpecification for the national implementation of the IECQ system
BS 9000-4:1989. General requirements for a system for electronic components of assessed qualitySpecification of procedures for the approval of an organization
BS 9000-4:1991. General requirements for a system for electronic components of assessed qualitySpecification of procedures for the approval of an organization
BS 9000-5:1989. General requirements for a system for electronic components of assessed qualitySpecification of qualification approval and conformance testing procedures
BS 9000-6:1989. General requirements for a system for electronic components of assessed qualitySpecification of capability approval procedures
BS 9000-7:1989. General requirements for a system for electronic components of assessed qualitySpecification of lot formation, release procedures and certified test records
BS 9000-8-8.1:1989. General requirements for a system for electronic components of assessed quality. Drafting requirements.Generic, sectional and blank detail specifications produced under qualification approval
BS 9000-8-8.2:1989. General requirements for a system for electronic components of assessed quality. Drafting requirements.Generic and sectional specifications produced under capability approval
BS 9003:1977. Requirements for the manufacture of electronic components of assessed quality intended for long life applications
BS 9005:1985. Specification for general procedures to be followed for the capability approval of electronic components covered by BS 9000- 1
BS 9010:1971. Specification for transmitter tubes of assessed quality: generic data and methods of test
BS 9011:1970. Rules for the preparation of detail specifications for transmitter tubes of assessed quality (up to 1 kW anode dissipation)
BS 9014:1974. Specification for pulse modulator hydrogen thyratron tubes of assessed quality: generic data and methods of test
BS 9015:1970. Specification for counter and indicator tubes of assessed quality: generic data and methods of test
BS 9016:1970. Rules for the preparation of detail specifications for indicator tubes of assessed quality
BS 9018:1973. Rules for the preparation of detail specifications for pulse modulator hydrogen thyratrons of assessed quality
BS 9020:1970. Specification for corona stabilizer tubes of assessed quality: generic data and methods of test
BS 9021:1970. Rules for the preparation of detail specifications for corona stabilizer tubes of assessed quality
BS 9023:1978. Specification for flash tubes of assessed quality: generic data and methods of test
BS 9024:1978. Rules for the preparation of detail specifications for flash tubes of assessed quality
BS 9025:1970. Specification for travelling-wave amplifier tubes of assessed quality: generic data and methods of test
BS 9026:1970. Rules for the preparation of detail specifications for low noise signal amplifier tubes of assessed quality with integral permanent magnet focusing
BS 9027:1971. Rules for the preparation of detail specifications for forward travelling-wave power tubes of assessed quality
BS 9028:1978. Rules for the preparation of detail specifications for travelling wave tubes of assessd quality: basic assessment level
BS 9030:1971. Specification for magnetrons of assessed quality: generic data and methods of test
BS 903-0:1990. Physical testing of rubberIntroduction
BS 903-0:2003. Physical testing of rubberGeneral
BS 903-0:2012. Physical testing of rubberGeneral
BS 9031:1971. Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality
BS 903-1:1995. Physical testing of rubberGuide to the selection and use of methods of test for rubber
BS 9032:1975. Rules for the preparation of detail specifications for pulsed magnetrons (excluding frequency-agile magnetrons) of assessed quality. Basic assessment level
BS 903-2:1997. Physical testing of rubberGuide to the application of statistics to rubber testing
BS 903-3:2003. Physical testing of rubberAcquisition and presentation of comparable single-point data
BS 903-4:2003. Physical testing of rubberAcquisition and presentation of comparable multi-point data
BS 9035:1979. Specification for klystrons of assessed quality: generic data and methods of test
BS 903-5:2004. Physical testing of rubberGuide to the application of rubber testing to finite element analysis
BS 9036:1979. Blank detail specification for amplifier klystrons of assessed quality
BS 9037:1979. Blank detail specification for oscillator klystrons of assessed quality
BS 903-A1:1980, ISO 2781-1975. Physical testing of rubberDetermination of density
BS 903-A1:1996, ISO 2781:1988. Physical testing of rubberDetermination of density
BS 903-A10:1984, ISO 132-1983. Physical testing of rubberDetermination of flex cracking (De Mattia)
BS 903-A11:1985, ISO 133-1983. Physical testing of rubberDetermination of crack growth (De Mattia)
BS 903-A12:1975. Physical testing of rubberDetermination of the adhesion strength of vulcanized rubbers to fabrics (ply adhesion)
BS 903-A12:1995, ISO 36:1993. Physical testing of rubberMethod for determination of the adhesion strength to textile fabric
BS 903-A13:1983, ISO 1432-1982. Methods of testing vulcanized rubber.Determination of stiffness at low temperature (Gehman test)
BS 903-A13:1990, ISO 1432:1988. Physical testing of rubberMethod for determination of stiffness at low temperature (Gehman test)
BS 903-A14:1970. Methods of testing vulcanized rubber.Determination of modulus in shear of rubber (bonded quadruple shear test piece)
BS 903-A14:1992. Physical testing of rubberMethod for determination of modulus in shear or adhesion to rigid plates. Quadruple shear method
BS 903-A15:1982. Methods of testing vulcanized rubber.Determination of creep
BS 903-A15:1990, ISO 8013:1988. Physical testing of rubberMethod for determination of creep in compression or shear
BS 903-A16:1971. Methods of testing vulcanized rubber.The resistance of vulcanized rubber to liquids
BS 903-A16:1987, ISO 1817-1985. Physical testing of rubberDetermination of the effect of liquids
BS 903-A17:1973. Physical testing of rubberDetermination of the permeability of rubber to gases (constant volume method)
BS 903-A18:1973. Physical testing of rubberDetermination of equilibrium water vapour absorption
BS 903-A19:1975. Methods of testing vulcanized rubber.Heat resistance and accelerated air ageing tests
BS 903-A19:1986, ISO 188-1982. Physical testing of rubberHeat resistance and accelerated ageing tests
BS 903-A2:1971. Methods of testing vulcanized rubber.Determination of tensile stress-strain properties
BS 903-A2:1989. Physical testing of rubberDetermination of tensile stress-strain properties
BS 903-A2:1995, ISO 37:1994. Physical testing of rubberMethod for determination of tensile stress-strain properties
BS 903-A21.1:1997, ISO 813:1997. Physical testing of rubber. Determination of rubber to metal bond strengthAdhesion to rigid substrates. 90° peel method
BS 903-A21.2:1997, ISO 814:1996. Physical testing of rubber. Determination of rubber to metal bond strengthTwo plate method
BS 903-A21:1974. Methods of testing vulcanized rubber.Determination of rubber to metal bond strength
BS 903-A21:1989. Physical testing of rubberDetermination of rubber to metal bond strength
BS 903-A24:1976. Methods of testing vulcanized rubber.Measurement of dynamic moduli
BS 903-A24:1992. Physical testing of rubberGuide to the determination of dynamic properties of rubbers
BS 903-A25:1968. Methods of testing vulcanized rubber.Determination of impact brittleness temperature
BS 903-A25:1992, ISO 812:1991. Physical testing of rubberDetermination of low-temperature brittleness
BS 903-A26:1969. Physical testing of rubberDetermination of hardness
BS 903-A26:1995, ISO 48:1994. Physical testing of rubberMethod for determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS 903-A27:1986, ISO 4637:1979. Physical testing of rubberDetermination of rubber to fabric adhesion. Direct tension method
BS 903-A28:1970. Methods of testing vulcanized rubber.Determination of adhesion of vulcanized rubber to rigid plates in shear (quadruple shear test)
BS 903-A29:1984, ISO 2921-1982. Physical testing of rubberDetermination of low temperature characteristics by temperature-retraction procedure (TR test)
BS 903-A29:1997, ISO 2921:1997. Physical testing of rubberDetermination of low-temperature characteristics. Temperature-retraction procedure (TR test)
BS 903-A3.2:1997, ISO 34-2:1996. Physical testing of rubber. Determination of tear strengthSmall (Delft) test pieces
BS 903-A3:1982, ISO 34-1979. Physical testing of rubberDetermination of tear strength (trouser, angle and crescent test pieces)
BS 903-A3:1995, ISO 34-1:1994. Physical testing of rubberMethod for determination of tear strength (trouser, angle and crescent test pieces)
BS 903-A30:1975. Physical testing of rubberDetermination of the permeability of rubber to gases (constant pressure method)
BS 903-A30:1996, ISO 2782:1995. Physical testing of rubberDetermination of permeability to gases
BS 903-A31:1976. Physical testing of rubberDetermination of the low-frequency dynamic properties of rubbers by means of a torsion pendulum
BS 903-A32:1977, ISO 3383-1976. Methods of testing vulcanized rubber.General directions for achieving elevated or sub-normal temperatures
BS 903-A32:1988, ISO 3383:1985. Physical testing of rubberGeneral directions for achieving elevated or subnormal temperatures for test purposes
BS 903-A33:1985, ISO 3865-1983. Physical testing of rubberMethods of test for staining in contact with organic materials
BS 903-A34:1978. Methods of testing vulcanized rubber.Determination of stress relaxation of rubber rings in compression
BS 903-A35:1985, ISO 471-1983. Physical testing of rubberTemperatures, humidities and times for conditioning and testing of test pieces
BS 903-A35:1995, ISO 471:1995. Physical testing of rubberTemperatures, humidities and times for conditioning and testing of test pieces
BS 903-A36:1978, ISO 4661-1977. Methods of testing vulcanized rubber.Preparation of test pieces
BS 903-A36:1988, ISO 4661/1-1986. Physical testing of rubberPreparation of samples and test pieces
BS 903-A36:1995, ISO 4661-1:1993. Physical testing of rubberMethod for preparation of samples and test pieces
BS 903-A37:1979. Physical testing of rubberAssessment of adhesion to and corrosion of metals
BS 903-A37:1987. Physical testing of rubberDetermination of adhesion to and corrosion of metals
BS 903-A37:1997, ISO 6505:1997. Physical testing of rubberDetermination of tendency to adhere to and to corrode metals
BS 903-A38:1978, ISO 4648-1978. Methods of testing vulcanized rubber.Determination of dimensions of test pieces and products for test purposes
BS 903-A38:1991, ISO 4648:1991. Physical testing of rubberMethods for the determination of dimensions of test pieces and products for test purposes
BS 903-A39:1980, ISO 1653-1975. Methods of testing vulcanized rubber.Determination of compression set under constant deflection at low temperatures
BS 903-A4:1973. Methods of testing vulcanized rubber.Determination of compression stress-strain
BS 903-A4:1990, ISO 7743:1989. Physical testing of rubberDetermination of compression stress-strain properties
BS 903-A40:1980, ISO 5600-1979. Methods of testing vulcanized rubber.Determination of adhesion to rigid materials using conical shaped parts
BS 903-A40:1988, ISO 5600:1986. Physical testing of rubberDetermination of adhesion to rigid materials using conical shaped parts
BS 903-A42:1983. Methods of testing vulcanized rubber.Determination of stress relaxation
BS 903-A42:1992, ISO 3384:1991. Physical testing of rubberMethod for determination of stress relaxation in compression at ambient and at elevated temperatures
BS 903-A43:1982, ISO 1431/1-1980. Methods of testing vulcanized rubber.Determination of resistance to ozone cracking (static strain test)
BS 903-A43:1990, ISO 1431-1:1989. Physical testing of rubberMethod for determination of resistance to ozone cracking (static strain test)
BS 903-A44:1983, ISO 1431/2-1982. Physical testing of rubberDetermination of resistance to ozone cracking (dynamic strain test)
BS 903-A44:1995, ISO 1431-2:1994. Physical testing of rubberMethod of determination of resistance to ozone cracking (dynamic strain test)
BS 903-A46:1984, ISO 6179-1981. Methods of testing vulcanized rubber.Determination of vapour transmission rate of volatile liquids through rubber sheet and rubber coated fabrics
BS 903-A46:1991, ISO 6179:1989. Physical testing of rubberMethod for determination of the transmission rate of volatile liquids
BS 903-A47:1982, ISO 6133-1981. Physical testing of rubberAnalysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS 903-A48:1984, ISO 4647:1982. Methods of testing vulcanized rubber.Determination of static adhesion to textile cord (H-pull test)
BS 903-A49:1984, ISO 4666-1:1982. Physical testing of rubberDetermination of temperature rise and resistance to fatigue in flexometer testing (basic principles)
BS 903-A5:1974. Methods of testing vulcanized rubber.Determination of tension set
BS 903-A5:1993, ISO 2285:1988. Physical testing of rubberMethod for determination of tension set at normal and high temperatures
BS 903-A5:1997, ISO 2285:1997. Physical testing of rubberDetermination of tension set at normal and high temperatures
BS 903-A50:1984, ISO 4666-3:1982. Methods of testing vulcanized rubber.Determination of temperature rise and resistance to fatigue in flexometer testing (compression flexometer)
BS 903-A51:1986, ISO 6943:1984. Methods of testing vulcanized rubber.Determination of resistance to tension fatigue
BS 903-A52:1986, ISO 6914:1985. Physical testing of rubberDetermination of ageing characteristics by measurement of stress at a given elongation
BS 903-A53:1989, ISO 4665-2:1985. Physical testing of rubberMethods for exposure to natural weathering, for use in determining resistance to weathering
BS 903-A54:1989, ISO 4665-3:1987. Physical testing of rubberMethods for exposure to artificial light, for use in determining resistance to weathering
BS 903-A55:1989, ISO 4665-1:1985. Physical testing of rubberMethods for assessment of changes in properties after exposure to natural weathering or artificial light, for use in determining resistance to weathering
BS 903-A56:1989, ISO 5603:1986. Physical testing of rubberDetermination of adhesion to wire cord
BS 903-A57:1989, ISO 7619-1986. Physical testing of rubberDetermination of indentation hardness by means of pocket hardness meters
BS 903-A57:1997, ISO 7619:1997. Physical testing of rubberDetermination of indentation hardness by means of pocket hardness meters
BS 903-A58.1:2001, ISO 289-3:1999. Physical testing of rubberMethods using the Mooney viscometer. Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR
BS 903-A58:1990. Physical testing of rubberMethods using the Mooney viscometer
BS 903-A59.1:1997, ISO 2007:1991. Physical testing of rubber. Methods using plastimetersDetermination of the rapid plasticity number
BS 903-A59:1990. Physical testing of rubberMethods using plastimeters
BS 903-A6:1969. Methods of testing vulcanized rubber.Determination of compression set after constant strain
BS 903-A6:1992, ISO 815:1991. Physical testing of rubberMethod for determination of compression set at ambient, elevated or low temperatures
BS 903-A60.1:1996. Physical testing of rubber. CuremeteringGuide to the use of curemeters
BS 903-A60.1:2000, BS ISO 6502:1999. Physical testing of rubber. CuremeteringGuide to the use of curemeters
BS 903-A60.2:1992, ISO 3417:1991. Physical testing of rubber. CuremeteringMethod for the determination of vulcanization characteristics using an oscillating disc curemeter
BS 903-A61:1994. Physical testing of rubberDetermination of the frictional properties of rubber
BS 903-A62:1993, ISO 9026:1991. Physical testing of rubberMethod for determination of green strength of raw rubber of unvulcanized compounds
BS 903-A63:1995, ISO 3387:1994. Physical testing of rubberMethod for determination of crystallization effects by hardness measurements
BS 903-A64:1995, ISO 2393:1994. Physical testing of rubberMethod for the preparation, mixing and vulcanization of rubber test mixes
BS 903-A8:1963. Methods of testing vulcanized rubber.Determination of rebound resilience
BS 903-A8:1990. Physical testing of rubberMethod for determination of rebound resilience
BS 903-A9:1957. Methods of testing vulcanized rubber.Determination of abrasion resistance
BS 903-A9:1988. Physical testing of rubberDetermination of abrasion resistance
BS 903-B14:1964. Methods of testing vulcanized rubber.Determination of carbon black
BS 903-B15:1963. Methods of testing vulcanized rubber.Determination of manganese
BS 903-B16:1967. Methods of testing vulcanized rubber.Determination of antimony
BS 903-B17:1959. Methods of testing vulcanized rubber.Determination of total copper
BS 903-B19:1958. Methods of testing vulcanized rubber.Preparation and examination of water extract
BS 903-C1:1982, BS 2782- 2:Method231A:1982. Methods of testing vulcanized rubber.Determination of surface resistivity
BS 903-C1:1991, BS 2782-2:Method 231A:1991. Physical testing of rubberDetermination of surface resistivity
BS 903-C2:1982, BS 2782-2:Method 230A:1982. Physical testing of rubberDetermination of volume resistivity
BS 903-C3:1982, BS 2782-2:Meth 240A&240B:1982. Methods of testing vulcanized rubber.Determination of loss tangent and permittivity at power and audio frequencies
BS 903-C4:1983, BS 2782-2:Methods 220 and 221. Physical testing of rubberDetermination of electric strength
BS 903-C5:1983, BS 2782- 2:Method 232:1983. Methods of testing vulcanized rubber.Determination of insulation resistance
BS 903-C5:1992, BS 2782-2:Method 232:1992,IEC 60167:1964. Physical testing of rubberDetermination of insulation resistance
BS 903-s B1 to B5:1958. Methods of testing vulcanized rubber.Preparation of material and extraction methods
BS 903-s B11 & B12:1960. Physical testing of rubberRubber (polymer) determinations
BS 903-s B6 to B10:1958. Physical testing of rubberDetermination of sulphur
BS 9040:1978. Specification for gas-filled microwave switching tubes of assessed quality: generic data and methods of test
BS 9041:1978. Rules for the preparation of detail specifications for gas filled microwave switching tubes of assessed quality: tunable and broadband TR tubes and TR limiters. Full assessment level
BS 9042:1971. Rules for the preparation of detail specifications for gas-filled microwave switching tubes of assessed quality: ATR tubes
BS 9043:1977. Rules for the preparation of detail specifications for gas filled microwave switching tubes of assessed quality: pre-TR tubes. Full assessment level
BS 9044:1971. Rules for the preparation of detail specifications for gas-filled microwave switching tubes of assessed quality: passive protection tubes
BS 9045:1981. Specification for microwave noise generators: generic data and methods of test
BS 9046:1981. Blank detail specification for microwave noise generators of assessed quality. Basic assessment level
BS 9047:1978. Specification for glow modulator tubes of assessed quality: generic data and methods of test
BS 9048:1978. Rules for the preparation of detail specifications for glow modulator tubes of assessed quality
BS 9050:1971. Specification for cathode ray tubes of assessed quality: generic data and methods of test
BS 9051:1971. Rules for the preparation of detail specifications for high precision professional instrument cathode ray tubes
BS 905-1:1985. Sound and television broadcast receivers and associated equipment: electromagnetic compatibility.Specification for limits of radio interference
BS 9052:1970. Rules for the preparation of detail specifications for general purpose professional instrument cathode ray tubes of assessed quality
BS 905-2:1985. Sound and television broadcast receivers and associated equipment: electromagnetic compatibility.Specification for limits of immunity
BS 905-2:1991, EN 55020:1988. Sound and television broadcast receivers and associated equipment: electromagnetic compatibilitySpecification for immunity from radio interference of broadcast receivers and associated equipment
BS 9053:1973. Rules for the preparation of detail specifications for electrical charge storage display cathode ray tubes of assessed quality
BS 9054:1971. Rules for the preparation of detail specifications for radar display cathode ray tubes of assessed quality
BS 9055:1982. Specification for surge arrester tubes of assessed quality: generic data and methods of test
BS 9056:1982. Blank detail specification for surge arrester tubes of assessed quality. Basic assessment level
BS 9060:1971. Specification for camera tubes of assessed quality: generic data and methods of test
BS 9061:1971. Rules for the preparation of detail specifications for vidicon tubes of assessed quality electromagnetic focusing and scanning
BS 906-1:1972. Specification for engineers' parallelsMetric units
BS 906-2:1972. Specification for engineers' parallels.Imperial units
BS 9062:1983. Specification for microwave passive components of assessed quality: generic data and methods of test
BS 9063:1983. Blank detail specification for circulators or isolators of assessed quality (QA). Full and basic assessment level
BS 9064:1983. Sectional specification for circulators or isolators of assessed quality for capability approval
BS 907:1965. Specification for dial gauges for linear measurement
BS 907:2008. Specification for dial gauges for linear measurement
BS 9070 N002:1971. Detail specification for fixed metallized mica dielectric capacitors (style C2AED). Rectangular non-metallic case, centred wires on one face. General application category
BS 9070 N003:1971. Detail specification for fixed metallized mica dielectric capacitors (style C2AEA). Rectangular non-metallic case, axial wires at both ends. General application category
BS 9070 Section 10:1980. Specification for fixed capacitors of assessed quality: generic data and methods of test.Tantalum electrolytic capacitor modules
BS 9070 Section 8:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test.Aluminium electrolytic capacitors
BS 9070:Sections 1 and 2:1969. Specification for fixed capacitors of assessed quality: generic data and methods of testPrinciples and mandatory procedures. General rules for drafting detail specifications
BS 9070-3:1970. Specification for fixed capacitors of assessed quality: generic data and methods of testTantalum electrolytic capacitors
BS 9070-4:1971. Specification for fixed capacitors of assessed quality: generic data and methods of testPolystyrene dielectric capacitors
BS 9070-5:1971. Specification for fixed capacitors of assessed quality: generic data and methods of testCeramic dielectric capacitors
BS 9070-6:1971. Specification for fixed capacitors of assessed quality: generic data and methods of testPolycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and polypropylene dielectric capacitors for d.c. and a.c. use
BS 9070-7:1971. Specification for fixed capacitors of assessed quality: generic data and methods of testMica dielectric capacitors
BS 9073 N0034:1978. Detail specification for fixed tantalum electrolytic capacitors. Porous anode, polar non-solid electrolyte. Tubular insulated metallic case, PTFE/elastomer seal, axial wire terminations. Full plus additional assessment level
BS 9074 N001:1974. Detail specification for fixed polystyrene foil dielectric capacitors. Tubular insulated case, axial terminations. Full assessment level
BS 9074 N002:1974. Detail specification for fixed polystyrene foil dielectric capacitors. Tubular insulated case, axial terminations. Full asessment level
BS 9074 N007:1978. Detail specification for fixed polystyrene film dielectric extended foil capacitors. Rectangular non-metallic case, unidirectional terminations. Full plus additional assessment level
BS 9074 N007:1981. Detail specification for polystyrene film dielectric capacitors, extended foil. Rectangular non-metallic case, unidirectional terminations. Full plus additional assessment level
BS 9075 N001:1981. Detail specification for fixed ceramic dielectric capacitors (type 1 and type 2). Rectangular monolithic chip. Full assessment level
BS 9075 N023:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 1B). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9075 N024:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 2C1). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9075 N025:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 2F4). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9076 N001 to 004:1974. Detail specification for fixed metallized polyethylene terephthalate (PETP) film or metallized polycarbonate film dielectric capacitors. Rectangular non-metallic case axial or radial terminations, centrally spaced. Full assessment level
BS 9078 N002:1974. Detail specification for fixed aluminium electrolytic capacitors (type 1). Non-solid electrolyte. Cylindrical, polarized, insulated case, screw terminations at one end. Full assessment level
BS 9090:1977. Variable capacitors of assessed quality: generic data and methods of test
BS 9091:1979. Rules for the preparation of detail specifications for variable tuning capacitors, type A (full assessment level)
BS 9092:1979. Rules for the preparation of detail specifications for variable trimmer capacitors, type B (full assessment level)
BS 9093 N001:1977. Detail specification for variable pre-set air dielectric capacitors (type C). Vane type without locking device, not sealed. Full assessment level
BS 9093:1979. Rules for the preparation of detail specifications for variable pre-set capacitors, type C (full assessment level)
BS 9094:1979. Rules for the preparation of detail specifications for variable tuning capacitors, type A (basic assessment level)
BS 9095:1979. Rules for the preparation of detail specifications for variable trimmer capacitors, type B (basic assessment level)
BS 9096:1979. Rules for the preparation of detail specifications for variable pre-set capacitors, type C (basic assessment level)
BS 91:1973. Specification for electric cable soldering sockets
BS 91:1998. Electric cable soldering sockets. Specification
BS 9100:1983. Specification for capability approval for custom-built capacitors and capacitor modules: generic data and methods of test
BS 9110:1969. Specification for fixed resistors of assessed quality: generic data and methods of test
BS 9111 N016:1974. Detail specification for fixed low power non-wirewound insulated resistors (type 1). Metal film, helically cut, axial wire terminations. Basic assessment level
BS 9111:1973. Rules for the preparation of detail specifications for fixed low power non-wirewound resistors of assessed quality
BS 9114 N001:1973. Detail Specification. Fixed wirewound non-insulated resistor (Type 2) of assessed quality: axial terminations. General application category
BS 9114:1970. Rules for the preparation of detail specifications for fixed wirewound resistors (Type 2) of assessed quality
BS 9120:1984. Specification for radio interference suppression filters of assessed quality: generic data and methods of test
BS 9120:1988. Specification for radio interference suppression filters of assessed quality: generic data and methods of test
BS 9121:1984. Blank detail specification for radio interference suppression filters of assessed quality. Basic assessment level
BS 9121:1988. Blank detail specification for radio interference suppression filters of assessed quality. Basic and full assessment levels
BS 9124:2008. Specification for steel and aluminium access cover systems with over 1 m clear opening
BS 9125:1988. Specification for capability approval of manufacturers of passive radio interference suppression filter units of assessed quality generic data
BS 913:1973. Specification for wood preservation by means of pressure creosoting
BS 9130:1972. Specification for potentiometers of assessed quality: generic data and methods of test
BS 9131 N001 to 016:1974. Detail specification for lead-screw actuated wirewound or non-wirewound preset potentiometers. Rectangular and square forms, container sealed, actuating device insulated from resistive element, slipping clutch at each end of travel. Full assessment level
BS 9131:1973. Rules for the preparation of detail specifications for lead-screw actuated preset potentiometers of assessed quality
BS 9133 N001 to 003:1975. Detail specification for single turn low power non-wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed. Full assessment level
BS 9133 N004 to 010:1975. Detail specification for single turn low power wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed. Full assessment level
BS 9133:1973. Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality
BS 914:1952. Specification for quality of laboratory porcelain
BS 9150:1983. Specification for electrical relays of assessed quality: generic data and methods of test
BS 9151 N0043:1979. Detail specification for all-or-nothing electromechanical relays. Enclosed plug-in construction. Light and medium duty capability with continuous rating. Basic assessment level
BS 9151:1972. Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality. Full and basic assessment levels
BS 915-2:1972. Specification for high alumina cementMetric units
BS 9152:1978. Rules for the preparation of detail specifications for reed relays of assessed quality
BS 9153:1982. Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality primarily intended for telecommunication applications. Full and basic assessment levels
BS 916:1953. Specification for black bolts, screws and nuts, hexagon and square, with B.S.W. threads, and partly machined bolts, screws and nuts, hexagon and square, with B.S.W. or B.S.F. threads
BS 919-1:1960. Specification for screw gauge limits and tolerancesGauges for screw threads of Unified form
BS 919-1:2007. Screw gauge limits and tolerancesSpecification for gauges for screw threads of unified form
BS 919-2:1971. Specification for screw gauge limits and tolerancesGauges for screw threads of Whitworth and BA forms
BS 919-2:2007. Screw gauge limits and tolerancesSpecification for gauges for screw threads of Whitworth and B.A. forms
BS 919-3:1968. Specification for screw gauge limits and tolerancesGauges for ISO metric screw threads
BS 919-3:2007. Screw gauge limits and tolerancesSpecification for gauges for screw threads of ISO metric form
BS 919-4:1964. Specification for screw gauge limits and tolerancesLimits of size for gauges for screw threads of Unified form diameters ¼ in and larger
BS 919-4:2007. Screw gauge limits and tolerancesLimits of size for gauges for screw threads of unified form diameters 1/4 in and larger
BS 9200:1972. Specification for reed contact units of assessed quality: generic data and methods of test
BS 921:1976. Specification. Rubber mats for electrical purposes
BS 9210 N0001-2:1982. Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohmsControl drawings. Mating face details and gauge information
BS 9210 N0003:1976. Detail specification for radio frequency connectors (type BNC). Unsealed, soldered, captive contact, 50 ohms. Full assessment level
BS 9210 N0004:1981. Detail specification for radio frequency coaxial connectors (series BNC). Unsealed, soldered, captive contact, 50 ohms. Basic assessment level
BS 9210 N0006-1:1985. Detail specification for radio frequency coaxial connectors (series SMA). 50 ohms, unsealed, soldered, centre contact, clamp outer for flexible cables, solder outer for semi-rigid cablesFull assessment level
BS 9210 N0006-2:1978. Detail specification for radio frequency coaxial connectors (series SMA). 50 ohms, unsealed, soldered, centre contact, clamp outer for flexible cables, solder outer for semi-rigid cablesControl drawings. Mating face details and gauge information
BS 9210 N0006-3:1985. Detail specification for radio frequency coaxial connectors (series SMA). 50 ohms, unsealed, soldered, centre contact, clamp outer for flexible cables, solder outer for semi-rigid cablesParameters. Full assessment level
BS 9210 N0009-1:1978. Detail specification for radio frequency connectors (series SMC)Unsealed, soldered, captive contact, 50 Ω, screw coupling
BS 9210 N0009-2:1978. Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw couplingControl drawings. Mating face details and gauge information
BS 9210 N001-1:1975. Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohmsFull assessment level
BS 9210 N007-1:1976. Detail specification for radio frequency connectors (type SMB)Unsealed, soldered, captive contact, 50 Ω, snap-on couplings
BS 9210 N007-2:1976. Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplingsControl drawings. Mating face details and gauge information
BS 9210:1984. Specification for radio frequency connectors of assessed quality: generic data and methods of test
BS 9215:1986. Specification for capability approval of custom-built radio frequency connector/cable assemblies: generic specification
BS 9215:1991. Specification for capability approval of radio frequency connector cable assemblies and radio frequency cable assemblies: generic specification, test methods, procedures, customer blank detail specification and guidance
BS 922 & 1691:1959. Specification for electrical refrigerators and food freezers for household use
BS 9220 N001:1971. Detail specification for ordinary rectangular (2:1) rigid waveguide tubing. Standard wall thickness. General application category
BS 9220 N002:1971. Detail specification for medium flat rectangular (4:1) rigid waveguide tubing. Standard wall thickness. General application category
BS 9220 N003:1971. Detail specification for flat rectangular (8.33:1) rigid waveguide tubing. Standard wall thickness. General application category
BS 9220 N004:1971. Detail specification for circular rigid waveguide tubing. Standard wall thickness. General application category
BS 9220:1971. Specification for rigid waveguide tubing of assessed quality: generic data and methods of test
BS 9222:2007. Personal financial planning. Guidance on the application of BS ISO 22222 and assessment of compliance
BS 9230:1986. Specification for connectors of assessed quality for optical fibres and cables: generic data and methods of test
BS 923-1:1980, IEC 60060-1:1973. Guide on high-voltage testing techniques.General
BS 923-1:1990, IEC 60060-1:1989. Guide on high-voltage testing techniques.General
BS 923-2:1980, IEC 60060-2:1973. Guide on high-voltage testing techniques.Test procedures
BS 923-3:1980, IEC 60060-3:1976. Guide on high-voltage testing techniquesMeasuring devices
BS 923-4:1980, IEC 60060-4:1977. Guide on high-voltage testing techniquesApplication guide for measuring devices
BS 9250:2007. Code of practice for design of the airtightness of ceilings in pitched roofs
BS 9251:2005. Sprinkler systems for residential and domestic occupancies. Code of practice
BS 9252:2011. Components for residential sprinkler systems. Specification and test methods for residential sprinklers
BS 9266:2013. Design of accessible and adaptable general needs housing. Code of practice
BS 9295:2010. Guide to the structural design of buried pipelines
BS 93:1951. Specification for British Association (B.A.) screw threads with tolerances for sizes 0 B.A. to 16 B.A.
BS 93:2008. British Association (B.A.) screw threads. Requirements
BS 9300 C155-168:1971. Detail specifications for silicon voltage-regulator diodes
BS 9300 C199-276:1971. Detail specification for silicon voltage-regulator diodes
BS 9300 C328:1971. Detail specification for silicon n-p-n high frequency transistor
BS 9300 C329-331:1973. Detail specification for silicon stud mounted, reverse blocking triode thyristors
BS 9300 C367-368:1971. Detail specification for silicon fast switching, double ended diodes
BS 9300 C377-378:1971. Detail specifications for silicon coaxial mixer diodes
BS 9300 C379-388:1971. Detail specifications for silicon stud mounted, power rectifier diodes
BS 9300 C397-403:1971. Detail specification for silicon variable capacitance diodes
BS 9300 C405-429:1971. Detail specifications for silicon voltage-regulator diodes
BS 9300 C451-454:1971. Detail specification for silicon n-p-n medium power transistors
BS 9300 C476:1973. Detail specification for silicon avalanche rectifier diode
BS 9300 C479:1971. Detail specification for six terminal device, containing two isolated high gain n-p-n silicon planar transistors
BS 9300 C492:1971. Detail specification for silicon n-p-n planar transistor intended for low level, low noise amplifier applications
BS 9300 C534:1971. Detail specification for silicon coaxial resistive switching diode
BS 9300 C556-563:1971. Detail specifications for silicon power rectifier diodes
BS 9300 C564-571:1971. Detail specifications for silicon power rectifier diodes
BS 9300 C572-579:1971. Detail specifications for silicon power rectifier diodes
BS 9300 C582-584:1971. Detail specifications for reverse blocking triode thyristors
BS 9300 C588:1971. Detail specification for silicon n-p-n high frequency planar transistor
BS 9300 C599:1971. Detail specification for silicon microwave switching diode, rod mounted
BS 9300 C644:1971. Detail specification for silicon n-p-n planar epitaxial transistors
BS 9300 C649-653:1971. Detail specification for silicon stud mounted, reverse blocking triode thyristors
BS 9300 C667-668:1971. Detail specification for silicon avalanche rectifier diodes
BS 9300 C678-721:1971. Detail specification for silicon voltage regulator diodes
BS 9300 C762:1971. Detail specification for mixer diodes for use at X-band frequencies
BS 9300 C771-772:1971. Detail specification for coaxial mixer diodes
BS 9300 C776-777:1971. Detail specification for germanium coaxial mixer diodes
BS 9300 C778:1971. Detail specification for a matched pair of germanium coaxial mixer diodes
BS 9300 C780-831:1971. Detail specification for silicon voltage regulator diodes
BS 9300 C841-849:1971. Detail specification for silicon voltage regulator diodes
BS 9300:1969. Specification for semiconductor devices of assessed quality: generic data and methods of test
BS 9301 N002:1971. Detail specification for general purpose silicon signal diodes. 150 mA, 150 V, hermetically sealed, glass encapsulation. General application category Q
BS 9301:1969. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: general purpose signal diodes
BS 9302:1969. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: switching diodes
BS 9305 N001:1972. Detail specification for silicon voltage regulator diodes. 1.5 W, 3.3 to 33 V (5%), hermetically sealed. General application category Q
BS 9305 N041:1972. Detail specification for silicon voltage regulator diodes. 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation. General application category Q
BS 9305 N042:1972. Detail specification for silicon voltage regulator diodes. 1.5 W, 6.8 to 200 V (5%), hermetically sealed. General application category C
BS 9305 N044:1974. Detail specification for silicon voltage regulator diodes. 1.0 W, 3.3 to 33 V (5%), hermetically sealed. Full assessment level
BS 9305:1969. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: voltage regulator diodes
BS 9306:1979. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: transient suppressor diodes
BS 9307:1975. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: variable capacitance diodes for tuning applications
BS 9320:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave mixer diodes (c.w. operation)
BS 9321:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave mixer diodes (pulse operation)
BS 9322:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave detector diodes
BS 9323:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: p-i-n microwave passive limiter diodes
BS 9324:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: p-i-n microwave active switching diodes
BS 9325:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave Gunn oscillators (c.w. operation)
BS 9326:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave Gunn oscillators (pulse operation)
BS 9327:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave avalanche oscillators (c.w. operation)
BS 9328:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave avalanche oscillators (pulse operation)
BS 9329:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: varactor diodes for frequency multiplication
BS 9330:1969. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low current rectifier diodes (up to 3 ampere rating)
BS 9331 N039 to 046:1974. Detail specification for medium current rectifier diodes. 3 A, 300 V, 600 V, 900 V, 1200 V, hermetically sealed. Full assessment level
BS 9331:1969. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: medium current rectifier diodes (1-100 ampere rating)
BS 9332:1970. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high current rectifier diodes (greater than 50 ampere rating)
BS 9333:1972. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: controlled avalanche rectifier diodes
BS 9334:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: rectifier bridges. Ambient rated, single phase, in solid (plastics) encapsulation
BS 934:1940. Specification for vulcanized fibre (natural colour) rods and tubes for electrical purposes
BS 9340:1969. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low current general purpose thyristors (up to 3 ampere rating)
BS 9341:1969. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: medium current general purpose thyristors (1-100 ampere rating)
BS 9342:1972. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high current general purpose thyristors (greater than 50 ampere rating)
BS 9343:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: case rated bi-directional triode thyristors (triacs)
BS 9350:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low noise, low power microwave transistors
BS 9351:1980. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave semiconductor switches (without integrated driver circuits)
BS 9352:1980. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: field effect transistors for microwave applications
BS 9360:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low frequency, low power transistors
BS 9361:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high frequency, low power transistors
BS 9362:1972. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high power transistors for linear applications
BS 9363:1972. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: high power transistors for switching applications
BS 9364 N007 and N009:1978. Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
BS 9364 N008 and N010:1978. Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level
BS 9364 N011:1978. Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
BS 9364 N012:1978. Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level
BS 9364 N013:1979. Detail specification for low power silicon p-n-p switching transistors. 25 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
BS 9364 N016:1979. Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessment level
BS 9364 N017:1979. Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plus additional assessment level
BS 9364:1973. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: switching transistors
BS 9365:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: transistors (general)
BS 9370:1983. Specification for capability approval of light emitting and infra-red diode arrays of assessed quality: generic data and methods of test
BS 939:1977. Specification for engineers' squares (including cylindrical and block squares)
BS 939:2007. Engineers' squares (including cylindrical and block squares). Specification
BS 9400:1970. Specification for integrated electronic circuits and micro-assemblies of assessed quality (qualification approval procedures): generic data and methods of test
BS 9401:1970. Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL digital gate circuits. General application category
BS 9402:1972. Rules for the preparation of detail specifications for integrated circuits of assessed quality: DTL digital gate circuits (general application category)
BS 9403:1972. Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL digital inverter circuits. General application category
BS 9404:1972. Rules for the preparation of detail specifications for integrated circuits of assessed quality: DTL digital inverter circuits. General application category
BS 9405:1972. Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL digital interconnected gate circuits. General application category
BS 941:1970. Specification for filament lamps for road vehicles
BS 9420:1972. Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL digital bistable circuits. General application category
BS 9430:1978. Rules for the preparation of detail specifications for integrated circuits of assessed quality: voltage regulators. Full assessment level
BS 9440:1973. Rules for the preparation of detail specifications for integrated circuits of assessed quality: complex digital circuits - bipolar. General application category
BS 9442:1973. Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL binary counter circuits. General application category
BS 9443:1974. Rules for the preparation of detail specifications for integrated circuits of assessed quality: TTL binary memory circuits. General application category
BS 9444:1974. Rules for the preparation of detail specifications for integrated circuits of assessed quality: insulated gate shift registers. General application category
BS 9450:1975. Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures): generic data and methods of test
BS 9450:1998. Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures). Generic data and methods of test
BS 946:1970. Method for the designation of yarns
BS 9460:1974. Rules for the preparation of detail specifications for integrated circuits of assessed quality: differential operational amplifiers. General application category
BS 9461:1974. Rules for the preparation of detail specifications for integrated circuits of assessed quality: differential comparator amplifiers. General application category
BS 947:1970. Specification for a universal system for designating linear density of textiles (Tex system)
BS 9470:1980. Rules for the preparation of detail specifications for integrated circuits of assessed quality: microwave amplifiers. Full assessment level
BS 9490:1975. Rules for the preparation of detail specifications for digital integrated circuits of assessed quality. Full assessment level
BS 9491:1975. Rules for the preparation of detail specifications for analogue integrated circuits of assessed quality. Full assessment level
BS 949-1:1976. Screwing tapsSpecification for taps for ISO metric threads
BS 949-1:1992. Screwing tapsSpecification of general dimensions
BS 9492:1978. Rules for the preparation of detail specifications for capacitively coupled digital integrated circuits of assessed quality. Full assessment level
BS 949-2:1979. Screwing tapsTaps for Unified threads (and for the obsolescent threads of Whitworth and BA forms)
BS 949-2:1992. Screwing tapsSpecification for unified ground thread taps. Manufacturing tolerances
BS 9493:1981. Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions
BS 949-3:1993. Screwing taps.Specification for pipe thread taps
BS 9494:1981. Rules for the preparation of detail specifications for fusible link programmable read-only memories of assessed quality (full assessment level)
BS 949-4:1990, EN 22857:1989,ISO 2857:1973. Screwing tapsSpecification for metric ground thread taps: manufacturing tolerances
BS 949-5:1990, EN 25967:1989,ISO 5967:1981. Screwing tapsNomenclature and terminology
BS 9500:1969. Specification for sockets of assessed quality for electronic tubes and valves and plug-in devices: generic data and methods of test
BS 9500:1990. Specification for sockets of assessed quality for plug-in electronic components: generic data and methods of test
BS 950-1:1967. Specification for artificial daylight for the assessment of colourIlluminant for colour matching and colour appraisal
BS 9501:1990. Rules for the preparation of detail specifications for in-line and pin-grid array sockets
BS 950-2:1967. Specification for artificial daylight for the assessment of colourViewing conditions for the graphic arts industry
BS 951:1986. Specification for clamps for earthing and bonding purposes
BS 951:1999. Electrical earthing. Clamps for earthing and bonding. Specification
BS 951:2009. Electrical earthing. Clamps for earthing and bonding. Specification
BS 9520:1983. Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures
BS 952-1:1978. Glass for glazingClassification
BS 9521:1983. Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of detail specifications
BS 952-1:1995. Glass for glazingClassification
BS 9522 N0001:1982. Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling with front release, rear removable crimp contacts. Full assessment level
BS 9522 N0003:1982. Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling non-barrier sealed with rear release, rear removable crimp contacts and barrier sealed with non-removable solder contacts. Full assessment level
BS 9522 N0003:1990. Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles. Full plus airframe fit assessment.
BS 952-2:1980. Glass for glazingTerminology for work on glass
BS 9522:1984. Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications. Full and basic assessment levels
BS 9522:1990. Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications. Full, basic and full plus airframe assessment levels
BS 9523 N0001:1978. Detail specification for multi-contact rectangular electrical connectors with integral metal housing (shell) for d.c. and low frequency applications. Unsealed with trapezoidal polarized housing and non-removable solder contacts. Full assessment level
BS 9523:1984. Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications. Full and basic assessment levels
BS 9524 N0001:1981. Detail specification for multi-contact rectangular electrical connectors with moulded bodies for d.c. and low frequency applications. Unsealed with end guides or jackscrew couplings and front release, rear removable crimp contacts. Full assessment level
BS 9524 N0002:1981. Detail specification for multi-contact rectangular electrical connectors with moulded bodies for d.c. and low frequency applications. Unsealed with end guides or jackscrew couplings and non-removable solder contacts. Full assessment level
BS 9524:1984. Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications. Full and basic assessment levels
BS 9525 N0001:1979. Detail specification for multi-contact two-part printed board electrical connectors with replaceable contacts and through board solder, wire wrap or crimp terminations. Full assessment level
BS 9525 N0001:1982. Detail specification for multi-contact two-part printed board electrical connectors
BS 9525:1984. Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f. applications: full and basic assessment levels
BS 9526 N0001:1978. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level
BS 9526 N0002:1979. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, metal fixing flanges, guide key location, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level
BS 9526 N0003:1979. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level
BS 9526:1977. Rules for the preparation of detail specifications for electrical edge socket connectors of assessed quality - full and basic assessment level
BS 953:1979. Methods of test for safety and protective footwear
BS 9530:1988. Specification for cable fitting accessories of assessed quality for circular electrical connectors: generic data, methods of test and rules for the preparation of detail specifications
BS 9540:1983. Sectional specification for airframe-fit circular electrical connectors of assessed quality for low-frequency a.c. and d.c. applications (including engine connectors): requirements for design, performance and testing, and rules for the preparation of detail specifications
BS 9550:1989. Specification for capability approval procedures for d.c. and low frequency connector cable assemblies and wiring harnesses: generic data
BS 9561:1979. Specification for lever operated switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9562:1982. Specification for microswitches (sensitive switches) of assessed quality: generic data and methods of test: general rules for the preparation of detail specifications. Basic and full assessment levels
BS 9563 N001:1974. Detail specification for rotary wafer switches (manual). 30 mm single hole mounting, non-sealed, solder lugs. Basic assessment level
BS 9563 N0032:1980. Detail specification for rotary wafer switch (manual). 30 mm central hole mounting, spindle and panel sealed or non-sealed, solder terminations. Full assessment level
BS 9563:1979. Specification for rotary (manual) switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9564:1980. Specification for push-button switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9565:1981. Specification for printed board mounted programming switches of assessed quality: generic data and methods of test
BS 9566:1984. Rules for the preparation of detail specifications for printed board programming switches
BS 957:2008. Specification for feeler gauges
BS 9571 N/F000:1973. Detail specification for lever operated switches, quick-make quick-break. Assessment levels as in individual detail specifications
BS 957-1:1941. Specification for feeler gaugesInch units
BS 957-2:1969. Specification for feeler gaugesMetric units
BS 9578 N/F000:1973. Detail specification for microswitches (sensitive switches). 30 mm nominal body dimension, plunger actuated. Assessment levels as in individual detail specifications
BS 958:1968. Specification for spirit levels for use in precision engineering
BS 959:1950. Specification for internal micrometers (including stick micrometers)
BS 959:2008. Specification for internal micrometers (including stick micrometers)
BS 96:1954. Specification. Carbon brushes (parallel-sided) for use on commutator and slip-ring machines
BS 9600:1983. Specification for piezoelectric crystal filters of assessed quality: generic data and methods of test
BS 9601:1977. Rules for the preparation of detail specifications for hermetically-sealed metal enclosed piezoelectric crystal filters of assessed quality, full assessment
BS 9602:1984. Blank detail specification for quartz crystal filters of assessed quality: full assessment level
BS 9610:1982. Specification for quartz crystal units of assessed quality: generic data and methods of test
BS 9611 N004:1977. Detail specification for solder-sealed quartz crystal units for oscillator applications. AA, BF, CX and BC/1 enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9611 N005:1977. Detail specification for solder-sealed quartz crystal units for oscillator applications. AA, CX and BC/1 enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9611 N006:1977. Detail specification for solder-sealed quartz crystal units for oscillator applications. AA, CX, BF and BC/1 enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non- temperature controlled). Full assessment level
BS 9611 N007:1977. Detail specification for solder-sealed quartz crystal units for oscillator applications. AA, CX and BC/1 enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9611 N008:1977. Detail specification for solder-sealed quartz crystal units for oscillator applications. AA, CX and BC/1 enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9611 N009:1977. Detail specification for solder-sealed quartz crystal units for oscillator applications. AA, CX and BC/1 enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9611:1973. Rules for the preparation of detail specifications for solder-sealed quartz crystal units of assessed quality for oscillator applications. General application category
BS 9612 N004:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N005:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N006:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N007:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N008:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N009:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N010:1979. Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 6.0 to 25 MHz frequency range. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N011:1979. Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 6.0 to 25 MHz frequency range. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N012:1979. Detail specification for cold-welded seal quartz crystal units for oscillator applications. DK enclosures, 25 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N013:1979. Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 25 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N014:1979. Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N015:1979. Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N016:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N017:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N018:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N019:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612 N020:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9612 N021:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9612:1973. Rules for the preparation of detail specifications for welded seal quartz crystal units of assessed quality for oscillator applications. General application category
BS 9613 N001:1975. Detail specification for glass-encapsulated quartz crystal units for oscillator applications. DA, CY and CZ enclosures, 1.4 to 30 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9613 N002:1975. Detail specification for glass-encapsulated quartz crystal units for oscillator applications. DA, CY and CZ enclosures, 1.4 to 30 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9613 N003:1975. Detail specification for glass-encapsulated quartz crystal units for oscillator applications. DA, CY and CZ enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
BS 9613 N004:1975. Detail specification for glass-encapsulated quartz crystal units for oscillator applications. DA, CY and CZ enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
BS 9613 N005:1975. Detail specification for glass-encapsulated quartz crystal units for oscillator applications. DA, CY and CZ enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level.
BS 9613 N006:1975. Detail specification for glass-encapsulated quartz crystal units for oscillator applications. DA, CY and CZ enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level.
BS 9613:1973. Rules for the preparation of detail specifications for glass-encapsulated quartz crystal units of assessed quality for oscillator applications. General application category
BS 9616:1984. Blank detail specification for quartz crystal units of assessed quality: basic assessment level
BS 9617:1982. Rules for the preparation of detail specifications for quartz crystal units of assessed quality. Full assessment level
BS 9618:1988. Specification for capability approval of quartz crystal units: generic data
BS 9620:1975. Specification for quartz crystal oscillators of assessed quality: generic data and methods of test
BS 9625:1983. Blank detail specification for quartz crystal oscillators of assessed quality: full assessment level
BS 969:1982. Specification for limits and tolerances on plain limit gauges
BS 969:2008. Specification for limits and tolerances on plain limit gauges
BS 9690-1:2011. Non-destructive testing. Guided wave testingGeneral guidance and principles
BS 9690-2:2011. Non-destructive testing. Guided wave testingBasic requirements for guided wave testing of pipes, pipelines and structural tubulars
BS 970-1:1983. Specification for wrought steels for mechanical and allied engineering purposesGeneral inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels
BS 970-1:1991. Specification for wrought steels for mechanical and allied engineering purposesGeneral inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels
BS 970-1:1996. Specification for wrought steels for mechanical and allied engineering purposesGeneral inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels
BS 970-2:1970. Specification for wrought steels in the form of blooms, billets, bars and forgings.Direct hardening alloy steels, including alloy steels capable of surface hardening by nitriding
BS 970-2:1988. Specification for wrought steels for mechanical and allied engineering purposesRequirements for steels for the manufacture of hot formed springs
BS 970-3 Supplement No. 1:1973. Specification for wrought steels for mechanical and allied engineering purposesRequirements for carbon and carbon manganese steels for case hardening including free cutting steels
BS 970-3:1971. Specification for wrought steels in the form of blooms, billets, bars and forgings.Steels for case hardening
BS 970-3:1991. Specification for wrought steels for mechanical and allied engineering purposesBright bars for general engineering purposes
BS 970-4:1970. Specification for wrought steels for mechanical and allied engineering purposesValve steels
BS 970-5:1972. Specification for wrought steels in the form of blooms, billets, bars and forgings.Carbon and alloy spring steels for the manufacture of hot formed springs
BS 970-6:1973. Specification for wrought steels for mechanical and allied engineering purposesSI metric values (for use with BS 970-s 4 and 5)
BS 9720:1983. Specification for custom-built transformers and inductors of assessed quality: generic data and methods of test
BS 9720:1989. Specification for custom-built transformers and inductors of assessed quality: generic data and methods of test
BS 9721:1985. Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval
BS 9727:1985. Sectional specification for power transformers of assessed quality for use in electronic equipment for capability approval
BS 9728:1978. Sectional specification for power transformers of assessed quality for use in electronic equipment: full assessment level
BS 9730:1983. Sectional specification for power transformers of assessed quality for switched mode power supplies (SMPS) for use in electronic equipment: full assessment level
BS 9730:1986. Sectional specification for power transformers of assessed quality for switched mode power supplies (SMPS) for use in electronic equipment for capability approval
BS 9733:1985. Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval
BS 9734:1978. Sectional specification for pulse transformers of assessed quality for use in electronic equipment: full assessment level
BS 9741:1978. Sectional specification for inductors of assessed quality for use in electronic equipment: basic assessment level
BS 9741:1986. Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval
BS 9742:1978. Sectional specification for inductors of assessed quality for use in electronic equipment: full assessment level
BS 975:1957. Density-composition tables for aqueous solutions of nitric acid
BS 975:1987. Schedule for density-composition tables for aqueous solutions of nitric acid
BS 9750:1978. Specification for fixed r.f. inductors of assessed quality: generic data and methods of test
BS 9750:1990. Specification for fixed radio frequency inductors of assessed quality: generic data and methods of test
BS 9751 N0001:1980. Detail specification for fixed insulated (unshielded) radio frequency inductors. Wire wound on ferrite, iron dust or phenolic cylindrical former. Full assessment level
BS 9751:1979. Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level
BS 9752:1989. Blank detail specification for fixed insulated (unshielded) r.f. inductors suitable for surface mounting at the full assessment level
BS 9753:1982. Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment: full assessment level
BS 9753:1986. Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval
BS 976:1957. Density-composition tables for aqueous solutions of hydrochloric acid
BS 976:1987. Schedule for density-composition tables for aqueous solutions of hydrochloric acid
BS 9760:1977. Specification for printed circuits of assessed quality: generic data and methods of test: capability approval procedure and rules
BS 9761:1977. Specification for printed circuits of assessed quality: sectional specification for multilayer printed circuits
BS 9761:1988. Sectional specification for capability approval of manufacturers of multilayer rigid printed wiring boards of assessed quality with plated through holes
BS 9762:1977. Specification for printed circuits of assessed quality: sectional specification for double-sided printed circuits with plated through holes
BS 9762:1988. Sectional specification for capability approval of manufacture of double-sided rigid printed wiring boards of assessed quality with plated through holes
BS 9763:1977. Specification for printed circuits of assessed quality: sectional specification for single- and double-sided printed circuits without plated through holes
BS 9763:1988. Sectional specification for capability approval of manufacturers of single- or double-sided printed wiring boards of assessed quality without plated through holes
BS 9764:1979. Specification for printed circuits of assessed quality: sectional specification for flexible and flexi-rigid printed circuits without through hole connections
BS 9764:1988. Sectional specification for capability approval of manufacturers of single- or double-sided flexible printed wiring boards of assessed quality without through hole connections and with or without rigidizing component materials
BS 9765:1978. Specification for printed circuits of assessed quality: sectional specification for double-sided flexible and flexi-rigid printed circuits with through hole connections
BS 9765:1988. Sectional specification for capability approval of manufacturers of double-sided flexible printed wiring boards of assessed quality with through hole connections and with or without rigidizing component materials
BS 9766:1983. Specification for printed circuits of assessed quality: sectional specification for multilayer flexi-rigid printed circuits with through hole connections
BS 978-1:1968. Specification for fine pitch gears.Involute spur and helical gears
BS 978-2:1952. Specification for fine pitch gearsCycloidal type gears
BS 978-2:Addendum No. 1:1959. Gears for instruments and clockwork mechanisms. Cycloidal type gears.Double circular arc type gears
BS 978-3:1952. Specification for fine pitch gearsBevel gears
BS 978-5:1965. Specification for fine pitch gearsHobs and cutters
BS 9800:1985. Specification for capability approval of modular electronic networks: generic specification
BS 984:1976. Specification for weights of retail packages of knitting and rug yarns
BS 984:1990. Method for determination of net mass of retail packages of knitting and rug yarns
BS 988; 1076; 1097; 1451:1973. Specification for mastic asphalt for building (limestone aggregate)
BS 9925- 02.01 and Part 02.02:1988, IEC 60723-3-1:1985,QC 250201:1985,QC 250202:1985. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunicationsBlank detail specification: magnetic oxide cores for broad-band transformers. Assessment levels A and B
BS 9925-0:1984, IEC 60723-1:1982,QC 250000:1982. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunicationsGeneric specification
BS 9925-01.0:1984, IEC 60723-2:1983,QC 250100:1983. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunicationsSectional specification: magnetic oxide cores for inductor applications
BS 9925-01.01:1984, IEC 60723-2-1:1983,QC 250101:1983. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunicationsBlank detail specification: magnetic oxide cores for inductor applications. Assessment level A
BS 9925-02.0:1987, IEC 60723-3:1985,QC 250200:1985. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunicationsSectional specification: magnetic oxide cores for broad-band transformers
BS 9925-03.0:1988, IEC 60723-4:1987,QC 250300:1987. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunicationsSectional specification: Magnetic oxide cores for transformers and chokes for power applications
BS 9925-03.01:1988, IEC 60723-4-1:1987,QC 250301:1987. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for telecommunicationsBlank detail specification: magnetic oxide cores for transformers and chokes for power applications. Assessment level A
BS 9930-03.0:1988, IEC 60384-4:1985,QC 300300:1985. Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic componentsSectional specification. Aluminium electrolytic capacitors with solid or non-solid electrolyte
BS 9940-0:1983, IEC 60115-1:1982,QC 400000:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentGeneric specification
BS 9940-01.0:1983, IEC 60115-2:1982,QC 400100:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentSectional specification: fixed low power non-wirewound resistors
BS 9940-01.01:1983, IEC 60115-2-1:1982,QC 400101:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentBlank detail specification: fixed low power non-wirewound resistors. Assessment level E
BS 9940-03.0:1983, IEC 60115-5:1982,QC 400300:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentSectional specification: fixed precision resistors
BS 9940-03.01:1984, IEC 60115-5-1:1983,QC 400301. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentBlank detail specification: fixed precision resistors. Assessment level E
BS 9940-04.0:1984, IEC 60115-6:1983,QC 400400:1983. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentSectional specification: fixed resistor networks with individually measurable resistors
BS 9940-04.01:1984, IEC 60115-6-1:1983,QC 400401. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentBlank detail specification: fixed resistor networks with individually measurable resistors all of equal value and equal dissipation. Assessment level E
BS 9940-04.02:1984, IEC 60115-6-2:1983,QC 400402. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentBlank detail specification: fixed resistor networks with individually measurable resistors of either different resistance values or different rated dissipations. Assessment level E
BS 9940-05.00:1985, IEC 60115-7:1984,QC 400500:1984. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentSectional specification: fixed resistor networks in which not all resistors are individually measurable
BS 9940-05.01:1985, IEC 60115-7-1:1984,QC 400501:1984. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipmentBlank detail specification: fixed resistor networks in which not all resistors are individually measurable. Assessment level E
BS 9970-0:1985, IEC 60747-10:1984,QC 700000:1984. Harmonized system of quality assessment for electronic components. Semiconductor devicesGeneric specification
BS 998:1969. Specification for vacuum salt for butter and cheese making and other food uses
BS 998:1990. Specification for vacuum salt for food use
BS 999:1962. Schedule of tests for coke ovens
BS 9990:2006. Code of practice for non-automatic fire-fighting systems in buildings
BS 9991:2011. Fire safety in the design, management and use of residential buildings. Code of practice
BS 9999:2008. Code of practice for fire safety in the design, management and use of buildings
BS A 101:1969+A3:2012. Specification for general requirements for titanium bolts
BS A 119:1954. Specification for 90° countersunk head steel bolts (UNF threads) for aircraft
BS A 120:1954. Specification for 90° countersunk head corrosion-resisting steel bolts (UNF threads) for aircraft
BS A 211:1961. Specification for 100° countersunk head steel bolts (Unified threads and cruciform recesses) for aircraft
BS A 22:1947. Units of measurement in civil aviation
BS A 226:1965. Specification for steel hexagon head bolts (short thread: Class 3A)
BS A 227:1965. Specification for steel pan head bolts (short thread: Class 3A)
BS A 231:1982, ISO 3353-1976. Specification for runout and lead threads for rolled threads
BS A 233-236:1971. Specification for plain hexagonal thin nut (of Class 3B UNJ thread)
BS A 237-240:1971. Specification for plain hexagonal nut (of Class 3B UNJ thread)
BS A 242; A 243; A 244; A 245:1974. Specification for hexagonal castle nuts (of Class 3B UNJ thread)
BS A 246; A 247; A 248; A 249:1974. Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)
BS A 250; A 251; A 252; A 253:1974. Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)
BS A 272:1977. Specification for Hi-torque speed drive recess: dimensions and gauging for countersunk head fasteners
BS A 273:1978. Specification for gauging practice for 100° countersunk head fasteners for flushness control
BS A 274:1981. Specification for procurement of alloy steel bolts, metric, with a minimum tensile strength of 1100 MPa
BS A 275-A 280:1981+A2:2011. Specification for hexagon self-locking nuts with non-metallic locking inserts. Metric series
BS A 281; A 282 [...]:1981. Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts. Metric series
BS A 287; A 288 [...]:1982. Specification for hexagon socket head cap screws. Metric series
BS A 293:1983. Specification for procurement of self-locking nuts with non-metallic locking element. Metric series
BS A 294:1984, ISO 7403:1983. Specification for spline drive wrenching configuration. Metric series
BS A 295:1985, ISO 7481-1984. Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C
BS A 296:1986, ISO 7913-1985. Specification for tolerances of form and position for bolts and screws. Metric series
BS A 297:1987, ISO 7994-1985. Specification for internal drive, offset cruciform recess (Torq-Set(R)) for rotary fastening devices. Metric series
BS A 298:1988, ISO 8642:1986. Methods of test for self-locking nuts with maximum operating temperature greater than 425°C
BS A 299:1989, ISO 5857:1988. Specification for procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads
BS A 300:1989, ISO 7689:1988. Specification for procurement of alloy steel bolts with strength classification 1 100 MPa and MJ threads
BS A 301:1989, ISO 8168:1988. Procurement of corrosion and heat-resisting steel bolts with strength classification 1100 MPa and MJ threads
BS A 302:1992, ISO 5858:1991. Self-locking nuts with maximum operating temperature less than or equal to 425°C. Procurement specification
BS A 303:1994, ISO 3185:1993. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 304:1994, ISO 3203:1993. Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 305:1994, ISO 7961:1994. Bolts. Test methods
BS A 306:1994, ISO 8280:1993. Rivets, solid, universal head, metallic material, with or without surface treatment. Dimensions
BS A 307:1994, ISO 9254:1993. Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 308:1994, ISO 9255:1993. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 309:1994, ISO 9256:1993. Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 310:1995, ISO 3186:1994. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions
BS A 311:1997, ISO 13921:1996. Aerospace. Screws, 100° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 312:1997, ISO 12260:1996. Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 313:1997, ISO 12261:1996. Areospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 314:1997, ISO 9609:1996. Aerospace. Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/ 600 °C."
BS A 315:1997, ISO 9618:1996. Aerospace. Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120°C, 450 MPa (at ambient temperature)/235°C, 600 MPa (at ambient temperature)/425°C, 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C, 900 MPa (at ambient temperature)/650°C, 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/730°C and 1250 MPa (at ambient temperature)/60"
BS A 31-54:1951+A6:2012. Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
BS A 316:1997, ISO 4147:1997. Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications. 600 MPa (at ambient temperature)/120°C, 600 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/730°C, 1250 MPa (at ambient temperature)/235°C and 1550 MPa (at ambient temperature)/600°C. Di"
BS A 317:1997, ISO 8279:1997. Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications. 600 MPa (at ambient temperature)/120°C, 600 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/730°C, 1250 MPa (at ambient temperature)/235°C and 1550 MPa (at ambient temperature)/600°C. Dimensions
BS A 318:1997, ISO 10096:1997. Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications. 450 MPa (at ambient temperature)/425°C, 600 MPa (at ambient temperature)/235°C, 600 MPa (at ambient temperature)/315°C, 600 MPa (at ambient temperature)/650°C, 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/730°C and 1100 MPa (at ambient temperature)/600°C. Dimensions
BS A 319:1997, ISO 12268:1997. Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425°C, 600 MPa (at ambient temperature)/235°C, 600 MPa (at ambient temperature)/315°C, 600 MPa (at ambient temperature)/650°C, 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/730°C and 1100 MPa (at ambient temperature)/600°C. Dimensions
BS A 320:1997, ISO 12273:1997. Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C, 900 MPa (at ambient temperature)/425°C. Dimensions
BS A 321:1997, ISO 12274:1997. Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C and 900 MPa (at ambient temperature)/425°C. Dimensions
BS A 322:1998, ISO 3202:1997. Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
BS A 323:1998, ISO 4095:1998. Bihexagonal drives. Wrenching configuration. Metric series
BS A 324:1998, ISO 9199:1998. Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/425°C and 1550 MPa (at ambient temperature)/600°C. Dimensions
BS A 325:1998, ISO 245:1998. Lockwire. Diameters
BS A 326:1998, ISO 3230:1998. Rivets, solid, 100° normal countersunk head with dome, metallic material, with or without surface treatment. Dimensions
BS A 327:1998, ISO 13589:1998. Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/425°C and 1550 MPa (at ambient temperature)/600°C. Dimensions
BS A 328-1:1999, ISO 8399-1:1998. Accessory drives and mounting flanges (Metric sizes)Design criteria
BS A 328-2:1999, ISO 8399-2:1998. Accessory drives and mounting flanges (Metric sizes)Dimensions
BS A 329:1999, ISO 3168:1998. Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 330:1999, ISO 12272:1998. Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C and 900 MPa (at ambient temperature)/425°C. Dimensions
BS A 331:1998, ISO 12258:1998. Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa. Dimensions
BS A 332:1999, ISO 9152:1998. Aerospace. Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa. Procurement specification
BS A 333:1999, ISO 3209:1998. Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 334:1999, ISO 3221:1998. Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 335:1999, ISO 3222:1998. Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 336:1999, ISO 3223:1998. Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 337:1999, ISO 3224:1998. Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 338:1999, ISO 3225:1998. Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 339:1999, ISO 7332:1998. Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 340:1999, ISO 9156:1998. Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 341:1999, ISO/TR 12198:1998. Rivets, solid. Materials
BS A 342:1999, ISO 9139:1998. Nuts, plain or slotted (castellated). Procurement specification
BS A 343:1999, ISO 9140:1998. Nuts, plain or slotted (castellated). Test methods
BS A 344:1999, ISO 3191:1998. Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperatures)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 345:1999, ISO 8538:1999. Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C, 1100 MPa (at ambient temperature)/425°C. Dimensions
BS A 346:2000, ISO 3161:1999. UNJ threads. General requirements and limit dimensions
BS A 351:2000, ISO 12288:2000. Rivets, solid, in nickel alloy. Procurement specification
BS A 352:2000, ISO 12290:2000. Rivets, solid, in titanium or titanium alloy. Procurement specification
BS A 353:2000, ISO 13595:2000. Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated. Dimensions
BS A 354:2000, ISO 13596:2000. Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated. Dimensions
BS A 355:2000, ISO 13597:2000. Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated. Dimensions
BS A 356:2000, ISO 13598:2000. Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated. Dimensions
BS A 357:2000, ISO 13599:2000. Inserts, with clearance hole, in metallic material, coated or uncoated. Dimensions
BS A 358-1:2000, ISO 5855-1:1999. MJ threadsGeneral requirements
BS A 358-2:2000, ISO 5855-2:1999. MJ threadsLimit dimensions for bolts and nuts
BS A 358-3:2000, ISO 5855-3:1999. MJ threadsLimit dimensions for fittings for fluid systems
BS A 359:2000, ISO 12278:1999. Nuts, barrel, self-locking, floating, with MJ threads, classifications. 900 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/235°C, 1250 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/235°C. Dimensions
BS A 360:2000, ISO 12280:1999. Retainers, spring, sheet metal, for self-locking barrel nuts. Dimensions
BS A 361:2000, ISO 12281:1999. Rivets, solid, 100° normal countersunk head, in metallic material, with or without surface treatment. Dimensions
BS A 363:2000, ISO 9154:1999. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
BS A 364:2000, ISO 17057:1999. Rivets, solid. Test method
BS A 400:2010. Specification for nuts, plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosion-resisting steel
BS A 55 AND 56:1951+A3:2012. Specifications for grub screws for aeronautical purposes
BS AU 106:1965. Specification for solid rubbers
BS AU 107:1965. Specification for cellular rubber components
BS AU 108:1965. Specification for plain and reinforced hoses of rubber
BS AU 109:1965. Specification for vacuum brake hose (heavy duty) of oil-resistant rubber
BS AU 110:1965. Specification for air pressure rubber brake hose
BS AU 110a:1995. Specification for rubber hoses and hose assemblies for automotive air pressure braking systems
BS AU 112:1965. Specification for methods for the atmospheric exposure testing of rubber
BS AU 113c:1978. Specification for dimensional characteristics of coupling ball for caravans and light trailers
BS AU 114b:1979. Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers
BS AU 116:1965. Specification for dimensions of chassis for 27 ft public service vehicle (double deck)
BS AU 117:1965. Specification for dimensions of chassis for 30 ft public service vehicle (double deck)
BS AU 118:1965. Recommendations for the storage, shipment and maintenance of lead acid batteries for motor vehicles
BS AU 120:1966. Specification for cork rubber gasket materials
BS AU 121:1966. Specification for composition cork gasket materials
BS AU 122:1966. Specification for leathercloths
BS AU 123:1966. Specification for rubberized hair components
BS AU 124:1966. Specification for methods of test for body sealers
BS AU 125:1966. Specification for methods of test for panel damping materials
BS AU 126:1966. Specification for methods of test for steering wheel coverings
BS AU 127:1966. Specification for road vehicle laminated springs
BS AU 138a:1980. Specification for dimensions of 'contact' type couplings for air pressure braking systems on trailers and semi-trailers and their towing vehicles, and the arrangement of these couplings on articulated and drawbar combinations
BS AU 138b:2000. Towing vehicle, trailer and semi-trailer pneumatic braking systems. "Contact" type couplings
BS AU 139:1967. Dimensions for air pressure brake chamber
BS AU 141a:1971. Specification for the performance of diesel engines for road vehicles
BS AU 142:1968. Methods of test for brake linings materials
BS AU 143c:Extract:1984. Specification for symbols for controls, indicators and tell-tales for road vehicles. Print of symbols for reproduction purposes
BS AU 143d:1984, ISO 2575-1982. Specification for symbols for controls, indicators and tell-tales for road vehicles
BS AU 143f:1996, ISO 2575:1995. Specification for symbols for controls, indicators and tell-tales for road vehicles
BS AU 144b:1977. Specification for retreaded car and commercial vehicle tyres
BS AU 144f:1988. Specification for retreaded car and commercial vehicle tyres
BS AU 145a:1972. Specification for reflex-reflecting number plates
BS AU 145b:1989. Specification for retroreflecting number plates
BS AU 145c:1995. Specification for retroreflecting number plates
BS AU 145d:1998. Specification for retroreflecting number plates
BS AU 146b:1970. Specification for standard automatic roller-type coupling for semi-trailers not exceeding 7¼ tons laden weight
BS AU 148-10:1969. Methods of test for motor vehicle paintsResistance to heat and corrosion
BS AU 148-11:1969. Methods of test for motor vehicle paintsResistance to blistering
BS AU 148-12:1969. Methods of test for motor vehicle paintsResistance to accelerated weathering
BS AU 148-13:1969. Methods of test for motor vehicle paintsResistance to deterioration by contact with other materials
BS AU 148-14:1969. Methods of test for motor vehicle paintsResistance to outdoor exposure
BS AU 148-15:1969. Methods of test for motor vehicle paintsResistance to chipping
BS AU 148-2:1969. Methods of test for motor vehicle paintsResistance to continuous salt spray
BS AU 148-3:1969. Methods of test for motor vehicle paintsFlexibility and adhesion
BS AU 148-4:1969. Methods of test for motor vehicle paintsResistance to abrasion
BS AU 148-5:1969. Methods of test for motor vehicle paintsGloss measurement
BS AU 148-6:1969. Methods of test for motor vehicle paintsHardness
BS AU 148-9:1969. Methods of test for motor vehicle paintsResistance to dry heat
BS AU 149a:1980. Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal)
BS AU 150b:1984. Specification for automotive V-belts and pulleys
BS AU 151:1970. Specification for electrical cable connectors: blade type
BS AU 152:1970. Specification for rear marking plates for vehicles
BS AU 153:1970. Specification for fuel injection high pressure pipe fittings
BS AU 154:1970. Specification for hydraulic trolley jacks
BS AU 154a:1989. Specification for hydraulic trolley jacks
BS AU 155a:1973. Specification for headlamps for pedal cycles
BS AU 156:1971. Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles
BS AU 157b:1982. Specification for children's restraining devices
BS AU 159c:1981. Specification for repairs to tyres for motor vehicles used on the public highway
BS AU 159e:1990. Specification for repairs to tyres for motor vehicles used on the public highway
BS AU 159f:1997. Specification for repairs to tyres for motor vehicles used on the public highway
BS AU 16:1963. Specification for electrical cable connector: bullet type
BS AU 160c:1971. Specification for seat belt assemblies for motor vehicles
BS AU 161:1973. Specification for vehicle lifts
BS AU 161-1b:1983. Vehicle liftsSpecification for fixed lifts
BS AU 161-2:1989. Vehicle liftsSpecification for mobile lifts
BS AU 162a:1976. Specification for headlamp optical aiming devices
BS AU 163a:1985, ISO 3583-1984. Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles
BS AU 164:1977, ISO 3784-1976. Specification for measurement of impact velocity in collision tests on road vehicles
BS AU 165:1977. Specification for original equipment passenger car jacks
BS AU 165a:1990. Specification for performance requirements for original equipment jacks for passenger cars and light vans
BS AU 166:1977, ISO 3584-1975. Specification for road vehicles - mounting of mechanical coupling devices on rear cross members of trucks
BS AU 167:1978, ISO 4024-1977. Specification for road vehicles - low tension cable connections for ignition coils
BS AU 168:1978. Method for determination of the windscreen fogging characteristics of organic trim materials in motor vehicles
BS AU 169:1978, ISO 3795-1976. Method for determination of burning behaviour of interior materials for motor vehicles
BS AU 169a:1992, ISO 3795:1989. Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry
BS AU 16a:1989. Specification for electrical cable connectors (17.5 A maximum continuous rating)
BS AU 170:1979. Methods for measurement of reflectance of rear view mirrors
BS AU 171:1980. Specification for alternative steering controls
BS AU 172a:1979. Specification for performance requirements for accessory jacks for passenger cars
BS AU 172c:1990. Specification for performance requirements for accessory jacks for vehicles
BS AU 173:1979. Definitions for a three-dimensional reference system and fiducial marks
BS AU 174-1:1979, ISO 4926-1978. Hydraulic brake systems, using non-petroleum base brake fluids for road vehiclesSpecification for non-petroleum base reference fluids
BS AU 174-2:1985, ISO 4925:1978. Hydraulic brake systems, using non-petroleum base brake fluids for road vehiclesSpecification for non-petroleum base brake fluid
BS AU 175-1b:1983, ISO 3779:1983. Vehicle identification numbers (VIN)Specification for content and structure
BS AU 175-2b:1983, ISO 3780-1983. Vehicle identification numbers (VIN)Specification for world manufacturer identifier (WMI) codes
BS AU 175-3b:1983, ISO 4030:1983. Vehicle identification numbers (VIN)Specification for location and attachment
BS AU 175-4a:1997. Vehicle identification numbers (VIN)Specification for a visible vehicle identification number
BS AU 176:1980, ISO 4513:1978. Method for establishment of eyellipses for driver's eye location
BS AU 177a:1980. Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)
BS AU 178:1980. Specification for road vehicle safety glass
BS AU 178a:1992. Specification for road vehicle safety glass
BS AU 179:1981. Specification for dimensional codes for passenger cars
BS AU 180-1:1983. Brake liningsMethod for measurement of compressibility of brake lining material
BS AU 180-2:1982, ISO 6311:1980. Brake linings.Method for measurement of internal shear strength of lining material
BS AU 180-3:1982. Brake liningsMethod for measurement of shear strength of disc brake pad and drum brake shoe assemblies
BS AU 180-4:1982, ISO 6313:1980. Brake linings.Method for determining effects of heat on dimensions and form of disc brake pads
BS AU 180-5:1983, ISO 6314:1980. Brake linings.Method for determining resistance to water, saline solution, oil and brake fluid of brake lining material
BS AU 180-6:1982, ISO 6315:1980. Brake linings.Method for assessment of seizure to ferrous mating surface due to corrosion
BS AU 181:1982. Specification for interface dimensions for demountable vehicle body systems
BS AU 182:1982. Specification for plastics safety glazing materials for use in road vehicles
BS AU 183:1983. Specification for passive seat belt systems
BS AU 184:1982, ISO 4100-1980. Specification for world parts manufacturer identifier code (WPMI) for road vehicles
BS AU 185:1983. Specification for seat belt booster cushions
BS AU 186a:1983. Specification for carry cot restraints
BS AU 187:1983. Specification for tow rope assemblies for towing passenger cars and light vans
BS AU 187:2000. Tow rope assemblies for towing passenger cars and light vans
BS AU 188:1983, ISO 5422-1982. Specification for anchorages for towing ropes, cables or bars for road vehicles
BS AU 189:1983, ISO 4138-1982. Method of test for steady state cornering behaviour for road vehicles
BS AU 190:1983. Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg
BS AU 191:1983, ISO 6813-1981. Glossary of terms for road vehicle collisions
BS AU 192:1983, ISO 7237-1981. Glossary of terms for masses and dimensions of caravans
BS AU 193:1983. Specification for replacement motor cycle and moped exhaust systems
BS AU 193a:1990. Specification for replacement motor cycle and moped exhaust systems
BS AU 194:1984. Specification for performance of electrical connections between towing vehicles and trailers
BS AU 195:1984, ISO 4009-1977. Specification for mounting electrical connections on rear cross members of towing vehicles
BS AU 195a:1991, ISO 4009:1989. Specification for mounting electrical connections on rear cross members of towing vehicles
BS AU 196:1984. Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles
BS AU 197:1984. Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal)
BS AU 198:1984. Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary)
BS AU 199:1984, ISO 4040-1983. Specification for location of hand controls, indicators and tell-tales in passenger cars
BS AU 199a:1997, ISO 4040:1997. Specification for location of hand controls, indicators and tell-tales in passenger cars
BS AU 1b:1977, ISO 337-1973. Specification for dimensions of '50' fifth wheel king pin for semi-trailers
BS AU 1c:1989, ISO 337-1981. Specification for dimensions of '50' fifth wheel king pin for semi-trailers
BS AU 200-1a:1984. Spray reducing devices for heavy goods vehiclesSpecification for design of containment devices
BS AU 200-2a:1984. Spray reducing devices for heavy goods vehiclesSpecification for performance of suppression material and devices, and air/water separating material and devices
BS AU 201-1:1985, ISO 7588-1983. Relays and flashersSpecification for mounting and positioning dimensions of male tabs and socket apertures for relays and flashers for road vehicles
BS AU 201-2:1985, ISO 7880-1984. Relays and flashers.Specification for arrangement and functional attribution of relay terminals for road vehicles
BS AU 202a:1985. Specification for rearward-facing restraining devices for infants for use in road vehicles
BS AU 202b:1995. Specification for rearward-facing restraint systems for infants, for use in road vehicles
BS AU 203:1985, ISO 7653-1985. Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commerial road vehicles
BS AU 203a:1988, ISO 7653-1985. Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commercial road vehicles
BS AU 205:1986, ISO 7975:1985. Method of test for effect of braking on steady state cornering behaviour of road vehicles
BS AU 206-1:1986, ISO 4092-1984. Diagnostic systems for road vehicles.Glossary
BS AU 206-2:1986, ISO 7639-1985. Diagnostic systems for road vehicles.Specification for graphical symbols for diagnostic testers
BS AU 206-3:1986, ISO 7342-1982. Diagnostic systems for road vehicles.Specification for general requirements for testing ignition systems
BS AU 206-4:1986, ISO 8093-1985. Diagnostic systems for road vehicles.Specification for general requirements for testing electronic systems
BS AU 207:1986. Specification for dimensions of car radio installation space
BS AU 208:1986. Methods for assessment of sticking of automobile clutch facings
BS AU 209-0:1996. Vehicle securityGuide to the application of security devices/systems to vehicles
BS AU 209-1:1986. Vehicle security.Specification for mechanical locking systems for passenger cars and car derived vehicles
BS AU 209-1a:1992. Vehicle securitySpecification for locking systems for passenger cars and car derived vehicles
BS AU 209-2:1988. Vehicle securitySpecification for security systems against theft of in-car equipment for entertainment and communication purposes
BS AU 209-3:1988. Vehicle security.Specification for security marking of glazing for passenger cars and car derived vehicles
BS AU 209-4a:1995. Vehicle securitySpecification for security glazing for passenger cars and car derived vehicles
BS AU 209-5a:1988. Vehicle securitySpecification for central power locking systems for passenger cars and car derived vehicles
BS AU 209-5b:1996. Vehicle securitySpecification for central power locking systems for passenger cars and car derived vehicles
BS AU 209-6:1988. Vehicle securitySpecification for dead locking systems for passenger cars and car derived vehicles
BS AU 209-6a:1996. Vehicle securitySpecification for dead locking systems for passenger cars and car derived vehicles
BS AU 209-7:1993. Vehicle security.Specification for locking systems for goods vehicle driver's compartments
BS AU 209-8:1997. Vehicle securitySpecification for locking systems for goods vehicle load compartments
BS AU 21:1964. Specification for dimensions of a distributor drive end
BS AU 210-1:1987. Drawbars for caravans and light trailers.Method of calculation for the mechanical strength of steel drawbars
BS AU 210-2:1994. Drawbars for caravans and light trailers.Specification for the design of aluminium drawbars and chassis
BS AU 211:1987, ISO 8719-1986. Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses
BS AU 213:1987, ISO 8703:1986. Specification for calculation of forces on control devices for inertia braking of caravans and light trailers
BS AU 214-2:1988, ISO 7646-1986. Gearbox flanges.Specification for dimensions for type A gearbox flanges for commercial vehicles and buses
BS AU 214-3:1988, ISO 7647-1986. Gearbox flanges.Specification for dimensions for type S gearbox flanges for commercial vehicles and buses
BS AU 214a-1:1987, ISO 8667:1986. Gearbox flangesSpecification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses
BS AU 215-1:1987, ISO 7706-1985. Power take offs (PTOs).Specification for dimensions for clearance envelope for commercial road vehicles
BS AU 215-2:1987, ISO 7804-1985. Power take offs (PTOs).Specification for dimensions of side openings for commercial road vehicles
BS AU 215-3:1988, ISO 7707-1986. Power take offs (PTOs)Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles
BS AU 216-1:1987, ISO 7309-1985. Hydraulic brake systems using petroleum base brake fluids for road vehiclesSpecification for petroleum base reference fluid
BS AU 217-1a:1987. Maximum road speed limiters for motor vehiclesSpecification for installed requirements
BS AU 217-2:1989. Maximum road speed limiters for motor vehiclesSpecification for system and component requirements
BS AU 218:1987. Specification for automotive synchronous belt drives
BS AU 219:1988, ISO 8755:1986. Specification for dimensions of 40 mm drawbar couplings between commercial road vehicles and trailers
BS AU 220:1988, ISO 1102:1986. Specification for dimensions of 50 mm drawbar couplings between commercial road vehicles and trailers
BS AU 221:1988. Specification for material and performance requirements for air reservoirs for road vehicles
BS AU 222:1988, ISO 7629:1987. Method of evaluating surface and material flaws of disc brake pads after testing
BS AU 223:1988. Specification for vehicle support stands for cars and light vans
BS AU 223a:1995. Specification for vehicle support stands for cars and light vans
BS AU 223a:2006. Design, construction performance and marking of vehicle support stands for cars and light vans. Specification
BS AU 224a:1988. Specification for portable wheel ramps for cars and light vans
BS AU 224b:1997. Specification for portable wheel ramps for cars and light vans
BS AU 225:1988, ISO 7803:1987. Specification for dimensions of steering ball joints for commercial road vehicles
BS AU 226:1988, ISO 7648:1987. Specification for nominal dimensions and tolerances of flywheel housings for reciprocating internal combustion engines
BS AU 227:1988, ISO 7467:1987. Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses
BS AU 228-1:1989, ISO 6487:1987. Impact tests on road vehiclesSpecification for measurement techniques and general instrumentation
BS AU 228-1a:2000, ISO 6487:2000. Impact tests on road vehiclesSpecification for measurement techniques and general instrumentation
BS AU 228-2:1989, ISO 8721:1987. Impact tests on road vehicles.Specification for measurement techniques using optical instrumentation
BS AU 229:1989, ISO 9128:1987. Specification for graphical symbols to designate brake fluid types in road vehicles
BS AU 230:1989, ISO 7401:1988. Methods of test for lateral transient response behaviour of passenger cars
BS AU 231:1989, ISO 4141:1988. Specification for seven-core connecting cable for road vehicles
BS AU 232:1989, ISO 8854:1988. Methods of test and general requirements for road vehicle alternators with regulators
BS AU 233:1989, ISO 9458:1988. Specification for starter motor electrical connections for passenger cars
BS AU 234:1989, ISO 8856:1988. Methods of test and general requirements for road vehicle starter motors
BS AU 235-1:1989, ISO 8717:1988. Fifth wheel couplings for commercial vehiclesSpecification for test conditions and strength requirements
BS AU 235-2:1991, ISO 8716:1988. Fifth wheel couplings for commercial vehiclesMethod of testing strength of coupling pins
BS AU 236:1990. Specification for circular electronic tachographs for road vehicles
BS AU 237-1:1990. Jumper lead sets for automotive starting.Specification for jumper lead sets for light domestic duty
BS AU 237a:1993. Specification for light domestic duty jumper lead sets for automotive starting
BS AU 238:1991, ISO 7227:1987. Glossary of terms for road vehicle lighting and light signalling devices
BS AU 239:1991, ISO 8718:1988. Method of testing strength of drawbar couplings and eyes for hinged drawbars
BS AU 24:1964. Specification for towing connections for trailers of 2-5 tons gross weight
BS AU 241:1991, ISO 1726:1989. Specification for mechanical coupling between tractors and semi-trailers: interchangeability
BS AU 242:1991. Code of practice for automotive windscreen repair
BS AU 242a:1998. Automotive windscreen repair. Code of practice
BS AU 243-1:1991, ISO 7637-0:1990. Methods of test for electrical disturbance by conduction and couplingGeneral
BS AU 243-2:1991, ISO 7637-1:1990. Methods of test for electrical disturbance by conduction and coupling.Electrical transient conduction along supply lines only on passenger cars and light commercial vehicles with 12 V supply
BS AU 243-3:1991, ISO 7637-2:1990. Methods of test for electrical disturbance by conduction and coupling.Electrical transient conduction along supply lines only on commercial vehicles with 24 V supply
BS AU 244:1992, ISO 8855:1991. Glossary of terms for road vehicle dynamics and road holding ability
BS AU 245:1992, ISO 8035:1991. Specification for front towing attachments for commercial road vehicles and buses over 3.5 t
BS AU 246:1992, ISO 10392:1992. Method for determination of the centre of gravity of road vehicles with two axles
BS AU 247:1993, ISO 9815:1992. Method of test for lateral stability of passenger car/trailer combinations
BS AU 248:1993, ISO 9981:1990. Specification for automotive V-ribbed belt drives. Dimensions of pulleys and belts of PK profile
BS AU 249:1993, ISO 7649:1991. Specification for clutch housings for reciprocating internal combustion engines. Nominal dimensions and tolerances
BS AU 24a:1989. Specification for towing connections for trailers up to 5000 kg gross mass
BS AU 25:1964. Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle
BS AU 250:1993, ISO 7651:1991. Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses
BS AU 251:1994. Specification for performance of automotive laminated windscreen repair systems
BS AU 252:1993, ISO 8123:1991. Specification for diametral pitch starter motor pinions for road vehicles
BS AU 253:1993, ISO 11406:1993. Specification for interchangeability of mechanical coupling between towing vehicles with rear-mounted couplings and drawbar trailers
BS AU 255-1:1994, ISO 6722-3:1993. Road vehicle unscreened low tension cablesSpecification for conductor sizes and dimensions for thick walled insulated cables
BS AU 255-2:1994, ISO 6722-4:1993. Road vehicle unscreened low tension cablesSpecification for conductor sizes and dimensions for thin walled insulated cables
BS AU 256:1994, ISO 9816:1993. Passenger cars. Power-off reactions of a vehicle in a turn. Open-loop test method
BS AU 257:1995. Code of practice for remanufacture of spark and compression ignition engines
BS AU 257:2002. Code of practice for remanufacture of spark and compression ignition engines
BS AU 258:1995. Specification for elasticated straps
BS AU 259:1995, ISO 12667:1993. Specification for components for commercial vehicles and buses. Cross-tooth propeller shaft flanges, type T
BS AU 26:1964. Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle
BS AU 260-4:1995, ISO 7876-4:1994. Fuel injection equipment. VocabularyHigh-pressure pipes and end-connections
BS AU 261:1995, ISO 2974:1994. Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone
BS AU 262-1:1995, ISO 6550-1:1994. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housingM14 x 1, 25 glow-plugs
BS AU 262-2:1995, ISO 6550-2:1994. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housingM12 x 1.25 glow-plugs
BS AU 262-3:1997, ISO 6550-3:1996. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housingM 10 glow plugs
BS AU 263:1995, ISO 2347:1994. Road vehicles. M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing
BS AU 264:1995, ISO 2345:1994. Road vehicles. M18 X 1,5 spark-plugs with conical seating and their cylinder head housing
BS AU 265-1:1997, ISO 6518-1:1997. Road vehicles. Ignition systemsVocabulary
BS AU 265-2:1995, ISO 6518-2:1995. Road vehicles. Ignition systemsElectrical performance and function test methods
BS AU 266-1:1996, ISO 11154-1:1995. Specification for roof load carriersRoof bars
BS AU 267:1998. Code of practice for breakaway cables and secondary couplings
BS AU 268:2003. Passenger cars and light vans. Commercial towing pole assemblies. Specification
BS AU 27:1964. Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle
BS AU 28:1964. Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle
BS AU 29:1964. Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle
BS AU 2a:1970. Specification for dimensions of 3½ - 4½ in diameter fifth wheel king pin for use with extra heavy duty semi-trailers
BS AU 3:1970. Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers
BS AU 30b:1970. Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to 14¾ tons laden weight
BS AU 31:1963. Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles)
BS AU 32:1964. Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (heavy commercial vehicles)
BS AU 40-1:1963. Specification for motor vehicle lighting and signalling equipment.Side, rear, parking, marker and stop lamps, and direction indicators
BS AU 40-2:1965. Specification for motor vehicle lighting and signalling equipment.Reflex reflectors for vehicles, including cycles
BS AU 40-3:1966. Specification for motor vehicle lighting and signalling equipment.Headlamps with prefocused filament lamps
BS AU 40-4a:1966. Specification for motor vehicle lighting and signalling equipmentSealed beam headlamps
BS AU 40-6:1968. Specification for motor vehicle lighting and signalling equipment.Headlamps for mechanically assisted pedal cycles (mopeds)
BS AU 47:1965. Specification for advance warning triangle to indicate temporary obstructions
BS AU 48a:1971. Specification for seat belt anchorage points
BS AU 5:1963. Specification for dimensions of a 'contact' type coupling for vacuum and pressure braking systems on trailers and semi-trailers
BS AU 50- 3:Section 1:1977. Specification for tyres and wheels. Valves.Valve dimensions
BS AU 50-1.0.1:1999, ISO 13326:1998. Tyres and wheels. Tyres. GeneralMethod of test for measuring tyre uniformity
BS AU 50-1.0d:1998. Tyres and wheels. TyresGeneral
BS AU 50-1.1.1:1982. Tyres and wheels. Tyres. Car tyresSpecifications for sizes, loads and inflation pressures
BS AU 50-1.1.1a:1995, ISO 4000-1:1994. Tyres and wheels. Tyres. Car tyresSpecification for metric series tyres
BS AU 50-1.1.1b:1996, ISO 4000-1:1995. Tyres and wheels. Tyres. Car tyresSpecification for metric series tyres
BS AU 50-1.1.1c:2001, ISO 4000-1:2001. Tyres and wheels. Tyres. Car tyresTyres (metric series)
BS AU 50-1.1.2:2001, ISO 17269:2000. Tyres and wheels. Tyres. Car tyresMethods for measuring rolling circumference. Loaded new tyres
BS AU 50-1.1.3:1993, ISO 8767:1992. Tyres and wheels. Tyres. Car tyresMethod of measuring rolling resistance
BS AU 50-1.1.4:1994, ISO 10191:1993. Tyres and wheels. Tyres. Car tyresMethod of test for verifying tyre capabilities
BS AU 50-1.1.4b:1996, ISO 10191:1995. Tyres and wheels. Tyres. Car tyresMethod of test for verifying tyre capabilities
BS AU 50-1.2.1:1991. Tyres and wheels. Tyres. Commercial vehicle tyresSpecifications for sizes, loads, inflation pressures and rims for commercial vehicle tyres
BS AU 50-1.2.1a:1995, ISO 4209-1:1993. Tyres and wheels. Tyres. Commercial vehicle tyresSpecification for metric series tyres
BS AU 50-1.2.1b:2001, ISO 4209-1:2001. Tyres and wheels. Tyres. Commercial vehicle tyresTyres
BS AU 50-1.2.2:1991, ISO 9112:1991. Tyres and wheels. Tyres. Commercial vehicle tyres.Method of measuring tyre rolling circumference. Loaded new tyres
BS AU 50-1.2.3:1993, ISO 9948:1992. Tyres and wheels. Tyres. Commercial vehicle tyres.Method of measuring rolling resistance
BS AU 50-1.2.4:1994, ISO 10454:1993. Tyres and wheels. Tyres. Commercial vehicle tyres.Method of test for verifying tyre capabilities
BS AU 50-1.3.1:1989, ISO 4250-1:1988. Tyres and wheels. Tyres. Off-the-road tyres.Specification for narrow and wide base tyre designations and dimensions
BS AU 50-1.3.1a:1991, ISO 4250-1:1988. Specification for tyres and wheels. Tyres. Off-the-road tyresSpecification for narrow and wide base tyre designations and dimensions
BS AU 50-1.3.2:1989, ISO 4250-2:1987. Tyres and wheels. Tyres. Off-the-road tyres.Specification for narrow and wide base tyre loads and inflation pressures
BS AU 50-1.3.2a:1991, ISO 4250-2:1991. Specification for tyres and wheels. Tyres. Off-the-road tyresSpecification for narrow and wide base tyre loads and inflation pressures
BS AU 50-1.3.2b:1997, ISO 4250-2:1995. Specification for tyres and wheels. Tyres. Off-the-road tyresSpecification for narrow and wide base tyre loads and inflation pressures
BS AU 50-1.3.3:1996, ISO 10571:1995. Specification for tyres and wheels. Tyres. Off-the-road tyresSpecification for tyres for mobile cranes and similar specialized machines
BS AU 50-1.4.1:1989, ISO 4251-1:1988. Tyres and wheels. Tyres. Agricultural tractor and machine tyres.Specification for designations and dimensions for existing (inch) series tyres
BS AU 50-1.4.1a:1993, ISO 4251-1:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for designations and dimensions for ply rating marked series tyres
BS AU 50-1.4.1b:1998, ISO 4251-1:1998. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for designation and dimensions for ply rating marked series tyres
BS AU 50-1.4.2:1989, ISO 4251-2:1987. Tyres and wheels. Tyres. Agricultural tractor and machine tyres.Specification for load ratings for existing (inch) series tyres
BS AU 50-1.4.2a:1993, ISO 4251-2:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for load ratings for ply rating marked series tyres
BS AU 50-1.4.2b:1999, ISO 4251-2:1998. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for load ratings for ply rating marked series tyres
BS AU 50-1.4.3:1989, ISO 4251-4:1980. Tyres and wheels. Tyres. Agricultural tractor and machine tyres.Specification for classification codes and nomenclature for existing (inch) series tyres
BS AU 50-1.4.3a:1992, ISO 4251-4:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for classification codes and nomenclature for ply rating marked series tyres
BS AU 50-1.4.4:1989, ISO 4251-5:1988. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for existing (inch) series of diagonal tyres for log skidders
BS AU 50-1.4.4b:1992, ISO 4251-5:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for ply rating marked series tyres for log skidders
BS AU 50-1.4.5:1992, ISO 7867-1:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for designations, dimensions and marking for metric series tyres
BS AU 50-1.4.5a:1996, ISO 7867-1:1996. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for designations, dimensions, marking and tyre/rim coordination for metric series tyres
BS AU 50-1.4.6:1996, ISO 7867-2:1996. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for service description and load ratings for metric series tyres
BS AU 50-1.4.7:1993, ISO 8664:1992. Tyres and wheels. Tyres. Agricultural tractor and machine tyresSpecification for marking, dimensions, load ratings and reference speeds for service description marked tyres for agricultural tractor drive wheels
BS AU 50-1.5.1:1994. Tyres and wheels. Tyres. Industrial vehicle tyresSpecification for code-designated series tyres
BS AU 50-1.5.2:1994, ISO 3739-1:1992. Tyres and wheels. Tyres. Industrial vehicle tyres.Specification for pneumatic tyres (metric series) on 5° tapered or flat base rims: designation, dimensions and marking
BS AU 50-1.5.3:1994, ISO 3739-2:1992. Tyres and wheels. Tyres. Industrial vehicle tyres.Specification for pneumatic tyres (metric series) on 5° tapered or flat base rims: load ratings
BS AU 50-1.5.4a:1994, ISO 10499:1991. Tyres and wheels. Tyres. Industrial vehicle tyresSpecification for solid tyres (metric series) for pneumatic tyre rims: designation, dimensions and marking
BS AU 50-1.5.5:1998, ISO 10499-2:1998. Tyres and wheels. Tyres. Industrial vehicle tyresSpecification for solid tyres (metric series) for pneumatic tyre rims. Load ratings
BS AU 50-1.5.6:1994, ISO 10500:1991. Tyres and wheels. Tyres. Industrial vehicle tyresSpecification for cylindrical and conical base rubber solid tyres (metric series), designation, dimensions and marking
BS AU 50-1.6.1:1989. Tyres and wheels. Tyres. Motorcycle tyresSpecification for general requirements for designations, dimensions and load ratings for metric series tyres
BS AU 50-1.6.1b:1995, ISO 5751-1:1994. Tyres and wheels. Tyres. Motorcycle tyresSpecification for general requirements and design guide for designations, dimensions and load ratings for metric series tyres
BS AU 50-1.6.1c:2002, ISO 5751-1:2001. Tyres and wheels. Tyres. Motorcycle tyresSpecification of general requirements and design guide for designations, dimensions and load ratings for metric series tyres
BS AU 50-1.6.2:1989, ISO 5751-2:1988. Tyres and wheels. Tyres. Motorcycle tyresSpecification for designations, dimensions and load ratings for metric series 100, 90, 80, 70 and 60 tyres
BS AU 50-1.6.2b:1995, ISO 5751-2:1994. Tyres and wheels. Tyres. Motorcycle tyresSpecification for designations, dimensions and load ratings for metric series 100, 90, 80, 70, 60, 55 and 50 tyres
BS AU 50-1.6.2c:2002. Tyres and wheels. Tyres. Motorcycle tyresSpecification for designations, dimensions and load ratings for metric series 100, 90, 80, 70, 60, 55 and 50 tyres
BS AU 50-1.6.3:1991, ISO 6054-1:1990. Tyres and wheels. Tyres. Motorcycle tyresSpecification for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres
BS AU 50-1.6.3a:1995, ISO 6054-1:1994. Tyres and wheels. Tyres. Motorcycle tyresSpecifications for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres
BS AU 50-1.6.6:1993, ISO 10231:1992. Tyres and wheels. Tyres. Motorcycle tyresMethod of test for verifying tyre capabilities
BS AU 50-1.6.6b:1998, ISO 10231:1997. Tyres and wheels. Tyres. Motorcycle tyresMethod of test for verifying tyre capabilities
BS AU 50-1.6.7:1998, ISO 13327:1998. Tyres and wheels. Tyres. Motorcycle tyresMethod of test for measuring rolling resistance
BS AU 50-1.6.8:2000, ISO 13328:2000. Tyres and wheels. Tyres. Motorcycle tyresMethod of measuring tyre rolling circumference for new tyres under loaded conditions
BS AU 50-1.7.1:1989. Tyres and wheels. Tyres. Moped tyresSpecification for tyre designations, dimensions and load ratings
BS AU 50-1.8:1989. Tyres and wheels. Tyres.Code of practice for the storage of tyres, inner tubes and flaps
BS AU 50-1-0c:1977. Tyres and wheels. TyresGeneral
BS AU 50-1-2e:1986. Tyres and wheels. TyresCommercial vehicle tyres
BS AU 50-1-2f:1987. Tyres and wheels. TyresSpecification for sizes, loads, inflation pressures and rims for commercial vehicle tyres
BS AU 50-1-3c:1981. Tyres and wheels. TyresOff-the-road tyres
BS AU 50-1-4d:1977. Tyres and wheels. TyresAgricultural vehicle tyres
BS AU 50-1-5d:1977. Tyres and wheels. TyresIndustrial vehicle tyres
BS AU 50-1-6b:1977. Tyres and wheels. TyresMotor cycle and scooter tyres
BS AU 50-2.0a:1979. Tyres and wheels. Wheels and rimsGeneral (including terms and definitions, and construction and workmanship)
BS AU 50-2.0b:2000, ISO 3911:1998. Tyres and wheels. Wheels and rimsGeneral (including vocabulary, designation and marking)
BS AU 50-2.2a:1984. Tyres and wheels. Wheels and rimsSpecification for dimensions of wheel naves and hub centres for commercial vehicles
BS AU 50-2.3:1994. Tyres and wheels. Wheels and rimsSpecification for road-wheel nuts, studs and bolts for commercial vehicles
BS AU 50-2.5c:1996. Tyres and wheels. Wheels and rimsSpecification for road wheels manufactured wholly or partly of cast light alloy for passenger cars
BS AU 50-2.6a:1983. Tyres and wheels. Wheels and rimsSpecification for road wheels manufactured wholly or partly of light alloy for mopeds and motor cycles
BS AU 50-2.7a:1995. Tyres and wheels. Wheels and rimsCode of practice for the selection and care of tyres and wheels for commercial vehicles
BS AU 50-2.8a:1985. Tyres and wheels. Wheels and rimsCode of practice for the selection and care of wheels for passenger cars (including caravans and light trailers)
BS AU 50-2-1b:1980. Tyres and wheels. Wheels and rimsRim profiles and dimensions (including openings for valves)
BS AU 50-2-5b:1976. Tyres and wheels. Wheels and rimsRoad wheels manufactured wholly or partly of cast light alloy for passenger cars
BS AU 50-2-7:1987. Tyres and wheels. Wheels and rimsCode of practice for the selection and care of wheels for commercial vehicles
BS AU 50-3.1b:1999, ISO 9413:1998. Tyres and wheels. ValvesSpecification for valve dimensions and designation
BS AU 50-3.1c:2001, ISO 9413:1998. Tyres and wheels. ValvesTyre valves. Dimensions and designation
BS AU 50-3.1e:2004, ISO 9413:1998. Tyres and wheels. ValvesDimensions, designation, valve pressure ratings by use and torque for clamp-in valves
BS AU 50-3.2:1977, ISO 4570/I-1977. Tyres and wheels. ValvesTyre valve threads 5V1, 5V2, 6V1 and 8V1
BS AU 50-3.2a:2002. Tyres and wheels. ValvesTyre valve threads
BS AU 50-3.3:1980, ISO 4570/II-1979. Tyres and wheels. ValvesTyre valve threads 9V1, 10V2, 12V1 and 13V1
BS AU 50-3.4a:1980, ISO 4570/3-1980. Tyres and wheels. ValvesTyre valve threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1 and 20V1
BS AU 50-3.5:1983, ISO 7442-1982. Tyres and wheels. ValvesDimensions for ISO core chamber No. 1 for tyre inflation valves
BS AU 50-3.6:1982, ISO 6762-1981. Tyres and wheels. ValvesDimensions for ISO core chamber No. 2 for tyre inflation valves
BS AU 50-3.7:1985. Tyres and wheels. ValvesCode of practice for the selection and care of tyre inflation valves for passenger cars (including caravans and light trailers)
BS AU 50-3.8:1985. Tyres and wheels. ValvesCode of practice for the selection and care of tyre inflation valves for commercial vehicles
BS AU 50-3-1a:1985. Tyres and wheels. ValvesSpecification for valve dimensions
BS AU 50-4.1.1:1995, ISO 4000-2:1994. Tyres and wheels. Rim profiles and dimensions. Car rimsSpecification for metric series rims
BS AU 50-4.1.1a:2001, ISO 4000-2:2001. Tyres and wheels. Rim profiles and dimensions. Car rimsSpecification for metric series rims
BS AU 50-4.2.1:1995, ISO 4209-2:1993. Tyres and wheels. Rim profiles and dimensions. Commercial vehicle rimsSpecification for metric series rims
BS AU 50-4.2.1a:2002, ISO 4209-2:2001. Tyres and wheels. Rim profiles and dimensions. Commercial vehicle rimsSpecification for metric series rims
BS AU 50-4.3.1:1991, ISO 4250-3:1987. Tyres and wheels. Rim profiles and dimensions. Off-the-road rimsSpecification for narrow and wide base off-the-road vehicle rims
BS AU 50-4.3.1a:1998, ISO 4250-3:1997. Tyres and wheels. Rim profiles and dimensions. Off-the-road rimsSpecification for narrow and wide base off-the-road vehicle rims
BS AU 50-4.4.1:1991, ISO 4251-3:1985. Tyres and wheels. Rim profiles and dimensions. Agricultural tractor and machine rimsSpecification for existing (inch) series rims
BS AU 50-4.4.1a:1995, ISO 4251-3:1994. Tyres and wheels. Rim profiles and dimensions. Agricultural tractor and machine rimsSpecification for ply-rating marked series rims
BS AU 50-4.5.1:1995. Tyres and wheels. Rim profiles and dimensions. Industrial vehicle rimsSpecification for rim profiles and dimensions for code-designated series tyres
BS AU 50-4.5.2:1996, ISO 3739-3:1995. Tyres and wheels. Rim profiles and dimensions. Industrial vehicle rimsSpecification for rim profiles and dimensions for metric series pneumatic tyres and solid tyres for pneumatic tyre rims
BS AU 50-4.6.2:1991, ISO 5751-3:1988. Tyres and wheels. Rim profiles and dimensions. Motorcycle rimsSpecification for metric series 100, 90, 80, 70 and 60 rims
BS AU 50-4.6.2a:1995. Tyres and wheels. Rim profiles and dimensions. Motorcycle rimsSpecification for metric series 100, 90, 80, 70, 60, 55 and 50 rims
BS AU 50-4.6.2b:1999, ISO 5751-3:1999. Tyres and wheels. Rim profiles and dimensions. Motorcycle rimsSpecification for metric series 100, 90, 80, 70, 60, 55 & 50 rims
BS AU 50-4.6.3:1991, ISO 6054-2:1990. Tyres and wheels. Rim profiles and dimensions. Motorcycle rims.Specification for code designated series (diameter codes 4 to 12) rims
BS AU 50-4.7.1:1991, ISO 5995-2:1982. Tyres and wheels. Rim profiles and dimensions. Moped rimsSpecification for moped rims
BS AU 61:1964. Specification for hydraulic governor for size N fuel injection pump
BS AU 68:1964. Specification for fuel injection low pressure pipe fittings
BS AU 69:1965. Specification for dimensions of taper shaft ends
BS AU 71:1965. Specification for envelope dimensions for ignition coils
BS AU 7a:1983. Specification for colour code for road vehicle electrical cables
BS AU 88a:1985. Recommendations for ratings for light duty cables for automobile use
BS AU 89:1965. Specification for anodised aluminium for automobile use
BS AU 90:1965. Specification for soft solders for automobile use
BS AU 91:1965. Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)
BS B 100:1992. Procedure for inspection, testing and acceptance of wrought copper alloys
BS B 23:1991. Specification for copper-aluminium-nickel-iron alloy rods, sections, forging stock and forgings
BS B 24:1991. Specification for copper-tin-phosphorous alloy rods and sections
BS B 25:1991. Specification for copper-nickel-silicon alloy rods, sections, forging stock and forgings (heat treated)
BS B 26:1991. Specification for copper-nickel-silicon alloy rods and sections (cold worked and heat treated)
BS B 27:1991. Specification for copper-zinc-aluminium-nickel-silicon alloy tube
BS B 28:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated (W) and precipitated)
BS B 29:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: quarter hard (W(1/4H)) and precipitated)
BS B 30:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard (W(1/2H)) and precipitated)
BS B 31:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard (W(H)) and precipitated)
BS B 32:1991. Specification for copper-beryllium alloy rods, sections and parts (solution treated (W) and precipitated)
BS B 33:1991. Specification for copper-beryllium alloy wire and springs (solution treated (W) and precipitated)
BS C 10:1958. Coupling dimensions for aircraft ground air-conditioning connections
BS C 11:1958. Coupling dimensions for aircraft pressure cabin ground test connections
BS C 13:1960. Sizes of gravity filling orifices on aircraft
BS C 15:1960. Specification for coupling dimensions for aircraft-to-tractor tow bar connections
BS C 16:1973. Specification for dimensions for gaseous oxygen replenishment couplings for aircraft
BS C 17:1973. Specification for coupling dimensions for low pressure air connections for engine starting
BS C 18:1976. Specification for V-flange couplings for aircraft piping and ducting - metric series
BS C 19:1986. Specification for aircraft pressure replenishment connection for engine oil (inch dimensions)
BS C 20:1986. Specification for aircraft gaseous oxygen replenishment connection (inch dimensions)
BS C 21-1:1997, ISO 8267:1997. Specification for interface requirements for aircraft noseleg to towbar attachment fittings.Transport aircraft with a maximum ramp mass over 50000 kg (110000 lb)
BS C 22:1995, ISO 9475:1994. Test methods for aircraft inner tube and tubeless tyre valves. Cores and caps
BS C 3:1964. Specification for aircraft material. Coupling dimensions for aircraft pressure re-oiling connection
BS C 6:1966. Specification for aircraft engine nacelle fire extinguisher doors
BS C 8:1969. Specification for the dimensions of seat rails and pins (metric and inch units)
BS C 9:1970. Specification for coupling dimensions for high pressure air charging valves for aircraft
BS CECC 00009:1982. Harmonized system of quality assessment for electronic components. Basic specification: basic testing procedures and measuring methods for electromechanical components
BS CECC 00012:1985. Harmonized system of quality assessment for electronic components: basic specification: radiographic inspection of electronic components
BS CECC 00013:1985. Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice
BS CECC 00016:1991. Harmonized system of quality assessment for electronic components. Basic specification: basic requirements for the use of statistical process control (SPC) in the CECC system
BS CECC 00017:1994. Harmonized system of quality assessment for electronic components. Basic specification: microwave common modules for use up to 20 GHz. Interfaces, fixings, connection protocol and module coding
BS CECC 00104:1991. Rule of Procedure 4. CECC Working Groups. General rules and additional rules
BS CECC 00108:1991. Rule of Procedure 8. Attestation of conformity
BS CECC 00108:1996. Rule of Procedure 8. Attestation of conformity. The CECC Mark and conditions of use, certificates of approval and procedures for the attestation of conformity
BS CECC 00109:1991. Rule of Procedure 9. Certified test records
BS CECC 00111-0:1994. Rule of Procedure 11. SpecificationsAn introduction to the types of specifications applicable within the CECC system
BS CECC 00111-1:1991. Rule of Procedure 11. Specifications.General regulations for CECC Specifications
BS CECC 00111-1:1994. Rule of Procedure 11. SpecificationsGeneral regulations for CECC specifications
BS CECC 00111-2:1991. Rule of Procedure 11. Specifications.Regulations for CECC Specifications for components of enhanced assessment of quality
BS CECC 00111-3:1991. Rule of Procedure 11. SpecificationsRegulations for CECC Specifications for components for general and professional (civil and military) usage (excluding detail specifications)
BS CECC 00111-4:1991. Rule of Procedure 11. SpecificationsRegulations for CECC detail specifications
BS CECC 00111-5:1991. Rule of Procedure 11. Specifications.Preparation of specifications under the Single Originator Procedure
BS CECC 00111-6:1994. Rule of Procedure 11. SpecificationsRegulations for Process Assessment Schedules (PAS)
BS CECC 00111-7:1994. Rule of Procedure 11. SpecificationsRegulations for component specifications and assessment specifications
BS CECC 00111-8:1994. Rule of procedure 11. Specifications.Regulations for Technology Approval Schedules (TAS)
BS CECC 00112:1991. Rule of Procedure 12. Voting procedures
BS CECC 00112-1:1993. Rule of Procedure 12. Voting procedures.CECC Rules of Procedure and specifications (excluding ENs)
BS CECC 00112-2:1994. Rule of procedure 12. Voting procedures.CECC European standards
BS CECC 00114-0:1992. Rule of Procedure 14. Quality assessment procedures.An introduction to the types of approval available under the CECC System
BS CECC 00114-0:1994. Rule of procedure 14. Quality assessment procedures.An introduction to the types of approval available under the CECC system
BS CECC 00114-1:1991. Rule of procedure 14. Quality assessment procedures.Approval of manufacturers and other organizations
BS CECC 00114-2:1991. Rule of Procedure 14. Quality assessment procedures.Qualification approval of electronic components
BS CECC 00114-2:1993. Rule of procedure 14. Quality assessment proceduresQualification approval of electronic components
BS CECC 00114-2:1995. Rule of procedure 14. Quality assessment proceduresQualification approval of electronic components
BS CECC 00114-3:1991. Rule of procedure 14. Quality assessment procedures.Capability approval of an electronic component manufacturing activity
BS CECC 00114-3:1993. Rule of procedure 14. Quality assessment proceduresCapability approval of an electronic component manufacturing activity
BS CECC 00114-4:1992. Rule of procedure 14. Quality assessment proceduresProcedure for enhanced assessment of quality
BS CECC 00114-5:1993. Rule of procedure 14. Quality assessment proceduresProcess approval of specialist contractors within the electronic components industry
BS CECC 00114-6:1994. Rule of procedure 14. Quality assessment proceduresTechnology approval of electronic component manufacturers
BS CECC 00800:1988. Harmonized system of quality assessment for electronic components. Code of practice for the use of the ppm approach in association with the CECC system
BS CECC 00802:1991. Harmonized system of quality assessment for electronic components. Guidance document: CECC standard method for the specification of surface mounting components (SMDs) of assessed quality
BS CECC 00802:1994. Harmonized system of quality assessment for electronic components. Guidance document: CECC Standard method for the specification of surface mounting components (SMDs) of assessed quality
BS CECC 00804:1996. Harmonized system of quality assessment for electronic components. Interpretation of 'EN ISO 9000:1994'. Reliability aspects for electronic components
BS CECC 00806:1997. Harmonized system of quality assessment for electronic components. Guide to total quality management (TQM) for CECC approved organizations
BS CECC 00808:1996. Harmonized system of quality assessment for electronic components. Guidance document: use and application of plastic encapsulated devices
BS CECC 123400-003:1994. Specification for harmonized system of quality assessment for electronic components. Capability detail specification: flexible printed boards without through-connections
BS CECC 123500-003:1994. Specification for harmonized system of quality assessment for electronic components. Capability detail specification: flexible printed boards with through-connections
BS CECC 16000:1980. Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays
BS CECC 16000-1:1992. Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relaysGeneral
BS CECC 16100:1980. Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing relays
BS CECC 16101:1980. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing relays. Test schedule 3
BS CECC 17000:1984. Harmonized system of quality assessment for electronic components: generic specification: mercury wetted make contact units
BS CECC 17001:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Mercury wetted make contact units for general application
BS CECC 18000:1984. Harmonized system of quality assessment for electronic components: generic specification: dry reed change-over contact units mechanically biased
BS CECC 18001:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: dry reed change-over contact units, mechanically biased, for general application
BS CECC 19000:1979. Harmonized system of quality assessment for electronic components: generic specification: dry reed make contact units
BS CECC 20000:1983. Harmonized system of quality assessment for electronic components: generic specification: semiconductor optoelectronic and liquid crystal devices
BS CECC 200000:1993. Harmonized system of quality assessment for electronic components. Requirements for process assessment schedules for process approval
BS CECC 20001:1983. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: light emitting diodes, light emitting diode arrays
BS CECC 200025:1998. Harmonized system of quality assessment for electronic components. Process assessment schedule: printed board assembly facilities
BS CECC 20004:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: ambient rated photocouplers with phototransistor output
BS CECC 210000:1995. Harmonized system of quality assessment for electronic components. Requirements for technology approval schedules (TAS)
BS CECC 22000:1980. Harmonized system of quality assessment for electronic components: generic specification: radio frequency coaxial connectors
BS CECC 22000:1993. Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)
BS CECC 22110:1983. Harmonized system of quality assessment for electronic components: sectional specification: radio frequency coaxial connectors, series SMA
BS CECC 22111:1983. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connections, series SMA
BS CECC 22120:1981. Harmonized system of quality assessment for electronic components: sectional specification: radio frequency coaxial connectors, series BNC
BS CECC 22121:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connectors, series BNC
BS CECC 23100-003:1991. Specification for harmonized system of quality assessment for electronic components. Capability detail specification: single and double sided printed boards with plain holes
BS CECC 23100-003:1996. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double sided printed boards with plain holes
BS CECC 23100-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double-sided printed boards with plain holes
BS CECC 23200-003:1991. Specification for harmonized system of quality assessment for electronic components: capability detail specification: single and double sided printed boards with plated-through holes
BS CECC 23200-003:1996. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double sided printed boards with plated through holes
BS CECC 23200-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: single and double-sided printed boards with plated through holes
BS CECC 23300-003:1991. Specification for harmonized system of quality assessment for electronic components. Capability detail specification: multilayer printed boards
BS CECC 23300-003:1996. Harmonized system of quality assessment for electronic components. Capability detail specification: multilayer printed boards
BS CECC 23300-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: multi-layer printed boards
BS CECC 23600-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flex-rigid multilayer printed boards with through connections
BS CECC 23700-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flex-rigid double-sided printed boards with through connections
BS CECC 23800-801:1998. Harmonized system of quality assessment for electronic components. Capability detail specification: flexible multilayer printed boards with through connections
BS CECC 25000:1977. Specification for harmonized system of quality assessment for electronic components: generic specification: inductor and transformer cores for telecommunications
BS CECC 25300:1981. Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for power applications
BS CECC 265001:1998. Harmonized system of quality assessment for electronic components. Technology approval schedule. Film and hybrid integrated circuits
BS CECC 299001:1999, CECC 2990001:1999. Technology approval schedule. Manufacture of electrical connectors
BS CECC 30000:1984. Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors
BS CECC 30000:1992. Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS CECC 30100:1986. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene terephthalate film dielectric metal foil capacitors for direct current
BS CECC 30101:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyester film dielectric d.c. capacitors
BS CECC 30101:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current
BS CECC 30200:1986. Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte
BS CECC 30201 001:1981. Harmonized detail specification for fixed tantalum capacitors. Porous anode, solid electrolyte. Cylindrical insulated/non-insulated metallic case, polar/hermetic seal, axial terminations. Basic plus additional assessment level
BS CECC 30201:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Tantalum capacitors with solid electrolyte, porous anode
BS CECC 30201:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
BS CECC 30202:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: tantalum capacitors with non-solid electrolyte porous anode
BS CECC 30202:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
BS CECC 30300:1978. Harmonized system of quality assessment for electronic components. Sectional specification: aluminium electrolytic capacitors
BS CECC 30300:1992. Harmonized system of quality assessment for electronic components. Sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte
BS CECC 30301 024:1981. Harmonized detail specification for fixed aluminium electrolytic capacitors (long-life grade). Non-solid electrolyte. Cylindrical, polar insulated metallic case, clamp or stud mounting screw terminations. Full plus additional assessment level
BS CECC 30301:1977. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: aluminium electrolytic capacitors with non-solid electrolyte
BS CECC 30301:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Aluminium electrolytic capacitors with non-solid electrolyte. (Assessment level E)
BS CECC 30302:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: aluminium electrolytic capacitors with solid electrolyte
BS CECC 30400:1984. Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polyethylene-terephthalate film dielectric capacitors for direct current
BS CECC 30401 023:1979. Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors. Rectangular insulated non-metallic case, rigid radial terminations. Full assessment level
BS CECC 30401 033:1981. Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (long-life grade). Rectangular insulated non-metallic case, rigid radial terminations. Full assessment level
BS CECC 30401:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
BS CECC 30500:1978. Harmonized system of quality assessment for electronic components: sectional specification: fixed metallized polycarbonate film dielectric d.c. capacitors
BS CECC 30500:1989. Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current
BS CECC 30501:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric d.c. capacitors
BS CECC 30501:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed metallized polycarbonate film dielectric capacitors for direct current
BS CECC 30600:1979. Harmonized system of quality assessment for electronic components: sectional specification: fixed ceramic capacitors, type 1
BS CECC 30601:1980. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic dielectric capacitors, class 1
BS CECC 30700:1980. Harmonized system of quality assessment for electronic components: sectional specification: fixed capacitors with ceramic dielectric, class 2
BS CECC 30700:1991. Harmonized system of quality assessment for electronic components. Sectional specification: fixed capacitors of ceramic dielectric, class 2
BS CECC 30701:1980. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic dielectric capacitors, class 2
BS CECC 30701:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2. (Assessment level E)
BS CECC 30702:1993. Specification for harmonized system for quality assessment for electronic components. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2. (Assessment level P. Telecom level)
BS CECC 30800:1978. Harmonized system of quality assessment for electronic components: sectional specification: tantalum chip capacitors
BS CECC 30800:1991. Harmonized system of quality assessment for electronic components. Sectional specification: tantalum surface mounting capacitors
BS CECC 30801:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: tantalum chip capacitors
BS CECC 30801:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Tantalum surface mounting capacitors
BS CECC 30900:1982. Harmonized system of quality assessment for electronic components: sectional specification: fixed polystyrene film dielectric d.c. capacitors
BS CECC 30900:1986. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS CECC 30901:1982. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric d.c. capacitors
BS CECC 30901:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS CECC 31100:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed ceramic dielectric capacitors of barrier layer type (dielectric class 3)
BS CECC 31101:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic dielectric capacitors of barrier layer type (dielectric class 3)
BS CECC 31200:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed capacitors with metallized electrodes and polypropylene dielectric
BS CECC 31201:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors with metallized electrodes and polypropylene dielectric
BS CECC 31300:1983. Harmonized system of quality assessment for electronic components: sectional specification: fixed mica dielectric d.c. capacitors
BS CECC 31301:1983. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed mica dielectric d.c. capacitors
BS CECC 31400:1982. Harmonized system of quality assessment for electronic components: sectional specification: fixed ceramic capacitors of dielectric class 1, for electrical shock hazard protection
BS CECC 31401:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic dielectric capacitors, dielectric class 1, for electrical shock hazard protection
BS CECC 31500:1982. Harmonized system of quality assessment of electronic components. Sectional specification: fixed ceramic capacitors of dielectric class 2, for electrical shock hazard protection
BS CECC 31501:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic capacitors of dielectric class 2 for electrical shock hazard protection
BS CECC 31600:1991. Harmonized system of quality assessment for electronic components: sectional specification. Fixed capacitors with paper and paper/plastics dielectrics
BS CECC 31601:1993. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed capacitors with paper or paper/plastic dielectrics
BS CECC 31700:1986. Harmonized system of quality assessment for electronic components. Sectional specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
BS CECC 31701:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
BS CECC 31800:1988. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS CECC 31801:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS CECC 32100:1992. Harmonized system of quality assessment for electronic components. Sectional specification: fixed multilayer ceramic chip capacitors
BS CECC 32200:1989. Harmonized system of quality assessment for electronic components. Sectional specification: fixed chip capacitors with metallized electrodes and polyethylene-terephthalate dielectric for direct current
BS CECC 32201:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed chip capacitors with metallized electrodes and polyethylene- terephthalate film dielectric for direct current
BS CECC 40000:1980. Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
BS CECC 40100:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed low power non-wirewound resistors
BS CECC 40101 019:1977. Detail specification for fixed low power non-wirewound insulated resistors. Metal oxide film, helically cut. Full assessment level
BS CECC 40101:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors. Assessment level S
BS CECC 40102:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors. Assessment level M
BS CECC 40103:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors. Assessment level P
BS CECC 40104:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors of enhanced quality
BS CECC 40200:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed power resistors
BS CECC 40201:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level S
BS CECC 40202:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level M
BS CECC 40203:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level H
BS CECC 40300:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed precision resistors
BS CECC 40301 001 to 004:1977. Detail specification for fixed wirewound insulated precision resistors. Full assessment level
BS CECC 40301:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed precision resistors
BS CECC 40302:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed precision resistors (Assessment level F)
BS CECC 40400:1990. Harmonized system of quality assessment for electronic components: sectional specification: fixed low power surface mounting (chip) resistors
BS CECC 40401:1990. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound surface mounting (chip) resistors. Assessment level 'S'
BS CECC 41000:1977. Harmonized system of quality assessment for electronic components: generic specification for potentiometers
BS CECC 41100:1978. Harmonized system of quality assessment for electronic components: sectional specification: lead screw actuated and rotary preset potentiometers
BS CECC 41101:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: preset potentiometers (assessment level S)
BS CECC 41101-007:1985. Harmonized blank detail specification for lead screw actuated non-wirewound preset potentiometers. Square form, container sealed, actuating device insulated from resistive element, slipping clutch at each end of travel, rigid terminations. Assessment level S.
BS CECC 41102:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: preset potentiometers (assessment level M)
BS CECC 41200:1979. Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers
BS CECC 41201:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: power potentiometers (assessment level S)
BS CECC 41202:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: power potentiometers (assessment level M)
BS CECC 41300:1979. Harmonized system of quality assessment for electronic components. Sectional specification: low power single-turn rotary potentiometers
BS CECC 41301:1979. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: low power single turn rotary potentiometers (assessment level S)
BS CECC 41302:1979. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: low power single turn rotary potentiometers (assessment level M)
BS CECC 41400:1980. Harmonized system of quality assessment for electronic components: sectional specification: rotary precision potentiometers
BS CECC 41401:1979. Specification for harmonized system of quality assessment for electronic conponents. Blank detail specification: rotary precision potentiometers (assessment level S)
BS CECC 42000:1978. Harmonized system of quality assessment for electronic components: generic specification: varistors
BS CECC 42100:1978. Harmonized system of quality assessment for electronic components: sectional specification: low voltage varistors primarily for telephony applications
BS CECC 42101:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: low voltage varistors primarily for telephony applications (assessment level P)
BS CECC 42200:1988. Harmonized system of quality assessment for electronic components. Sectional specification: surge suppression varistors
BS CECC 42201:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Surge suppression varistors
BS CECC 45000:1977. Specification for harmonized system of quality assessment for electronic components: generic specification: space-charge controlled tubes
BS CECC 45004:1977. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: disc seal power tubes
BS CECC 46000:1978. Harmonized system of quality assessment for electronic components: generic specification: cold cathode indicator tubes
BS CECC 46001:1977. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: cold cathode indicator tubes
BS CECC 50000:1981. Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices
BS CECC 50000:1987. Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices
BS CECC 50000:Supplement No. 1:1983. Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices. CECC assessed process average
BS CECC 50008:1982. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: ambient-rated rectifier diodes
BS CECC 50009:1982. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: case-rated rectifier diodes
BS CECC 51000:1986. Harmonized system of quality assessment for electronic components. Generic specification: mercury wetted change-over contact units, magnetically biased
BS CECC 51001:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: mercury wetted change-over contact units, magnetically biased
BS CECC 52000:1987. Harmonized system of quality assessment for electronic components. Generic specification: mercury wetted change-over contact units, mechanically biased
BS CECC 63000:1985. Harmonized system of quality assessment for electronic components: generic specification: film and hybrid integrated circuits
BS CECC 63000:1990. Harmonized system of quality assessment for electronic components. Generic specification: film and hybrid integrated circuits
BS CECC 63100:1985. Harmonized system of quality assessment for electronic components: sectional specification: film and hybrid integrated circuits
BS CECC 63101:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film and hybrid integrated circuits
BS CECC 63200:1985. Harmonized system of quality assessment for electronic components: sectional specification: film and hybrid integrated circuits (capability approval)
BS CECC 63201:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film and hybrid integrated circuits (capability approval)
BS CECC 64000:1990. Harmonized system of quality assessment for electronic components: generic specification: film resistor networks
BS CECC 64100:1990. Harmonized system of quality assessment for electronic components: sectional specification: film resistor networks (qualification approval)
BS CECC 64101:1990. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film resistor networks (qualification approval)
BS CECC 64200:1990. Harmonized system of quality assessment for electronic components: sectional specification: film resistor networks (capability approval)
BS CECC 64201:1990. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film resistor networks (capability approval)
BS CECC 68100:1991. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (capability approval)
BS CECC 75100:1984. Harmonized system of quality assessment for electronic components. Sectional specification: two-part and edge socket connectors for printed board application
BS CECC 75101:1984. Specification for harmonized system of quality assessment for electronic components. Example detail specification/blank detail specification. Two-part and edge socket connectors for printed board application
BS CECC 75201:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Interim example. Detail specification/blank detail specification. Circular connectors for frequencies below 3 MHz
BS CECC 75301:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Interim Example. Detail specification/blank detail specification: rectangular connectors for frequencies below 3 MHz
BS CECC 90000:1985. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS CECC 90000:1991. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS CECC 90000:Addendum No. 1:1983. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits. Internal visual inspection
BS CECC 90100:1983. Harmonized system of quality assessment for electronic components: sectional specification: digital monolithic integrated circuits
BS CECC 90101:1980. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL circuits, series 54, 64, 74, 84
BS CECC 90102:1980. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL-SCHOTTKY circuits, series 54S, 64S, 74S, 84S
BS CECC 90103:1980. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL low power SCHOTTKY circuits, series 54LS, 64LS, 74LS, 84LS
BS CECC 90103:1983. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL low power SCHOTTKY circuits, series 54LS, 64LS, 74LS, 84LS
BS CECC 90104:1981. Specification for harmonized system of quality assessment for electronic components. Family specification: C. Mos digital integrated circuits, series 4000B and 4000UB
BS CECC 90104:1990. Specification for harmonized system of quality assessment for electronic components. Family specification: C. MOS digital integrated circuits series 4000 B and 4000 UB
BS CECC 90105:1983. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fusible link programmable read only memories, silicon monolithic integrated circuits
BS CECC 90105:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fusible link programmable bipolar read only memories, silicon monolithic integrated circuits
BS CECC 90106:1984. Specification for harmonized system of quality assessment for electronic components. Family specification: advanced low power TTL SCHOTTKY integrated circuits
BS CECC 90107:1985. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL FAST circuits
BS CECC 90108:1986. Specification for harmonized system of quality assessment for electronic components. Family specification. Digital integrated TTL advanced SCHOTTKY circuits
BS CECC 90109:1986. Specification for harmonized system of quality assessment for electronic components. Family specification. Digital integrated HC MOS circuits series HC/HCT/HCU
BS CECC 90110:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: digital microprocessor integrated circuits
BS CECC 90111:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. MOS read/write static memories silicon monolithic circuits
BS CECC 90112:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. MOS read/write dynamic memories silicon monolithic circuits
BS CECC 90113:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. MOS ultra-violet light erasable electrically programmable read only memories silicon monolithic circuits
BS CECC 90114:1990. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: programmable logic arrays (PLA)
BS CECC 90115:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: digital gate array integrated circuits
BS CECC 90200:1983. Harmonized system of quality assessment for electronic components. Sectional specification: analogue monolithic integrated circuits
BS CECC 90200:1988. Harmonized system of quality assessment for electronic components: sectional specification: analogue monolithic integrated circuits
BS CECC 90201:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated voltage regulators
BS CECC 90201:1990. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated voltage regulators
BS CECC 90202:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated operational amplifiers
BS CECC 90202:1990. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated operational amplifiers
BS CECC 90203:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated analogue switching circuits
BS CECC 90300:1985. Harmonized system of quality assessment for electronic components. Sectional specification: interface monolithic integrated circuits
BS CECC 90300:1988. Harmonized system of quality assessment for electronic components. Sectional specification: interface monolithic integrated circuits
BS CECC 90301:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated line transmitters and receivers
BS CECC 90302:1986. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated voltage comparators
BS CECC 96000:1987. Harmonized system of quality assessment for electronic components. Generic specification: electromechanical switches
BS CECC 96100:1988. Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: rotary switches
BS CECC 96200:1988. Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: lever switches
BS CECC 96300:1988. Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: sensitive switches
BS CECC 96400:1988. Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: push-button switches
BS CECC 96601:2002. Blank detail specification. Slide switches
BS CECC 96701:2002. Blank detail specification. Dual-in-line switches
BS CEN/TS 1793-5:2003. Road traffic noise reducing devices. Test method for determining the acoustic performanceIntrinsic characteristics. In situ values of sound reflection and airborne sound insulation
BS CISPR 12:1997. Vehicles, motorboats and spark-ignited engine-driven devices. Radio disturbance characteristics. Limits and methods of measurement
BS CISPR 16-1:1998, CISPR 16-1:1998. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus
BS CISPR 16-1:1999, CISPR 16-1:1999. Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatus
BS CISPR 16-2:1996, CISPR 16-2:1996. Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunity
BS CISPR 16-3:2000. Specification for radio disturbance and immunity measuring apparatus and methodsReports and recommendations of CISPR
BS CISPR 16-4:2002. Specification for radio disturbance and immunity measuring apparatus and methodsUncertainty in EMC measurements
BS E9007:1975, CECC 00007:1973. Specification for harmonized system of quality assessment for electronic components: Basic specification: Sampling plans and procedures for inspection by attributes
BS E9063:1976, CECC 45002:1975. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: industrial heating triodes
BS E9065:1976, CECC 45003:1975. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW
BS E9073:1976, CECC 30200:1975. Specification. Harmonized system of quality assessment for electronic components: sectional specification for tantalum capacitors
BS E9076-1:1976, CECC 30100:1975. Specification. Harmonized system of quality assessment for electronic components: sectional specification for polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use.Polyester film capacitors with metal foil electrodes
BS E9111 N001:1975, CECC 40 101 004. Harmonized detail specification for fixed low power non-wirewound insulated resistors. Metal film, helically cut. Full assessment level
BS E9111 N002:1975, CECC 40 101 005. Harmonized detail specification for fixed low power non-wirewound insulated resistors. Metal oxide film, helically cut. Full assessment level
BS E9111 N003:1975, CECC 40 101 006. Harmonized detail specification for fixed low power non-wirewound insulated resistors. Carbon composition. Full assessment level
BS E9111 N006:1976, CECC 40 101 011. Harmonized detail specification for fixed low power non-wirewound insulated resistors. Metal oxide film, helically cut. Full assessment level
BS E9111:Supplement No. 1:1976, CECC 40101:1975. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors
BS E9114 N001:1976, CECC 40201 002. Harmonized detail specification for fixed power wirewound insulated resistors. Vitreous enamel protection. Full assessment level
BS E9372:1976, CECC 50002:1976. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: ambient-rated bipolar transistors for low and high frequency amplification